Mail accounts stop working after few time or sleep

Hi everyone. First at all sorry about my english.
Since few days ago, and probably after run onyx, im experiencing a bug in Mail.
When i start mail, everything its ok. Its works perfect.
But, after maybe 2 hours running (usually i have mail on autostart), i see that all my acounts have the triangle on it.
I click on the triangle and tryed to reconnect all accounts but it does nothing. All of them still not working.
I run the test and all accounts have the red mark of error.
It usually happends when i awake the macbook after sleep.
It has easy solution. Close mail, and open mail again and is ok, everything working normaly, but after some time i have the same problem.
Any suggestions?
Thank you.

If I first delete the accounts, doesn't all the mail I've already got get dumped?
Could I avoid this?
How do I troubleshoot first? It works so well that I've not had to do this.

Similar Messages

  • GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it

    I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.

    Hi Syed,
    I have also started facing the exact same problem since the past few months with my docomo service.
    Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
    But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
    Did you upgrade to iOS 5 and did it help?
    PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
    Regards,
    Hemant

  • Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Hmmm, here's the opposite problem/fix...
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch
    Is your gMail POP or IMAP?
    If IMAP...
    Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password

  • Touchscreen stops working after waking up from sleep

    Touchscreen stops working after waking up from sleep sometime it not working at all.
    IT encore2 WT8-B32CNM

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • Mail app stopped working after upgrade to Mavericks

    Dear All,
    I have updated from Mountain Lion (Macbook Pro 3,1, 256SSD) to Mavericks, and mail app stopped working.
    That means - when I click the icon - the app does not work.
    I can see that it downloads mail - as when I click it I receive notifcation that it has downloaded some mail, however I cannot open window. Sometimes I manage to open it, but it is totally unresponsive - I cannot change or click anything in it.
    I have tried repairing disk permissions but without any success.
    Moreover if I run mail app and try to click "new message" from the top bar, the window that appears is somewhat mixed with my wallpaper backround (I can see fragments of it).
    Please help me, as I had there a few gigs of precious mails that I don't want to lose...
    Thank you in advance!
    Olek

    Do a backup.
    Take notes of all account information or take screen shots. You may need to set the accounts up again. Quit Mail.
    Copy the line below.
    ~/Library/Containers/com.apple.mail
    Select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won’t see it.
    Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Relaunch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library Directory in Mac OS X 10.7 Lion & 10.8 Mountain Lion
    You might want to bookmark the command. I had to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Hi, my name is Amit, my hot corners stop working after some time. Have to go to mission control to reset them, however they stop again after some time. This is annoying. Can someone please assist to solve this problem? Thanks Amit.

    Hi my name is Amit, after upgrading to OS X Maverick I often have problem of my Hot corners stop working after a short period of time. I have to go to mission control and have to reset them for them to start working again. However this is temparory and they stop working again and this is quite annoying. Can someone suggest a cure to this problem please. I will be grateful. Thanks Amit.

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.dock.plist
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out or restart the computer and test. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place. Log out again. Otherwise, delete the item you moved.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • First USB port stops working after random time and won't work until I restart

    Hey guys
    I have this problem on my late 2011 Macbook Pro 13 inch,
    It's been for a year already and it really freaks me out and drive me crazy
    My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
    If I restart my computer, USB stops working after 3 days and won't respond until I restart
    If I log off it works for like a couple of hours and then stops again
    I have tried EVERYTHING, SMC reset - no luck, PRAM reset - same results, Upgraded to lion same results, Upgraded to mountain lion - SAME RESULT
    And I can't take it to an apple store because I'm not from the US
    I am 100% sure this is a software problem and I've seen here that many people have faced this problem
    Please help, it really freaks me out

    ElectroSpyzz wrote:
    Hey guys
    I have this problem on my late 2011 Macbook Pro 13 inch,
    It's been for a year already and it really freaks me out and drive me crazy
    My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
    If I restart my computer, USB stops working after 3 days and won't respond until I restart
    If I log off it works for like a couple of hours and then stops again...
    I'm sure this isn't what you want to hear but unless you really are using your laptop 24 hours a day, is there any reason why you don't just shut it down and reboot when you're ready to use it again? I have to wonder how many other MacBook Pro owners potentially have the same problem but when they quit computing for the day, their computers quit too.

