Mail app like in phone/ipodtouch

is there any mail app like in ipodtouch/iphone?
i tried to configure mail in messages but it shows quite older mails..i dont knowwht to do..
in iphone mail app, it gives option of gmail,hotmail,aol,yahoo etc and we just need to enter login details and then it'll remember forever..and it shows mails as in gmail.com [inbox/starred/draft etc.]
any such app?

i'm using nokia 5800, firmware V20.0.012
I'm able to access my gmail well from my ipodtouch and online from pc too.
emails i got in mail folder in msgs in my 5800 are yrs older i think..

Similar Messages

  • My mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do didi any has same issue?

    my mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting>general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do did any has same issue? if i do an complete phone restore what will hapend ?

    You can call Verizon to replace it or go to an applestore to replace it since it won't even power on with multiple chargers.

  • Yesterday, when I brought my laptop back from sleep, I tried to check my e-mail with the Mail app like I always do. But there was the lightning bolt sign next to the inbox, and the pop-up asked me to input my password, which didn't work. It says mail.mac.

    Yesterday, when I brought my laptop back from sleep, I tried to check my e-mail with the Mail app like I always do. But there was the lightning bolt sign next to the inbox, and the pop-up asked me to input my password, which didn't work. It says mail.mac.com has rejected my password. The password is correct (I'm able to check my e-mail through my browser at me.com), but for some reason Mail keeps on rejecting it. I usually don't have to input my password at all in Mail. Any clue how to fix this? I haven't changed anything at all on my laptop.

    I did change my apple ID password though...

  • Configure Mavericks Mail app like the iOS Mail

    Is there a way to configure Mavericks Mail app like the iOS Mail so that mail messages are not automatically downloaded, and they will only download when you click on the titles on the list of messages on the left?

    Hello yonole,
    Thanks for using Apple Support Communities.
    The steps below will disable the automatic checking of new email for your email account:  Please note that even though the article title is for Mountain Lion, the same applies to Mavericks.
    You can set Mail so that it doesn’t automatically retrieve messages from an account—for example, if you have an account you use only occasionally or you don’t want to check a personal account while you’re at work.
    Choose Mail > Preferences, and then click Accounts.
    Select an account, and then click Advanced.
    Deselect the “Include when automatically checking for new messages” checkbox.
    When you exclude an account from automatic checking, you must manually check the account for new messages. To do so, click the Get Mail icon in the Mail toolbar.
    Internet Message Access Protocol (IMAP) accounts are automatically synced with the mail server (and so automatically check for new messages). To keep an IMAP account from being synced, take it offline.
    Mail (Mountain Lion): Exclude accounts from automatic retrieval
    http://support.apple.com/kb/PH11755
    Take care,
    Alex H.

  • Mail: app like Dockstar

        Hey, is there an app like DockStar to put an indicator, in the manu bar, for new emails?

    i'm using nokia 5800, firmware V20.0.012
    I'm able to access my gmail well from my ipodtouch and online from pc too.
    emails i got in mail folder in msgs in my 5800 are yrs older i think..

  • Is there a way of reading multiple accounts mail together like mobile phones?

    I've just installed thunder bird, and set up my multiple accounts ,is there away to set up thunder bird or is there a plug in to view all new mail simultaneously.showing the mail as they are received and colour coding them to the account they was received from. just like my android mobile phone .

    View menu (alt+V) > folders > unified.

  • HT2500 How to archive mail messages outside the mail app, like in an external drive?

    can you please explain how to archive messages in an external drive,? Thank you

    Hello, If you have 2 Macs with Firewire, bot the 10.3 one into FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    Then use Mail on the other one to Import.
    If that isn't possible then I think this is the same for 10.3 as 10.4 & up...
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist
    As an aside, what is best way to delete all private data a Mac Cube G4 in order to sell it.
    Best is to erase the whole disk with zero one pass then reinstall.

  • Windows Phone and Windows 8 Mail App not sending email from Reply/Forward

    I have recently upgraded from Windows 8 to 8.1. After a successful upgrade I configured the Windows 8 Mail app to also sync with Exchange (2010 in house server). On my Windows Phone (Nokia Lumia 800) I have the same account configured.
    This resulted in the problem that the Mail App and the phone do not want to send any emails that have been created by reply or forward.
    The phone gives the following error:
    "We weren't able to send this message, so we've put it in your Drafts folder. Before you try sending it again, you can check to see if the address is correct and that no attachments are too large."
    The Mail App give the following error:
    "There's a problem with sending messages from [email protected] at the moment. Check with your provider for more info."
    If I create a new email there is no problem.
    I have searched all over the internet for a solution to this problem, but could not find somebody with exactly the same problem.

