Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN

Dear All,
i have the folloing case :
i am using ASA as Certificate authority for cisco anyconnect VPN users,the authentication happens based on the local database of the ASA,
i want to issue a new certificate every 72 hours for the users ,and i want to send the one time password via email to each user.
so what the setting of the mail and smtp server should be ,
was i understand i should put my smtp server ip address then i have to create the local users again under(Remte VPN VPN--Certificate management--Local certificate authority --Manage user Database) along with their email addresses to send the one time passsword to them via their emails.
i sent the email manually ,hwo can automate sending the OTP to our VPN users automatically vi their emails?
Best regards,

Thanks Jennifer.
I did manage to configure LDAP attribute map to the specific group policy.
Nevertheless, I was thinking whether I can have fixed IP address tied to individual user.
Using legacy Cisco VPN Client, I can do it using IPSEC(IKEv1) Connection profile, where I set Pre-Shared Key and Client Address Pools. Each Client Address Pools has only 1 fix IP address.
Example: let say my username is LLH.
Connection Profile for me is : LLH-Connection-Profile, my profile is protected by preshared key.
Client Address Pool for me is : LLH-pool, and the IP is 172.16.1.11
Only me know the preshared key and only me can login with my Connection Profile.
Using AnyConnect, I have problem. User can use any connection profile because I cannot set preshared key for AnyConnect. In that case, I cannot control who can use my Connection Profile and pretend to be me.
Example:
AnyConnect Connection Profile for me is : LLH-Connection-Profile, without any password
Client Address Pool for me is : LLH-pool, IP is 172.16.1.11
Any body can use LLH-Connection-Profile, login with another user name, let say user-abc which is a valid user in LDAP server. In that case, ASA assign 172.16.1.11 to user-abc and this user-abc can access server which only allow my IP to access.
I hope above description can paint the scenario clearer.
Thanks in advance for all the help and comment given.

Similar Messages

How to make email client account setup automatically select inbound mail and smtp server.

I have the mail service successfully running on OS X Server 10.8.2. I am able to send and receive email as well as setup email accounts on various email clients (iphone, ipad, mac, etc). I notice that when I set up a new account that I have to specify both the inbound and smtp mail servers as well as specifying the user id for each. I am using an SSL certificate that appears to be working. The ports are selected (993/995 and 587) automatically and the default is to use SSL.
However, when I set up a Comcast account - (configured as "other") - I only have to enter Full name, email address and password - and from this it is able to determine that the incoming mail server is "mail.comcast.net" and outgoing smtp server is "smtp.comcast.net". It also fills in the userid and password for both inbound and smtp servers - as well as the ports. I have been trying to get this to work automatically when setting up accounts for my mail server - but have not been able to figure out how to do this - or if it is possible.
In googling - I have found that I can set up several different SRV records such as (_submission._tcp, _imap._tcp, _imaps._tcp, _pop3._tcp, _pop3s._tcp) and these are supposed to provide this functionality to email clients that are able to use the SRV records. I have set these up externally at my registered domain provider - and I am able to query them via nslookup, dig and host.
Is Comcast using some other special method of providing the server names to the mail client setup - or am I doing something wrong - or is this a functionality that needs to be supported on the mail server side as well. I am relatively new to mail servers and trying to work my way through the learning process.

Understand the functionality you are wanting, basically one can use Outlook / Exchange mail server as an example. It just happens.
As I understand in the background the DNS _SRV records point to a machine which serves up an XML file and that is the information which tells the client how to configure itself.
I did some research before posting my first reply and found that, in the Apple client situation, even when someone setup the the SRV records + the XML it didn't work seamlessly.
https://discussions.apple.com/message/12949449#12949449
Here's some other links that give some more background.
https://groups.google.com/forum/#!msg/macenterprise/qIKUMxMae8o/iLnIkMgeOX0J
http://www.virtuworks.com/how-to-setup-outlook-autodiscovery-for-your-domain/
If you were going to persue it you will need to find out the format for the autodiscovery XML file. Also the XML file will have to be hosted on your server, you couldn't likely put it on the public DNS server.

I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settings

You probably have changing settings disabled in Restrictions.

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone

I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone

What mail program from what kind of computer are you sending your email? It sounds like an encoding problem that would have to be solved on the sending end. If you want, send me an example of the kind of email which arrives as gibberish on your iphone (tom at bluesky dot org).