  • Mail sending stops working after a day

    I have a strange behaviour with my email accounts. I noticed the problem first when I updated to the new 2.0 software. After restoring the phone, I set up my two email accounts (one MobileMe and one "other" from my university). Both receiving and sending from the two accounts works perfectly. After usually a day or so, emails suddenly won't send anymore. When I hit "send", it says "Sending..." on the bottom of the screen but nothing happens anymore.
    I can get rid of this "blocking" email by turning off the phone, but that doesn't solve the problem. The next email I try to send again stalls and does not go out. The only way of fixing it is a full Restore and setting it up as a new phone (not using any previous backups).
    Does anyone here have the same problem? I read about many users who get error messages when they try to send emails, but this seems to be a different problem. It is also unrelated to the account settings, since I tried it with two different mail accounts.
    Any help is appreciated!

    Yep - I got this yesterday, and twice again today ...
    yesterday, I dropped a line to my ISP (using web-mail from our iMac), and later, with no word from them, I found I could send e-mails again ... no idea whether they did anything or not, but from a previous thread somewhere else on Discussions, I'd heard that ISPs have various automated ways to deal with spams & viruses & the like, and that sometimes individuals get caught up in this & get blocked (and that ISP tech' help generally don't see this, blame the customer's set-up in some way, and so don't resolve ... )
    then, today, when it happened again, instead I went straight to Settings, Mail ... , Account ... and found the Outgoing Mail Server / Advanced / Server Port number had changed from what it had been yesterday (after editing it, and backing out, I could send again)
    and when it happened yet again, I did the same & found the Incoming Mail Server Password had disappeared (typed it in, backed-out, and ... still couldn't send, so repeated the excercise & this time it worked - my typing or what, no idea)
    HTH - no idea if it's a bug in Mail or the OS (we're on 2.0.2), just coincidence, or ... whatever !!

  • ADFapplication stops working after few days of uptime : invalidobjname

    We are currently doing uptime testing of our prodcut. We are using JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493. After 3 days uptime our application stops working and we are seeing following errors in the log :-
    oracle.jbo.InvalidObjNameException: JBO-25005: Object name ViewDefMetadataManager4569314_-2147483397 of type View Row Set is invalid.
    at oracle.jbo.server.ViewObjectImpl.getRowSetName(ViewObjectImpl.java:12683)
    at oracle.jbo.server.ViewObjectImpl.createViewRowSet(ViewObjectImpl.java:12728)
    at oracle.jbo.server.ViewObjectImpl.createViewRowSet(ViewObjectImpl.java:12718)
    at oracle.jbo.server.ViewObjectImpl.getDefaultRowSet(ViewObjectImpl.java:2567)
    at oracle.jbo.server.ViewObjectImpl.setIterMode(ViewObjectImpl.java:11165)
    at oracle.adf.model.bean.DCDataVO.init(DCDataVO.java:148)
    at oracle.adf.model.bean.DCBeanDataControl.executeIteratorBindingIfNeeded(DCBeanDataControl.java:996)
    at oracle.adf.model.binding.DCIteratorBinding.executeQueryIfNeeded(DCIteratorBinding.java:2168)
    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3253)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
    at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2889)
    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3202)
    at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2889)
    at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareRender(FacesPageLifecycle.java:82)
    at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$5.before(ADFPhaseListener.java:516)
    at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:77)
    at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:45)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:237)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:131)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.epm.fm.servlets.ExternalHfmSecurityServlet.doFilter(ExternalHfmSecurityServlet.java:60)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:181)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Looking at the trace it iloks weird that it is adding a -ve integer -2147483397 into the instance name.
    Edited by: Abhishek on Apr 20, 2013 8:20 AM
    Edited by: Abhishek on Apr 20, 2013 4:16 PM

