Mail and Key board issues with Mavericks 9.2
I am using a Mac Pro and have just uploaded Mavericks 9.2 upgrade.
I am now experiencing erratic response to key board commands, while typing and Mac Mail is sometimes unresponsive. My epson photo stylus 1400 printer driver also bacame unresponsive. This issue was resolved by uninstalling the driver, re-installing the original driver >reloading the upgrades from Epson via software update>adding the newly installed printer to the preferences. Presently the printer is working just fine, but the Mac Mail menu bar is blinking uncontrollabley and is unresponsive until I quit it and reboot the program. Anyon else having these issues?
Problem resolved by restting the PRAM.
Similar Messages
-
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
-
Any fix for the PC based network printer communication issue with Mavericks?
Any fix for the PC based network printer communication issue with Mavericks?
I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps. -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
Mail and Address Book Issues in 10.4.5
Hello:
I recently updated to 10.4.5 and have some issues with mail and address book.
1. MAIL: All the mail on my machine has been "reformatted" for lack of a better term. Each line in a paragraph is about 1.5" above the next. This is the same for all messages. This just appeared after I updated to 10.4.5. Suggestions? Has anyone else experienced this? If so, what was the solution?
2. ADDRESS BOOK: All of my addresses just have the name. Apparently, everything else has disappeared (Phone, e-mail, notes, etc.) Ex: John Smith... That is all I have for all 346 records. Naturally, I have the data backed up on .mac, but before I re-sync (assuming that works) I want to resolve the issue to prevent it from happening again. I have tried renaming files in the user>library>application support>address book from AddressBook.data.previous to just AddressBook.data to no avail. Any suggestions?
Thanks in advance!
Richard
G5 1.8 Single Mac OS X (10.4.5)
G5 1.8 Single Mac OS X (10.4.5)You may want to review recent threads about similar problems in this forum before re-syncing your data with .Mac. Yes, it might work, but not the way you expect...
Lost all of my contacts in Address Book
address book completely empty!
iMac G5 17" (iSight) Mac OS X (10.4.4) -
I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
HT6030 Sound output issue with Mavericks
There is a sound output issue with Mavericks and Firewire800 Audio devices. I am using a MIO 2882 but now people are having issues with other devices as well. Is this something that will be addressed in an update? If not I will need to downgrade my OS.
maybe the adapter went bad.....fast. try getting one thats made by sony. or apple. i have had bad luck with some cheap products i bought.
or maybe thats the brand you have ad luck with. i remember when i use to get some quantom fireball drives, and they just died on me the next week. im down to two and keeping a good eye on them. especially fujitsu. the only ones i have GREAT LUCK with are Seagate and Western digitals drives. -
Does a wireless key board work with a macbook pro
does a wireless key board work with a macbook pro
what brand wireless keyboard? What version of OS X are you running (you have iOS 6.0.1 listed, but that is for iPhones and iPads) and what model macbook do you have?
-
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
Hi. I was having slowness problems with my Macbook Pro and thought I would re-install Lion but put Snow Leopard back on by mistake. I bought the computer used with Lion on it and don't have access to the USB drive or a username/password to reinstall Lion. Now I can't access Mail or iPhoto since I put Snow Leopard on.
Is there a way to get my Mail and iPhoto working again with Snow Leopard or do I have to "re-upgrade" to Lion?
Thanks!
SteveYou can't. When you converted those libraries to Lion's format, you lost the ability to go backwards. Unless you saved a bootable backup./clone or Time Machine backup of your previous SL installation, you're up the proverbial creek w/o a paddle.
-
I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?
Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"
Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel -
Next and previous button issue with Prettyphoto in filtered gallery
Hi there,
I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
(next and previous buttun are there as well social connection)
My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
(social connection is there but no next and previous buttons??)
Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
Your help we muchly appriciated,
Best Regards,
Rolfbump PLEASE HELP
-
I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.
System requirements | After Effects
-
hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.
the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...
Maybe you are looking for
-
How to define a pre-created style to a paragraph in a word document?
hello, In a word document, I have created several styles for paragraphs. In my application, I create a CNiWordDocument object and I want to set the style for the current paragraph. How to use the function : setProperty? Thank you very much.
-
Problem with starting Premiere Pro
Hello I have some problem with Premiere Pro and Creative Cloud. When I start the program I got a window with this message: "your entire creative world, now all in one place. Then I got one option: "license this software. I press that option and got a
-
Express Message to Users - How to
hi all, i want to send Express Message to all Current Users in the one application Server. How can i do that? I can able to see all the Users by Using SM04. with this one can i Send Express message? or i have use some other Tcode.? Thnx,
-
here's the jsp <%@ page language="java" import="java.util.*" pageEncoding="ISO-8859-1"%> <jsp:useBean id="mybean" class="beans.MyBean" scope="page"></jsp:useBean> <!-- means u can call the methods in the bean using the object --> <jsp:setProperty p
-
How come most people think it's an isolated Alu iMac issues?
My old PC couldn't do what I needed it to do anymore so I desperately needed a new computer for my project. I was going to go Apple's London store and move a new Alu iMac home immediately, but before I did that I came to this forum ... And that's how