Mail.app: 'Remove Address' does NOT Remove Address

Hello,
I am using OS X (10.9.5) running Mail.app (7.3 (1878.6)).
When I reply-all to an email with multiple recipients in the CC line, if I right-click and 'Remove Address', it removes the address from the CC: line, and appears that the message will not go to this recipient.
When I check my 'Sent' folder for this outbound message, I can see that all recipients that I removed by right-click > 'Remove Address' actually received the message that was not addressed to them.
I can readily duplicate this failure with test email addresses.
This is a critical defect.  Mail should not be delivered to unexpected recipients.  Mail should SPECIFICALLY not be delivered to recipients that have been explicitly removed from any of the address fields.  If the Remove Address feature does not work, perhaps remove it from the right-click options.
Please fix this.
I am aware of a workaround to use the 'Delete' key to remove addresses.  I will use that in the future.
This violates the principle of least surprise in one of the worst possible ways.
Similar post (Why won't Mail remove a recipient's address when I manually do it?)

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Mail/Provide Mail Feedback

Similar Messages

  • Mail.app and IMAP does not change message in server

    Hello all...
    I'm having a strange problem with Mail.app.. I have a IMAP server that uses pine-imapd. I can login and read messages, but anything I do with the messages to not change the message status on the server... If I read a new message, it remains NEW on server, if I delete, it DO NOT delete form server, and so on.. There are cases that I keep receiving the same message over and over again, but actually there's only one message on the server... I used to use Linux with Evolution and everything works just fine, but with Mail.app on Leopard, I have this issue.. Anyone experienced the same thing and have solved it?
    THanks
    Carlos Barros

    Hello Neithan.
    Assuming Preferences > Mailbox Behaviors > Move deleted messages to the Trash is ON, does having Store deleted messages on the server ON or OFF make a difference?
    Does the problem persist if you take the account offline, then back online (e.g. by means of Mailbox > Go Offline/Online)?
    Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
    /Library/InputManagers/
    /Library/Mail/Bundles/
    ~/Library/InputManagers/
    ~/Library/Mail/Bundles/
    To make accurately reporting that information easier, open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
    ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

  • My mail app is frozen does not respoind to touch screen

    suddenly my Mail App is frozen. It does not respond to the touch screen at all.

    Try restarting the device and see if that works. If you find that there was no help from that use these steps (located in Apple article HT5137):
    Follow these steps to force an app to close:
    From the Home screen, click the Home button twice.
    Tap and hold on the app.
    When it starts to jiggle, tap the red - icon to close it.
    Double-click the Home button and try opening the app aga

  • When I create a new mailbox in mail.app, the mailbox does not appear in the list of mailboxes

    I am trying to create a new mailbox in mail.app, but it never appears in the list of mailboxes. This USED TO WORK.

    Without seeing anything of what you did there is not much to go on except to say that when you create a classic tween you use a library-based object and it has to exist at both ends of the tween.  When motion guides come into play you usually have to fiddle around when making the link between the object and the motion guide to get the object to lock to it.

  • Mail.app 4.1 does not work with 10.6.1 after restore from time machine

    After I restored my complete system from time machine backup using the original snow leopard install disc. My Mail.app won't start up anymore. It shows me the message:
    "You can't use this version of Mail with this version of Mac OS X"
    "You have Mail version 4.1 (1076/1075.2). It can't be used Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button"
    I don't understand the error message as mail 4.1 was installed as part of Mac OS X 10.6.1?
    Detailed event log:
    2009-11-03 06:00 AM: Backup succeeded successfully via time machine on my time capsule
    2009-11-03 11:00 AM: Original laptop was broken. (Screen didn't work anymore)
    2009-11-03 03:00 PM: Got a temporary new Macbook Pro from my System Administrator.
    2009-11-03 09:00 PM: Successfully restored complete system on new temporary macbook using time machine with data of my time capsule. Everything looked the same (login image, installed applications, etc...). But when I tried to start Mail.app it gave me the above message.
    Can someone help me with this???
    Kind Regards,
    Niels

    I've seen two possible solutions to this:
    1. Easier, but less likely to work - try to start mail from the Finder, rather than the Dock. If it works, replace the Dock Mail with the Finder one.
    2. More probably the solution: download and reinstall the 10.6.1 combo update. I know you shouldn't need to after a TM restore but ...

  • New to Mac....Help. Mail app on ~Dock does not open

    I have had my mac for over a year and mail has been great. I have a mac desktop g5. Clicking mail on the dock and I can read my messages easily.
    Now i have to go to .mac to get my mail. Its all a blank screen and these rainbow wheel is driving me nuts. Please help ....anyone? I have tried synching but it doesnt help at all. Am I doomed.

