Mail adapter, All tags are in one line in the  output message

Hi PI gurus,
I'm facing a problem in my scenario SRM to JMS, my output mail is not suitable for my case since i don't get each tag per line, iu2019m getting the whole xml in one line
Edited by: hakimos on Jul 13, 2010 2:45 PM

> I'm facing a problem in my scenario SRM to JMS, my output mail is not suitable for my case since i don't get each tag per line, iu2019m getting the whole xml in one line
XML generated by PI does not have any whitespaces, so it is aleays in one line.
That should not be an issue at all.

Similar Messages

  • In Apple Mail, I cannot add more than one address to the "To" line

    In Apple Mail, I cannot add more than one address to the "To" line by typing just the initial

    HHow are you. Trying to add the second address? Normal procedure after the first address is to type a comma, then start typing the name for the second address.

  • Hi,  I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

    Hi,
    I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

    What program are you using for this editing?
    We can ask a Host should move your query over to that forum.

  • I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line.  When I put a comma in, the recipient's address is deleted.  If I use ' ' with more than one recipient the save grays out.  Any thoughts?

    am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line.  When I put a comma in, the recipient's address is deleted.  If I use '< >' with more than one recipient the save grays out.  Any thoughts?

    I figured it out.  I needed to fix some errors in my account information.  It works fine now.

  • TS1424 All of my books in iBooks have the following message:  "this page has the following errors:  error on line 1 at column 1 document is empty error on line 1 : encoding error..,...". Any advice?

    All of my books in iBooks have the following message:  "this page has the following errors:  error on line 1 at column 1 document is empty error on line 1 : encoding error..,...". Any advice?

    I have the same problem. I've tried to restart my Ipad and downloaded the book again several times but nothing has changed. There aren't any reviews on the book with that problem and I've got the latest version of iBook so I don't know what else I can do to get the book which I've paid for. Does anyone have another idea what I could do? (maybe one of the above might help you, Paul)
    Thanks

  • How do I combine all my calendars into one and delete the others?

    I have a work computer, a home desktop, and Apple air laptop and an 1phone 4s.
    I use Outlook calendar for all my appointments and only need one calendar.
    When I get notifications of my upcoming events on the Oulook page and on my iphone, I get multiple notifications, sometimes as many as 6 times.
    How can I combine all my calendars into one and delete the others?

    Your old account is the one you migrated, but it has been renamed because the new account had the same name. "Fixing" this is a bit complicated. It is possible to transfer data from one account to the other. See Transferring files from one User Account to another.
    A cleaner solution is to do this:
    Create a temporary new admin user account with a completely different username.
    Log into this new account.
    Delete the new account you created before migrating.
    Delete the old account you migrated that has the changed name.
    Re-migrate your old account from the Mini.
    Log into the newly migrated account and delete the temporary account.
    And, the simplest solution is to use the migrated account as-is and delete the account you originally made on the new computer.

  • I recently upgraded iPhone4S to iOS7. Now photos on my phone look like photo negatives; all colors are a ghostly contrast. The same is true for icons of downloaded apps. What can I do?

    I recently upgraded iPhone4S to iOS7. Now photos on my phone look like photo negatives; all colors are a ghostly contrast. The same is true for icons of downloaded apps. What can I do?

    Invert the colors back to normal.

  • Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

    hi friends
    using `n   how can i add two empty line (two carriage return), between these two lines in the output file?
    PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
    PS C:\> $Env:USERDOMAIN  | add-content c:\file.txt
     i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt   but it results in 
    myPCMyDomain
    but i wanted the contents of the output file be like this:
    MyPC
    #empty line here 
    #empty line here
    MyDomain
     i tested many other forms but didn't work.
    thanks

    I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
    You are using a Unicode file.  Locale is what?
    If you just want notepad compatible line breaks then do this:
    del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
    Look in hex to see that `n is ^L or 0xA and is only one character.  CrLf is 0xD 0xA - two characters.
    My programmers editors and VS all understand a single ^L as a line break so does PowerShell.  Only DOS/Notepad and other utilitis don't understand this..
    ¯\_(ツ)_/¯

  • How to pass tag name and value dynamically in the output of PCo notification?

