Mail and AOL cant send from 1 of 3 accounts

I have 3 AOL screen names and have been using them with OSX mail for years. Now, one of the accounts refuses to send email.
I get:
"cannot send email using the server smpt.aol.com"
My other 2 account use the same server and no problem.
I completely trashed my old OSX mail and reinstalled...even dumped the preferences so it started from scratch and still the same problem. If I run the AOL application I can send all day but I really want to use OSX mail.
Any ideas on how to fix this?
Thanks, Michael

Hi PrintGuy!
After you started from scratch, did you reconfigure the settings in Apple Mail for AOL?
This is a handy utility AOL Services Assistant, that does it automatically.
ali b

Similar Messages

  • I write a new email from my personal gmail account and it automatically sends from my family gmail account.  I  make sure that it lists my personal email on the from line. it still shows up that its from my family email. Help!

    I write a new email message from my personal gmail account and it automatically sends from my family gmail account.  I  make sure that it lists my personal email on the from line. It still shows up that its from my family email. Help!

    Hello, gypsyro. 
    Thank you for visiting Apple Support Communities.
    I would check to make sure the default account in Settings > Mail, Contacts, Calendars is set to your personal Gmail account.  Test send another message after making the change.
    Mail Settings
    Cheers,
    Jason H.

  • Conflict between MAIL and AOL - cannot send! same port?

    I just spent an hour on the phone with a very nice Apple tech and it turns out that the reason I cannot send mail (I can, intermittently) on my Mac mail application is that it conflicts (he believes) with aol, i.e. perhaps they are sharing the same port.
    The error message says mail cannot be delivered on Port 25 - but when I sign out of aol, mail works!
    Is there a way to adjust the port aol uses, or make some other change with aol so I can have both app's open at the same time?

    I don't use the aol browser, but I do like to sign on directly
    to check my "other" (i.e. aol) email, use the address book, etc.
    Apple provides what is called the AOL Service Assistant which will transfer (from the AOL program) your AOL email account or accounts to the Mail application, AOL address book contacts to the Address Book application and I believe it will also transfer AOL bookmarks to Safari so you can dump using what is a VERY old program for OS X which I doubt AOL will provide another update for.
    I have no idea if it is possible to change the port used by the AOL program and I'm not even sure if the AOL program uses an SMTP server for sending messages with an AOL account.

  • I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

    I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account.  Help.

    I HAD two accounts because of this problem.  I completely removed the problem account from the Apple Mail client.  Guess what is happening??  That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening.  This is incredibly frustrating.  When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system.  COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

  • Mail 4.1 incorrect "sending from" settings, won't send SMTP mail

    I've noted quite a few others reporting 10.6.1 SMTP mail problems, but I haven't seen my specific issue noted elsewhere.
    I've been able to send using my IMAP AOL address via Mail and longtime SMTP settings until today. Now, Mail apparently is scrambling outgoing email addresses and mismatching them with the outgoing SMTP settings. For instance:
    Using AOL address example [email protected] (showing correctly in the "From" window), the email will not send. The "cannot sent message using the server 'LG'..." dialogue comes up with the options to edit the SMTP server list or use the Connection Doctor. (All Connection Doctor reports coming back green, so the trouble's not there.)
    Looking a little closer at the dialogue box, though, it says Mail thinks the outgoing message is being sent from an entirely separate email address. In a couple of tests, the incorrect "sending from" address changes - one time it was a different AOL account, the next was an entirely separate .edu account. Wish I could attach a screenshot, but the bottomline is: I can see the "From" field showing the [email protected] address, but the error message about reconciling the outgoing server settings shows "Sending from: My Name <[email protected]>"
    Whatever the issue is, it is apparently not affecting (so far) my IMAP personal domain or IMAP gmail accounts - they're both sending and receiving normally.
    So Mail apparently is trying to send AOL account mail, but it's not finding the correct SMTP connection because somewhere along the way it's shifted the "sending from" to a different account.
    Any thoughts?

    I've been using Mail app with AOL accounts and the current settings for years with no trouble. This is new.
    I still think it's a Mail app issue - it's clearly showing in the error message a different "Sending from" account from the one that's actually selected and showing in the "From" window of the email message. It's as though Mail is trying to apply the existing SMTP settings for an erroneous account to the outgoing message. It's either trying to send [email protected] mail with YY.aol.com SMTP settings or vice versa.
    I'd be open to re-creating the AOL IMPAP accounts if I could avoid losing years worth of sent and received messages. I have everything backed up with Time Machine, but I've had very erratic email recovery issues with it since Snow Leopard too.

