Mail Adapter Scenario ----- Need help
Hi All
Again with same mail adapter scenarios .
I am trying to send my e-mail on Microsoft Exchange server to a FTP server .
So flow is like Mail system->XI-> File system.
While configuring sender mail adapter , i gave the following URL imap://S4DE8PSAANH.ibm.com/InBox as i am using IMAp4 as the protocol.
Now i have set of doubts and questions for which i need input from you all
a>I am still seeing my sender communication channel with green light (running ), its not picking up any new mail i came to my inbox. Any reasons why it did not pick up ?
b> Now to set up Receiver Determination and Interface Determination , i need to have inbound interface created, but here when my requirenent is just to send a e-mail content as XML to fle system , what interface should i use or how should i create a interface with interface mapping or message mapping ?
c>Any idea whether just configuring a sender mail adapter with certain poll interval will result in a XML message that can be seen in SXMB_MONI txn ? Or do i need to fullly set up my receiver system and complete whole configuration of the entire flow.
My intent is just to get a simple mail body into XI , how do i achieve it ?
I gave URL as imap://S4DE8PSAANH.ibm.com/InBox , still i did not get any XML message in SXMB_MONI txn ..or should i give IP address of my exchange server instead of S4DE8PSAANH.ibm.com ? ...
Can we see a XML message if only a sender communication channel is set up with no receiver ? .. I am just wondering why new mail in my inbox is not getting picked up into XI.
Thanks a lot to all who helped to me earlier , i guess i rewarded points to all those who guided me : -) and will do same again as promised.
Please help .
Thanks and Regards
rohan
Hi Rohan -
Here's what I can tell you:
- if the hostname is wrong, you'll get a 'UnknownHostException'.
- if the path (e.g. Inbox) is wrong or doesn't exist, you'll get a 'IOException... The requested item could not be found'.
- if you don't configure user authentication, you'll get a 'NullPointerException'.
This is all within Adapter Monitor - so since your mail CC status is green, we can only assume that your mail host is valid, your path is valid, and your user id/pwd is valid.
One thing to try, since 'Inbox' is common to any mailbox, try creating a new folder at the Inbox level (e.g. called 'Test1') and specify the URL as:
imap://S4DE8PSAANH.ibm.com/Test1
and see if your CC status is still green in the Adapter Monitor (make sure to look at the ID Cache Notifications and the timestamp in the adapter monitor).
Outside of this, SP9 is relatively old. You should patch your XI system as soon as you get a chance - with or without this problem.
Regards,
Jin
Similar Messages
-
Help Required on File to Mail Adapter scenario
Hi all,
Can someone give me some links or material regarding the step by step procedure to configure a file to mail adapter scenario (including the design and configuration). I have already gone through help.sap.com, but I need more clarification. So please guide me accordingly
Regards
V.KartikHi Karthik,
Also check these links on File to Mail adapter scenario:
Blogs:
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/sap.user72/blog/2005/06/08/sending-attachments-in-mails
Sap File on Mail Adapter:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Also check these similar threads:
How to implement file to mail scenario
What is the process for sending file thru email using Mail Adapter ???
Regards,
Subhasha Ranjan -
Hi
I require some input on including a mail adapter to an existing scenario
The scenarios is as follows,
I have to create some files around 20 and place them in two folders , that build has been done and tested , so I have a multi mapping , for those 20 files , and enhanced interface determination and is working fine
Now a new requirement is to send an email ,
kindly tell me the steps in IR and ID to include the mail adapter in this interface ??
considering it as an additional feature, nthing to do with Files ,,,
which means that an email adapter has to be called with the file adapters ( not before not after....the precedence doesnt matter )
its just that along with creating the files an email has to be sent ... thats all
I want to know what am i required to create :
in IR : is there a separate interface required .. smthing to do in mapping also ? i am presuming not since it is inbound
in ID : can i create a dummy busines service and what all do i need to create ???
please help
thanks
DevHi,
You create a message type for mail adapter and an message interface. You can also use the predefined message type from sap. So now in multimapping you add this message type and map from your source to this mail mapping. Add the same message interface in interface mapping.
