Mail body not visible

Recently (foloowing IOS 5.1 upgrade?) the mail program has stopped showing the mail message body (unless I reply or forward). Any ideas on how to fix?

Try closing the Mail app completely and see if you can view the email text when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then do a reset and see if they show after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

Some workflow Mail items not visible in SCOT in QA but there in Development

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Hi,
In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
Regards,
Arcahna

Messages arrive with body not visible

I am starting to see a number of mail messages arriving in my Inbox which I cannot read because the content is not visible. The message size in the Message viewer suggests that there is content (15kB, for example) but no amount of manipulation -- e.g., selecting the whole message and trying to force the text color to black -- seems to work.
If I click "reply" then in the composition window which appears the message is visible.
When this first started happening I thought there was something funny about the sender's software, but these invisible messages are coming from a variety of sources.
This has just started happening in the last week or so.
Is anyone else seeing this?

I quit Mail and restarted it -- the invisible messages are now visible.
It is still a mystery since this problem has spanned several launches of the Mail app.

Opened mail messages not visible on screen

all of a sudden, when I open a mail message from my inbox, or any other mailbox, the message opens up on the top left side of my screen, but is only partially visible. I am unable to drag the message back into the center of the screen. Although I can click on and drag the bottom, right hand corner, that only increases the size of the message window, but does not unhide the rest of the message and the message header from the top, right hand side.
additionally, when I click on mail preferences, or about mail, the related info is no longer visible on the screen.
The mail inbox however, is fully visible.
thanks for any help with this.
neil

quit Mail and start it again. is it still doing this? if so your Mail preferences are likely corrupt. quit Mail and delete (or move to the desktop) the file ~/library/preferences/com.apple.mail.plist. ~ means your home directory. you can get to it by clicking on the house icon in the sidebar of any finder window or by going to /users/username.
then start Mail. you'll have to recreate all your email accounts so make sure you know all their settings. once recreated they will recognize their existing mailboxes. see if Mail behaves after that.
Alternatively, if you have a backup, restore com.apple.mail.plist from backup from before the problems with Mail started. Mail should not be running when you do this.

Iview body not visible

Hi all,
Our requirement is that when the user opens the universal worklist for MSS, the user should see the UWL as well as an overview of the HCM processes overview (A WD ABAP application that we have developed).
What i have done is assigned 2 iviews to the UWL page -
(1) UWL iview
(2) The HCM processes overview iview
When i call this page from the detailed navigation, the page opens and both the iviews are displayed one beneath the other.
However, when i call the same page from the area page, i see the first iview ( UWL) completely, and i only see the tray name of the second iview. i.e. the body of the second iview is not visible in the page.
I am unable to place the possible reason for this behaviour as the same page is being called from both the detailed navigation and the area page.
Any pointers in this regard will be appreciated.
TIA.
Regards,
Diana

Hi,
We are now calling the HCM process overview page in the area page instead of the UWL page. So what we have now is the HCM process ovewview page renamed as UWL calling the standard HCM process overview iview and the UWL iview. ( i.e.We have added the UWL iview to the HCM process overview page).
Now, when we open this page from the area page, the HCM process overview iview is not getting displayed initially. But when we refresh the page, the HCM process overview gets displayed.
Is there a way we can ensure that both the iviews are displayed initially itself, without any refresh? Are there any settings for this?
TIA
Regards,
Diana

New mail messages not visible--"detected corrupt database" related?

I am using Mail.app and an iPod Touch with an Exchange server (Intermedia). All of a sudden in the last few days, recent mail on the server is not visible using Mail.app or the iPod Touch. I have deleted the mail accounts on both devices twice and done an entirely fresh download of all mail on both, and the problem persists.
Mail in the Inbox is visible. However, if I move an Inbox message to, say, Archive or Travel, then it becomes invisible--even though it is intact on the server and in its proper location there.
I have also repaired permissions and run sudo daily/weekly/monthly maintenance processes, to no avail.
In the console, I see the following error message. Could this be related and is there a way to fix it?
Jul 17 11:14:36 xxx-xxxx-macbook Mail[108]: ISyncDataDirectoryCorruptedException: detected corrupt database while executing delete from Record
Thanks for any help.
Message was edited by: RKNYC

Update: all messages are viewable in Entourage Exchange Web Services 2008, but not in Apple Mail, or in Mail on my iPod Touch, or after a new download of all mail on another Mac in Mail.app. Why is Entourage able to see all the messages while all the Apple Mail clients are missing them?