  • Script spol to mail , and report which sends output to spools

    Hi All,
    Please give me
    script spol to mail , and report which sends output to spool.
    thaks,
    babu

    Hi,
    Check the below code:
    scripts through email:
    *& Report  ZRICHA_OTF_PDF
    report  zricha_otf_pdf
        message-id zz.
    CONSTANTS                                                           *
    constants : c_x(1)      type c value 'X',      " For constant value
                c_otf(3)    type c value 'OTF',    " For format
                c_u(1)      type c value 'U'.      " Mail Option
    VARIABLES                                                           *
    data : v_rqident  type tsp01-rqident,  " For Spool Number
           v_rqclient type tsp01-rqclient, " For Client
           v_rqo1name type tsp01-rqo1name, " For Object name
           v_spool    type tsp01-rqident,  " For Spool Number
           v_spool1   type tsp01-rqident.  " For Spool Number
    FLAGS                                                               *
    data : f_spool type c.
      INTERNAL TABLES                                                    *
    Internal table for sending mails
    data: it_pdf          like tline      occurs 10 with header line,
          it_xi_pdf       like tline      occurs 0  with header line,
          it_html         like solisti1   occurs 0  with header line,
          it_xi_temp      like bapiqcmime occurs 0  with header line,
          it_xi_mime(255) type c          occurs 0  with header line.
    For sending mail
    data: it_objpack like sopcklsti1 occurs 2 with header line.
    Internal table for Single List with Column Length 255
    data : it_objbin like solisti1 occurs 10 with header line.
    Internal table for Single List with Column Length 255
    data : it_objtxt like solisti1 occurs 10 with header line.
    Internal table for Structure of the API Recipient List
    data : it_reclist like somlreci1 occurs 5 with header line.
    Structure of the API Recipient List
    data: x_doc_chng like sodocchgi1.
    Internal table for storing the variants
    data : begin of it_variant1 occurs 0,
            variant like varid-variant,
           end   of it_variant1.
    Internal table to store variants for the programs
    data: it_variant2 like it_variant1 occurs 0 with header line.
    Internal table for storing the selected values
    data it_return type ddshretval occurs 0 with header line.
    Internal table for storing the mail-ids
    data : begin of it_mailid occurs 0,
            kokrs like csks-kokrs,
            kostl like csks-kostl,
            datbi like csks-datbi,
            telx1 like csks-telx1,
           end   of it_mailid.
    Internal table for storing the mail-ids
    data : it_mailid1 like it_mailid occurs 0 with header line.
      SELECTION SCREEN                                                   *
    data : v_char type char50.
    selection-screen begin of block b1 with frame title text-001.
    select-options: s_email for v_char  no intervals
                    lower case
                    no-display.
    select-options: s_email1 for v_char  no intervals
                    lower case
                    no-display.
    selection-screen end of block b1.
    selection-screen begin of block a1 with frame title text-028.
    selection-screen begin of line.
    parameters : p_c1 as checkbox.
    selection-screen comment 3(66) text-026 for field p_c1.
    selection-screen end of line.
    parameters : p_set like tsp1d-papart matchcode object zh_tsp1d.
    selection-screen skip 1.
    parameters : p_vara1 type rs38m-selset.
    selection-screen end of block a1.
    selection-screen begin of block a2 with frame title text-029.
    selection-screen begin of line.
    parameters : p_c2 as checkbox.
    selection-screen comment 3(56) text-027 for field p_c1.
    selection-screen end of line.
    parameters : p_set1 like tsp1d-papart matchcode object zh_tsp1d.
    selection-screen skip 1.
    parameters : p_vara2 type rs38m-selset.
    selection-screen end of block a2.
    AT SELECTION SCREEN ON VALUE REQUEST
    at selection-screen on value-request for p_vara1.
    For fetching the variants available for the program
      perform fetch_variants.
    at selection-screen on value-request for p_vara2.
    For fetching the variants available for the program
      perform fetch_variants1.
    AT SELECTION SCREEN
    at selection-screen.
    For Validation
      perform validation.
    START OF SELECTION                                                  *
    start-of-selection.
    To get the output data and mail
      perform fetch_data.
    END OF SELECTION                                                    *
    end-of-selection.
      if f_spool = c_x.
        message e000 with 'Spool Not Generated'(060).
      endif.
    *&      Form  fetch_data
          To get the output data and mail
    form fetch_data .
    To send the output to spool
      perform generate_spool.
    endform.                    " fetch_data
    *&      Form  generate_spool
          To send the output to spool
    form generate_spool .
      data: l_params like pri_params,
