Mail Activity show more then sent

I've noticed more and more that when I send one letter that the mail activity monitor will show that it is sending 2, 3, 4 and sometimes 5 things. What is it sending other than my one email?
Thanks
Mark

Greetings,
If you're using an IMAP mail account, this is perfectly normal. With IMAP, your account is actually on the mail server, and the Mail program on your Mac is just a mirror image of the account. So if you send a message from Mail, it is sent to the server, which also communicates with Mail so that the two are always in sync.

Similar Messages

  • My mail activity shows more than 1 million incoming messages and is moving in lots of 10 thousand - this is happening periodically  - what is wrong?

    Ever since I upgraded to Mavericks my mail has been periodically showing incoming messages at larger and larger volumes.   Sometimes in the hundreds of thousands and today in the millions.  Clearly I don't have that going on  - it seems to eat my resources for a bit and then stops - I have no idea what is going on.  Suggestions?

    It is a bug. Quit Mail and then reopen it. Should fix it.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Mail/Provide Mail Feedback

  • 10.9.4 Mail activity shows incoming mail downloading but does not put in mailbox

    Been testing all day with no results.
    The hosting company says there is no problem at there end. All mail can be found the their webMail.
    iMac Mail connection doctors show all good connections.
    Mail activity shows incoming mail downloading but does not put in mailbox, they simply disappear.
    Still searching for a fix for this serious issue. 
    Any ideas or a proven solution is most welcome.
    -Thanks in Advance -

    Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
    Rebuild mailbox
    and/or
    Try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
    Reindex messages

  • HT201317 My photostream photos show more then 30 days of photos and have only just set my computer up with the  icloud, is there any way I can get photos on my computer from more then 30 days ago?

    My photostream on my iphone shows more then 30 days of photos, however I have recently lost my phone and hadn't set up the icloud on my computer until now. Is there anyway to get all the photos in my photostream on my iphone or just the last 30 days?

    If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
    iOS: How to back up
    Also, if yoo have that backup you can extract the photos by:
    Recover iPhone, iPad or iPod photos from backups with Picturescue
    If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • Mail Activity shows multiple sends for 1 send

    Just a curious little bug. When I send one email, the Mail Activity panel at lower left shows anywhere from 2 to 6 emails being sent. It should show 1. Has anyone else seen this?

    Try not to worry to much about that. Remember, depending on the type of network connection you have, the email client, and the size of the file, the email will not always be sent in one heap.. instead the mail program and the email host and he various servers it may go through to get the infomation to where it needs to it will chunk the infomation into multiple packets, and it will go through multiple servers before it gets to its destination. I would sugest syncronyzing your accuonts, and f you need to rebuild your inbox. But try not to worry about that to much that it shows seveal times in your activity monitor.

  • Using SQL developer, how to show more then 1 table at at time ?

    Hi, everybody
    I am able to open more then 1 procedures/functions for editing.
    However i am not able to open more then 1 table for seeing the data and columns.
    1) how do i open more then 1 table tab in sql developer or i am not allow to do so ?
    2) is it possible to see what column is the foreign key of a table in sql developer ?
    thanks once again :)

    use freeze view button
    and drop table below from tabs
    http://www.oracle.com/technology/products/database/sql_developer/files/viewlets.html
    watch this viewlet
    Useful Features of SQL Developer (July '07)
    it can show u how u can see more than one table at a time

  • IPad mail icon shows more emails than there actually is?

    My iPad shows more unread emails than there actually is - How do I fix this?

    I figured it out! Clicked on EDIT then clicked on "mark as unread," on the bottom of the page; then clicked "mark as read," and it was fixed.

  • Mail activity show incoming mail, but no emails shows up.

    3days ago my emails stopped showing up, though I am still receiving them on my Ipad. My activity shows that emails are coming in, they just aren't showing up in my folder.  I have checked the connectivity Dr. And it shows green lights.  I am not offline.  I am out of my element so any suggestions need to be pretty specific.

    Care to share which OS & email client you are using? 

  • I write one email, Mail Activity shows 2 are being sent out

    OK, where is a copy of my email (2 of 2) being sent?
    Has General "Tap" Hayden of the NASA hacked my Mac?
    [email protected]

    Hello X:
    Welcome to Apple discussions.
    As a suggestion, I would not post my E-mail address in any forum. You are opening yourself up for a spammer attack.
    Oddly enough, I have a similar "doubling" of the count in my inbox. The system indicates 30 - I actually get 15. I have ignored it as I have not actually received double messages. In my case, it could be because I use a different mail source (AOL) and have Apple's mail application point to the AOL mail server.
    Barry

  • SMTP sent mail not showing up in sent mail folder

    Hello,
    Setup:
    Exchange 2010 SP1
    Outlook 2010
    C# for sending mail, or Pentaho Kettle
    Not really sure how to explain, but I have the following scenario:
    Automatic programs send email using credentials (an active username / password on the domain. account linked to a mail box).
    Mail gets sent.
    Mail does not show up in the sent mail folder of the account
    I was wondering if there was a parameter on the Exchange server to configure so that the email sent via SMTP would show up in the sent mail box of the account.
    Regards,

    Hi Olivier,
    For your query, I would also suggest you seek the solution in the Development Forum:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrdevelopment/threads
    Frank Wang
    TechNet Community Support

  • Problem with showing more then one report in loop!