    After looking at ADF source code, ApplicationModuleImpl.doCreateViewObject() is referring to JboNameUtil.getInstNameFromDefName() which is using a static counter (int value) as suffix. The counter being an int value is reaching the upper limit and then turning out to negative when incremented and then leading to above exception.
    In above stack trace the instance name is ViewDefMetadataManager4569314_-2147483397 , has a negative number at the end. So JboNameUtil.isNameValid(rsName) is returning false and the exception InvalidObjNameException is thrown at that point.
    If this is the case, it appeared to be ADF bug.
    Have you tested the application with application module pooling turned off? It might be an activation/passivation problem.
    We use bean data control, no pooling configuration set.
    Do you work in a cluster environment?
    Yes but ADF is installed on a single server (Weblogic)
    Do you see any more nested errors in the log?
    This was the first error . After that we see same error whenever any of the UI is opened but with different VO name
    Is it always three days before the error does up?
    This is the first time uptime test is spawned to 3 days for this release
    Does the application work after a refers or new login?
    No, on new login , we see same error whenever any of the UIs is opened but with different VO name with -ve number at the end
    Which operating system does the server run on? How much memory is installed?
    Windows server 2008 , 16GB
    Was there a high cpu usage at the time of the error?
    We are testing it using load runner and multiple users

  • On Windows 8, some widgets, such as the menu button near the upper right, stop working after some time, and functionality is restored by rebooting the PC.

    I use the latest releases of Firefox as they become available on a Windows 8 PC. Firefox works properly, usually for a few hours, before annoying problems manifest. The problem I'm addressing here is some widgets, including some Firefox widgets and isolated widgets (such as buttons and pull-down selectors) in some websites stop working. In Firefox, the Menu button (the three stacked dashes icon) stops working. And the Download arrow sometimes stops working also. Sometimes, sub-items such as Print stop working. For some pull-downs, the up and down arrow keys might still work even though I might now be able to select with the mouse. Closing and reopening Firefox usually restores some functionality. However, I usually have to reboot the PC to restore all functions which stopped working. Then I am good for usually a few hours again. Another annoyance, which others have addressed, is the eventual appearance of Chinese-looking characters on the tab labels bar across the top. Restarting Firefox gets rid of these for the time being. Thanks for investigating.

    hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    the oriental characters are a displaying flaw caused by the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
    http://service.mcafee.com/faqdocument.aspx?id=TS100162
    https://community.mcafee.com/thread/76071

  • Replication DS6.2 - DS5.2 stops working after some time

    Hello!
    After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint.
    I have 2 masters DS5.2 and two masters DS6.2.
    Replication is working fine for some days. E.g. last time the replication was working until 29.11.
    But at some point the replication stops working and I get the following errors in the errors log:
    [28/Nov/2007:10:51:16 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d3d84000002bd0000, s
    equence number 1, ignoring it
    [28/Nov/2007:12:48:09 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d58e9000002bd0000, s
    equence number 1, ignoring it
    [28/Nov/2007:19:06:55 +0100] - INFO: 29398 entries in the directory database.
    [28/Nov/2007:19:06:55 +0100] - INFO: add:107, modify:0, modrdn:0, search:3651, delete:0, compare:0, bind:2763 since startup.
    [29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474eb18e00001a360000
    [29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474eb18e00001a360000
    [29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
    c=de, csn = 474eb18e00001a360000
    [29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:13:34:05 +0100] - WARNING<20805> - Backend Database - conn=328186 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
    objectClass=*)' scope='sub'
    [29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:15:45:46 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed41b00001a9a0000
    [29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed41b00001a9a0000
    [29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
    c=de, csn = 474ed41b00001a9a0000
    [29/Nov/2007:15:46:03 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    Since the replication was not working I had to initialize the DS6 masters again:
    [29/Nov/2007:16:03:59 +0100] - import hvb: Index buffering enabled with bucket size 76
    [29/Nov/2007:16:03:59 +0100] - import hvb: Beginning import job...
    [29/Nov/2007:16:04:20 +0100] - import hvb: Processed 14166 entries -- average rate 674.3/sec, recent rate 674.2/sec, hit ratio 0%
    [29/Nov/2007:16:04:41 +0100] - import hvb: Processed 22598 entries -- average rate 525.5/sec, recent rate 525.5/sec, hit ratio 100%
    [29/Nov/2007:16:05:03 +0100] - import hvb: Processed 31591 entries -- average rate 493.6/sec, recent rate 405.4/sec, hit ratio 100%
    [29/Nov/2007:16:05:05 +0100] - import hvb: Workers finished; cleaning up...
    [29/Nov/2007:16:05:17 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replica (dc=hvb,dc=de) has been initialized by total protocol
    as full replica
    [29/Nov/2007:16:06:56 +0100] - WARNING<20805> - Backend Database - conn=334334 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
    objectClass=*)' scope='sub'
    [29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed92e00001a360000
    [29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed92e00001a360000
    [29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
    c=de, csn = 474ed92e00001a360000
    I tried to change a password. But the replication failed again and since than the replication is working again.
    [29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    But I'm sure that after some days there will be a problem again.
    Sometime there are also the errors:
    [29/Nov/2007:16:27:05 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
    SN 474ed8d5000002590000, DB error 5 - I/O error
    [29/Nov/2007:16:27:05 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
    ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
    [29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
    smmucqsu08.sys.hypovereinsbank.de:10636]
    [29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
    smmucqsu08.sys.hypovereinsbank.de:10636]
    [29/Nov/2007:16:27:06 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
    SN 474ed8d5000002590000, DB error 5 - I/O error
    [29/Nov/2007:16:27:06 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
    ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
    [29/Nov/2007:16:27:06 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
    smmucqsu08.sys.hypovereinsbank.de:10636]
    I tried to reproduce the problem.
    At the moment everything works fine and I can do many changes.
    But I know that there is somewhere a problem and the replication will stop working again in the next days.
    Can you give any advise?
    Regards,
    Beate
    Edited by: 72716 on Nov 30, 2007 10:05 AM

