Mail/Alert setup at PROD server

Hi,
My current OBIEE runs on HP-UX, I wanted to set-up mail/alert facilities on OBIEE, like we use iBots/Deliver for single user application.
What all things I need to take care to set-up email/alart facilities at PROD?
Any help is well appreciated.
Regards
Jan

Hi, Thanks for your mail,
How do I load the BI env variables? Where do I get those? I am very new to PROD installation part.
I have the Production OBIEE installation CD which I have got from Oracle, At present we are not using Delivers at all. Is Oracle Deliver free licensed software which comes along with OBIEE CD from Oracle?It will be great if you could let me know step wise what need to be taken care to have facilities for email/alert.
Regards
Jan

Similar Messages

Script to send a mail alert whenever server boot

hi,
I need a shell or perl script to send a mail alert to user whenever server boot, restart and shutdown.because in my office power problem is there.So the server restarted intermediatly.Kindly any one give a script to rectify my problem.

If the server isat all important and you have a power problem, do consider getting a UPS. It might recover OK most times from power cuts (especially if you're on ZFS), but if you get other power problems like brown-outs and spikes, you might one day regret leaving it connected to a bad mains feed. Choose a mainstream brand like APC to be sure of Solaris support. The line-interactive versions, e.g. SmartUPS will recondition the mains waveform as well as maintaining supply during a power cut.

TS1843 i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail

Mail setup to exchange server 2003

I can sent and receive mail using Entourage, however, Mac Mail will not connect to server on the incoming mail side. The password isn't recognised. The connection doctor reflects following:
.mac account green
exchange account red trying to log on, check username and password (incoming)
smtp.mac.com..... green
192.xxx.x.xxx green connection and login succeeded (outgoing)

I'm having the same problem with my Hotmail account (POP3).
I haven't solved it yet, but here are some useful links for possible solutions. It seems a lot of people are having this problem.
http://discussions.apple.com/thread.jspa?messageID=5583444
http://www.ipod-addicts.com/iphone/this-message-has-not-been-downloaded-from-the -server-2.html
There are loads of other webpages here:
http://www.google.com/search?client=safari&rls=en-gb&q=thismessage+was+not+downloaded+from+the+serveriphone&ie=UTF-8&oe=UTF-8
I'm going to submit it as a bug to Apple. Seems that a lot of people have solved it by using IMAP settings instead of POP though...
I don't know about others, but I've really started to notice just how many bugs there are with Apple software!

Not getting Page from Prod server

Hi All,
I have set two pager email Id in my prod server
I have a job when this job succeed then it will send a page to both email ID
Job ran successfully and both Email ID did not get any single page about this
when I checked in operator history in Most recent notification it shows that page has been sent on expected time.
Same I have try with Dev server it's working fine Only difference in Pro and Dev job is: In prod job taking 4 hour and in Dev job taking 5 min.

Yes Job history shows success (Operator Paged
SQLDBAONCALL)
Email profiles are also fine (I am getting mail for other job )
there is no log for in sql server as well as sql server agent error log
Dev and prod are using same mail ID
Hi ImranKazi,
According to your description, the operator does not receive an e-mail in Production environment. I recommend you configure database mail in Production environment, then send a test e-mail to the operator’s e-mail address. We need to verify if your profile
and account are configured correctly. For more information, see:
http://www.codeproject.com/Articles/29060/SQL-SERVER-Configure-Database-Mail-Send-Email
After setting up database mail successfully, if you want to set up an alert to an e-mail operator with a message, you need to define an operator and alert , restart SQL Agent to activate settings. When you execute the job successfully,
it will send an alert to the operator. I have done a test in SQL Server 2012, it can run well. There is an similar issue about
how to setup SQL Server alerts and email operator notifications, you can review it.
http://www.mssqltips.com/sqlservertip/1523/how-to-setup-sql-server-alerts-and-email-operator-notifications/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail The connection to the server failed. I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying.