Create a mail receiver communicaiton channel with your mailbox parameters. Then add this to your receiver determination. Also you need to create a receiver agreement for this one.
You can see some help here:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
You can do a search for more blogs and tutorials on mail adapter.
Regards,
---Satish -
XI Realtime scenarios-need help
Hello experts,
I am new to XI and I need help with real time XI scenarios.
can you please give me 2-3 examples of What kinds of systems involve in data transfer (both sap and non sap) for transfer of what kinds of data (general IDOCs, RFCs and other kinds of data)
and what is the purpose of that scenario? also how many times the data will be transferred between the systems?
Thanks in advance,
Haritha.
useful answers will be rewarded ***Hi Haritha,
Hi,
Please go through the following are the links.
Maybe this is a good start:
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm>
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
<https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]>
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm>
Further, this thread deals with everything that is needed for a starter
on XI. Do check them out,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
/message/527697#527697 [original link is broken]
</message/527697#527697 [original link is broken]>
And after you are done with the documentation probably you can go
through this scenario,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
Also check the following threads which might help you a little more,
Learning XI
<Learning XI>
XI 3.0 Training
<XI 3.0 Training>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
<https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db>
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
</people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i>
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
</people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii>
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
</people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii>
and once you are through ...follow the following links to weblogs which
explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic
scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
</people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters> - IDoc to
File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
</people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy> - ABAP
Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
</people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30> - File to
JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
</people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy> - File to
ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
</people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1> - File to
File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
</people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2> - File to
File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
</people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping> - Any flat
file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
</people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit> - File to
RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - File to
Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
</people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i> - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
</people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii> - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
</people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address> - Dynamic
Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
</people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi> - Message
Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
</people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm> - Walk
through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
</people/siva.maranani/blog/2005/05/22/schedule-your-bpm> - Schedule
BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
</people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi> - Use of
Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - Use of
Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally
</people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally> - Maintain
RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u
</people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u> -
Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
</people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party> - Handling
different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
</people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi> - Modeling Integration
Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
</people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible> - Testing
of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects
</people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects> -
Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm>
- Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step> - Alert
Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide> - Trouble
shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
</people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi> - Call
UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
</people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi> -
Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
</people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping> - Using
ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
</people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure> - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
</people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm> -
Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces
</people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces> -
Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
</people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14> - The same
filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
</people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine> - Payload
Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
</people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i> - XI :
Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
</people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter> - XI: HTML
e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated
</people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated> - XI :
FAQ's Provided by SAP
Books from SAP PRESS...add this link to your favourites...
http://www.sap-press.de/international?GalileoSession=97477303A3.xx-M0Y78
Real World Scenarios of SAP XI ...VERY VERY GOOD....AWESOME
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/0
b95b488-0701-0010-57b9-e861b1ad572f
Check this up:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken] (how to guides)
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm (very nice XI help)
Here is some scenarios from SDN:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to il
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by
SAP
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6051-Performance [original link is broken] [original link is broken] [original link is broken] [original link is broken] Tuning for PI
Please give reward points if it is useful.
Regards,
Sai. -
File to mail adapter scenario.
Hi All,
i have a file to mail adapter scenario.
here i get the data from tthe different vendors and what ever comes in should be validated and if needed sent as an attachment or detached from the message and then from receiver mail adpter to application server..if possible content conversion has to be done.
my questions are...
<b>1.whare should we validate the data..is it in the XI server or receiver mail adapter..
if so..how to do that validation
2.how can we send as attachments ..
3.how can we detach them..i.e if attachments are not required 4.if content conversion conversion has to be done where is that done..
4.after coming out of the receiver adapter....how can we send it to the appliocation server.</b>
Thanks in advance..
cheers,
raghavesh
Message was edited by:
Raghavesh Reddy
Message was edited by:
Raghavesh ReddyRaghavesh,
Not sure if i follow the entire question.