Mails are not visible in UWL Inbox

Dear All,
I am facing a problem related to UWL. we have upgraded the patch level of EP 7.0 from SP10 to SP15. Now problem is occuring in ESS Inbox (UWL) as Our 'inbox' in the portal is basically a replication of the workflow inbox in R/3. i am able to apply for leaves or claims activities (workflow) properly but at the end of approver, mail is not coming in ESS Inbox (portal).
Kindly help me out.
Thanks & Regards
Nivedita

Hi Nivedita,
I m also facing the same probelm. I configured UWL and also deployed SONiC. Fortunately SONiC doesnt support SP15.
U said u raised a SAP Note. Kindly tell me the solution once u got the reply from them.
I Would be much thankful.
Warm Regards,
Venkat...

[E2013][EWS-XML][EWSTOOL] Calendar item body not visible in outlook

Hi, after upgrading to Exchange 2013 SP1 we experience the issue that appointments created using EWS by our ERP application don't show the body in Outlook 2010/2013. The appointment body is only visible in OWA or on Active Sync devices. Outlook just shows
an empty body text. When openening the appointment in OWA and editting the body text, by placing a '.' at the end for example, then the body text is visible in outlook again. This worked fine in CU3 and earlier.
I created a repro scenario using the EWSEditor tool:
https://ewseditor.codeplex.com/
Create an appointment using EWS. Below the request I've sent to Exchange EWS. It creates an appointment on Saturday, March 8th from 22:00 to 23:00 with the following text in the body: ‘Plan the agenda for next week's meeting.’. The request is successful and
the appointment is being created. However, the body text is only visible in Outlook Web App, not in Outlook.
I reproduced this issue in our lab also, so it’s not specific to our production Exchange server, but seems to be a general SP1 issue.
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types">
<soap:Body>
<CreateItem xmlns="http://schemas.microsoft.com/exchange/services/2006/messages"
xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types"
SendMeetingInvitations="SendToAllAndSaveCopy" >
<SavedItemFolderId>
<t:DistinguishedFolderId Id="calendar"/>
</SavedItemFolderId>
<Items>
<t:CalendarItem xmlns="http://schemas.microsoft.com/exchange/services/2006/types">
<Subject>Planning Meeting</Subject>
<Body BodyType="Text">Plan the agenda for next week's meeting.</Body>
<ReminderIsSet>true</ReminderIsSet>
<ReminderMinutesBeforeStart>15</ReminderMinutesBeforeStart>
<Start>2014-03-08T22:00:00</Start>
<End>2014-03-08T23:00:00</End>
<IsAllDayEvent>false</IsAllDayEvent>
<LegacyFreeBusyStatus>Busy</LegacyFreeBusyStatus>
<Location>Conference Room 721</Location>
</t:CalendarItem>
</Items>
</CreateItem>
</soap:Body>
</soap:Envelope>
Frank.