    I have had my mac for over a year and mail has been
    great. I have a mac desktop g5. Clicking mail on the
    dock and I can read my messages easily.
    Now i have to go to .mac to get my mail. Its all a
    blank screen and these rainbow wheel is driving me
    nuts. Please help ....anyone? I have tried synching
    but it doesnt help at all. Am I doomed.
    I assume you created a .mac account in Mail. You might want to try deleting the account and recreating it. Assuming you Internet connection is good, it sounds like Mail doesn't understand where to get mail.
    Jim

  • When ipad connected to windows computer for sync I cannot install or remove an app. Screen does not react. Also lost my app store app from the ipad screen

    when ipad connected to windows computer for sync I cannot install or remove an app. Screen does not react. Also lost my app store app from the ipad screen. IPad is ipad 2 and op system is 8.1.1. Just tried full restore and still the situation is the same.

    For the missing App Store issue, if you swiped fro screen to screen to look in other folders and didn't find it, and did a spotlight search to see which folder it is in and had no success with that, Check Settings>General>Restrictions and make sure that you didn't disable it.
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.
    For the syncing issue, which screen does not react, the computer and iTunes or the iPad?

  • The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it.  After looking in the app store it does not appear that said application is available for re-downloading.

    The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it.  After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
    Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.

    I'll back up Csound on the MacKeeper thing.  In fact, I actually wrote the following about it:
    http://www.reedcorner.net/news.php/?p=245
    Remove is ASAP.  Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it.  Try this:
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple.  However you have gotten it, your best bet is removing it.  See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
    http://www.reedcorner.net/guides/macvirus
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

  • Email settings Exchange mail on Nokia N8 does not ...

    Email settings Exchange mail on Nokia N8 does not WORK I´ll go crazy ! (hotmail gmail, yahoo)
    Hello
    I just got my nokia n8
    it works fine.
    so proud to be one of the first to have it =)
    But now then i want to set up my hotmail windows live email accont in the phone and try using exchange email it does not work.
    I can get it to have a inbox.
    But no email uccors
    and when i try to send an email it will not go.
    It stays in the outgoing email folder.
    What shall i do?
    I have Tele2 comviq.
    I have read over the internet that tele2 has problems with email in nokia n8
    Can i solve this without have to change operator ?
    please let me know if you have a resoluson for me.
    thanks
    im using @hotmail.se
    what shall it say in Domain ?
    I have tried writing the server name but it does not work.
    There should have been a wizard of some sort that you could download from ovi as an app.
    that would set the email accont up for you..
    this exsist to N97
    but not the newest phone Nokia n8
    WHY !!!!!!!!!!!!!!!
    Anyone that knows ????
    Regards.
    Sofie Sweden
    Attachments:
    4562844780_f92b51796e.jpg ‏86 KB

    To setup mail client to access Windows Live Hotmail 
    account, use the following Hotmail POP3 and SMTP configuration settings:
    Incoming Server (POP3 Server): pop3.live.com
    Incoming Server POP Port: 995
    Incoming Server POP SSL Encryption: Yes (On or Required)
    Outgoing Server (SMTP Server): smtp.live.com
    Outgoing Server SMTP Port: 25
    Outgoing Server Authentication: Yes (On – Use POP username and password or Hotmail credentials)
    Outgoing Server TLS or SSL Secure Encrypted Connection: Yes (On or Required)
    Tip (by J): Outgoing Server of Hotmail also supports port 587, useful for people who encounters error for STMP due to ISP blockage or any other reason.
    User Name: Windows Live ID (e.g. [email protected])
    Password: password used to sign in to Hotmail or Windows Live service
    Note: “Log on using Secure Password Authentication  (SPA)” check box in Outlook, Outlook Express or Windows Live Mail 
    should not be selected.
    Nokia N80
    Nokia N82
    Nokia N97
    Nokia N8 Dark Gray- RM-596

  • TS3276 my mail will not allow me to log out and mail on dock will not open it says try again and quit mail  i do but does not work

    can't get mail on dock to open when trying log off says quit mail and try again tried dozens of times quit mail try again but does not work

    Pierre222,
    Unfortunately you are not providing us with any useful information. We need to know what app you are using to email at the very least. However what I'd suggest you do is call AppleCare, you have 90 days of free telephone support (the number is in your owners manual) and they will be happy to assist you. They're open M-Saturday so you will need to wait until tomorrow.
    BTW if you have not been exposed to these please bookmark them and begin using them. You may find your answer in one of the videos.
    Switch 101, Mac 101, Find Out How Video tutorials & List of Useful URLs for switchers

  • I have an iPhone 4 and everytime i try to go on safari, mail, or iTunes it does not work without wifi

    I have an iPhone 4 and everytime i try to go on safari, mail, or iTunes it does not work without wifi

    if your youtube was already running then I would exit out of the application completely by double clicking your home button and then search for your youtube app on the row that will show below and then press and hold down the youtube icon and then click the "X" to exit out of it. Afterwards try to reopen youtube and play a video to see if it works

  • ERROR: Cannot start mail services, configuration directory does not exist

    I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
    Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
    Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
    I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
    Is this something to worry about?