Issues with Mail and SMTP and Gmail Accounts

So this isn't a question....more like a solution that I had to figure out.
We have multiple gmail accounts in our family and after upgrading to OSC Yosemite our gmail accounts wen't haywire. My wife was sending emails that eventually were sent from my gmail account (mass neighborhood emails at that.....and all replies came to me instead of her). I spent about 2 hours investigating and put together several different threads that finally fixed out problem. The root of the issue is that you can share the same Incoming Mail Server for all of your gmail accounts and your mail will go to the accounts that it is supposed to go to, but you have to have individual Outgoing Mail Servers for each of your accounts otherwise all outgoing mail will come from one account only. I don't know why this happened, it is a pain in the butt, but here's how I fixed it with 3 gmail accounts running through 1 mac.
1st - you need to remove all of your gmail accounts from mail via Internet Accounts in Settings. Just highlight the account and hit the minus sign at the bottom. You won't lose anything if you have your gmail settings set to default which backs everything up to Google's servers....it will all load back to you mac and it will all be available online at gmail.com
2nd - you need to add back all of your accounts one at a time (and follow all of the following steps for each account before adding another). Select the plus sign and choose Google (for gmail accounts only).
3rd - Give your gmail account a recognizable name in the "Name" field (if you have multiple Gmail accounts to add, you will want to distinguish between them).
4th - type in your username ([email protected]) and password. Make sure to add the suffix @gmail.com.
5th - Check the boxes that you want to add to your mac (mail, contacts, calendars, messages, notes).
6th - Click the "Details" button to ensure that you have an adequate description (see # 3 above) if you are going to have multiple gmail accounts to add.
7th - Open the Mail app.
8th - From Mail Preferences/Account Information Tab - make sure that you account is Enabled (check box next to "Enable Account", make sure that you have an adequate description name, email address is correct, Incoming mail server is imap.gmail.com, Username is your normal gmail login username (absent any suffix like .gmail.com), password is your gmail password.
9th - Then, from Preferences click on the Advanced tab and....Uncheck "Automatically detect and maintain account settings".
10th - Then, go back to Account Information Tab and.....from the Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP List....
11th - You need to create an individual SMTP Server Account for each gmail account that you plan to add.
12th - To do this click the plus button. Server Name should always be smtp.gmail.com. Type in your own Description (I recommend naming it after the gmail account that you plan to attach it to).
13th - TLS Certificate should be "None"
14th - Click the Advanced Tab - From here, uncheck the box for "Automatically detect and maintain account settings". Then make sure Port is 587 (default is 25 for some ungodly reason). Check the box for "Use SSL".
15th - Set authentication to "Password". User name MUST contain a suffice (i.e [email protected]). Password is your normal gmail password.
16th - Click OK.
17th - Now your back at Preferences/Account Information - Link your account to the SMTP server that you just created by using the dropdown box next to Outgoing Mail Server (SMTP).
18th - Save all changes and close out of Mail App.
19th - Restart Mail and recheck steps 8-15....for some reason my passwords kept getting erased, but they eventually saved and took.
20th - Add another gmail account by following these steps and then recheck all along the way for passwords, suffixes, everything. You will want to make sure that your accounts are all properly linked to their respective Outgoing Mail Servers (hence the distinct naming descriptions).
21st - Once you have added multiple accounts send email between them to make sure that they are being sent from and received to the correct accounts.

Wow! Oh my goodness Patrick, thank you so much man. That's a ton of informatiion to take the time to write out step by step and share with strangers. I really, really am grateful to you. I've been dealing with this for a month, half the month I kept changing my passwords and kept assuming I was making some mistake. It used to work fine. About a week ago I started looking for a solution and couldn't find one that worked.
You have changed that sir! I'm good to go, stress level will lower when I am on my Mac, and I'm so glad to not have all these messages popping back up that I was done with!
Muchos Gracias Amigo! Owe you one...

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

Windows Server 2008 R2 Standard "Certificate Authority Service" / Exchange Server 2010 EMC not starting and no AD connectivity for authentication.

