Mail Application won't open despite software updates and restarts. Can anyone help?
Hi~
Having major problems with Mail today. Updated all of my software on my Macbook pro and then tried to open Mail which was not responding before the updates. Now it wont even open despite having all software up to date and having tried restarting the computer over and over. When I go to open it it immediately says not responding when I open the Force Quit window. Doesn't matter how long I leave it open. When I try to restart, restart stops as Mail is not responding. have to force quit and start over. Can't access my emails. Anyone have any ideas? PS - I am not very tech savvy, so if you do have ideas, please be clear in how to execute. Thanks in advance!
Had the same problem, I installed the following update and it fixed it for me:
http://support.apple.com/kb/DL1600
Hope this helps!
Similar Messages
-
I am attempting to update my iPhone and iPad ios6 but keep batting message that update failed. Can anyone help.
Follow the instructions in the article from which you posted your question.
If the issue is occuring when trying to update OTA, connect the device(s) to iTunes and try the update. -
Applications won't open after software update
after i installed an automatic software update on my iBook G4, and did the restart, several applications won't open such as Safari, iTunes, iChat. I tried to reinstall the software update, but that won't open either. it just jumps up and down like normal, and then won't open. after i try again, it jumps only once. what the heck is happening??? and i'm not very computer smart so dumb it up for me
Hello, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates. -
:S
If you are sure that it is charged and you still can't get it to power on. You may need to reload the OS. If you need help doing this let me know.
-
Just updated itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Question
Images won't open in my gmail or websites can anybody help me? This happen when I updated to the newest version of FirefoxIf images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
* Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.
* [[Troubleshooting extensions and themes]] -
Photoshop won't open after shut down and restart. Any ideas?
Photoshop won't open after shut down and restart? Any ideas?
HazelydogsApple does not support 3rd party software. Again, post in Adobe's forums. Plenty of Mac users there who uses their products.
-
I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?
Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash. -
I am trying to open a MPEG video clip using Quicktime and it wont let me, keeps saying a codec is required. So I click on tell me more, have downloaded Quicktime 7 on numerous occasions thinking this was the problem, and it still wont let me open in. Really confused! Can anyone help???
Try VLC.
-
When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?
Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank -
I want to develop photoshop like basic software using c programming.can anyone help
I want to develop photoshop like basic software using c programming.can anyone help.any suggestions.Any good programming resouces where i can learn to do it.thanks in advance
I think it would be complex to make that i can suggest you good resources for c programming.cprogramming .com is for high level if ur expert in c programmming.if u are beginner cprogramming.tk will help you.cpluslus is for discussing about c programming.
http://www.cprogramming.com
http://www.cprogramming.tk/
http://www.cplusplus.com
I hope it helps.best of luck -
my i-phone wont connect to i-tunes i canceled the update by accident, can anyone help?
You can try entering restore mode. See: http://support.apple.com/kb/HT1808
-
I wish to update my iTunes on my laptop but it wont download off the internet or via the Apple Update Center. Can anyone help?
Use a different browser.
-
hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??
Apple Does Not recommend that. Please Read.
http://support.apple.com/kb/HT1490
From that article
"Portables with built-in batteries"
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
MacBook
MacBook (13-inch, Late 2009) and later
MacBook Air
MacBook Air (all models)
MacBook Pro
MacBook Pro with Retina display (all models)
MacBook Pro (13-inch, Mid 2009) and later
MacBook Pro (15-inch, Mid 2009) and later
MacBook Pro (17-inch, Early 2009) and later
Thanks.
Allan Mac wrote:
Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
Allan -
HT201413 my iphone 3g connot be update and reatore can you help me please
my iphone 3g connot be update and reatore can you help me please
my iphone 3g connot be update and restore can you help me please
Maybe you are looking for
-
Calculation of depreciation for IT purpose
Hi guru Presently we are in 6.0 version.Book dep is caculated as a normal process.Now my client wants to calculate dep. for IT in sap.What are the additional configuration setting required for doing that. Thanks Shivaji
-
How to define a function with table type parameter
Hello All, Here is the requirement .. cursor c is select first_name, last_name , ssn from employee ; TYPE employee_type IS TABLE OF c%rowtype; tbl_employee_type employee_type; I want to pass the parameter to a function the ssn -: tbl_employee_type(1)
-
How to see no .of records in a column on BW user repot
On BW user report (not analyzer the excel like report that buisiness uses to view report s output) how would i do GROUP BY on one particular column so that it gives me total no of records present in that column. scenario - buisiness wants to see no o
-
Iphoto won't recognize/import the new photos on my iphone 4s
All the photos I've taken the last 3 weeks with my iphone 4s just won't load with sync (but they did load fine for the first 2 months.) When I click on the phone icon in iphoto '09, it will only show the photos that have already been downloaded to i
-
Merging Mail & Photos between 2 iMacs
I have two iMacs; an older model and a newer model. I want to import the mail and photos from my old iMac into my new iMac. I have already backed-up these files onto an external hard drive. My question; is there a way to import the mail messages (sen