Mail.app - Blackberry (T-Mobile) and POP3

My issue seems to suggest that I need to check with my Blackberry BES provider, but it only started after I began using Snow Leopard. Hence I thought I give this forum a try.... here it goes:
Replaced MB Black with MB Pro ~ 3 months ago. Did manual data transfer and configuration. Setup mail in the same fashion on new MB with 2 IMAP accounts and the one POP3 mail account in question.
I did not change anything on my Blackberry mail configuration as part of the MB replacement.
Setup is as follows:
- mail.app to download messages from POP3 and delete only when moved from inbox
- wireless sync is enabled in Blackberry device and also on backend setup at carrier (meaning, deletions should sync)
In the past (old MB), when I removed a POP3 message from Blackberry, it was removed from the POP mailbox as well and disappeared in mail.app accordingly (meaning, it was moved to the trash bin).
Since the upgrade to Snow Leopard, mail.app keeps showing POP3 messages in the inbox as unread after they have been deleted on the Blackberry (waiting does not help - they just remain there until I delete them in mail.app). I have watched this behavior for a while and it is consistent. I also verified that I:
- have wireless reconciliation enabled in the Blackberry device
- have sync of deleted message enabled on my BES configuration page (T-Mobile is the provider)
- have mail.app configured to remove messages from the server upon their removal from the inbox
I am at a loss here because I am certain that I am using the same setup as I did under Leopard, but under Snow Leopard, deletions on the Blackberry seem to be ignored.
I toggled a few settings in mail.app, but to not avail.
Anyone have an idea where I should even start to look?
Things I have been considering:
- switch email account to a different service
- switch to IMAP
- not use the POP3 account on Blackberry
The setting in mail.app "delete message upon download" is not an option, as that would never show messages on the Blackberry (I think).
Help, anyone? My goal is to configure this setup so that when I delete a message on the Blackberry, it is removed also from mail.app. Thanks.

I've seen this work on Leopard.
I always thought the deciding factor is whether the setting is enabled for "retain copy on server". Hence, when you connect to a POP3 mailbox from 2 devices (desktop and smartphone), and both devices have this setting enabled, both of them should download the message, and it should be retained on the server.
(I am not concerned about read/unread marks)
If both devices are ALSO enabled to sync deletions (in both directions), the message should disappear from both devices once it was deleted from one of the two.
No?
Delay on download would be too flaky, me thinks.
I can only hypothesize that mail.app in Snow Leopard has a "feature" that ignores the delete on the server that came from the Blackberry.

Similar Messages

  • [E2013] [MailApps] [JS] [Windows]: window.open from a mail app fails in Chrome and Firefox but works in IE

    I develop an Office Mail App which is used in Exchange 2013 On-Premises in my test lab. The mail app is hosted on IIS 8 (Windows Server 2012 R2) in the same LAN and ActiveDirectory domain.
    Opening popup windows from the mail app does only work in IE, not in Chrome and Firefox.
    Here are the details:
    The following server and domain names are changed to hide our internal names. I adjusted the error messages accordingly.
    Exchange 2013 is available at https://e13.some.dom/owa...
    The app content comes from https://server.some.dom/...
    Both the app and exchange server have valid SSL certicates.
    Both server URLs are listed in the popup exception lists of the browsers I use.
    The app generates html with an element which uses onclick to open another item in the same mailbox in a new browser window. Like so:
    <a onclick="window.open('https://e13.some.dom/owa/#viewmodel=ReadMessageItem&ItemID=SomeValidID', '_blank', 'width=600,height=400');">click me</a>
    Clicking that link in Internet Explorer (11.0.9600.17105; Update Versions: 11.0.7) opens a new browser window and shows the message specified with "SomeValidID". All good.
    When I use Chrome (Version 34.0.1847.131 m) the popup browser window opens. I see some progress text "Starting..." and "Almost there..." and then this error:
    something went wrong
    Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.
    X-OWA-Error: ClientError;exMsg=Blocked a frame with origin "https://e13.some.dom" from accessing a cross-origin frame.;file=Error: Blocked a frame with origin "https://e13.some.dom" from accessing a cross-origin frame.    at Error
    (native)    at new _a.$SQ (https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:301915)    at Function._z.$GG.$544 (https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:662161)    at Function.Program.main
    (https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91:663563)    at invokeMain (https://e13.some.dom/owa/?bO=1:549:25)    at https://e13.some.dom/owa/?bO=1:601:15:552
    X-OWA-Version: 15.0.847.32
    X-FEServer: E13
    X-BEServer: null
    Date: 1/2/1601 2:52:00 PM
    Firefox 29.0 pops up the window as well. Shows "Starting..." and "Almost there..." and then this error (some text is german although the mailbox language is set to english, its basically the same error intro text like in Chrome):
    Da hat etwas nicht geklappt.
    Diese Informationen können wir momentan leider nicht abrufen. Bitte versuchen Sie es später noch mal. Kontaktieren Sie bitte Helpdesk, wenn das Problem weiterhin auftritt.
    X-OWA-Error: ClientError;exMsg=Permission denied to access property 'popOutManager';file=_a.$SQ@https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91_z.$GG.$544@https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91Program.main@https://e13.some.dom/owa/prem/15.0.847.32/scripts/boot.0.mouse.js:91invokeMain@https://e13.some.dom/owa/?bO=1
    X-FEServer: E13
    Date: 08.05.2014 11:58:34
    In Firefox I see the popOutManager-access with "permission denied", but the popup window itself was already opened.
    Seems like the opened popup window tries to open another window?
    When I open up a new browser window in Chrome or Firefox manually and paste the URL (https://e13.some.dom/owa/#viewmodel=ReadMessageItem&ItemID=SomeValidID) manually in the address bar the message is shown correctly, so the URL itself does not seem to be
    the problem.
    Double clicking on messages in Chrome and Firefox opens those messages in new windows as well. So it does not seem to be a general popup problem in Chrome and Firefox as well.
    Any ideas how I get the popups from my mail app working in Chrome and Firefox as well?
    SvenC
    -- SvenC