I got our developers change the body type to HTML. Still it doesn't work.
Our code is java
-238,21
+238,21 @@ public class WebServiceExchInteractor extends ExchangeInteractor
                logger.debug("Sending new meeting request using exchange web services. Meeting Item = " + item.toString());
                boolean errorOccurred = false;
                try
                CalendarItemType calendarItemObj = CalendarItemType.Factory.newInstance();
                    //Setting subject and body of the meeting
                calendarItemObj.setSubject(item.getSubject());
                    BodyType bodyObj = BodyType.Factory.newInstance();
+                   bodyObj.setBodyType(BodyTypeType.HTML);
                    bodyObj.setStringValue(item.getBody());
                    calendarItemObj.setBody(bodyObj);
                    //setting the attendees
                    calendarItemObj.setRequiredAttendees(constructArrayOfAttendeesType(item.getAttendees()));
                    //Setting the Meeting time and reminder properties
                    calendarItemObj.setReminderIsSet(item.isReminder());
                    calendarItemObj.setReminderMinutesBeforeStart(ExchangeConstants.DEFAULT_FREE_BUSY_INTERVAL);
-439,21
+439,21 @@ public class WebServiceExchInteractor extends ExchangeInteractor
                        itemFieldChangesArray[3] = SetItemFieldType.Factory.newInstance();
                        itemFieldChangesArray[3].setItem(calendarItemObj);
                        PathToUnindexedFieldType pathToSubjectObj = PathToUnindexedFieldType.Factory.newInstance();
                        pathToSubjectObj.setFieldURI(UnindexedFieldURIType.ITEM_SUBJECT);
                        itemFieldChangesArray[3].setPath(pathToSubjectObj);
                        //Setting the path to body
                        calendarItemObj = CalendarItemType.Factory.newInstance();
                        BodyType bodyObj = BodyType.Factory.newInstance();
+                       bodyObj.setBodyType(BodyTypeType.HTML);
                        bodyObj.setStringValue(item.getBody());
                        calendarItemObj.setBody(bodyObj);
                        itemFieldChangesArray[4] = SetItemFieldType.Factory.newInstance();
                        itemFieldChangesArray[4].setCalendarItem(calendarItemObj);
                        PathToUnindexedFieldType pathToBodyObj = PathToUnindexedFieldType.Factory.newInstance();
                        pathToBodyObj.setFieldURI(UnindexedFieldURIType.ITEM_BODY);
                        itemFieldChangesArray[4].setPath(pathToBodyObj);
                        //Setting the path to attendees
-642,21
+642,21 @@ public class WebServiceExchInteractor extends ExchangeInteractor
         ItemIdType[] itemIdDetails = new ItemIdType[1];
         itemIdDetails[0] = ItemIdType.Factory.newInstance();
         itemIdDetails[0].setId(itemId);
         NonEmptyArrayOfBaseItemIdsType itemIdObj = NonEmptyArrayOfBaseItemIdsType.Factory.newInstance();
         itemIdObj.setItemIdArray(itemIdDetails);
         getCalendaritem.setItemIds(itemIdObj);
         //Setting the response properties required from server
         ItemResponseShapeType responseDetails = ItemResponseShapeType.Factory.newInstance();
+        responseDetails.setBodyType(BodyTypeResponseType.HTML);
         responseDetails.setBaseShape(DefaultShapeNamesType.ALL_PROPERTIES);
         PathToUnindexedFieldType uidView = PathToUnindexedFieldType.Factory.newInstance();
         uidView.setFieldURI(UnindexedFieldURIType.CALENDAR_UID);
         BasePathToElementType[] pathArray = new BasePathToElementType[1];
         pathArray[0] = uidView;
         NonEmptyArrayOfPathsToElementType additionalProperties = NonEmptyArrayOfPathsToElementType.Factory.newInstance();
         additionalProperties.setPathArray(pathArray);
         responseDetails.setAdditionalProperties(additionalProperties);
         getCalendaritem.setItemShape(responseDetails);
-710,21
+710,21 @@ public class WebServiceExchInteractor extends ExchangeInteractor
            itemIdDetails[0] = ItemIdType.Factory.newInstance();
            itemIdDetails[0].setId(itemId);
            itemIdDetails[0].setChangeKey(changeKey);
            NonEmptyArrayOfBaseItemIdsType itemIdObj = NonEmptyArrayOfBaseItemIdsType.Factory.newInstance();
            itemIdObj.setItemIdArray(itemIdDetails);
            getCalendaritem.setItemIds(itemIdObj);
            //Setting the response properties required from server
            ItemResponseShapeType responseDetails = ItemResponseShapeType.Factory.newInstance();
+           responseDetails.setBodyType(BodyTypeResponseType.HTML);
            responseDetails.setBaseShape(DefaultShapeNamesType.ALL_PROPERTIES);
         PathToUnindexedFieldType uidView = PathToUnindexedFieldType.Factory.newInstance();
         uidView.setFieldURI(UnindexedFieldURIType.CALENDAR_UID);
         BasePathToElementType[] pathArray = new BasePathToElementType[1];
         pathArray[0] = uidView;
         NonEmptyArrayOfPathsToElementType additionalProperties = NonEmptyArrayOfPathsToElementType.Factory.newInstance();
         additionalProperties.setPathArray(pathArray);
         responseDetails.setAdditionalProperties(additionalProperties);
            getCalendaritem.setItemShape(responseDetails);
SONY ABRAHAM

Including hyperlink in outlook mail body not working

Hi,
We have a requirement to open an outlook mail on click of a link on webdynpro screen and also inlcude a hyperlink in the body of the mail.
I created a LinkToURL and assinged the following to the 'reference' property :-
mailto:?body=http://<xyz>:80/DSARCLNK_AP10D/CONTENTSERVER.ASP?get&pVersion=0045&contRep=D1&docId=AP10D_332
Outlook opens properly, but the complete link is not appearing in the body of the e-mail.
it shows just the following :-
http://<xyz>:80/DSARCLNK_AP10D/CONTENTSERVER.ASP?get
so what's happening is it breaks when it finds '&'.
Can some one help me in resolving this issue?
Thanks,
Hari

Hi Hari,
Replace "&" by "%26"
Best regards, Maksim Rashchynski.