Hello,
I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
* Note. No back ups to work with aside from whats mentioned below.
DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up.
The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
"No Exchange servers are available in any Active Directory sites. You can’t connect to remote
Powershell on a computer that only has the Management Tools role installed."
Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc per instructions only to discover I couldnt relaunch it because there was
no way how. So I copied another msc file that happened to be on the DC Server 1 back to Exchange Server 2 and got it to launch again.
Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
it is using the Certificate Authority Service.
I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
"The Trust Relationship between this workstation and primary domain failed."
I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started.
I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
Marty

I recommend that you open a ticket with Microsoft Support before you break things more.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Mailing without SMTP-Server

Hello Forum,
in the cf8-Administrator I can configure a SMTP-Server with
Username and Password for sending Mails via CF.
Is there a way to connect to a simple Mail-Account with
pop..... and smtp.... , because I don't want to administrate a
mailserver on my webserver.
Or do you now a free (or cheap) mailserver-provider, which I
can configure with: smtp-server-name,etc.
Thank you for any help!
uwe

Solution:
Sorry for asking such a stupid question!!!
I don't need a complete Mailserver. I have filled in the
smtp-Server-address, accountname and password of my
personal-mailbox at my provider.
IT WORKS!

SMICM error while sending mail using SMTP server

Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanks

also getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

Sending Mail through SMTP server

Hi
I am trying to sent the mails through smtp server but but my smtp server is not reponding, I tried to delete the account & recreated the accounts & the smtp server but unable to do that, but creating the same mail account & same smtp server works in different laptop. can any one guide me how to correct the problem & repair it.
Thanks in advance for the support.

There are a couple of things you might check:
make sure that you have the server name entered correctly (for example, stmp.gmail.com)
make sure that if you have to override the default port that you have
make sure that if SSL is required to connect that you've this option ticked, and
make sure that if you need to provide a user name and password to access the server that you have.
Other than that, that's about all that I can think of.
Clinton

How to best set up a mail and calendar server for a church

I am the IT guy for a smaller church of 200 regular attendees. We want to start hosting our own mail and calendar server. We bought a mac mini and installed mac os x server. So far I have enabled the mail, calendar, and contacts sections of the server but we aren't live quite yet (domain is not pointed at the server yet). My question is, I do not know much about profile manager or open directory, would those benefit me at all? I do not wish to manage devices, I just want to make the most use out of the computer as a mail server primarily. I have found some limitations on users and groups where I wish I could do more (such as creating mailing lists that include e-mails that are not hosted from within the server without creating a user that forwards to personal e-mail for every person).
Would open directory and/or profile manager add more functionality to the computer as a mail server?
Thank you

@camelot
What is it exactly open directory will give me that I cannot do with the regular software in this regard? I am not sure what you mean by a signle shared mailbox and calendar.
@cpragman
Google apps for business was something I was looking into at one point but decided not to use it. Once we grow more I can see us moving over to it but with just maybe 5 people tops having a real e-mail address it seems a little overkill. (I apologize, I omitted that from my original question, i only put in the number of attendees)
@Lincdavis
Fortunately I don't care about whether they can create it themselves or not . And your comment about creating a sharing-only user. Do you mean for every external e-mail I want in a mailing list, I need to create a user for them (with services disabled) and then change mail options to forward to their personal e-mail?
Then go back to groups, create a group that can be e-mailed, and add those users to it?
Thanks

Third Party CA certificate requirement for Cisco expressway C and E

Hi All,
We have implemented MRA solution for our customer, We had ask to procure the CA certificate from Third party CA certificate issuing vendor.
We had shared CSR request generated from Expressway C and E application to generate SSL certificate, As per cisco document we had ask to procure “Quick SSL premium single domain” CA certificate for Expressway Series E and C server but as per the certificate issuing vendor, the application required “Quick SSL premium multi domain” as they observed extra SANs in CSR generated from the Expressway C and E applications. Need help to find out application required certificate, who are using Third Party CA certificate for MRA solution.

First of all, I don't see how you cant get away with single domain certificate. I have looked into this more. This is because you need to add your domain name in the SAN as detailed below.
Secondly, I am not sure where you are going to generate the certificates from..You should generate your CSR from here..
Go to Maintenance > Security certificates > Server certificate
NB: Customer’s service discovery domain is required to be included as a DNS SAN in all Expressway-E server certificates
This is what the CSR page looks like

Ican't remember my Alternative mail and i won't to change my bassword for my apple id please hellp me

ican't remember my Alternative mail and i won't to change my bassword for my apple id please hellp me

You can log into your account via http://appleid.apple.com and view the email addresses on your account.

Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN

Similar Messages

Maybe you are looking for