    Hi
    I face the Same issue then I found that at the end of URL we  use "ispopout=1", I just remove this query string variable ant its work fine 
    The important thing is not to stop questioning - Albert Einstein

  • Running Mail.app give spinning ball and freezes computer

    My wife and I have different accounts on an iMac (2.33 GHz Intel Core 2 Duo) running 10.7.4. Her Mail.app has recently stopped working. When she launches Mail.app, the computer freezes and she sees the spinning ball. On my side of the computer, the Mail.app is still working. Any suggestions on how I can get her Mail program running again?
    Thank you.

    Donald and others:
    This problem has been ongoing for about a week now. During that time, my wife has logged in and out of her account several times, and I’ve  rebooted the iMac several times. I've also run fsck, repaired disk permissions, and rebuilt the directory with Diskwarrior. But  Mail.app still isn't working.
    I don’t know how it’s done nowadays, but there used to be plist files that stored preferences for particular apps. Every now and then one of those files would become corrupted,  and when that happened, the performance of the app would be negatively affected. At times,the problem could be solved simply by deleted the right preference files. I bring up this subject because, at lease in some crude sense, Mail.app is behaving as if it had a corrupted plist file.
    Anyway, if someone would tell me what steps I should go through to attempt to solve this problem, I would appreciate it.
    Thank you.

  • Hello The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when  I try t

    hello
    The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when  I try to open it is no use. OS Y 10.10.2 (14C1514)

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Restart the computer. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. Any custom stationery that you created may be lost. Ask for instructions if you want to preserve that data. You can then delete the folder you moved and close the Finder window.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Mail app freezes in white and quits in 5 seconds iphone6 Plus

    mail app freezes in white and quits in 5 seconds after launching it
    tried closing the apps, "reboot" the iPhone6 plus deleted the actual emails from the web, deleted all email accounts on iPhone
    even with no email account, still the same problem.

    we have several intel and ppc mac's here and in our custumers, and they all started by a clean 10.5.x instalation, and progressive single updates to last 10.5.6.
    we did not change anything since yesterday on the machines, and today they all suffer from this issue. even our custumers.

