Mail-Adapter: Examine Sender & Receiver E-Mail adress?
Hi everybody,
we send successfully a mail to the Mail adapter. Because of problems with our excahnge server we would like to find out the sender & receiver E-Mail adresses.
I cant see them neither in the communicaiton channel nor in the payload of the RWB message monitoring.
Any ideas?
Regards Mario
Hi, I found it.
I did not check the drop-down to payload on tab message content.
Regards Mario
Similar Messages
-
Configuring Mail Adapter as sender
Hello,
I'd like to ask for some help with configuration of SAP XI mail adapter as sender. I made a communication chanel with mail adapter type and specified transport protocol POP3, URL (pop3://localhost), user, password and poll interval. The problem is that XI doesn't trigger the
process, in other words it doesn't connect to my email server to receive the mail. What could be wrong? To test the environment, I made a test case withmail adapter as a receiver - and it works ok - it sends mail via my email server - so SMTP is working fine.
Thank you,
Igor> I'd like to ask for some help with configuration of
> SAP XI mail adapter as sender. I made a communication
> chanel with mail adapter type and specified transport
> protocol POP3, URL (pop3://localhost), user, password
> and poll interval.
The correct URL is: pop://localhost
Which Mail-Server do you use?
Regards
Stefan -
Do we need to create the mx records if the send/receive the mail in the same organization?
1,May I know do we need to create the mx records if we send/receive the mail in the same organization?
2,If we send /receive the mail between two different organization/forest, we need to create the mx records ,is it right?
Please click the Mark as Answer button if a post solves your problem!1,May I know do we need to create the mx records if we send/receive the mail in the same organization?
2,If we send /receive the mail between two different organization/forest, we need to create the mx records ,is it right?
Please click the Mark as Answer button if a post solves your problem!
for 1. If you mean the same Exchange org, no.
For 2, it depends. You need a MX record for your receiving SMTP server ( At least, You *should* have one), but if sending to another org, not necessarily, as you could smarthost messages to it and a MX would not be required.
Just curious, what problem are you trying to solve?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
I am having a problem sending/receiving e mail messages on my iPhone 5 and cannot access my account. The message I am receiving is: The user name or password for "imap.gmail" is incorrect.
I do not know what imap.gmail is. I have also lost data which was contained on my diary which I believe is linked to the problem. Does anyone recognise this problem?
Cheers,
MorredMorred wrote:
I am having a problem sending/receiving e mail messages on my iPhone 5 and cannot access my account. The message I am receiving is: The user name or password for "imap.gmail" is incorrect.
I do not know what imap.gmail is. I have also lost data which was contained on my diary which I believe is linked to the problem. Does anyone recognise this problem?
Cheers,
Morred
imap.gmail is the Google mail server. It doesn't recognize the password that is stored in the iPhone. The problem is that the password or email address you have in Settings for the gmail account is wrong. If you changed the password somewhere else that is the reason. You need to go to Settings/Mail,Contacts,Calendar, tap on the gmail account and enter the correct password. You also need to change it for outgoing mail in Settings. -
Hello,
I have a BLACKBERRY CURVE 9300
i would be most grateful if someone could help me with persistent problems, which ive previously enlisted the help of T-mobile to resolve but to no avail.
1) I am unable to send/ receive e-mails, this has been an ongoing problem which seems to sort itself out for a short while then returns, i have been asked to remove e-mail accounts from device and re-boot, and as i say works for a short time then starts again.
2) I have this annoying black square in the middle of the screen with like a second hand whizzing round which can sometimes last ages. I was told by t-mobile this was due to not doing regular device updates, i have since done this and as i type continue to see this symbol.
Any advice/suggestions would be gratefully received.
Thankyou.
Andrew GoodallThe spinning clock is usually an indicator of low memory. Make sure you are completely closing apps your aren't using by using the close or exit option in the menu instead of just backing out of the app with the escape key. Also check your memory after you have rebooted your device. If it is still low then you may have to delete apps you absolutely don't need or use to get memory back.