    Hi,
    I have a requirement to develop such a scenario where there can be multiple no of tags in PCo (Say 10) but there will be single notification to push the tag name when the value got changed and the changed value to MII. for any value change for any of the tag, the notification will be trigger. So As per my knowledge I have to pass the tag name and value dynamically in the "output" tab of the notification. But need your support to find out how to pass them dynamically.
    Thanks in advance.
    Regards,
    Suman

    Hi Suman/Jeedesh,
    As per Pco notification, it will trigger whenever any of the tag value changes in Agent instance subscription items.
    For above issue, My suggestion
    1. Create DB table name TAGLIST with 200 tags as rows in columns (Tagname, TagValue)
    2. Based on notification trigger, create a transaction and update values w.r.t TagNames in above table
    3. Next time, when notification trigger with fresh value for any of the tag, cross check with existing TagName with Value and update in DB table.
    4. And in the mean time, send those Tag details vie mail trigger or as per requirement
    Instead of creating 200 notification, above is a just alternate way suggestion to achieve dynamic tag value change notification.
    Hope it might solve your problem
    Regards,
    Praveen Reddy

  • Why is one iphone displaying the text messages of the other 2 iphones in my house?

    Why is one iphone displaying the text messages of the other 2 iphones in my house?

    That would be imessage and not text message.
    As stated by sberman, it's because the users are sharing apple id.
    On each devices - settings - message - send&receive- remove or uncheck the apple ids.

  • Everytime I send my husband a text or he sends me one, we get the same message instantly as a reply

    everytime I send my husband a text or he sends me one, we get the same message as a reply. or if I try to send a picture to my email it sends it back to my phone. how do I fix this?

    Go into settings-facetime-iphone cellular calls
    Turn it off (grey)
    On both devices.
    Good Luck

  • Animate like the lines in all layers are drawn one after another

    Hai there,
    With my inkling pen i've created a drawing for PS. It now contains 30 layers, each one has a line. I would like to animate these lines/layers, so it looks (in an animated gif) like the lines are drawn one by one.
    Is there a "quick" way to do so?
    Thanks in advance!
    p.s. first post here...!

    Hi, Pascal.
    I see what you mean. I was playing around with the Action idea that I had, and it may not work as I had thought it would in my head. There's a limitation with Actions, that doesn't allow the "Select Forward Layer" shortcut to select hidden layers, which makes my idea useless.
    Unless someone else on this forum can figure out a quicker way, which is very possible, I'd give my first suggestion a shot for now.

  • Spry, horizontal menu, need all menu buttons on one line

    hi in DW CS4I would like to understand why the spry menu that I have doesn't line up on a straight line horizontally. sometimes it lines up correctly in DW, but when I either go to live view or publish it, one of the menu buttons goes on the next line. If they are all on the same line, sometimes the menu does not go to the end of the other side of the div tag that it is inside of. If you have an article or any tips that you may have, please do share as i am going insane. I guess I should stick to CSS, but I often have the same problems as well.
    Thank you.
    I currently do not have  URL for this website.
    Please see the code attached to this post.

    Simply, your menu list items are too wide (altogether) to fit on the same line.
    I see that you have defined your div#container as 1000px, and your div#nav_bar as, well, it will default to 1000px. Then you have set your MenuBar to 80% of that width, and your list items as 16.8% of that.
    So far, everything is flexible.
    When you get down to ul.MenuBarHorizontal a, however, you have set padding: padding: 0.5em 0.75em; If you change your padding units to percentages, you should be able to find acceptable measures that will allow your list items to remain on one line.
    Keep in mind that, as the following references notes, in some browsers padding is measured in addition to the stated width of your element:
    http://en.wikipedia.org/wiki/Internet_Explorer_box_model_bug
    So make sure ALL your percentages add to 100%...including the horizontal padding (for both sides!) and the width (don't add in the vertical padding...that could be left as is). Actually, add them up to slightly less than 100% for comfort. If you get a gap at the end of the menubar, center the menubar and apply a background to the containing div.
    Beth

  • All events are now one!

    iPhoto 7.1.5
    OS 10.6.8
    All 7692 photos are in one event, the first event of many that previously existed.  Opened iPhoto and all of the other events had disappeared.  Had just performed Time Machine backup and possibly had iPhoto open during the backup.

    Simply restore from Time Machine?
    Or, use the Autosplit Selected Events command in the Events menu.
    Regards
    TD

  • Can no longer send or get mail. All settings are correct. Worked fine before.

    I can use a secondary account but not my primary yahoo.verizon account. Verified all settings are correct but the password was erased. After re-entering password a message says I have to verify my password by entering it at www.yahoo.com. However, I DO NOT have a Yahoo email account. It is a Verizon email account partnered with Yahoo.

    OS X Mail: Troubleshooting sending and receiving email messages

Maybe you are looking for