Yahoo mail inbox not visible on mail

Hi all,
not sure what happened between Monday afternoon and today, but all of a sudden my yahoo mail's inbox is no longer visible. It shows 0 messages. I seem to have access to any other folders for the mailbox, but not the inbox. This is also occurring on my iPad and iPhone. Has anyone seen this before? I updated to Yosemite about 2 weeks ago. Not sure if it has anything to do with that, since it only happened now. I also cant seem to find any issues with Yahoo, and I am able to log into yahoo mail directly and I can see all the new emails and my entire inbox. I have removed and reinstalled the mailbox several times, and also tried to update the settings, but nothing. If anyone has any ideas, that would be great.
thanks

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Intermittent mail body not loading, just headers

Recently I started having trouble with the body of messages not loading. Mail will work fine, then all of a sudden it will not load messages body. It doesn't matter if it is mail already on the computer or starting a new message. If it is acting like this and I start a new message, there will be no blinking curser in the body. No access at all to the body, only the Subject, To, From, Etc. but not the body.
In all cases it is rectified if I Quit Mail and when I relaunch Mail it works fine for hours more. Sometimes it happens each day, sometimes every few days and other times a few times per day. No discernible pattern.
All input is greatly appreciated.
Tim

Hi Tim,
Since it's intermittent, have you run the Apple Hardware Test CD?
I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Animated gif in mail are not visible after upgrade to mavericks

Hi,
I use a animated gif in my signature in mail. This gif was playing normally (like a animated gif) in mountain lion when I writes a new message. After upgrading to mavericks I can't see the animated gif playing. I just see the first frame. However when I send a mail to my iPad using iOS 7 the animated gif is playing normally.
Thanx for every answer!

I'm having this issue as well — I can no longer send animated gifs in Mail with Mavericks (10.9.0). The image retains its full image size and remains a gif format, but does not play, just sits static. This also affects forwarding animated gifs — which play fine in the mail window — they are static in the compose window and are sent static.

10.9.2 mail viewer not visible & won't quit?

Getting really frustrated now. I love my imac, it has always worked swiftly & flawlessly. I recently upgraded the OS from 10.6 to this new mavericks 10.9.2. All seems to have gone fine except mail. When i first opened mail i spent a few minutes changing the display back to the classic view i am used to. It all seemed to be fine. I think i made it full screen at one point (and this does something with spaces...a new desktop or something)? Anyway, now mail is lit up in the dock but i can't view the window anywhere, nor can i quit mail? What i have found is in the top right corner of screen there is an icon that looks like 3 i's on there side. This brings up the messages down the right hand side of the screen, and i can click on those which opens that one mail in a new window. What i want though is the whole mail with all my messages displayed in date order? Any ideas guys n gals please?

Is an external display connected and turned off? If not, open Mission Control. Do you see the window(s) in any other spaces?

Mail subfolders not visible

After updating to OS X YosemiteI find that my mail subfolders are no longer visible. Can anyone help? I'm operating Version 8.2 (2070.6) of Mail.

Check this article out:
http://www.macworld.com/weblogs/macosxhints/2006/11/mailcolor/index.php

Mail messages not visible after importing from entourage

I received confirmation that messages have been imported sucessfully from entourage and the imported folders have unread messages sitting in the folders. However when i try to open folder it is empty. Can anybody help?
I am running mail 2.0.5. I thought the best solution would be to reload mail application again but i cannot locate download for mail application.

I need help also - to anyone out there - after importing the data from Entourage, in addition to missing messages, my mail.app is now running so slow (both downloading messages and opening messages).
The mail.app "Help" is also not opening up.
I wanted to re-load the software also to see if it will correct everything but do not know where to get the application from - is this the best thing to do or what alternatives are there?
Thanks,
gailp

Mail body not visible

Similar Messages

Maybe you are looking for