    Hi Joel,
    You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
    Jeff

  • I changed my AppleID/Password and now am locked out of iCloud. iCloud says maximum number of free accounts have been activated. tried Settings, Mail etc but iCloud does not appear. I was going to delete it and start again.

    Had to change Apple ID/Password recently now cannot access iCloud. In settings when tapping iC, log in screen appears with old ID and request for (old) password.
    In Settings  Mail, Contacts etc iCloud does not appear. I was going to delete account.
    Trying new ID/Password message appears "maximum no. of free accounts have been activated".
    Using old ID/Password message apperas "you can,t sign in because account was disabled for security reasons ......reset password at iforgot.apple.com which i did.
    Can anybody help please??

    Hi,
    I tried to log in to iCloud but a message appears telling me I "can't sign in because my account was disabled for security reasons....reset password at iforgot.apple.com". I don't know why this happened.
    I reset both my Apple ID and password.
    When I tap Settings iCloud is listed on the left side between General and Mail, Contacts etc.
    Tapping iCloud brings up a log in screen for iCloud which shows my old Apple ID and requests the password. If I put the password in I get the message as above.
    If I use the new Apple ID/Password I get the message "the maximum number of free accounts have been activated....
    In settings there is no option to "Delete Account"
    Any suggestions??

  • In Apple mail, the attachment symbol does not appear in the list of sent items

    In Apple mail, the attachment symbol does not appear in the list of sent items. So you cannot sort sent emails based on whether or not they have an attachment. Is there a way to fix this?

    I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

  • On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Anyone got a fix?

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

  • App binary file does not correspond to folios in Adobe Viewer

    I created an app in several different language versions, all connected to the same multi-layer/lingual InDesign files. In Adobe Viewer they look and work fine, however Apple just approved the English language binary update and the app is entirely in Spanish. I tried re-exporting the .ipa file from a previous version (one that was already published in English albeit with bugs- hence the update submission)  and this too shows in Spanish. I tried re-saving all InDesign files with the English language layer turned on and exporting a new version, but once again it shows in Spanish. My client is understandibly very upset as the app is time-sensitive and if we have to wait another week for Apple approval we are in big trouble.
    What is going on and how can I fix it?

    Ok, I'll try it, but I don't understand why this happened in the first place. The English app was ready to be exported before the Spanish version had been sent to "create app," and so in my understanding the exported file should have coincided with what I see in the viewer.
    Melanie De Jesus
    Mobile: +39 392 9932197
    SAY DESIGN s.a.s.
    Il giorno 21/lug/2013, alle ore 16:10, Neil Enns - Adobe <[email protected]> ha scritto:
    Re: App binary file does not correspond to folios in Adobe Viewer
    created by Neil Enns - Adobe in Digital Publishing Suite - View the full discussion
    Are you making a Single Edition application? If so simply changing the layer state and redownloading the application isn't enough. You have to go to the Create App menu item again and go through the App Builder wizard for it to pick up the changed files.
    Neil
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5524671#5524671
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5524671#5524671
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5524671#5524671. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • Confirmation of file process

    Hi, There is a pdf file which we should pick up from a source FTP and drop into the target FTP. Requirement: After the PDF is completely written to the target FTP, we have to deliver data from SAP R/3 also to the target FTP server. We have chosen pro

  • Release Strategy vs. Delete (Purchase Requisition)

    When my Purchase Requisition hasn't got a Release Strategy I can mark it as deleted using BapiDelete from the Purchase Requisition business object. But when is has got a Release Strategy I can not. Is it right? Am I missing something? Or maybe haven'

  • Combobox dropdown closes when refreshing dataprovider

    Hi, i'm having a small problem when filtering a dataprovider of a combobox and then refresh it. When the dropdown is open before the refresh() call, it'll close itself when refreshing the dataprovider. I've tried overriding the close() method but clo

  • OWB 10g R2 Design repository creation problem

    Hi All, When i try to create OWB repository with Repository assistant i get the following error : ORA-22905 cannot access rows from a non nested table iteam ORA-06512 at line 17. My environment details are as given below. O/S : Windows 2000 Oracle: R

  • Active User Exits and BAdi

    Dear All,             I am in need to find active user exits and BAdis in our implementation. Is there any specific Tcode or Program?. Could anybody help me in this regard. Regards, S.Sridhar