As for the email issue I am assuming you have a data plan since you have tried to fix the problem with Tmobile. If you haven't done so you may have to re-register your phone on the network and or log into Tmobile's BIS site to resend your service books. -
Sateillite A200-1A9: Issue with sending/receiving E-mail using Windows Mail
Using Windows mail I have to close/open the programme to be able to send mails, they get stuck in the Outbox. By closing and reopening the programme the mail gets sent. Also the Blue figure 1 in brackets showning 1 unread mail in the Outbox is there all the time although there is no mails read or unread in the Outbox
Not a server problem as all mails are going/receiving fine on my desktop.
Pressing send and receive button does not help. although some of the time it will receive mails when pressing send/receive but will not send them
I do have Norton Internet security 2007 and am getting fed up with the continuing problems that this seems to cause over the period 2004-7.
Is there an issue with the Windows mail programme running with Vista that is knownI think I have found a solution
Please check this:
Windows Mail will not Send or Receive mails
http://support.toshiba-tro.de/kb0/TSB7701X30005R01.htm
It seems that the update of Software Desktop SMS to the newest version will help to sort out this problem. -
My e-mail account is sending out spam mails; how can i delete the virus?
My e.mail account is sending out spam mails; I have got a spam virus probably during download of my e.mails over the i phone. How can i detect and delete the virus?
You do not have a virus on your Mac or iPhone.
An AOL account is accessed as an IMAP account with the Mail app or email client on your Mac, and with the iPhone's Mail app. The sent spam messages being available in the account's Sent mailbox means your AOL account has been compromised.
Change the password for your AOL email account. -
Email attachment name in sender mail adapter to the receiver file adapter
HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
VamsiHi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel -
Mail adapter as sender and receiver
hello.
i made the scenario of Mail as sendeer and receiver, when as receiver it gives an error sayin "Mail: error occured: java.io.IOException: server does not support PLAIN or LOGIN authentication"...
i saw the web blog 1798 by Prasad ulagappan...over ther i see that in the screen shots the option for connection parameter for mail server is ther and thers no option for the kind of authentication which is ther in sp13...
i checked and unchecked both of them but gives error...
any suggestions..
Regards..
vishalHi
Just now i chk my scenario on SP13 using reciever mail adapter, and my scenario runs successfully.Try giving these values in Connection Parametersfor Mail Server in ur adapter as they works fine for me.
<b>URL:</b> URL of ur mail server
<b>Check</b> the box of <b>Configure User Authentication</b>.
<b>Authentication Method</b>: Plain
<b>User</b>: System User Name
<b>Password</b>: System Password
Hope it helps.
Regards
Arpit Seth -
My ISP tells me I need to change the port to send/receive mail, as the current port is going to be disabled for security reasons. But I can't remember my Mail password to add an account. How can I add an account when I don't remember my password? It's been several years.
your email password is with your ISP so they can help. but if it is saved in the email app you can just change the ports in the preferneces without a password.
-
Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advanceHi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support -
Losing New Mail Notification after send/receive
Hello,
I have a Treo 800w with WM6.1. Experienced same problem also with HTC Mogul on WM6.0.
My yahoo email and work exchange email are setup via IMAP. The new mail notification works when a new message is received. However, upon the next send/receive, even if the message has not been viewed, the new mail icon and notification goes away. As a result, I cannot utilize any reminder feature, even third party that will work past the duration of my send/receive interval. Does any fix exist for this?
Thanks for your help
Post relates to: Treo 800w (Sprint)Mail only shows a flag in the Dock for new mail when it arrives in the Inbox; you can't get around this. But you can add this functionality to ALL mailboxes if you download and install this item:
http://www.macupdate.com/download.php/13292/MailEnhancer-10_3.dmg
Be sure to follow the directions and it should work without a problem.
Mulder -
Cant send receive e-mail on 3G network
I have e-mail with sbcglobal and Gmail. T-mobile is my 3g provider. With N900 I cannot send or receive e-mails on 3G network. However, it works fine when I am on wifi. Does anyone have any suggestions on how to solve this problem.
Solved!
