Mail application does not respond even after forcing quit over and over
My mail application is not responding. I have forced quit at least 5 times and I still get the beach ball. This just started happening 2 days ago and now I can't access my mail at all.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Similar Messages
-
my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la
Hello: Welcome to Apple Support Communities!
Could you specify the Mac OS X version and also what computer you
are using it on, with some detail? Some of these kinds of issues, while
they may seem the same across various years of OS X, can have
different causes and also different cures.
With that information, someone may be capable of researching a reply
most suited to try & see if it works in your computer + OS X system.
One idea, which may/may not help, would be to start the computer
from its most recent OS X DVD install disc, unless it has OS X 10.7
or Later, where there is a Recovery partition on the HDD to boot from.
Then use Disk Utility> repair disk, while there, also repair permissions.
Thanks.
Good luck & happy computing! -
The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?
This is the ipod touch forum
-
Not sure what I did, but Preview continues to stay frozen even after force quitting, rebooting and reopening. It seems like it is trying to open all 720 pdf documents I have on my internal memory. That's my best guess... I really don't know what happened. I've tried clicking the 'close windows when closing application' option under general settings and every other thing I've seen listed on help sites... nothing is working. PLEASE HELP?!?
Back up all data. Quit Preview if it's running.
Hold down the option key and select Go ▹ Library from the Finder menu bar. From the Library folder, delete the following items, if they exist:
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Log out and log back in. Launch the application and test. -
Question: What do I do if ipod does not respond even after reset
I tried the advise, holding the sleep button and when the red slider appears I touched on the home screen until it fades. Still doest respond if aI turn on the pod. Please help, I can buy a new one anymore
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Mail application does not import messages after installation of yosemite 10.10
after installing yosemite 10.10 mail does not start up but gives a message that the mail index is damaged. how do i get it to import my messages and star up again.
Hello CMK1950,
The article linked below details a number of steps that can help get your Mac to successfully boot up.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/TS2570
Cheers,
Allen -
IPad touch screen does not respond even after full restore and update
I have an iPad 2 64 GB
It has for a number of months intermittently stopped responding to any touch screen inputs. This issue began almost as soon as I opened the iPad for the first time. As it was happening very rarely and normally responded eventually, so I thought nothing of it.
This week the iPad will not respond to any touch input at all (Home, On/Off, Volume and Mute buttons still respond). I have tried the hard reset process a number of times and still nothing.
I backed up the device to my machine and applied the latest update 5.1.1 and still no response. I then did a factory reset and still nothing.
I have never dropped or damaged my iPad in any way.
Does anybody know of any ongoing issues with the touch screen or a solution to this problem?Thank you.
I've already booked myself in to the Genius Bar this week.
I suspect it is a hardware failure and more specifically a loose internal connection. -
It is getting very frustrating to have Apple products.
Constant software upgrades and product releases seems to be the sole focus of Apple.
Apple does not offer hardware repair services. I can understand this policy when products do not fail. But it seems that this is not the case with Apple, as it becomes frequent that products fail just after the warranty period.
New software releases also destroyed the value of a "GREAT EXPERIENCE". YouTube, Google Maps, ... all features that are deleted with the latest IOS and that Apple could not properly replace.
It seems that Apple products are not 'consummable' products but 'disposable' products.
Let's see how robust SAMSUNG tablets areApple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
The rest of your post is just a rant. Enjoy your Samsung products. -
IPhoto does not respond even after I upgraded to iLife '11 version
Every time that I attempt to open up iPhoto it immediately freezes, and all the sites and manuals I have read say that I need to reinstall the program, I need to upgrade to the '11 version anyway (I had the '09 version I think) so I just bought the upgrade from the app store hoping that would fix the issue. Now it does open for two seconds, then says that I need to upgrade my library. I click ok and then it freezes up again. I am beyond frustrated and could really use the help, thanks!
Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
The rest of your post is just a rant. Enjoy your Samsung products. -
N7k console not responding even after proper boot, and even from rommon mode
N7k console not responding even after proper boot, and even from rommon mode
Try using a different application (putty) and test. If that does not work, RMA the sup.
HTH -
HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.
Mail application does not work after upgrade to Mavericks.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful. -
New mail button does not respond so can't write mail. help please?
New mail button does not respond so can't write mail. help please?
I am no expert, but open your mail, go to the top of your apple bar click the apple sign then force quit mail, restart and it may work.
I had this issue before and it was resolved. -
CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?
Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..
Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
Best of luck. -
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!
Maybe you are looking for
-
How can i control the ports through firewall please help me by seeing the client and server class Server Class package common.server; import java.io.*; import java.rmi.*; import java.rmi.server.*; import java.rmi.registry.*; import java.util.*; impor
-
How to scan the downloaded files
I have installed Norton 360 in my computer. I want to scan the files that is downloaded using Norton 360. How to do it? and what .exe should i use?
-
what does this error mean. Network Error: Client DATA line length exceeded (Max 1024) from 204.255.44.44 [204.255.44.44] Is there a problem on my server. Thank you, Marcello
-
How do I migrate from Lightroom 3 Windows to Lightroom 3 Mac?
-
Hi I am doing a stacked report in FR and came across a quirk that i didn't know how to solve I am retrieving some calculated values which should all add to 100%. The problem that i am having is that when i do a stacked chart, instead of showing each