    I have exactly the same problem, but unfortunately no solution either... I'll be watching this thread, or post a solution if I find one...

  • Mail with iPhone and mail app

    guys, so my mail app is acting up... it takes forever to receive a new message at times, even tho it pops up on my phone right away...also, when i delete it from the mail app, the email, it never shows deleted in my iPhone... so then i have to go in and delete it again on my iPhone... gmail works great but for some reason i'm having issues with hotmail..
    i also tried deleting the account and then recreating it to no avail, i don't know...  i just need it to start receiving messages faster cuz i have it set to automatically which should pop up and notify right away whenever i have a new email right? but my phone always gets it first and then it gets to the mail app like 5 minutes later... and of course, finally, when i delete that email on the mail app, why does it sync on gmail and show it deleted on my iPhone but not with my hotmail/outlook account..
    and finally, why the heck after buying a new macbook do i only have the option to setup a phone call... wheres' the chat support? sometimes it shows and sometimes i can't find it for the life of me on here? what's up with that?

    This sounds like old fashioned mailbox locking - only one device can log in to the same POP3 mailbox at any time. If you are downloading mail on the iPhone, the iPad will have to wait for the phone to finish before it is allowed to access the mailbox, hence the error message.
    Sit the devices side by side and try to check for mail on both at the same time, this might reproduce the problem. If it does, then you'll need to switch to using IMAP, which does not have this issue.

  • Can not view my icloud mail messages on my phone

    I am not able to look at my mail within the icloud mail.  Any suggestions

    Not sure what you mean by "within iCloud mail" but if you can't view your iCloud mail inside the Mail app on your phone, go to Settings>iCloud, turn Mail off, then after a few seconds turn Mail back on again.

  • Mail.app not downloading email from one person

    Hi
    I am using Mail.app (v2.1) on 10.4.8 with a mac.com email address setup and am having problem receiving emails from just one person - that's right only one sender.
    What happens is, the person sends the email and it arrives at the webmail interface (i.e. I can view the email using Safari) but the emails are not downloading to Mail.app like all others i receive, I have to login to .Mac webmail to read the emails this persons is sending to me.
    At one stage while trying to solve this I had a "Rule" which would play a certain sound when email from this person arrives and Mail.app would play this sound but still didn't download the email.
    I have tried synchronising the account and rebuilding the mailbox but am still not able to get Mail.app to download these emails.
    Thanks for any help.
    Gary
    PowerBook G4 1.25GHz FW800   Mac OS X (10.4.8)  

    I have had the same problem for over a year. Certian senders using my .MAC account get stuck on the .mac server. After a few days, a few of the emails may get through. Other emails to my .mac account will get through.
    For me, this started over a year ago when there was an OS update. I noticed it started on this Ibook then continued to all other MACs as the updates where made. I too have rebuilt the mailbox and synced the accounts.
    Where you able to fix your problem?
    Ibook G4 800 Mhz   Mac OS X (10.4.8)   Mail 2.4.1

  • Mail.app forward problem

    Hello,
    i am experiencing a problem with mail.app
    I have installed two email pop account which are working normally.
    The problem is that. When trying to forward messages with ppictures or attachments (normal size) the messages stuck in outbox, the activity panel shows "done 100%" constantly but the messages is not being send. After a while you an option window to select other smtp server but the problem remains the same. If you try to send any message by "new mail" option then message is being send normally.
    This is weird and annoying and i can not resolve it.
    System has all the latest updates (10.6.2) and is a brand new iMac.
    Please kindly advice.
    Thank you for your attention.
    Message was edited by: Freebulkers

    Freebulkers wrote:
    Will this affect messages that i have for my accounts??
    No
    Will this erase them??
    No
    Will this action turn mail.app like starting for first time?
    No
    Should i backup anything??
    If you have a backup, use it first. Otherwise the answer is that you should always have a backup
    All you might lose is your account server/logins, any personal settings for the tool bar, color settings etc. It won't affect your messages. I've had to do this before and it's a typical method because the plist is the expected casualty point when something like this happens. The next time you run MAIL it will build a fresh plist and then you can make any specific changes that are needed. In terms of troubleshooting, it is one of the more risk free methods around.
    If you want to be safe, simply move that file to the desktop long enough to test.
    • If it doesn't help or if you think it makes something worse, trash the temporary replacement and then put the original back.
    • If it fixes the issue, then you can trash it.
    If you are at all reluctant, don't do it.

