Mail 8.0 deleted email content when using mail drop

Using Mail 8.0 on Yosemite 10.1 I just spent a very long time answering an email. I attached a PDF of 30 MB before sending and the window to say it would be sent via mail drop appeared. I clicked Yes.
Later I checked sent messages to see the email I wrote and make sure it all went through OK. However, in the email only a link to the mail dropped PDF was there, and all the text I wrote had disappeared.
Nothing in sent, or saved boxes. It's a Gmail account, so I checked sent messages from the web interface for Gmail  and also there was just the link.
I did a test and sent another email with said attachement and some random text, and it came out ok, it even had a fancy download button rather than some super long link.
What is going on? can I get my email back? Please help!

I've had - and am having -- all kinds of problems with Mail 8.0.  Is there an update yet to fix the many, many ISSUES with 8.0?
I am ready to ditch the program unless fixes are forthcoming.

Similar Messages

  • Deleted emails found when using new search function in 3.0

    When I do a "search iPhone" I see a list that contains emails that were deleted, some as old as two months. These found emails do not exist in my Comcast account, and they were deleted from Trash. I thought I was not storing any emails on my iPhone, but I can actually call them up.
    How do I get rid of these "deleted" emails?
    I hope this hasn't been covered too much already, but I could not locate a thread.

    I too have done some search's today in the new search function and found deleted e-mails. I use bigpond for e-mails and they get sent to my phone. I then delete them from my phone and trash box and delete them from my e-mail. Using my computer and bigpond my e-mail account has 33 e-mails that I can find. Doing a search on my phone with this new sortware update I can find 870 e-mails which I believe date back to december last year when I got the phone. Some e-mails are VERY sensitive business wise and deleted as required at the time. But if a work person was to pick my phone up they could do a complete search of all my emails without the requirement of a password. If I let someone make a call on my phone, they can get to all the emails that have ever been through my phone within seconds if they choose. A patch or update is needed!!! This fault would hinder business from wanting to use Iphones.
    Is there a way to fix this? and how soon?

  • Deleting emails automatically when using a POP email

    Hi
    Is there a way of deleting any emails automatically from my POP email when i've deleted them in mail on my iphone 4?
    I have my email set up correctly with push switch to on and everything else seems to sync up fine, but when i log into my webmail account or Outlook on my laptop the emails that i've deleted on my iphone are still listed in the inbox as unread.
    Any ideas anyone?
    G

    There are settings in your mail configuration to delete when ... One option is to say delete when removed from Inbox.
    Thus when you delete it, then the NEXT check of mail it will let the server know to delete them.
    Have to remember, POP was not designed for todays world of mobile devices and checking in multiple places. It was a basic protocol for people to check from one place.
    Consider using IMAP if your service allows it.

  • How do you stop needing to verify email password when using yahoo.att with Mac Mail

    How do you stop needing to verify email password when using yahoo.att with Mac Mail?

    Nevermind, I fixed it (I think).  I went into Settings | Accounts & Sync and found Yahoo at the bottom of the list (alphabetically).  I selected it and it had an optiion to delete the account, which I did.

  • How do I delete emails? When I try to delete a message comes up saying unable to move to trash.

    How do I delete emails? When I try to delete a message comes up saying unable to move to trash.

    There are a few things that you could try. First try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
    If that doesn't work then try closing the Mail app via the taskbar : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    And if the above don't work then try going into Settings > Mail, Contacts, Calendars. Then select the account on the right-hand side of that screen, select Account, then Advanced, Deleted Mailbox, and under On The Server tap the 'Trash' folder so that it gets a tick against it - then come out of that series of popups by tapping on the relevant buttons at the top of them and then see if you can delete emails.

  • Illustrator CS4 crashes when using save drop down menu on MacBook Pro Yosemite

    Illustrator CS4 crashes when using save drop down menu on MacBook Pro Yosemite. Just purchased a new laptop and it has Yosemite installed.

    Hi Parisian tiger
    What happens when you try to open any file from the same location where you are saving the file using Save As command ?
    Will it be possible to join a connect session with me ?
    Please do let me know about your time availability ?
    Thanks & Regards,
    Raghuveer Singh
    [email protected]
    Time Zone: +5:30 GMT (IST)

  • Unable to delete emails from care4free using thunderbird

    I have just bought an imac and have transfered my thunderbird account from my old pc. I am unable to delete messages from my care4free POP account. Anyone help with this please?