            l_days(1)  type n value 2,
            l_count(3) type n value 1,
            l_valid    type c,
            l_valid1   type c,
            l_params1  like pri_params.
      data: l_device type usr01-spld.
    *Get the printer name for the user
      select single spld into l_device from usr01 where bname = sy-uname.
      if l_device is initial.
        l_device = 'LOCL'.
      endif.
    For report-1
      if p_c1 = 'X'.
    Setting the print parameters
        call function 'GET_PRINT_PARAMETERS'
          exporting
            destination    = l_device
            copies         = l_count
            list_name      = sy-uname
            list_text      = 'SUBMIT ... TO SAP-SPOOL'(008)
            release        = c_x
            new_list_id    = c_x
            expiration     = l_days
           LINE_SIZE      = 255
           LINE_COUNT     = 65
            layout         = p_set
            sap_cover_page = space
            cover_page     = space
            receiver       = 'SAP*'(010)
            department     = 'System'(011)
            no_dialog      = c_x
          importing
            out_parameters = l_params
            valid          = l_valid.
        if l_valid <> space.
          clear v_spool.
    Fetch the spool number b4 submit
          perform fetch_recent_spool using v_spool.
    Submitting the program to spool
          submit rkaep000 to sap-spool
            using selection-set p_vara1
            spool parameters l_params
            without spool dynpro
            and return.
          clear v_spool1.
    Fetch the spool number after submit
          perform fetch_recent_spool using v_spool1.
          if v_spool = v_spool1.
            f_spool = c_x.
            if p_c2 is initial.
              stop.
            endif.
          else.
    Checking the format ( ABAP/OTF)
            perform format_check tables s_email.
          endif.
        else.
          message e000 with 'Problem in print settings'(003).
          stop.
        endif.
      endif.
    For Report-2
      if p_c2 = 'X'.
    Setting the print parameters
        call function 'GET_PRINT_PARAMETERS'
          exporting
            destination    = l_device
            copies         = l_count
            list_name      = sy-uname
            list_text      = 'SUBMIT ... TO SAP-SPOOL'(008)
            release        = c_x
            new_list_id    = c_x
            expiration     = l_days
           LINE_SIZE      = 200
           LINE_COUNT     = 65
            layout         = p_set1
            sap_cover_page = space
            cover_page     = space
            receiver       = 'SAP*'(010)
            department     = 'System'(011)
            no_dialog      = c_x
          importing
            out_parameters = l_params1
            valid          = l_valid1.
        if l_valid1 <> space.
          clear v_spool.
    Fetch the spool number b4 submit
          perform fetch_recent_spool using v_spool.
    Submitting the program to spool
          submit gp3diehxy88snfj0391v7kf9ek7050 to sap-spool
            using selection-set p_vara2
            spool parameters l_params1
            without spool dynpro
            and return.
          clear v_spool1.
    Fetch the spool number after submit
          perform fetch_recent_spool using v_spool1.
          if v_spool = v_spool1.
            message e000 with 'Spool Not Generated'(060).
            stop.
          endif.
    Checking the format ( ABAP/OTF)
          perform format_check tables s_email1.
        else.
          message e000 with 'Problem in print settings'(003).
          stop.
        endif.
      endif.
    endform.                    " generate_spool
    *&      Form  fetch_recent_spool
          Fetch the recent spool number generated
    form fetch_recent_spool using p_v_spool type tsp01-rqident .
      data:  l_user like tsp01-rq2name.
      clear : v_rqident,
              v_rqclient,
              v_rqo1name.
      l_user = sy-uname.
    Get latest Spool No
      select single rqident
                    rqclient
                    rqo1name
             into (v_rqident , v_rqclient , v_rqo1name)
        from tsp01
       where rqcretime =   ( select max( rqcretime )
                                    from tsp01
                                   where rq2name eq l_user
                                     and rqfinal eq '.' ).
      if sy-subrc = 0 .
        p_v_spool = v_rqident.
      endif.
    endform.                    " fetch_recent_spool
    *&      Form  format_check
          Checking the format ( ABAP/OTF)
    form format_check tables p_s_email structure s_email.
      data : l_objtype    like rststype-type.
      call function 'RSTS_GET_ATTRIBUTES'
        exporting
          authority     = 'SP01'(019)
          client        = v_rqclient
          name          = v_rqo1name
          part          = 1
        importing
          objtype       = l_objtype
        exceptions
          fb_error      = 1
          fb_rsts_other = 2
          no_object     = 3
          no_permission = 4.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
      if l_objtype(3) = c_otf.