  • Mail app not working suddenly. Won't accept my password.

    Yesterday, when I brought my laptop back from sleep, I tried to check my e-mail with the Mail app like I always do. But there was the lightning bolt sign next to the inbox, and the pop-up asked me to input my password, which didn't work. It says mail.mac.com has rejected my password. The password is correct (I'm able to check my e-mail through my browser at me.com), but for some reason Mail keeps on rejecting it. I usually don't have to input my password at all in Mail. Any clue how to fix this? I haven't changed anything at all on my laptop. I use Yahoo DSL.
    Thanks!

    Greetings,
    You need to complete your profile so we know exactly what you're running, and keep it -up-to-date at all times. There are different solutions for problems depending on which version of Mac OS X and the specific application that you're running. Using the wrong one could lead to disaster for you.
    It's possible that your Keychain entry for the email account has been corrupted. To test for that and fix it: you need to:
    Quit Mail.
    Open Keychain Access and select the Passwords section.
    Scroll through the list until your find the entry for the password for the email account and delete it; then quit Keychain Access.
    Restart Mail, enter the password when prompted and check the box to save it in the Keychain. With any luck it will accept it and your problem will be solved.

  • Using hotmail on the mail app

    Does any one know how to set up hotmail on the mail app like what the in an out going "host name" would be
    if you know how to set it up please let me know

    does not seem like iPod touch support industry standards like HTTP mail account type. iPod touch only supports POP, IMAP and Exchange.
    Five options to get hotmail to work for you:
    1. Upgrade your hotmail to Hotmail Plus.
    Note this will cost you about $20 per year. The you can get the POP details and use this.
    2. With IzyMail, you can access Hotmail
    http://email.about.com/od/iphonemail/qt/etgethotmail.htm
    3. Use Safari and read your hotmail e-mail.
    4. Forward all your hotmail to gmail and use gmail.
    5. ask someone from apple to add support for HTTP.

  • Need Applescript to apply stationery in mail.app

    Hi all,
    I need help to make an applescript that will apply a selected stationery to a new message window that is already open in mail.app. Can anyone please assist? Thanks a ton!
    Ultimately, I have a filemaker db that is going to have a button scripted to open a new message to a contact but I can't figure out how to then add the stationery to the message...

    I know it sounds very similar, but if you want Gmail to function in Mail.app like it does in Gmail, where you archive most but not all of your mail, there are some unique settings.
    Gmail's recommended settings for Mail.app:
    (note: for the rest of this message, if Gmail is a link, that's because I can't figure out how to not make hard-brackets not evoke some kind of special message board code.)
    Trash:
    Move deleted messages to the Trash mailbox > do NOT check
    Store deleted messages on the server > do NOT check
    * Do NOT save deleted messages on the server. Messages that are deleted from an IMAP folder (except for those in [Gmail]/Spam or [Gmail]/Trash) only have that label removed and still exist in All Mail. Hence, your client doesn't need to store an extra copy of a deleted message.
    * Do NOT save deleted messages to your [Gmail]/Trash folder because this will delete a message in all folders.
    * Do NOT save deleted messages to your [Gmail]/All Mail folder as some clients will try to empty this folder and ultimately fail. This can lead to delayed mail access or excessive battery consumption on a mobile device.
    I can't try your script just now (at work), but I will try it once I get home. It looks like it should work in the most basic scenario.
    If I wanted to filter the messages to go into the account specific Trash mailbox, is that a trivial process? Could I:
    tell application "Mail"
    set theMessages to (get selection)
    set theAccount to (get account of theMessages)
    move theMessages to mailbox "Trash" of "[Gmail]" of account "theAccount"
    end tell
    That's just my guess at what the Applescript might look like.
    Thanks for all your help.

Maybe you are looking for