  • Address Book- blank and Mail app preferences- gone! (and iphoto and firefox

    Hello,
    Suddenly, my address book is blank. After starting the computer this morning, the doc came up in its basic original form. Mail app has lost its preferences (when it opens it says "You have no email accounts configured to use Mail..."). Iphoto has also lost all the preferences. The pictures and are there in the computer but they don't appear in iphoto; further, firefox also seems to have lost its preferences.
    I have no idea what to do....
    Any help out there?!
    Thanks
    Omar

    Thank you for the replies.
    It does appear that my contacts are in the metadata folder.
    I deleted the AddressBook-v22.abcddb file and opened Address Book but it was still blank and I still could not add my contacts back. I noticed that the file did rebuild itself. I restarted and still nothing changed.
    There is a second file, AddressBook-v22~.abcddb, I deleted that as well and it did not rebuild itself and had no effect.
    I did make a copy of the complete folder. Any other suggestions or even just insights will win my undying loyalty. I believe this is the first awkward problem I've had with my Mac and I am really uncomfortable not knowing what is going on.
    I can only think of a few things I've done since I last checked Address Book, but I don't see how it would create this problem
    - Deleted my windows partition through bootcamp
    - ran disk permissions for the first time
    - unintentionally had my contacts placed on my ipod (I have no need for them there and it really wasn't what I was trying to do)
    I don't think there was anything else. Oh, yes - I purged my computer of all hidden google related files. I had already done this before but it turned out there were more more more. Geez, if a google related hidden files broke my Address Book - there are larger problems at hand than my contacts. (I did Not have my contacts synced with a google account or do I do any syncing with any mobile devices at all)
    Also, I do not have any AV software.
    Thanks again.

  • Mail.app nonstop checks mailserver and loads CPU, force quit only.

    Hello
    My mail.app turned useless. It does not stop checking my exchange server for mails (little flower weel turns and turns), thereby it cranks up its cpu usage to 80%. I can then only quit mail by force quitting it. Everytime I start mail.app, the same thing happens. I can simply not use it anymore. I already deleted all mail accounts and manually deleted the Mail folder (~/Library/Mail/). As soon as I added the exchange mail account, the problem was back. At the same time that the mail.app started to cause that problem a process called AddressBookSourceSync regularly starts to heat up my cpu (80% and more) . On my iOS devices the exchange account works flawlessly. Does anybody have an idea what could cause this behavior? Thank you very much!
    Best regards,
    Silvan

    Going to use Postbox email client until this gets resolved. I saw a lot of possible solutions on google but none of them worked.
    I don't use mobile me
    I use gmail pop
    so this is just mail.app setup to use gmail's pop servers. i had about 20k email messages in deleted and sent folders that I deleted. just in case it was because I had a large number of emails.
    I tried resetting the sync history.
    **** this is ruining my perfect image I have of apple products.

  • Mail.app too many Ins and no outs

    My Mail.app has never been innocent of odd lapses here and there. As a user with modest demands, I've ignored the less egregious problems. In recent days, my more egregious problems have escalated. My email client downloads messages from the POP server at its own convenience rather than mine, if indeed, it downloads anything at all. I use gmail as my one email account. My messages arrive and are retained in their entirety at the Gmail web site, but most never get downloaded by my Mail.app. My settings are on the money as illustrated by the fact that some messages are downloaded and are stored on my Mail.app In box. My ISP insists they are not a factor in this situation.
    While searching for clues, I entered INBOX.mbox, on a whim, in Finder > File > Find and discovered I had five of them scattered around in my ~/Library. All had different numbers of messages (230-163-94-64-59). I have no idea what I did to fracture one In box into five dissimilar mailboxes. I am not nearly competent to know how to reassemble these five files into the original one.
    It's been my experience that virtually every tweak and click I administer, unfailing makes matters worse. I need sage advice. I should add that Mail > Mailbox > Rebuild has had zero effect — nothing happened at all.