    Problems associated with deleting or moving email usually stem from failure to compact mail
    folders, especially inboxes. This is because deleted email is not removed from the
    application until you compact (expunge is the technical term). This can be done
    automatically by a setting in your email account. Manually is simple enough. On any mail
    folder do this: right click/compact (or File/Compact Folders). This is especially important
    on inboxes but also, any folder from which you regularly delete/move email.
    If you are experiencing problems you probably have a lot of uncompacted mail so be patient
    the first time and watch the activity bar for its status (at the bottom of the application).
    Mario Pauls
    Running Thunderbird 24.3.0
    Windows Vista Home Premium
    Used Thunderbird with Lightning integrated since 2005
    Find more useful info here:
    http://forums.mozillazine.org/viewtopic.php?f=39&t=2638361
    rais
        Posts: 951
        Joined: May 25th, 2011, 8:57 pm
    Post Posted January 7th, 2013, 6:47 pm
    two things just for starters:
        Archive all the mail currently in the Inbox
        http://kb.mozillazine.org/Archiving_your_e-mail
        enable AutoCompact
        http://kb.mozillazine.org/Compacting_fo ... omatically
    Last edited by rais on January 8th, 2013, 3:01 am, edited 1 time in total.

  • Modify the email contents when adding a colleague in SharePoint My site

    Hi I want to modify the mail that is sent to the person I add as a colleague in mysite.
    I want to modify the mail content.
    Regards
    Vinod

    Hi,
    According to your post, my understanding is that you wanted to modify the email content for adding colleagues alert.
    After some search and research, I have found that It is not
    supported way of modifying text/format of email that goes out when a colleague is added.
    The text/format is hard coded in a private method (Microsoft.Office.Server.UserProfiles.ColleagueManager class) in an assembly that ships with SharePoint.
    For the normal list, we can modify the content by edit the XML file of
    alerttemplates.xml. We can find it in the below path.
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\XML
    http://sharepoint.stackexchange.com/questions/26172/can-the-added-as-colleague-email-text-format-be-changed
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • More log writer contention when using JDBC Batch Updates?

    So if I'm already seeing log writer contention when I'm commiting inserts one row at a time.
    Why would I see even more contention of log writer ie. commit waits in Enterprise Manager when I batch these inserts using JDBC updates.
    Today I observed significantly more commit waits when I used JDBC batching vs commit one row at a time.

    Please refer
    http://www.oracle.com/technology/products/oracle9i/daily/jun07.html

  • Emails rejected when using Verizon SMTP

    When using Verizon SMTP Emails are rejected. Why is Verizon on these lists?    Action: failed
    Status: 5.0.0 (Rejection greeting returned by server.)
    Remote-MTA: dns;mx00.emig.kundenserver.de
     (TCP|206.46.173.17|62383|212.227.15.40|25)
     (kundenserver.de [mxeue002] Nemesis ESMTP Service not available)
    Diagnostic-code: smtp;554-kundenserver.de (mxeue002) Nemesis ESMTP Service not
     available No SMTP service IP address is black listed. For explanation visit
     http://postmaster.1and1.com/en/error-messages?ip=206.46.173.17&c=bip

    I had the same error when sending to someone who had 1&1 as the email service provider. Your message cannot be delivered to the following recipients: Recipient address: [email protected] (redacted)Reason: Rejection greeting returned by server.Diagnostic code: smtp;554-perfora.net (mxeueus004) Nemesis ESMTP Service not available No SMTP service IP address is black listed. For explanation visit http://postmaster.1and1.com/en/error-messages?ip=206.46.173.7&c=bipRemote system: dns;mx00.1and1.com (TCP|206.46.173.7|24645|74.208.5.3|25) (perfora.net [mxeueus004] Nemesis ESMTP Service not available)

  • How do i recieve email alerts when using find my iphone

    how can i recieve email alerts when find my iphone is used

    You don't, this is a new security measure.
    you can send apple a feed back here http://www.apple.com/feedback/

  • How do I accurately detect overset contents when using tables?

    Hello, all. I am familiar with how to detect overset contents of a text frame, namely:
    if ( myTextFrame.parentStory.contents.length > myTextFrame.contents.length) {
      alert('There is overset text');
    } else {
      alert('There is no overset text');
    However, the contents of my story are three tables, rather than text. Each table contains dozens of cells filled with text. Yet the "length" property of the frame is only 3! How do I accurately read the length of the content given that most of it is in tables so that I can test for overset text?
    In case it helps anyone, a more detailed description is:
    If there are three tables in the story, and only 2 fit on a page-sized text frame, the length property of that frame will be 2. Kind of weird, but not a problem yet.
    In the same scenario, however, if the third table BEGINS on the page but spills over (creating an overset situation), the length property of that frame will be 3 -- causing the test think there is NO overset text! InDesign simply sees 3 characters in the story, and only 3 characters on that page.
    When I look at the "contents" property of the story, it just reads 3 squarish characters. They're obviously some kind of special character. InDesign apparently takes the concept of "table" and just writes a placeholder character for it in the "contents" property.
    Am I going to have to create some routine to loop through every cell of every table and somehow add it all up to get a proper length? How do I just test for overset-ness?
    Thank you!