    Convert OTF Spool to PDF
        perform convert_otf2pdf tables p_s_email.
      else.
    Convert ABAP Spool to PDF
        perform convert_abap2pdf tables p_s_email.
      endif.
    endform.                    " format_check
    *&      Form  convert_otf2pdf
          Convert OTF Spool to PDF
    form convert_otf2pdf tables p_p_s_email structure s_email .
      clear   it_pdf.
      refresh it_pdf.
      data : l_bytecount  type i.
    Fn. to get the PDF format
      call function 'CONVERT_OTFSPOOLJOB_2_PDF'
        exporting
          src_spoolid              = v_rqident
          no_dialog                = 'X'
        importing
          pdf_bytecount            = l_bytecount
        tables
          pdf                      = it_pdf
        exceptions
          err_no_otf_spooljob      = 1
          err_no_spooljob          = 2
          err_no_permission        = 3
          err_conv_not_possible    = 4
          err_bad_dstdevice        = 5
          user_cancelled           = 6
          err_spoolerror           = 7
          err_temseerror           = 8
          err_btcjob_open_failed   = 9
          err_btcjob_submit_failed = 10
          err_btcjob_close_failed  = 11.
      if sy-subrc = 0.
    For page format
        perform page_format tables p_p_s_email.
      else.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    endform.                    " convert_otf2pdf
    *&      Form  convert_abap2pdf
           Convert ABAP Spool to PDF
    form convert_abap2pdf tables p_p_s_email structure s_email.
      clear   it_pdf.
      refresh it_pdf.
      data : l_bytecount  type i.
    Fn. to convert to PDF format
      call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
        exporting
          src_spoolid              = v_rqident
          no_dialog                = 'X'
        importing
          pdf_bytecount            = l_bytecount
        tables
          pdf                      = it_pdf
        exceptions
          err_no_abap_spooljob     = 1
          err_no_spooljob          = 2
          err_no_permission        = 3
          err_conv_not_possible    = 4
          err_bad_destdevice       = 5
          user_cancelled           = 6
          err_spoolerror           = 7
          err_temseerror           = 8
          err_btcjob_open_failed   = 9
          err_btcjob_submit_failed = 10
          err_btcjob_close_failed  = 11.
      if sy-subrc = 0.
    For page formatting
        perform page_format tables p_p_s_email.
      else.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    endform.                    " convert_abap2pdf
    *&      Form  send_mail
          For sending mail
    form send_mail tables mail structure s_email .
    Structures and internal tables for the send data
      data: objpack like sopcklsti1 occurs 2  with header line,
            objhead like solisti1   occurs 1  with header line,
            objbin  like solisti1   occurs 0  with header line,
            objtxt  like solisti1   occurs 10 with header line,
            reclist like somlreci1  occurs 5  with header line.
      data: doc_chng like sodocchgi1,
            tab_lines like sy-tabix.
    Data for the status output after sending
      data: sent_to_all like sonv-flag.
      clear: it_reclist, it_reclist[],
             it_objtxt , it_objtxt[],
             it_objpack, it_objpack[],
             it_objbin , it_objbin[],x_doc_chng.
      loop at it_html.
        objbin-line = it_html-line.
        append objbin.
        clear objbin.
      endloop.
    Create the document which is to be sent
      doc_chng-obj_name  = 'List'(012).
      doc_chng-obj_descr = 'Mail'(013).
    Heading
      objtxt-line = 'Mail with pdf attachment'(014).
      append objtxt.
      clear objtxt.
    Size
      describe table objtxt lines tab_lines.
      read table objtxt index tab_lines.
      doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
    Fill the fields of the packing_list for the main document:
      clear objpack-transf_bin.
    The document needs no header (head_num = 0)
      objpack-head_start = 1.
      objpack-head_num = 0.
    Body
      objpack-body_start = 1.
      objpack-body_num = tab_lines.
      objpack-doc_type = 'RAW'(015).
      append objpack.
    Create the attachment (the list itself)
      describe table objbin lines tab_lines.
    Fill the fields of the packing_list for the attachment:
      objpack-transf_bin = 'X'.
    Header
      objpack-head_start = 1.
      objpack-head_num = 0.
    Body
      objpack-body_start = 1.
      objpack-body_num = tab_lines.
      objpack-doc_type = 'PDF'(016).
      objpack-obj_name = 'Attachment'(017).
      objpack-obj_descr = 'Mail with pdf Attachment'(018).
      objpack-doc_size = tab_lines * 255.
      append objpack.
    *-Fill the mail recipient list
      loop at mail.
        reclist-receiver = mail-low.
        reclist-rec_type = c_u.
        append reclist.
        clear: reclist,
               mail.
      endloop.
    *-Send the document by calling the SAPoffice API1 module for sending
    *-documents with attachments
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        exporting
