Mail adapter as sender and receiver

hello.
i made the scenario of Mail as sendeer and receiver, when as receiver it gives an error sayin "Mail: error occured: java.io.IOException: server does not support PLAIN or LOGIN authentication"...
i saw the web blog 1798 by Prasad ulagappan...over ther i see that in the screen shots the option for connection parameter for mail server is ther and thers no option for the kind of authentication which is ther in sp13...
i checked and unchecked both of them but gives error...
any suggestions..
Regards..
vishal

Hi
Just now i chk my scenario on SP13 using reciever mail adapter, and my scenario runs successfully.Try giving these values in Connection Parametersfor Mail Server in ur adapter as they works fine for me.
URL: URL of ur mail server
Check the box of Configure User Authentication.
Authentication Method: Plain
User: System User Name
Password: System Password
Hope it helps.
Regards
Arpit Seth

Similar Messages

Windows live mail will only send and receive on my...

Hi there, windows live mail will only send and receive on my sub account but not my default account
Regards
Mike,
Solved!
Go to Solution.

MIKETANGO wrote:
No initial please an old age pensioner at this end
What is WLM? Windows Live Mail
Outgoing port 465 does not work only 110 works You need to change the Ports and security settings to those that I posted or your signing into BTMail servers will not be accepted. See the link below.
incoming port 995 does not work only 25 works As above
when I use BT Yahoo both accounts work okay
When I use Windows live mail (which I prefer to use) only second account works but not main account (default account)does not work????
I have checked out all the other criteria you say.
I have spent the last 2 weeks with Windows live mail and they say everthing is okay at there end and should resolve this problem with you???
Have a read through this link and the part about Windows Live Mail and how to change it for BTMail.
http://bt.custhelp.com/app/answers/detail/a_id/47531/kw/setting%20up%20windows%20live%20mail/c/346,6...

Mail has stopped sending and receiving

My phone has stopped sending and receiving email. When i follow the troubleshooting on line it tells me to go into advanced settings and swithc the smtp server to on and then off again. Unfortunately when I get to that screen, its frozen, and wont let me move the sliders across.
Has anybody had the same issue, or know how to fix it??

Yup, iCloud Mail is snafu'd.
Always worth checking at http://www.apple.com/support/icloud/systemstatus/ for the status, before deciding the fault's at your end.
Often, it isn't - and if I'd checked that in the past, I'd have saved myself several totally unnecessary password resets.

For those new to mail with issues sending and receiving mail

I was surprised that I did not see anyone referring to this amazing and invaluable tool, the Mail Setup Assistant:
http://www.apple.com/support/macosx/mailassistant/
This tool get's me through troubleshooting sessions more than anything else. Most problems are due to settings when it comes to Mail. Half the time issues with sending emails is just due to SMTP settings, sometimes you do not need to have Authentication for outgoing mail. Sometimes your password is just incorrect. Use Mail Setup Assistant it is pretty **** accurate I use it on a daily basis.
Sometimes the settings are perfect and sometimes you just have to erase mail completely by doing:
~/library/preferences/com.apple.mail.plist pull.
~ refers to your home folder!
Hope this helps!

It is a very good idea, however many of us do not live in the USA, so cannot yet take advantage of this tool.
Pity!

Mac Mail Configuration of Sending and receiveing multiple accounts

Hi
when setting up an account in apple / mac mail below are my configs:
pop.rediffmailpro.com
smtp.rediffmailpro.com
now i need to configure 3 accounts with these details and also be able to send out email with same account. It was working before when i had the same settings on my earlier pop server as the outgoing server but now this is not allowing me 2 add the other 2 accounts for outgoing. Says same server name so stays offline. What do i do? Any suggestions will be very helpful.
preeti

how do i delete this? i was too impatient to wait for answers so figured out was pretty simple

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

HT201320 Unable to step my outlook account keep getting warning unable to verify account I can send and receive mail on my iMac using the outlook account HELP

Unable to setup my ipad for my outlook account I keep getting the message unable to verify, although I can send and receive mail from my iMac using the same outlook account.

Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.