    I'm afraid you're going to have a cow when you read this. After I said I wouldn't do any more stupid things, I did another stupid thing. I read in Gmail help somewhere to be sure I enabled POP, and to click save. What I was reading stated I should Enable POP for all mail (even that's been downloaded).
    That was a big mistake, I got 723 messages.
    I have another revelation to make that will give you a worse fit. I temporarily moved five folders to Trash from ~/Library > Mail because I thought they might be duplicates. Now I don't know if they're duplicates or not — I've included them here:
    Mail copy
    Mail
    Mail copy
    Mail 2
    Mail copy 1
    Outbox.mbox
    [email protected]@mail.gmail.com
    MessageSorting.plist
    Mailboxes
    LSMMap2
    DefaultCounts
    [email protected]
    MessageSorting.plist.backup
    [email protected]@pop.gmail.com
    [email protected]@pop.mailaka.net
    Active.mbox
    Brandy.mbox
    Deleted Messages.mbox
    Outbox.mbox
    online sales.mbox
    Misc..mbox
    Mike Greene.mbox
    Mailaka.mbox
    Family.mbox
    Family
    eBay.mbox
    MessageUidsAlreadyDownloaded
    INBOX.mbox
    Deleted Messages.mbox
    [email protected]@pop.gmail.com
    [email protected]@pop.mailaka.net
    MessageSorting.plist.backup
    MessageSorting.plist
    Mailboxes
    INBOX.mbox
    INBOX.mbox
    INBOX.mbox
    Sent Messages.mbox
    INBOX.mbox
    Susan.mbox
    Kath.mbox
    Matt.mbox
    Ed.mbox
    Lisa.mbox
    Mailboxes
    [email protected]@pop.gmail.com
    [email protected]@pop.mailaka.net
    MessageSorting.plist.backup
    MessageSorting.plist
    Deleted Messages.mbox
    Sent Messages.mbox
    MessageUidsAlreadyDownloaded
    INBOX.mbox
    Drafts.mbox
    Sent Messages.mbox
    Deleted Messages.mbox
    MessageUidsAlreadyDownloaded
    INBOX.mbox
    Drafts.mbox
    Outbox.mbox
    MessageUidsAlreadyDownloaded
    INBOX.mbox
    Deleted Messages.mbox
    When I converted them to List and collapsed the expanded folders, there were reams of stuff I never saw before.
    Following is what you specifically requested: MessageSorting.plist.backup
    MessageSorting.plist
    Mailboxes
    [email protected]@pop.gmail.com
    Outbox.mbox
    Deleted Messages.mbox
    MessageUidsAlreadyDownloaded
    Deleted Messages.mbox
    Drafts.mbox
    INBOX.mbox
    Sent Messages.mbox.
    I noticed another folder: [email protected]@pop.gmail.com
    [email protected]@mail.gmail.com
    [email protected]@pop.secureserver.net
    MessageSorting.plist
    Mail copy
    [email protected]
    MessageSorting.plist.backup
    Mailboxes
    DefaultCounts
    LSMMap2
    Deleted Messages.mbox
    INBOX.mbox
    Sent Messages.mbox
    MessageUidsAlreadyDownloaded
    Drafts.mbox
    MessageSorting.plist
    LSMMap2
    MessageSorting.plist.backup
    Mailboxes
    DefaultCounts
    [email protected]@mail.gmail.com
    [email protected]@mail.piquenique.com
    [email protected]@pop.gmail.com
    [email protected]
    [email protected]
    INBOX.mbox
    MessageUidsAlreadyDownloaded
    Drafts.mbox
    Deleted Messages.mbox
    Sent Messages.mbox
    INBOX.mbox
    INBOX.mbox
    Deleted Messages.mbox
    Family
    Active.mbox
    Mike Greene.mbox
    Mailaka.mbox
    Outbox.mbox
    Brandy.mbox
    eBay.mbox
    online sales.mbox
    Misc..mbox
    Family.mbox
    Susan.mbox
    Kath.mbox
    Lisa.mbox
    Ed.mbox
    Matt.mbox
    I'll understand if you want to wash your hands of this and bid me goodbye. I think a lot of my problem arises when my machine automatically makes duplicates without advising me of this.

  • Mail.app using 80% CPU and won't quit - any ideas?

    Hi, I'll try and cut a short story shorter...
    I tried to begin using Mail.app last night instead of Entourage and Thunderbird just to see what it was like. Having never used mail.app before, I use the bundled import wizard to retrieve the settings from the Entourage account (POP, wifes ISP account) which seemed to work ok. I didn't test at this point as I have another account (POP again, my gMail) stored on Thunderbird which I also wanted to import.
    To import the mailboxs from Thunderbird I copied the relevant folders from the ~\Library...\myprofile\... folder to the desktop and added the .mbox extension. Then used the import wizard 'other' option to bring them in.
    All seemed to go ok. I recreated my 'other' account manually and sent/received some test mails etc. then marked everyting in all mailboxes as read.
    At this point the laptop went very slow so I checked Activity Viewer - this showed Mail.app hovering between 70% - 80%. I thought this was a bit odd so I tried to Quit Mail, but it just hung. I then force quit and the CPU calms down.
    I opened Mail again and it was ok for about 3 minutes until I try to view various mailboxes. Mail is still responsive but the mailboxes are empty! I use the rebuild function and they show the messages again, unless I look at a different one and then go back to the rebuilt mailbox - it's empty again.
    Then the CPU/won't quit happened again. CPU is up at the same levels, Mail.app has 7 threads. I thought there may be some indexing going on so I went to bed. I got up this morning to find the G4 fans going crazy and CPU still consuming the CPU?
    Any ideas?
    I'm thinking I may trash both accounts and rebuild from scratch tonight.