          document_data              = doc_chng
          put_in_outbox              = c_x
          commit_work                = c_x
        importing
          sent_to_all                = sent_to_all
        tables
          packing_list               = objpack
          object_header              = objhead
          contents_bin               = objbin
          contents_txt               = objtxt
          receivers                  = reclist
        exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
          others                     = 99.
      case sy-subrc .
        when 0.
          message i000 with 'Mail has been sent successfully'(006).
        when others.
          message e000 with 'Problem in sending the mail'(023).
      endcase.
    endform.                    " send_mail
    *&      Form  page_format
           For page foramtting
    form page_format tables email structure s_email .
      data : l_lines       type i,
             l_temp(500)   type c,
             l_offset      type p,
             l_lineslen(2) type p,
             l_mimelen(2)  type p,
             l_tabix       like sy-tabix.
      clear : it_xi_pdf,
              it_xi_temp.
      refresh : it_xi_pdf,
                it_xi_temp.
      it_xi_pdf[] = it_pdf[].
    Reformat the line to 255 characters wide (code from SAP)
      clear: l_temp, l_offset, it_xi_temp.
      describe table it_xi_pdf   lines  l_lines.
      describe field it_xi_pdf   length l_lineslen in character mode.
      describe field it_xi_temp  length l_mimelen in character mode.
      loop at it_xi_pdf.
        l_tabix = sy-tabix.
        move it_xi_pdf to l_temp+l_offset.
        if l_tabix = l_lines.
          l_lineslen = strlen( it_xi_pdf ).
        endif.
        l_offset = l_offset + l_lineslen.
        if l_offset ge l_mimelen.
          clear it_xi_temp.
          it_xi_temp = l_temp(l_mimelen).
          append it_xi_temp.
          shift l_temp by l_mimelen places.
          l_offset = l_offset - l_mimelen.
        endif.
        if l_tabix = l_lines.
          if l_offset gt 0.
            clear it_xi_temp.
            it_xi_temp = l_temp(l_offset).
            append it_xi_temp.
          endif.
        endif.
      endloop.
      clear : it_xi_mime,
              it_xi_mime[].
      loop at it_xi_temp.
        it_xi_mime(255) = it_xi_temp-line.
        append it_xi_mime.
        clear  it_xi_mime.
      endloop.
    Final Data
      clear : it_html,
              it_html[].
      it_html[] = it_xi_mime[].
    For sending mail
      perform send_mail tables email.
    endform.                    " page_format
    *&      Form  fetch_variants
          For fetching the variants available for the program
    form fetch_variants .
      data : l_program like rs38m-programm value 'RKAEP000',
             l_vara1 type dfies-fieldname value 'P_VARA1'.
      clear : it_variant1,
              it_variant1[].
    Get variants
      perform get_variants tables it_variant1
                           using l_program.
    F4 Help
      if not it_variant1[] is initial.
        perform get_f4_help tables it_variant1
                             using l_vara1
                            changing p_vara1.
      else.
        message e000 with 'No variants available for report1'(054).
      endif.
    endform.                    " fetch_variants
    *&      Form  validation
          For Validation
    form validation .
      data : l_pro1 like rs38m-programm value 'RKAEP000',
             l_pro2 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
             l_c1,
             l_c2.
    If both check-box are unchecked
      if p_c1 is initial
    and p_c2 is initial.
        message e000 with 'Check any one check-box'(049).
      endif.
    If checked without varaint
      if not p_c1 is initial and p_vara1 is initial.
        message e000 with 'Please give any one of the variant for report1'(055).
      endif.
    If checked without varaint
      if not p_c2 is initial and p_vara2 is initial.
        message e000 with 'Please give any one of the variant for report2'(061).
      endif.
    Reading the variant and fetching the mail-ids
      if p_c1 = c_x.
        l_c1 = '1'.
        clear : s_email,
                s_email[].
        perform read_variants tables it_mailid
                                     s_email
                               using p_vara1
                                     l_pro1
                                     l_c1.
        if s_email[] is initial.
          message e000 with 'No Id available for given Cost report1'(066).
        else.
          sort s_email by low.
          delete adjacent duplicates from s_email comparing low.
        endif.
      endif.
    Reading the variant and fetching the mail-ids
      if p_c2 = c_x.
        clear : s_email1,
                s_email1[].
        l_c2 = '2'.
        perform read_variants tables it_mailid1
                                     s_email1
                               using p_vara2
                                     l_pro2
                                     l_c2.
        if s_email1[] is initial.