Prerequisites for Sender and Receiver FTP adapter

Hi Experts,
I am new to PI and configuring simple file to file scenario. I need to know the prerequsites for sender and receiver FTP adapter. Scenario is System A -> XI -> System B .
What I want to know is:
1> What ports need to be opened?
2> Any service that I need to activate?
3> Do I need to install FTP server in any of the machine?
If I have missed something, please add.
Br,
Nilz

Hi,
1> What ports need to be opened?
mentioned in below link as said its 21.
2> Any service that I need to activate?
No
3> Do I need to install FTP server in any of the machine?
THere are two ways by which u can pick ur file.
1) NFS by which u can put the file on XI appplication directory and pick up ur file.
2) FTP u have to put ur file on FYP server and XI will pick up the file from there. U can use freeware FTP and install it on ur Desktop search on goolge u will get ti FTP installtion.
refer the below configuration requirement for FIle adapter.
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
ALso refer the end to end file to file scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
chirag

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Determine Sender and Receiver in adapter module?

All,
Non-XML messages from different senders are received via the same JMS queue. In the text payload, the ID of the sender and receiver is contained.
Would it be technically possible to develop a JMS adapter module that sets the Sender Party, Sender Service, Receiver Party and Receiver Service based on the content of the message payload? Is it possible to influence sender and receiver in an adapter module?
Kind regards, Guy Crets

Hi Steven,
It seems like you can not convince XI to pick up a new message. The code below works when you use "inputModuleData.setPrincipalData(msg);" but not with "inputModuleData.setPrincipalData(msgnew);".
The error in the Runtime Workbench is: "Catching exception calling messaging system' found, cause: javax.transaction.InvalidTransactionException: Cannot invoke call from within a transactional context.".
I tried to set the RefToMessageId on the new message, but this does not work either.
Does anybody know why the InvalidTransactionException is thrown?
Here is the example code:
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException
try {
    Message msg = (Message) inputModuleData.getPrincipalData();
    Context ctx = new InitialContext();
    ConnectionFactory cf = (ConnectionFactory) ctx.lookup(
      com.sap.aii.af.ra.ms.api.ConnectionFactory.JNDI_NAME);
    MessageFactory factory = cf.createMessageFactory("XI");
    Message msgnew = factory.createMessage(
      msg.getFromParty(),msg.getToParty(),
      msg.getFromService(),msg.getToService(), msg.getAction());
    msgnew.setConversationId(msg.getConversationId());
    msgnew.setDocument(msg.getDocument());
    inputModuleData.setPrincipalData(msgnew);
catch (Throwable t)
    ModuleException me = new ModuleException("MyException");
    throw me;
return inputModuleData;
Best regards,
Simon

BizTalkServer 2010 SFTP Adapter from CodePlex - Configuring send and receive locations with SSH public and private keys

Hi there,
I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
For Send port: 1. we would need to encrypt the file with our business partners public key
                      2. sign the file with our private key.
                      3. Send the file through to SSH client which eventually transfers to Remote server.
Receive port:   1. Connect to SSH Server with SSH-2 key and receive the file
                      2. Verify the file's digital signature agaisnt the Business partners PGP public key
                      3. Decrypt the file using our PGP Public key
Thanks in advance

Yes it is supported.
You can find its documentation in this link
You can find section X.509 Certificate Identity Keys
You can set public and private key in property SSH Identity thumbprint of send and receive port
I prefer to test it using client tool like
FileZilla or WinSCP then test it using sftp adapter
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Code to retrive the sender and receiver interface names using custome adapter module

Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.

Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM

How to build an E-mail sending and receiving application in Windows Azure?

I am a beginner Windows Azure Developer and I am trying to build applications like Gmail, Hotmail, YahooMail, etc. However, I am unable to build such an application. I have come to know how to send e-mail using SendGrid. Even, I don't know how to configure
to receive e-mails. Please help me on how to develop such an application in windows azure.
Regards

hi Yash,
Thanks for posting!
About how to send mail using sendgrid, I suggest you could try this tutorials firstly via smarx's blog(http://blog.smarx.com/posts/emailtheinternet-com-sending-and-receiving-email-in-windows-azure).
It supplied the method and code sample you could download . You may need create a listener to listen on the right port on workrole always.
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I upgrade to yosemite, when I have to send and receive mail is very slow

When I upgrade to yosemite, when I have to send and receive mail is very slow. Mails take a long time to be send and receive, and the mail boxes disconnect frequently. I am using the yosemite mail server and don't have this issue with user with Maverick.
Many Thanks

So let me see if I understood it right... In Mavericks you didn't had this issue, this only happens in Yosemite and you are using Apple Mail, not another mail client. Have you tried in System Preferences > Internet Accounts unchecking and rechecking the email checkbox on your account?? If that doesn't works try deleting and adding your account.
Sorry for the bad English

Mail adapter as sender and receiver

Similar Messages

Maybe you are looking for