><i>here i get the data from tthe different vendors and what ever comes in should be validated</i>
I guess you are getting files using the file adapter.
><i>and if needed sent as an attachment or detached from the message and then from receiver mail adpter to application server..if possible content conversion has to be done.</i>
Not sure I follow this part. You validate your incoming file and what do you do
1. If the file is valid?
2. If the file is invalid?
are you sending mails in both cases.
Like pinted out there are multiple places where validations can be done,
1. Module --> https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
2. Mapping --> Graphical / Java
There are many options and they all depend on the incomuing payload and the entire process.
So , if you can give us more details, maybe an optimum solution can be discusses.
Regards
Bhavesh -
Question in mail adapter. Please help!
Hi experts,
What is use of Message_ID and X_Mailer in mail adapter?
Please help
Thanks
GopalHi,
Please refer to this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/260b308075400ee10000000a11466f/frameset.htm
Regards,
Sudheer. -
I am working on a scenario where XI will send the xml to the receiver via e-mail. I am not getting any e-mail from the XI system. Can I specify gmail or yahoo account ids along with the property settings?
Do I have to do anything on the SCOT transaction?
Regards,
N.SMoorthy,
I wanted to let you know that am working on a RFCBPM-XI-Mail adapter scenario. This scenario worked on a regular file adatper scenario. Now I am just changing the sender communication channel to selec the mail adatper.
I am getting the following error in the mail adapter:
<b>'error occured: [2006-09-27T00:21:04Z] unable to call the mailer; com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.0 Must issue a STARTTLS command first 40sm120265wrl"</b>
Here are the parameters:
Transport protocol : SMTP
Message Protocol : XIPAYLOAD
Adapter Engind : Integration Server
url:smtp://gmail.com (also tried the IP address of this server)
Authentication mode: plain
user: [email protected]
password : no password
Mail attributes:
From : [email protected]
To : [email protected]
subject : sample e-mail
Content Encoding: base64
Please let me know where the error is;
N.S -
File to Mail Scenario - Need help
Hi all,
I am trying a simple file to mail scenario in which i am using following data types .
Source datatype -
Scr_File_DT
-- Root
Material_no
Plant
Target datatype -
Tgt_Mail_DT
--Content
In the message mapping i am concatenating material_no and plant and mapping it to content.
The receiver mail adapter parameters are as follows -
Transport protocol - SMTP
Message Protocol - XIPAYLOAD
URL: smtp://gmail.com
Configure User Authentication: X (Check box is selected)
Authentication Method: Plain (from drop-down box)
User: [email protected]
Password: ****
from: mail address
to: mail address
subject : test mail.
Just wanted to confirm whether these settings are correct or not? Because i am not getting the mail in my mailbox.
Can anyone please help me on this.
Also are there any other settings required for using mail adapter ?
Thanks.Hi,
you should add your email address to your user,add specific users list add you r user in alrtcatdef.
generally you should maitain the email data type format like
subject,from,to,content-type..
se below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Regards
Chilla.. -
E-Mail reporting in file to mail adapter scenario
Experts,
I am working on a file to mail adapter in which, have to just send a mail to the recipient by putting a subject line and mail body.
am following the following example
/people/community.user/blog/2006/09/07/email-reporting
but my requirement is not to send the mail attachment. I just need to send a mail body stating the error location.
here at teh receiver side, have downloaded a mail.xsd. in this "subject line","from field" , "to" field is there but there is no "mail body" field .
Can any one please help me out. I just require to send a mail body to the recipient.
Thanks
VeeruExpert,
I have used but still am getting teh attachment not as a mail body.
Isit possible to send the mail body via XSLT mapping , for eg
<?xml version='1.0'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://perks.com/MailTest">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:template match="/">
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>Error files from XI</Subject>
<From>from mail ID</From>
<To>to mail id</To>
<Content_Type>text/html</Content_Type>
<Content>
<xsl:text xsl:space="preserve">The error files for which service entry has not been created:</xsl:text>
<xsl:value-of select="$break"/>
<xsl:value-of select="$break"/>
<xsl:value-of select="$tableB"/>
<xsl:value-of select="$thB"/>
<xsl:value-of select="$tdB"/>
<xsl:text xsl:
</Content>
</ns1:Mail>
</xsl:template>
</xsl:stylesheet>
Any suggestions?