          message e000 with 'No Id available for given Cost report2'(067).
        else.
          sort s_email1 by low.
          delete adjacent duplicates from s_email1 comparing low.
        endif.
      endif.
    endform.                    " validation
    *&      Form  GET_VARIANTS
          Fetching Variants
    form get_variants  tables   p_it_variant structure it_variant1
                       using    p_v_program  type rs38m-programm.
      select variant
             from varid
             into table p_it_variant
             where report = p_v_program.
    endform.                    " GET_VARIANTS
    *&      Form  GET_F4_HELP
          text
    form get_f4_help  tables   p_it_variant1 structure it_variant1
                       using   p_l_vara1 like dfies-fieldname
                      changing p_p_vara like p_vara1.
    Fn. for Pop-Up
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          retfield        = p_l_vara1
          value_org       = 'S'
          display         = ' '
        tables
          value_tab       = p_it_variant1
          return_tab      = it_return
        exceptions
          parameter_error = 1
          no_values_found = 2
          others          = 3.
      if sy-subrc = 0.
        p_p_vara = it_return-fieldval.
      else.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    endform.                    " GET_F4_HELP
    *&      Form  FETCH_VARIANTS1
          text
    form fetch_variants1 .
      data : v_program1 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
             l_vara2  type dfies-fieldname value 'P_VARA2'.
      clear : it_variant2,
              it_variant2[].
    Get Variants
      perform get_variants tables it_variant2
                           using v_program1.
    F4 Help
      if not it_variant2[] is initial.
        perform get_f4_help tables it_variant2
                            using  l_vara2
                          changing p_vara2.
      else.
        message e000 with 'No variants available for report2'(050).
      endif.
    endform.                    " FETCH_VARIANTS1
    *&      Form  read_variants
           Reading the variant and fetching the mail-ids
    form read_variants tables p_it_mailid structure it_mailid
                              p_s_email   structure s_email
                       using  p_p_vara1   like p_vara1
                              p_l_pro1    like rs38m-programm
                              p_l_c1      type c.
      data : l_temp(44),
             it_valutab like rsparams occurs 0 with header line.
      ranges : r_cocen for csks-kostl.
    Function Module to get the variant contents
      call function 'RS_VARIANT_CONTENTS'
        exporting
          report               = p_l_pro1
          variant              = p_p_vara1
        tables
          valutab              = it_valutab
        exceptions
          variant_non_existent = 1
          variant_obsolete     = 2
          others               = 3.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
      clear : r_cocen,
              r_cocen[].
      loop at it_valutab where selname = 'KOSTL'
                            or selname = '_C-CCTR'.
    Getting the range of cost centers
        if it_valutab-option = 'BT'.
          r_cocen-low    = it_valutab-low.
    For Conversion Routine
          perform conversion using r_cocen-low.
          r_cocen-high   = it_valutab-high.
    For Conversion Routine
          perform conversion using r_cocen-high.
          r_cocen-option = 'BT'.
          r_cocen-sign   = 'I'.
          append r_cocen.
          clear  r_cocen.
        endif.
    Getting the single cost centers
        if it_valutab-option = 'EQ'.
          r_cocen-low    = it_valutab-low.
    For Conversion Routine
          perform conversion using r_cocen-low.
          r_cocen-option = 'EQ'.
          r_cocen-sign   = 'I'.
          append r_cocen.
          clear  r_cocen.
        endif.
      endloop.
    If no cost centers
      if not r_cocen[] is initial.
        select kokrs
               kostl
               datbi
               telx1
          from csks
               into table p_it_mailid
         where kostl in r_cocen.
        if p_it_mailid[] is initial.
          if p_l_c1 = '1'.
            message e000 with 'No IDs available for report1'(059).
          elseif p_l_c1 = '2'.
            message e000 with 'No IDs available for report2'(062).
          endif.
        endif.
    Deleting the blank entries
        delete p_it_mailid where telx1 = space.
        clear l_temp.
        read table p_it_mailid index 1.
        l_temp = p_it_mailid-telx1.
        data : l_check.
        loop at p_it_mailid where telx1 <> l_temp.
          l_check = c_x.
        endloop.
    For checking the unique ids
        if l_check = c_x.
          if p_l_c1 = '1'.
            message e000 with 'No unique mail-ids for  report1'(058).
          elseif p_l_c1 = '2'.
            message e000 with 'No unique mail-ids for  report2'(065).
          endif.
        endif.
    Populating the IDs for the cost centers
        loop at p_it_mailid.
          set locale language sy-langu.
          translate p_it_mailid-telx1 to lower case.