    Hi Ian.
    Aside from whatever the problem is here (which I don't really know), you shouldn't add an .mbox extension to mbox files in order to import them into Mail. Mail uses that extension for something else. Also, you'd get better results using Eudora Mailbox Cleaner to do the conversion.

  • IPhone 5 (16GB) iOS 7.0.4 Mail App size is 1GB and continuously increasing. How to reduce the size of the Mail App?

    Hi,
    I am using an iPhone 5 (16GB) iOS 7.0.4.
    Currently the size of the mail app is 1GB and is continously increasing, even though the advanced settings in the mail account have been set as following:
    MOVE DISCARDED MESSAGES INTO:
    Deleted Mailbox
    DELETED MESSAGES:
    Remove: After one day
    INCOMING SETTINGS:
    Delete from Server: When removed from Inbox
    The problem that I am facing is that only a few emails reside on my iPhone as I keep deleting emails, which are also deleted from the server automatically because of the settings as above, which is perfectly fine. The emails are deleted from the Mail app and only a very few of them are visible which I have not deleted as yet, and all is fine till here. The problem is that the size of the Mail app is more than 1GB and is continously increasing, when i check the size of the Mail app in the Settings > General > Usage section.
    When I search for an email that has previously been deleted from the search feature by swiping down in the main page, it still comes up in the search, and upon clicking the searched email, it takes me into the Mail app, however, the mail is not there. I have tried searching for emails which were deleted weeks ago, and they still come up in the search feature, however, they DO NOT open in the Mail app when i click them within the search feature in the main page.
    Up until a couple of months ago, the size of the Mail app was about 5.2GB and at this point I had no space on my 16GB iPhone 5, therefore I resetted my phone two months ago, and after a complete reset of the iPhone 5, the size of the Mail app went back to 0.3KB (like it was brand new out-of the box); however, within a matter of two months the size of the Mail app has now exceeded 1GB and is continously increasing, as I receive alot of emails which is why I delete them on daily basis and even delete them from the Trash folder (mailbox).
    I have read alot of blogs and even checked with other friends using similar settings on the same model, however, I just cant seem to figure this out. I would really appreciate if someone can help me with this issue as I dont want to have to reset it again after another 2-3 months.
    There are practically only 14-15 emails on my Mail app with not alot of KBs for these emails, and the trash folder is also empty, but the size of the Mail app is still not reducing. Please help!!
    Regards,
    Shoaib Malik

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Also consider deleting and reinstalling the Mail Account in question.

  • All Mail.app messages (POP) gone and window will not open in new LION

    I have upgraded to Lion but now all my email messages seem to have disappeared. I have tried installing Postbox and using that. It works fine but Postbox cannot seem to locate my old email messages either.
    I'd prefer to use the Mail.app but cannot right now. Any clues as to what might be causing this?
    Thanks!!

    You’re welcome.
    Look for additional information that may be available in the form of error messages written to the Console:
    1. Open /Applications/Utilities/Console.
    2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that Console displays the contents of both system.log and console.log.
    3. Reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result.
    <hr>
    Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
    /Library/InputManagers/
    /Library/Mail/Bundles/
    ~/Library/InputManagers/
    ~/Library/Mail/Bundles/
    To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
    ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

  • Mail.APP has been deleted and don't know how to get it back ?

    Please forgive my stupidity, But I have deleted my Mail app I don't know how but all that appears now
    in it's place on the dock is a black piece of paper with a ruler and stuff.
    Could somebody please help me out and tell how to get it back

    Insert the OSX installation Disk, and instead of proceeding to install, choose the Optional Installs -- Mail is one that can separately installed this way.
    If the Install Disk has an earlier version of OSX than you have currently arrived at by updates, then you will have to download the Combo Update for 10.5.7, and install that over the existing OSX after having installed the Mail app. This is combo is 729 MB, and is not the standalone delta update, btw.
    Ernie

  • Mail.app using multiple identities and outgoing servers, how to map them?