    Actually, Harbs, I'd already just burst my own bubble by running additional tests! So I have to revise my whole set of instructions.
    IGNORE EVERYTHING I WROTE ABOVE.
    Here is the revised solution, based on the initial solution proposed by Dirk and then revised to work around Harbs bug discoveries. It is essentially a corrected version of Dirks line. Instead of saying:
    app.activeDocument.stories.item(0).tables.lastItem().cells.lastItem().insertionPoints.last Item().parentTextFrames.length
    you would say:
    app.activeDocument.stories.item(0).tables.lastItem().cells.lastItem().parent.parent.insert ionPoints.lastItem().parentTextFrames.length
    That's just the short version. Here's the full code and explanation:
    Summary of problem:
    InDesign treats a table as a single special character, so it does not accurately report the "overflows" property of a text frame containing a table which spills beyond its margins. A text frame will show as not overflowing (i.e. myTextFrame.overflows will return false) if its final table simply begins within its margins--even if most of the table spills well beyond the text frame. So a ten-page table that starts on page one will only considered by InDesign scripting as being one character long (and therefore shown as fitting completely in first frame even when it doesn't). The solution for this, as discovered by Dirk, is to test whether the final cell of the table is in an overflow area.
    The solution:
    You cannot just test whether the cell is overflowing, or whether the parent text frame is overflowing, because InDesign will misreport them and their contents when they are in an overflow area, making it impossible to distinguish a cell overflow from a containing-text-frame overflow. So we just check the parent text frame of the final insertion point, which is after the last table, and see if its length is zero (meaning has no visible contents). If so, the insertion point is in an overflow area!
    So the test to run is this:
    var finalCell = myTextFrame.parentStory.tables.lastItem().cells.lastItem();
    if(finalCell.parent.parent.insertionPoints.lastItem().parentTextFrames.length==0) {  ...your code here...  }
    Of course you'll replace myTextFrame with the one you're dealing with in your own script.
    Example usage:
    This is how I implemented this in my own script. I have an array of text frames which I pass to this function, and by the time I call the function this array contains only one element, just the first large text frame (with my long table already placed inside it). It also relies on a helper function drawTableFrame which is simple and I'll leave out; it just adds a text frame to the new page and sizes it. And of course myDocument I've long ago set to be the document I'm working in.
    // Takes array of text frames, checks for overflow, and adds pages as needed
    function addOverflowPages(whichFrameArray) {
        var i = 0;
        var finalCell = whichFrameArray[0].parentStory.tables.lastItem().cells.lastItem();
        while (finalCell.parent.parent.insertionPoints.lastItem().parentTextFrames.length==0) {
            i++;
            var newpage = myDocument.pages.add(); // add new page
            whichFrameArray.push(drawTableFrame(newpage)); // draw new frame
            whichFrameArray[i].previousTextFrame = whichFrameArray[i-1]; // link new frame to previous one
    I hope this one is solid at last. I have tested it with empty final cell, full final cell, partially-overflowing final cell, and totally-overflowing final cell, and they all work for me. Thanks again to everyone for pointing me in the right direction!

  • IPod arbitrarily deletes all music when using movie sync

    well well well. i lost all 20GB of my music on ipod when selecting 'sync movies'. i now have a smart playlist called 'music videos' with nothing in it and an empty music library. having had what could best - and most politely - be described as a nightmare when using 'sync music', i most definitely did not have that option checked.
    any advice on possible retrieval? i don't have my previous music on my computer, i depended on my ipod, as i've not memory to play with.
    OR - any way i can get compensation for this fault? as you can imagine, it tooks many days of diligent importing form hard copies to get it done.

    Hi Andrew;
    You might get more replies if you post your question over on the iPod forum.
    Allan

  • Change document serie when using a drop shipment warehouse

    Hey all,
    I have the following question:
    We have a customer wich has 2 document series related to purchase orders.  When we use a drop shipment warehouse in our sales documents the SAP system runs the procurement wizard to add a purchase orders related to the sales order.
    Now our customer wants to choose the correct document serie to post the purchase order in.
    I've already tested this with SAP 8.81 PL 08 but for the moment this is not supported.
    If you take a look at the MRP functionality, there is a possibility to change the document series when creating Purchase orders from the order recommandation screen
    Will this be on the roadmap of SAP?

    Drop-down lists work a little differently than expected; in the Change event the rawValue contains the previously selected text.  That's why it works the second time.  The current selection is contained in: xfa.event.newText

  • When I use hotmail to reply an email, the content of the mail I am answering not included.How can I keep the emails content when I forward or reply the mail?

    How to keep the content of email (hotmail) in firefox when to forward or reply the mail. This is not the case when I use Internet Explorer.

    See this:
    https://support.mozilla.com/en-US/kb/Blank+messages+in+Hotmail

Maybe you are looking for