    Here is an explanation of the failure:
    1. Prioritized replication was introduced with DS6.0;
    2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
    3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
    A work-around:
    Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
    pwdIsLockoutPrioritized:FALSE
    Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
    1. The default password policy at any DS6 instance (cn=password policy,cn=config);
    2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
    3. Any password policy added to a DS6 instance.
    Additionally, do not set any prioritized replication rules for other attributes.
    It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
    Contact Sun support for the status of a fix for the bug. The CR is 6645742.

  • Multitouch Gestures Stop working after some time in Mountain Lion

    I have a problem with Multitouch Gestures on Macbook Pro, using Mountain Lion. After some time 3 thinger swipe to left/right stops working. The only thing that helps to solve this problem is making a restart. Are there any other ways to get rid of this problem?

    Me too. My iMac and MBP same here. Having graphics glitches when playing games neither in Mac or Bootcamp with Windows. Sometimes screen even slashed into half and freezed. Wake up from sleep also have graphics issues, like I need to use the crusor to oaint out the grey login screen, if not, it will stay white. Slowly moving the crusor will paint back the grey background.

  • TS3899 mail account stops working

    My btinternet mail account no longer works on my ipad. I have tried uninstalling and reinstalling. I receive a message saying that the server is unavailable

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Mail/Provide Mail Feedback

  • Clicks don't work after few times on same shopping page

    When shopping on a page I can only successfully click 2 or 3 times &amp; then I have to refresh before clicks work again! It used to be fine until recently. I did get my screen repaired &amp; wondered if that would affect it.  Can anyone pls help?

    Yes would have been whole screen as about a quarter of it was shattered when it slipped out of my hands. I didn't get it fixed for a while &amp; didn't have any issues with it broken. But why would it work few times on certain page &amp; then "jam"?

  • Why would only one of my Mail account stop working?

    I have a MacBook Pro running 10.6.8 and I use Mail 6.4.  I have several e-mail addresses all ending n the domain that I own.  For no reason today, one of the accounts will not download.  Mail does not indicate tat there is anay problem.  When I go into my domain, new messages are there, but they are not downloaded.  The account is working on my iPad and iPhone so the problem must lie with Mail.  I have changed absolutely no settings.  I do not want to get rid of the account and start oveer since I will lose all the messages form the account that I have in my folders.  Does anyone have any idea what could be happening and what I can do about it?  Thanks.
    Sass

    I found the problem!!! A misbehaving rule was moving all the messages that were tagged with that address into a folder that was set up for only one of the senders.  Eventhough I told the rule to assign the sender to the folder it decided to sort all the mail from the account to it!!!
    Thanks for the help - knowing how to test things with a 2nd administrators account will probably come inhandy again sometime!
    Now to go tame that rule!
    Sass

Maybe you are looking for