I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail The connection to the server failed. I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying. Can someone please help me with this? -Stu

Hi StuNYC,
Welcome to Apple Support Communities.
It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that cause an alert like that to appear in when starting the Mail app.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
I hope this helps.
-Jason

Configuring mail alert for status of Concurrent manager and Apache services

Hi,
We have R12 (12.0.6)setup on our PROD EBIZ we want set mail-alert whenever concurrent manager or Apache services go down.
Can this be done through Oracle alert manager ....
Does anyone has a script thats works in oracle alert manager...
How do we configure the same in oracle alert manager.
Help is appreciated.
Regards,
Milan

Hi;
You can run cmclean.sql. For details see:
CMCLEAN
Also see:
How To Clear Orphan Generate Run Balance Processes [ID 337898.1]
Regard
Helios

Send mail alert

Hi All, does anyone know how to send mail alert from windows box when oracle is down ?
I have oracle 10.2.0.4 running on windows 2000 server and wanted to wrote a script in windows to detect if oracle is down, it will send mail alert to my mailbox.
Is there any command line interface to call the send mail function in windows ?
Pls advice how i can do this.
Thanks.

In order to send email within 10g you must install and set up the UTL_MAIL package.
UTL_MAIL isn't installed when the database is installed because the SMTP_OUT_SERVER parameter must be configured. Listing 1 shows how to install UTL_MAIL and the results from the script. You must connect to the database as user SYS and run the two scripts identified in the listing.
Listing 1. Installation of UTL_MAIL
SQL> connect sys/password as sysdba
Connected.
SQL> @$ORACLE_HOME/rdbms/admin/utlmail.sql
Package created.
Synonym created.
SQL> @$ORACLE_HOME /rdbms/admin/prvtmail.plb
Package body created.
No errors. Next, the SMTP_OUT_SERVER parameter must be configured. You must connect to SYS and then use the alter system command to configure SMTP_OUT_SERVER parameter as shown here:
SQL> alter system set smtp_out_server = '<ip-address:port' scope=Both;
System altered.That's it! The installation and setup for UTL_MAIL is complete. The UTL_MAIL package only has one procedure, called Send, for sending email (see Listing 2 for the syntax for the Send procedure). This package bundles the email message and sends it to the UTL_SMTP package, and then the email message is sent to the SMTP server.
Listing 2. Syntax for UTL_MAIL.SEND
UTL_MAIL.SEND( sender IN VARCHAR2,
                                 recipients IN VARCHAR2,
                                cc IN VARCHAR2 DEFAULT NULL,
                                bcc IN VARCHAR2 DEFAULT NULL,
                                subject IN VARCHAR2 DEFAULT NULL,
                                message IN VARCHAR2,
                                mime_type IN VARCHAR2 DEFAULT
                                'text/plain; charset=us-ascii',
                                priority IN PLS_INTEGER DEFAULT NULL);
Examples: I've created a database trigger that will send an email using UTL_MAIL (see Listing 3).
Listing 3. Database shutdown using UTL_MAIL
CREATE OR REPLACE TRIGGER SCOTT.db_shutdown
before shutdown on database
begin
utl_mail.send(
   sender => '[email protected]',
   recipients => ' [email protected]',
   subject => 'Testing utl_mail',
   message => 'The receipt of this email means'||
    ' that shutting down the database'||
    ' works for UTL_MAIL '
end;
/

LOM, ALOM, RSC, ILOM mail alerts

Hi,
I just want to get to the bottom of this. Anyone else who experiences problems with ALOM/RSC/ILOM/LOM email alerts please post here!
I have done an audit of all my systems and found the following:
T5220 with latest firmware:
Sun System Firmware 7.2.0 2008/12/11 17:58
Host flash versions:
Hypervisor 1.7.0 2008/12/11 13:38
OBP 4.30.0 2008/12/11 12:15
POST 4.30.0 2008/12/11 12:43
Mail alerts work fine here
T2000 with latest firmware:
Sun-Fire-T2000 System Firmware 6.7.0 2008/12/11 14:54
Host flash versions:
OBP 4.30.0 2008/12/11 12:15
Hypervisor 1.7.0 2008/12/11 13:43
POST 4.30.0 2008/12/11 12:41
Mail alerts do not work. Sun advises me to
change my Production mail server to allow
broken sender header "[email protected]".
This is not good enough.
V240 with ALOM 1.6.8:
Mail alerts work fine.
V490 with RSC 2.2.2:
sc> showsc
RSC Version: 2.2.2
RSC Bootmon version: 2.2.2
RSC Firmware version: 2.2.2
Email alerts work fine!!!!
V490 with RSC 2.2.3:
rsc> showsc
RSC Version: 2.2.3
RSC Bootmon version: 2.2.2
RSC Firmware version: 2.2.3
Email alerts do not work.
So we have a case where Sun RSC is broken from RSC 2.2.3 onwards.
We have a case where the ALOM on a V240 works perfectly but the T2000 is totally b0rked and
Sun is not interested in fixing it.
So can anyone concur with my findings? Do we sort of get together and request
en-masse to get these fixed?
It would seem the programming of the SC/ALOM/ILOM/RSC are all inconsistent.
Some of them are well behaved. Some are configured in such a way I would
fail anyone submitting such work as homework etc.
I honestly believe if a service such as an RSC is setup to send email,
it should do it in a method that ensures as little risk of non-delivery
as possible, such as being able to set a hostname/domain for the sender.
As is indicated above, it appears the precedent is set for the technology
to be able to do so, but there is an inconsistent approach to this in the
Sun shop where the RSC/LOM etc are developed.
So while we're at it, how about Sun standardising the RSC across
their product line so we only have to use and support one interface?!
rachel
Edited by: virag064 on Feb 1, 2009 3:32 PM

