Mail and pop accounts - mail does not retrieve the new messages

Hi, for any reason for last two days my mail application is not able to retrieve my e-mails from my pop account. However I can read and reply the e-mails through the web portal.
Mail.app seems to connect properly to the pop account but it is not able to sync the messages.
Have you ever seem this behaviour?
Miguel

Miguel,
Welcome to the Discussions.
Is there any symbol beside the mailboxes of this account? Have you checked to see if the account is Offline? This is different than not be connected, since in Mail each account can separately be taken offline. Click on Mailbox in the Menubar, and check Online Status (available if two or more accounts) or if only one account, whether Go Online is black or Go Offline is black?
Ernie

Similar Messages

  • The "send link" feature only opens my windows live mail. it does not open the new message or transfer the link

    windows 7
    currently using firefox 5 but problem occurred with version 4
    windows live mail

    Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)

  • HT2500 When I am viewing the latest message in a conversation in Mail in the preview and want to reply, I hit reply and it does not include the latest message?  I have to double click the latest message to open it and then reply.  Am I missing a setting t

    When I am viewing the latest message in a conversation in Mail in the preview and want to reply, I hit reply and it does not include the latest message?  I have to double click the latest message to open it and then reply.  I find this irritating and would like to skip this step and be able to reply from preview and include that message.  Am I missing a setting to fix this?

    I have found that if you have highlighted some text in the message and then hit reply, the highlighted section is the only bit included in the reply.  You need to click on the message in the middle list rather than the preview pain on the righthand side and it should reply normally.  To check it's doing this, select a message in the middle section of the screnn then use the down arrow to drop to the next message. Hit reply, and it should reply normally.  I hope this helps.

  • When starting up Mail 7.3 does not provide a New Message window

    When starting up Mail 7.3 does not provide a New Message window as it always used to? Have I inadvertently turned something off?

    OOPs! My mistake; I meant New Viewer Window!
    The problem is that if I close the Mail window but leave Mail running in the background, the next time I click on Mail in the Dock, I do NOT get the New Viewer Window, just the Mail Menu on the Menu Bar. If I Quit Mail in that state and then start it up from the Dock, I also get on the Mail Menu.
    If, however, I Quit Mail when the Viewer Window is open, it will open up again with the New Viewer Window visible.
    In the past, I got the New Viewer Window whenever I clicked Mail in the Dock.
    Changing settings in System Preferences / General  doesn't make any difference.
    Not a huge problem, just an annoyance. Ran Permissions Repair; no change in the issue.
    Thanks for your response / attempt to help. Sorry again for the mistaken Window name.
    Keithric

  • Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

    Hi All,
    This is my first post to ms exchange forum am getting  Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
    or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
    with exchange (rest  IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
    Exchange 2013 CU6 with server 2012 Std 64Bit
    Thanks,
    Murali 

    Dear All,
    I have found the solution for above problem, the problem has occur due to PopProxy inactivity
    please find relevant exchange management shell commends below.
    1. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Inactive
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Active
    2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
    -State Active
    3. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Active
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Activ
    Replace yourmailserver.com with your server host name.
    Thanks

  • I changed my apple id on my computer and my iPad does not recognize the new id

    I changed my Apple id on my computer and my ipad does not recognize the new id and continues to display the old id. How can I get it to change to the new id?

    Easy Fix: On your iPad, go into Settings>Mail,Contacts,Calendars and click on your hotmail account. Simply replace the password that's already there with your new one. Then, I recommend rebooting your iPad:
    To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
    If you've already tried this, then the next step would be to delet your hotmail account from your iPad (also in Settings>Mail, Contacts, Calendars) and then reboot the iPad and add the account back again.

  • HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

    I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

    iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I have just bought an iPod Nano to replace my previous one which died,when I open my iTunes it does not show the new iPod, and refuses to allow me to sync my existing library, the new iPod does not show in my computer only on devices, any suggestions ?

    Question: I have just bought an iPod Nano to replace my previous one which "died" My computer does not recognize the new iPod and only shows it in devices and printers. I cannot sync my existing iTunes to the new iPod, there is no way I can do it. Any help please?

    Hey there longislandmacca,
    It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • How do I transfer music and photos from my Power Mac G5 to my new iMac. Have an old FireWire but it does not fit the new iMac

    I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.

    You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
    Format the drive info here.
    Backup and restore info
    https://discussions.apple.com/message/16276201#16276201

  • When I open iWeb it does not "Highlight" the New site or new page options. It ahs had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option.  That has jump started iWeb for others.  I could take a couple of tries.
    If that doesn't work try the following:
    1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iWeb folder. 
    Click to view full size
    3 - launch iWeb and try again.
    OT

  • I applied a template to a page with SWFs and now that page does not play the SWFs. Why?

    I applied a template to a page with SWFs and now that page does not play the SWFs (just a blank area where the SWF should be). When I detach the template it will play the flash file. This site will eventually be updated via Adobe Contribute. And I just discovered that when applying a template to a page that uses HTML datasets (Master/Detail),it no longer reads the Master/detail regions and displays a blank. Any thoughts?
    [Moved to Dreamweaver forum by moderator]

    Firstly, you shouldn't really 'apply' a template to a page, you should create a child page by going to FILE>NEW>Page from Template.  Too many things can happen when applying a template the way you are doing it. eg:; editable and non-editable regions not matching up and being asked where to place these regions and in all likelihood, you end up with 2 or more of the same region.
    When a swf file is inserted into a page, a corresponding Scripts folder is written automatically is stored in the root of the site - it is also linked to in the head of the document. What I believe is happening is that when you apply a template to the page, the Template has no idea that there is a swf file on the page and is not aware of the correct link to the Scripts folder.  If you do a test and add the swf file to the template page itself, I bet that the links to the swf and the scripts folder are correct - because DW knows the correct path to the script file.   Hence the reason the page probably works when you detach it from a template.

  • I just updated to OS X mountain lion and my notification widow does not have the twitter/facebook feature any way i can set it up or turn it on?

    I just updated to OS X mountain lion and my notification widow does not have the twitter/facebook feature any way i can set it up or turn it on?

    While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • I upgrade from LR3 to LR5 and the basic panel is the old format...does not have the new sliders that

    and the basic panel is the old format...does not have the new sliders that were introduced in LR 4. Using Windows 7 if that matters.
    still seeing fill light and recovery instead of shadows and highlights
    thanks
    jp

    You have to change the photo to Process Version 2012.
    Under the histogram in the develop module is a Lightning Bolt icon. Click on it.

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

Maybe you are looking for