          set locale language space .
          concatenate p_it_mailid-telx1 '@allergan.com' into l_temp.
          p_s_email-low = l_temp.
          p_s_email-sign = 'I'.
          p_s_email-option = 'EQ'.
          append p_s_email.
          clear  p_s_email.
        endloop.
      else.
        if p_l_c1 = '1'.
          message e000 with 'No Cost Center Available for report1'(057).
        elseif p_l_c1 = '2'.
          message e000 with 'No Cost Center Available for report2'(063).
        endif.
      endif.
    endform.                    " read_variants
    *&      Form  CONVERSION
          For Conversion Routine
    form conversion  using    p_it_valutab_low type c.
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
        exporting
          input  = p_it_valutab_low
        importing
          output = p_it_valutab_low.
    endform.                    " CONVERSION
    REPORT Z_RMTIWARI_SEND_SPOOL_MAIL_ATT .
    PARAMETERS : P_SPOOL TYPE TSP01-RQIDENT OBLIGATORY .
    PARAMETERS : P_MAIL TYPE char100 OBLIGATORY .
    TYPES : TY_LINE type string.
    DATA: IT_ATTACHMENT TYPE soli OCCURS 0 WITH HEADER LINE.
    DATA: IT_ATTACHMENT_LONG TYPE TY_LINE OCCURS 0 WITH HEADER LINE.
    DATA: LV_PDF_SIZE type i.
    DATA: LT_PDF type standard table of tline with header line.
    PERFORM SEND_EMAIL USING P_SPOOL P_MAIL.
    FORM send_email
    --> X_SPOOL_ID
    --> X_EMAIL
    FORM send_email USING X_SPOOL_ID X_EMAIL.
    DATA: LT_OBJPACK LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
    LT_OBJHEAD LIKE solisti1 OCCURS 1 WITH HEADER LINE,
    LT_OBJBIN LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    LT_OBJTXT LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    LT_RECLIST LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
    LV_DOCUMENT_DATA TYPE sodocchgi1.
    DATA: L_ATT_LINES TYPE i.
    DATA : LV_SPOOL_DESC(68) type c.
    CHECK NOT ( X_EMAIL IS INITIAL ).
    CLEAR: LT_RECLIST, LT_RECLIST[],
    LT_OBJHEAD, LT_OBJHEAD[],
    LT_OBJTXT, LT_OBJTXT[],
    LT_OBJBIN, LT_OBJBIN[],
    LT_OBJPACK, LT_OBJPACK[].
    CLEAR LV_DOCUMENT_DATA.
    Read spool and get the pdf internal table and name of spool
    PERFORM READ_SPOOL USING X_SPOOL_ID LV_SPOOL_DESC.
    CHECK NOT ( LT_PDF[] IS INITIAL ).
    Convert pdf itab to 255 line itab.
    data :LV_COUNTER type i.
    data :LV_FROM type i.
    loop at LT_PDF.
    translate LT_PDF using ' ~' .
    concatenate IT_ATTACHMENT_LONG LT_PDF into it_attachment_long.
    endloop.
    translate IT_ATTACHMENT_LONG using '~ ' .
    append IT_ATTACHMENT_LONG.
    clear : LV_COUNTER.
    DO.
    LV_COUNTER = strlen( IT_ATTACHMENT_LONG ).
    if LV_COUNTER ge 255.
    IT_ATTACHMENT = IT_ATTACHMENT_LONG(255).
    append IT_ATTACHMENT.
    SHIFT IT_ATTACHMENT_LONG by 255 places.
    else.
    IT_ATTACHMENT = IT_ATTACHMENT_LONG(lv_counter).
    append IT_ATTACHMENT.
    exit.
    endif.
    ENDDO.
    Body of email
    MOVE 'Email sent to you from SAP' TO LT_OBJTXT.
    APPEND LT_OBJTXT.
    LV_DOCUMENT_DATA-obj_name = 'SpoolMail'.
    Title of the email as spool name
    LV_DOCUMENT_DATA-obj_descr = LV_SPOOL_DESC.
    LV_DOCUMENT_DATA-sensitivty = 'O'.
    LV_DOCUMENT_DATA-expiry_dat = SY-datum + 15.
    LV_DOCUMENT_DATA-doc_size = STRLEN( LT_OBJTXT ).
    e-mail body
    CLEAR LT_OBJPACK.
    LT_OBJPACK-head_start = 1.
    LT_OBJPACK-head_num = 0.
    LT_OBJPACK-body_start = 1.
    LT_OBJPACK-body_num = 1.
    LT_OBJPACK-doc_type = 'RAW'.
    LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
    APPEND LT_OBJPACK.
    For e-mail attachment
    DESCRIBE TABLE IT_ATTACHMENT LINES L_ATT_LINES.
    READ TABLE IT_ATTACHMENT INDEX L_ATT_LINES.
    CLEAR LT_OBJPACK.
    LT_OBJPACK-transf_bin = 'X'.
    LT_OBJPACK-head_start = 1.
    LT_OBJPACK-head_num = 1.
    LT_OBJPACK-body_start = 1.
    LT_OBJPACK-body_num = L_ATT_LINES.
    LT_OBJPACK-doc_type = 'PDF'.
    LT_OBJPACK-obj_name = 'email'.
    LT_OBJPACK-obj_descr = LV_SPOOL_DESC.
    LT_OBJPACK-doc_size = ( 255 * ( L_ATT_LINES - 1 ) ) + STRLEN( IT_ATTACHMENT-line ).
    APPEND LT_OBJPACK.
    make recipient list
    LT_RECLIST-receiver = X_EMAIL.
    LT_RECLIST-rec_type = 'B'. "To external email id
    APPEND LT_RECLIST.
    send mail with attachment
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = LV_DOCUMENT_DATA
    put_in_outbox = 'X'
    TABLES
    packing_list = LT_OBJPACK
    object_header = LT_OBJHEAD
    contents_bin = IT_ATTACHMENT
    contents_txt = LT_OBJTXT
    receivers = LT_RECLIST
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    If SY-subrc = 0.
    write:/ 'Message sent'.
    else.
    write:/ 'Error encountered'.
    endif.
    ENDFORM. " send_email
    *& Form read_spool
    FORM read_spool USING X_SPOOL_ID Y_SPOOL_DESC.
    DATA : LV_SPOOL_TYPE TYPE TSP01-RQDOCTYPE.
    SELECT SINGLE RQDOCTYPE RQTITLE
    INTO (lv_spool_type, y_spool_desc)
    FROM TSP01
    WHERE RQIDENT eq X_SPOOL_ID.
    IF Y_SPOOL_DESC IS INITIAL.
    concatenate 'Spool-' X_SPOOL_ID into Y_SPOOL_DESC.
    ENDIF.
    IF LV_SPOOL_TYPE eq 'LIST'. " If spool is a list
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
    SRC_SPOOLID