Thanks
Veeru -
Configurations required for sender/ reciever mail adapter scenario...
Hi,
I have to work on few mail scenario's i.e, sender and reciever.
Please let me know what all configurations are required in XI server to make the system ready to send and recieve mail like SMTP configurations...
Thanks..Hi,
how to use mail adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
XI: Dynamic name in the mail attachment - pseudo "variable substitution"
The specified item was not found.
XI: Sender mail adapter - PayloadSwapBean - Step by step
The specified item was not found.
XI: HTML e-mails from the receiver mail adapter ?
The specified item was not found.
Mail Adapter (XI) - how to implement dynamic mail address
The specified item was not found.
S/MIME Security for the MAIL-Adapter within XI
S/MIME Security for the MAIL-Adapter within XI
Configuring sender mail adapter
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
Thanks,
Madhu
Edited by: Madhu sudhan Reddy on Jul 18, 2008 7:54 AM -
Multiple Source Messages Scenario - Need help
Hi,
This is my scenario.
System A sends Message A
System B sends message B
both of them are diffrent strcutures.
Now I need to map both of the messages to Message C and send it to system C.
I would need help on how to achive this requirement.
I tried using correlation in BPM but i dont know if I'm following the right approach to activate correlation.
Any help in this regard would be appreciated.
Cheers!!
SidharthHi,
I've gone through the thread but did not find much information.
The blog talks about collecting messages for same interface which I'm afraid is not wht I'm looking for.
Just to summarize wht I've done....
Start --> Receive 1 (Message A) --> Receive 2 (Message B) --> Transformation --> Send 1 (Message C) --> Stop
I've defined correlation accordingly... to pick up the PO num field.
Now when message A is submitted the outbound status on sxmb_moni is set to waiting....
But the moment I submit message B, The outbound status is set to a Green Flag and there is a SYSFAIL entry in the queue.
The error is " Permanent Error in BPE Inbound Processing"
But I see the message A is has still got the outbound status wating..
I guess I'm missing something in correlation..
cheers!!
Sidharth -
Mail adapter - SCOT needed ?
Hi guys,
I've done the proper configuration of an ABAP application system's target SMTP server (in SCOT), however I am curious is it a must for using successfully the Mail adapter..?
Thanks & Best Regards,
Lalo> I've done the proper configuration of an ABAP application system's target SMTP server (in SCOT), however I am curious is it a must for using successfully the Mail adapter..?
The Mail Adapter of PI does not use SCOT. So you need not maintain SCOT. -
Sales Quotation Scenario - need help
Hi,
I need help in fulfilling my client requirement.
Once quotation is created it should be in the blocked stage.
Once the sales manager changes the quantity it should not allowed to change the quantity and only Marketing director can change the quantity.
After Marketing director changes and finalizes the quantity in the quotation the item lines in the quotation either need to be greyed out or should not be editable but should allow to add items in the same quotation.
Now Sales order should be able to be created referring this quotation.
Please let me how can we achieve this functionality either by standard SAP or by ABAP development.
Thanks
Venkata Rama ReddyOnce quotation is created it should be in the blocked stage.
Once the sales manager changes the quantity it should not allowed to change the quantity and only Marketing director can change the quantity.
- To disable the qtty in Quotation Creation-VA21 ( either use the SHDB-Transaction Variant, Make the order qtty- display mode/ maintian this order qtty )
+NOTE: incompletion procedure-line item level- remove "order qtty" for quotaiton or else system will not allow to save the Quotation ( or else you save the Incomplete document)
- Use BS02- Status profile- maintian sales manager / Marketing director - as status No.