Go to Solution.Narf, I'll use same tree
So, I suspect that problem is on network (although my operaton elisa seems to disagree). Problem is that my 3G or so connections do not work now without having a call on somewhere - well at least you can call and surf at the same time but
ppl are getting **bleep** if I call them all-the-time without anything to discuss
3G works with diff operator sim, its only 3g use thou, but works. I wonder could this be some sim card problem again? Yh?
And another operators sim works too (saunalahti, uses same network than elisa?). Anyone had this king of problem? Is it me or my device or am I again right and the network sucks (they dont like my exessive traffic
-j -
I have a hotmail email address. I compose my mail useing MS outlook. when i send the mail to my contacts useing my macbook air,my contacts tell me there have not received the mail.
when i send the same message with my ipad or iphone no problem my contacts receive the mail.
what is the problem?Blair84 wrote:
Double check your contacts email, and if its incorrect, go to their contact and change it and save it or you can delete the email you put in, and manually type it in.
Hope this helps.
How would that help the original poster? -
How to send/receive e-mails with sql or pl/sql
Hello,
I must send and receive e-mail (something like e-mail client) done with oracle database and oracle forms.
How can I receive e-mails with SQL? Is there any way?
I read threads about using utl_smtp but i could not send an e-mail. May be I need to use servers without password?
Best regards
P.S. I'm using Forms 10g R2 and database 9iHi,
try below code.
change mailhost ip to u r mail server ip.
CREATE or REPLACE PROCEDURE SimpleTextMessage IS
mailHOST VARCHAR2(64) := '192.168.0.21';
mailFROM VARCHAR2(64);
mailTO VARCHAR2(64);
mailCONN utl_smtp.connection;
mailDATE VARCHAR2(20);
vreply utl_smtp.reply;
vreplies utl_smtp.replies;
i number;
BEGIN
mailFROM := '[email protected]';
mailTO := '[email protected]';
SELECT TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS') INTO mailDATE FROM dual;
vreply := utl_smtp.open_connection(mailHOST, 25, mailCONN);
vreplies := utl_smtp.help(mailCONN, 'HELP');
for i in 1..vreplies.count loop
dbms_output.put_line( 'text = ' || vreplies(i).text );
end loop;
vreplies := utl_smtp.ehlo(mailCONN, mailHOST);
for i in 1..vreplies.count loop
dbms_output.put_line( 'text = ' || vreplies(i).text );
end loop;
vreply := utl_smtp.mail(mailCONN, mailFROM);
vreply := utl_smtp.rcpt(mailCONN, mailTO);
vreply := utl_smtp.open_data(mailCONN);
utl_smtp.write_data(mailCONN, 'Subject: '|| 'Hi' || chr(13));
utl_smtp.write_data(mailCONN, 'From: '||mailFROM || chr(13));
utl_smtp.write_data(mailCONN, 'Date: '||mailDATE || chr(13));
utl_smtp.write_data(mailCONN, 'To: '||mailTO || chr(13));
utl_smtp.write_data(mailCONN, 'CC: '||mailFROM || chr(13));
utl_smtp.write_data(mailCONN, chr(13));
utl_smtp.write_data(mailCONN, 'Hello Friend how r u.' || chr(13));
vreply := utl_smtp.close_data(mailCONN);
END;
/
Maybe you are looking for
-
Ipod will sync on windows vista but not xp
Hi, my ipod classic will sync to a pc running windows vista but wont sync to a pc running windows xp, has anyone got any ideas as to why this would be or how it can be overcome please.
-
How do i get my contacts back after they've been deleted form iCloud
How do I get my contacts back after they have been deleted on my phone from iCloud?
-
ITunes does not synchronize iPod music
Hello. I have an iPod touch 8 GB Version 3.1.3 In my iTunes I do not want to sync new songs I add to the library. I deleted the iTunes on your computer from anywhere possible and then reinstall it but still it does not synchronize my new songs I add
-
I cant find my ipod can you track it for me
i cant find my ipod can you track it to find it and tell me
-
Setup not completed on brand new Satellite L510
Started with brand new L510, I dont think setup completed properly, didn't have start up guide so didn't realize was going to take so long, Turned off , so now every time we restart keep getting "setup is preparing your computer for first use" and th