  • Problem with out going mail. I can send from my iPad but not my MacBook Air yet settings are the same.

    Problem with out going mail. I can send from my iPad but not my MacBook Air, yet settings are the same. Can anyone advise?

    Hi sointoit,
    If you are having issues sending mail from your MacBook Air, you may find the following article helpful:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Cheers,
    - Brenden

  • Mail won't send from my website email account

    Using a mac book pro, Mail from home wi-fi.
    I am having trouble sending emails from my website email account. It is ok sending from my gmail account, and will occasionally send from wi-fi spots. I need it to send from home and other locations. Any ideas?

    Using a mac book pro, Mail from home wi-fi.
    I am having trouble sending emails from my website email account. It is ok sending from my gmail account, and will occasionally send from wi-fi spots. I need it to send from home and other locations. Any ideas?

  • TS3276 Mail will not send from any of my accounts & connection doctor indicates that I am connected

    Mail will not send from any of my accounts & connection doctor indicates that I am connected

    When did this start?
    What specifically happens when you try to send Mail?
    Are you able to receive mail from all of the accounts? any of the accounts?
    Are all the email accounts with the same provider?
    In Console > All messages search on Mail and see if there are any error messages

  • Mail.app will not send (att) mail. Web mail and Thunderbird can send.

    Mail.app will not send (att) mail. Web mail and Thunderbird can send.

    I'm having the exact same problem on my iMac. I can receive email from imap.mail.yahoo.com, but cannot receive from smtp.mail.yahoo.com. I have not changed these settings in years and as of a few days ago they stopped working. These settings work fine on my iPhone and iPad.
    So far I have:
    -Deleted accounts and reestablished them
    -Deleted the Mail preference file ->com.apple.mail.plist

  • Why is the 'send' icon greyed out in mail? I cant send any mail.

    Recently bought bought a Macbook pro so i'm new to this! My mail has been working fine both sending and receiving but recently the send icon is greyed out and I cant send anything! Any help would be appreciated.
    Thanks.

    Thanks for your reply. I tried it but it didn't work. After some playing around I found that the outgoing mail preferences had altered. Not sure why the setting changed but never the less its working again. Thanks again

  • HT1277 i have added my company e-mail add into my Macbook i receive mails but i cant send e-mails , anyone knows why ? i have tried all options in outgoing mail settings but it wont work !!

    i have added my company e-mail add into my MacBook , i recive e-mails but i cant send e-mails , anyone knows why ? i have tried all options in outgoing mail settings but it wont work !!

    Hello,
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

  • Lost Mail and Address Book ikons from HD

    Preparing to upgrade to Tiger OX 10 from Panther. Recommended backup all vital info. In transfer process, both Mail and Address Book ikons from HD to backup Superdisk repeatedly came up Error 50. Only success was to lose both ikons from HD and Question Mark on Address Book in dock rendering it useless. Now have Mail and a Mail copy ikon on Desktop that will not open. Likewise an Address Book ikon and four copies on Desktop that will not open. Fortunate that Mail ikon in Dock still operates allowing acess to Mail and Address Book on Mail site.
    Would like to move forward. Help for an average computer user would be greatly appreciated.

    Sorry for the delayed response to your e-mail. Thank you very much for taking the time to addressing my problem.
    After posting the question the hard drive further deteriorated to the point where the computer became inoperative. Ended up with a new computer and a major challenge in transferring info from old to new computer. After a long day with two friends and computer programmers by day, we succeeded in retrieving and transferring the info. Whee!
    Thanks again for taking the time to address my question.

  • I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

    I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

    Hi,
    According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
    Roger Lu
    TechNet Community Support

  • How to move Mail and Address book content from 10.3 emac to 10.5 iMac

    How do I move Mail and Address book content from my old 10.3 emac to my new 10.5 Leopard iMac directly, or do I have to move the names etc, one by one?
    Richard

    I cannot find a migration assistant. I have copied the Mail and Address Book applications over from 10.3 to 10.5 and tried using mailboxes import, but 10.5 Mail will not accept any of the options. The same for address book. Can you give more specific instructions?
    The applications, Mail and Address Book, don't actually store your data in the application. So, moving the applications over to your new computer will have no useful effect and could be detrimental if you replaced the newer versions with the old.
    Migration Assistant is in you Utilities folder and should have asked to be run during the installation.
    Your Mail data is stored in yourUserName/Library/Mail. The Address Book data is stored in yourUserName/Library/Application Support/AddressBook. If your new installation is blank with no data, you can actually replace those directories on the 10.5 version with the old. For Mail, you also have to get the com.apple.mail.plist file from your old username/Library/Preferences/ folder and put it in the new 10.5 folder of the same name. Once that is done, when you open Mail and Address Book, they will update the data to the new format.
    Migration Assistant will do all of this for you.
    EDIT: Based on roam's comments, you may have to move the Mail manually. You can also just bring the Mail directory over to the 10.5 machine and use Mail's Import command to get all the mail out of the old Mail directory.
    Message was edited by: Barney-15E

Maybe you are looking for