Problem
Email alerts from ILOM not working. Test box is a T5140.
Complication
ALOM systems using the same email server have no problem.
Analysis
ILOM changed the format of the email address.
Old [ALOM] = alom-alert@[alom_IP]
New [ILOM] = ilom-alert@ilom_IP
The one that works has [] surrounding the IP.
Note: the other problem was that under certain firmwares, the Send Test Alert function in the GUI was broken. As this is how I tested ILOM email functionality, I thought it was broken when only the send mechanism was broken.
Paul Quattrociocchi from Sun found this:
Document ID:     6633026
Title:     Unable to use e-mail alert notifications via ILOM due to
IP domain in address
For example, sendmail v8.9+ will not accept "domain literal" address
([ipaddress] is a domain literal). But it does accept "@1.2.3.4"
Just fine.
So some mailers accept @1.2.3.4, some accept @[1.2.3.4]. But it
doesn't look like we can be guaranteed that any one style will work.
CR 6410008 is the same as the ILOM issue. They fixed it by quoting
RFC 2821 and changing the address to "ilom-alert@[10.100.14.104]".
The mail server that was failing showed the following in its logs [Ive removed the SMTP server and client ILOM info]:
Feb 25 10:53:22 SMTP_server postfix/smtpd[29222]: [ID 197553 mail.info] connect from ILOM_card
Feb 25 10:53:22 SMTP_server postfix/smtpd[29222]: [ID 947731 mail.warning] warning: Illegal address syntax from ILOM_card in MAIL command: ilom-alert@IP_address
Feb 25 10:53:22 SMTP_server postfix/smtpd[29222]: [ID 197553 mail.info] disconnect from ILOM_card
Fix [this is specific to the T5x40 but there are likely releases for other platforms]
Document ID:     139444-01
Title:     Hardware PROM: SPARC Enterprise T5140 & T5240 Sun System
Firmware LDOMS
Sun System Firmware 7.2.0 2008/12/11 18:19
ILOM 3.0.2.50 Dec 11 18:19:11 PST 2008
VBSC 1.7.0 Dec 11 2008 17:20:47
Hypervisor 1.7.0 2008/12/11 13:40
OBP 4.30.0 2008/12/11 12:16
POST 4.30.0 2008/12/11 12:44
From the GUI you select update ILOM, but it updates everything.
This allows you to change the format of the return email address to something the SMTP server will accept.
The short-term fix
Change email servers to one that accepts the new format [no guarantee this will keep working].
If you set the sc_clieventlevel to 3 [minor] and do something, anything, that triggers an event [logging in to the GUI, logging out of the GUI, etc], you will cause email to be sent.

E-mail alerting CSM 4.1 and IPS 4240

Hello,
I have recently migrated from CSM 3.3 to CSM 4.1 on a new server. I have everything configured and working correctly, but the thing that I am missing is how to configure E-mail alerts based on attack severity. I had this configured on the old CSM 3.3 server, but it appears that this is not available under CSM 4.1??I have read through the documentation and compared my old configuration with the new and it is not obvious to me how to get this functionality back on 4.1.
CSM 4.1 that I have is the standard version, if that matters.
Any tips or assistance on this will be greatly appreciated!
Frank

Hello,
Unfortunately, CSM 4.x does not have the capability to send e-mail notifications for IPS alerts. An enhancement request has been filed for this feature, you can view the request here:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtn59300
The workaround would be to set up Cisco IPS Manager Express and use the e-mail notification feature within IME.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html
IME is available for download here:
http://tinyurl.com/3lmwj5w
Hope this helps.