    Hi all,
    I am using mail account and my main account (gmail) is defined as IMAP on it.
    In my gmail settings, all my other mails are forwarded to this e-mail account so I don't need to define my other mails to get those mails (since I get them from my mail account).
    When sending an e-mail or replying, I want to use the same identity that the mail was sent to and the same outgoing mail server.
    For now, I successfully defined my different identities in my main account (i.e., I added them in the e-mail address field with comma separated values), and I also managed to define different outgoing servers (from account -> outgoing servers). However, my problem is that, I cannot link an identity to an outgoing server. They are all linked to my default mail's outgoing server by default and I have to manually select them every time I sent an e-mail. However what I want is the following:
    Let's say that I have 2 identities: id1 and id2 and two outgoing server os1 and os2.
    I want the mail.app to select os1 whenever I selected id1 and os2 whenever I select id2.
    I want the mail.app to select os2 whenever it decides to use id2 (because the e-mail was sent to id2) and the same for the other os-id pair.
    Is this possible? All help is greatly appreciated. Thanks in advance, and do ask if you need more information.
    Regards,

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Also consider deleting and reinstalling the Mail Account in question.

  • Mail app strange behavior, default and all mailboxes not accessible

    hello community! i have had this problem from months now and maybe years...a couple of days ago i bought my 5S and i thought that this should have pushed me to fix this and not just work around it...
    so here's the deal MAIL APP, iPhone 5S 7.0.3
    i have mail app setup with 5 gmail accounts, which receive and send email just fine, the problem comes when i need to check emails...here's what happens.
    i open the mail app
    SOMETIMES i see on the bottom "downloading 250 email" (50 last emails for 5 accounts).
    IF im fast enough...i would be able to enter in my default account or "all mailboxes", if i wait like a couple of seconds, boom! all mailboxes and default account become unaccessibe (GREY, like in the screenshot)...and they stay like this
    when i manage to access the "all mailboxes", i see a bunch of NO SENDER emails that appear and disappear after a few seconds, all dated 1.1.01 and the email conversations with more than 1 email, i would be able to tap it, it would get evidenced but it wouldn't open the email conversation, this happens sometimes, sometimes it opens...
    i have tried searching this issue, but nothing seemed as this, only found some random use with the no sender or duplicate emails, not my case...no sender emails appear and go away in manner of 2 seconds.
    workoround: Gmail app works just fine, but i would love to use the native mail app
    screenshot attached, i hope someone can help here. I ave covered the rest of the email accounts, but i assure you that they are black and not grey like the top ones.

    and so again happened, was sending an email from my default account and boom!!
    however, the email was sent, then this happened. this time the emails are from the 70's, probably someone that decided to pull my leg seein me in the future...lol

  • Mail App not updating date and time

    Hey guys,
    Has anyone else has this problem: My Mail app isn't updating the date and time at the bottom of my screen. (In between, the refresh button on the left and the new draft button on the right) Not sure how to fix it...
    Thanks in advance!

    Click on View on the top menu, click on Columns, and then click on "Date Received" to select it. Once it is checked, the Date and Time will display.
    Cheers,
    GB

Maybe you are looking for

  • User Exit for T.Code : F110 - APP

    Hi Guru's, My Company is developing the interface to 3rd party system. For that i have to send the all payment data to customized table. From custom table to 3rd party system. So Please Suggest the Suitable User Exit for F110 - Automatic payment Prog

  • HT5246 Just got the update.  Nothing came up.  Does this mean I don't have it?

    I've been reading about the Java Malware for the past week.  I heard Apple had released an update for Java, but I never got one when I clicked on Software Update.  A friend suggested that I may not have Java on my MBP.  This morning I finally got a n

  • I discover this on my P4

    i had an AMD system. now i have a P4 with HT. at hardware list (properties) i see 2 P4 processors. is that hyper treading? also at task manager (ctrl+alt+del) at the tab performance i see 2 cpu health meters. is that correct??

  • How to dynamically disable interactive report filed in master detail page

    I am using APEX 4.0 & very new to APEX. I am not able to make disable a filed in detail region (which is a interactive report) of a master detail Page. I.e. want to disable field of a row based on value of another field for same record, just like set

  • Quicktime on the net

    My quicktime works perfectly for the file existing in my hard disk, but when I open a webpage wher I should see a quicktime movie (like on apple.com) my Quicktime logo is "tranparent" and contain a question mark, tough I cannot see the movie. If you