- Business transaction in the status profile _ maintain the object " Create Order" - objectionable against the status no. & last colum is Authorization code- assign respective profile here & maintain the same in respective Username- for authorizations.
After Marketing director changes and finalizes the quantity in the quotation the item lines in the quotation either need to be greyed out or should not be editable but should allow to add items in the same quotation.
Now Sales order should be able to be created referring this quotation.
HOpe it helps -
Need to send a mail back to the user in Sender Mail adapter Scenario
Hi all,
I have a scenario where the user fills the Price form or the Article form (which is a Adobe Form).When the user clicks on the "submit" button,the form is converted into xml , gets attached to the mail and sent to PI.
Now the user sometimes attaches the pdf directly instead of submitting the form. This results in the mail being sent
with pdf as attachment.
Now my requirement is to send a mail back to the user asking them to send an xml instead of a pdf.
How can this be done ?
Kindly let me know friends.
Quick Response is appreciated.hi Sanjay,
Have a look on Michal's blog, it's for JMS, but it works for others: [PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean|PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean]
Mickael -
I have Skype on my Windows 8.1 laptop and on my Android tablet
When I use the tablet for skype everything works great - except I am unable to create group calls which is absolutely eseential for my work.
Therefore when I need to do group calls, I either get someone else to create the group or I try to use skype on the laptop.
However this is when the problems start.
Two common people I talk with are CJ and NT.
CJ uses Skype on a Mac Laptop.
NT uses skype on a Windows 8.1 laptop.
* If I have a call with CJ on the tablet, everything works 100% fine
* If I have a call with NT on the tablet, everything works 100% fine
* If I have a call with CJ on the laptop, his sounds randomly cuts out (usually in 3-5 seconds blocks, maybe every 5-10 minutes)
* If I have a call with NT on the latop, everything works 100% fine
So...
* I thought the problem was with my audio output - but I never have the problem with NT?
* I thought the problem was with CJs microphone - but I never have a problem when I talk with him on the tablet?
I've tried...
* Ehanced audio / non-enhanced audio
* Re-install drivers
* Headset / no headset
It's really frustrating! Now my tablet is basically stuck as my skype phone however this means I cant do group calls which I really need.
Please, anyone, help me solve this dilemna!
I use skype every day.I've delved further into this testing am starting to see a trend...
Other contacts of mine CC and HK are boths Mac users and they have similar problems to CJ mentioned above when on the laptop but never on the tablet.
Meanwhile another contact AT is a windows user and they never have problems on both the tablet and the laptop.
Therefore, the trend so far is that if I talk to a Mac User on my Windows 8.1 laptop I have audio problems, meanwhile every other scenario works fine!!
P.S. These are regular contacts of mine which I NEVER had any problem on my Windows 7 laptop... wish I still had that laptop to re-test but I gave it away...
Maybe you are looking for
-
Image item to open a page in a new pop window
Hi, How can I have an image to open a page in a popup window. As I can define an item as a link and define Destination URI and Target Frame as _blank. But I need to show an image that when clicked should open the Destionation URI in a popup blank pag
-
How to edit a text message received in Outlook 2013?
I have a user who has configured his phone to automatically forward text messages to his Exchange account. When he opens the message in Outlook 2013 he'd like to be able to edit the message like he was accustomed to do in Outlook 2003. For a normal
-
Can We Have 2 Oracle Versions 9 and 10g Sharing Same Linux RH2 Server?
Hello DBA's Am quite undecided in setup 2 Oracle Versions into Same Machine. The Reason is Am'm affraid if I need t install specifique RPM packages fro 9R2 are thy compatible with The RPM request for 10gr2. Second Question What's your opinion concern
-
Maintain number range object for object J_1IRG23A1, year 2007, excise
Hi All, I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and Maintain number range object for object J_1IRG23A2, year 2007, excise group 10 but i have already
-
HT1349 Will apple care replace my water damaged iPhone 4s
I have a iPhone 4s with slight water damage and I would like to know if apple care will replace it for the $49.99 deductible. I do have AppleCare