    Hi!
    In my form i have loop like
    for i in 0..l_tab.count loop
    multi_choise.g_izpis := l_tab(i);
    execute_trigger('key-print');
    end loop;
    in key-print trigger i have something like this
    case multi_choise.g_izpis
    when 1 then
    mbf_reports.run_report_web('test1.rep',
    p_other_prms=>'p_id=' || :users.user_id)          
    when 2 then
         mbf_reports.run_report_web('test2.rep',
    p_other_prms=>'p_id=' || :users.user_id);
    when 3 then
         mbf_reports.run_report_web('test3.rep',
    p_other_prms=>'p_id=' || :users.user_id);
    end case;
    in procedure mbf_reports.run_report_web is the built-in web.show_document.
    In my form i have a box with multi choise option. If i chose all of three it opens three windows but sometimes shows me test1 and 2 times test3.
    If i only put message like
    for i in 0..l_tab.count loop
    multi_choise.g_izpis := l_tab(i);
    message('something');
    execute_trigger('key-print');
    end loop;
    it works perfectyl. I wonder why?

    I found it it. Synchronize solved the problem.

  • WRT54GC Router showing more then one network

    My WRT54GC has been shutting down my internet. When I look at available networks on my computer it shows one secure and one unsecured. When I enter a wep key to get in the network it creates another one so I have Linksy secure network when I access it it creates Linksy secure network 1, 2 etc. It does the same with the one it shows as unsecured. I talk to my ISP and they said my internet is out of range and shuts down. Any ideas on how to fix this?
    Thanks

    First of all, in the router, give your network a new unique SSID. Do not use your old SSID.  Do not use "linksys".   If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Next, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys".  Delete any networks with your old SSID.   Also delete any network that you do not recognize, or that you no longer use.  Reboot computer.  Return to "Preferred Networks" and enter your new network info (the new SSID, encryption (if any), and key (if any) ). Then select your new network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".  Reboot computer.  Your computer should connect automatically to your router (it can take up to 2 minutes).  If you still have trouble, temporarily turn off your computer software firewall and try again to connect.
    If the above does not fix your problem, download and install the latest driver for your wireless adapter.
    Some users have reported improved wireless performance by switching from WEP to WPA encryption.
    Also note:
    For WEP, enter WEP "key 1"  (found in the router)  into your computer, not the WEP password or passphrase.
    For WPA or WPA2, enter the key (sometimes called password or passphrase)  into your computer.
    If you are able to connect to your new SSID, but you still see your old SSID listed in "available networks", then your old SSID is either from your neighbor using the same SSID, or it is simply a "ghost" listing (caused by your wireless adapter software) which is not real and which will disappear in a few days.
    Message Edited by toomanydonuts on 12-29-2009 03:44 AM

  • E-mail Issue in More then one Contact Person

    Hello Experts,
    I Have One Customer : C20000
    In this Customer having the five contact person and email for that
    now i have creating sales Order and Click on Email Button in Tool Bar,
    Now i want to automatically all five contact person  in To column and email address of respective column in send message window
    Is it Possible through FMS  ?
    Then How ?
    Please Write the query  for that
    Dixit Patel

    Dear Rahul,
    I know the distribution list,
    but I want when Click on Add Recipient and Click on Distribution List,
    Automatically come to those Customer Code in Find field through FMS
    So I have select that List Name
    Dixit Patel

  • Mail Activity Weirdness

    When I click the "Get Mail" button the Mail Activity shows twice the amount of mail I receive. For example, the Mail Activity will show "receiving 8 of 8 messages." However, only four messages will show in the Inbox. I have a Mobile Me account. Are these four messages also being sent to my Mobile Me account? If not, where are they going?
    Many thanks in advance.

    Is it always precisely twice as much? If not, you've probably got some spam in there that's being filed in the Junk mailbox.

  • Charts - More then 15 value in X axis

    Hi guys,
    I couldn't find how to show more then 15 value in X axis in 2D column chart. It only shows 15 values in default. I searched Chart xml but i couldnt find that which code block i need to change..
    Could you pls help me.?
    Thanks

    I just find out.
    There is an option to set Maximum Rows. It is on the series query editing page under the query text region..
    Thnks

Maybe you are looking for