Backup server setup info with Server Assistant

Hi,
I'm trying to backup my OS X Server (10.9.4) setup information using Server Assistant. On the 'Welcome' page in the Assistant, I selected "Save setup information in a file or directory record." The other choices are "Install software on a remote server" or "Setup a remote server." When I click Continue, the Assistant acts more like it's doing an initial installation as opposed to a backup of settings that are already in use. It asks for the OS X Sever serial number, and even for the administrator name, shortname, password, and to verify the password, just as though i'm setting up the server for the first time. I'm afraid to continue past the Administrator Account page since it seems like it might copy over my current setup.
OS X Server Help is useless here. It only states that you can backup the server settings, not how to do it.
Anybody ever do this before? Should I just proceed?
thanks
b
X Serve Mac OS X (10.4.9)

Hi
You can use Server Assistant but it can only save a configuration file to another server running directory services. You can save property lists for individual configured services by drag dropping the propery list to the desktop (small icon above the Settings Save button. Transfer them to a memory stick or something suitable. Server Admin can be configured later on with these property lists. Export Users and Groups, bear in mind passwords are not transferred across. You can transfer passwords using the appropriate command line tools, but this is not trivial. Most people find it easier to define a password policy for all users once they have been re-imported.
For many reasons I would not advise you to save the Open Directory property list.
If you are planning to change the server name and/or IP address then don’t start the services after drag dropping the transferred property lists, issue changeip first – consult the man page for proper usage. Restart the server twice and then start your services one by one starting with AFP, Windows and DHCP, test these with a test user in the local directory node. When you are ready move on to DNS, test this thoroughly before moving on to any DNS dependent services such as LDAP, Mail, Web, SUS etc.
Hope this helps

How to setup the SMTP server in Oracle apps?

Hi,
How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
Thanks,
Bijoy
Edited by: user12070886 on Feb 6, 2013 4:26 AM
Edited by: user12070886 on Feb 6, 2013 4:27 AM

How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? No, it is not mandatory. Also please note that the mails are sent out from concurrent manager mode. Not from the database node.
Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
>
It depends on the operating system you are using. If you are using *nix then sendmail needs to be configured.
Thanks

E-Mail Alerts, Change SMTP Port

I'm trying to set up e-mail alert notifications in Enterprise Manager. I have port 25 heavily used elsewhere, and I beleive this is preventing connection. I cannot conect to port 25 with the telnet test, but I can cannot to port 23. How do I change ports?
Oracle Database 10.2.0.4

The front end application (SmarTeam PDM) is using port 25 for it's workflow. I havn't tested yet with that service off. I'm just wondering why that server can connect to to SMTP, but the Oracle server cannot?HELP!
I am easily confused.
Please clarify how many different systems are involved in this discussion, by providing actual hostname & description of their function.
Firewall rules can be such that System A is allowed to initiate a connection with System B using port #25
This same firewall could be configured to prevent System B from initiating a connection on port #25 with System A.
Please clarify the originating system, the terminating system & the port being used/attempted.
I still suspect internal Firewall rules are getting in your way

E-mail Alerts have stopped

Something has happened on our server and we are no longer receiving e-mail alerts of any kind. Can someone point me in a direction so I can let the IT consultant fix the issue? Thank You

Hi Jim,
Start with checking the services to see if tyhe SBO mailer is running. If yes check the definition of the alerts so that they are still defined to send email. ALso chech the outbox in B1 to see if there are mails not sent.
Further, check with your IT guys that the name or IP of the SMTP server has not changed.
I hope it helps,
Jesper

E-mail alerts in planning & essbase log

Hi All,
1).How to get the e-mail alerts in planning .
2).where can we find in detail log file in Essbase.
Bunny

Hi,
To set up e-mail for workflow notification.
In planning - Administration > Application Settings
Under System Settings in the E-mail Server box - enter the smtp server information.
essbase.log will be in arborpath directory e.g. C:\hyperion\AnalyticServices\essbase.log
Also there is a log file for each application. e.g. C:\hyperion\AnalyticServices\app\Sample\Sample.log
Cheers
John
http://john-goodwin.blogspot.com/

Mail/Alert setup at PROD server

Similar Messages

Maybe you are looking for