Mail broken after update to 10.0.10.90
Hi,
I got my BB Z10 with OS 10.0.10.261. Last week my phone shows an available Update to 10.0.10.90.
Since update I can't send Emails over a Qmail SMTP server. I see following error in the server log: stray new line detected, closing connection.
It's not a server failure, 1000s of other clients use the servers without problems.
Please help!!!!
Regards Carsten
Thank you RIM/Blackberry for no solution.
A "normal" user without a own email-server can´t figure out what exactly the problem is. I´m in the happy position to work for an email-provider, so I can take a look at the server logs.
The firmware 10.0.10.90 tries to send out email which is noch rfc compliant. I can´t understand why a fix takes so much time if this problem does not occur in orther firmware releases.
I´m happy this problem effects only my private account cause all my business accounts are Exchange active-sync.
But what about all the blackberry users who only want to sent private emails????
What a shame for Blackberry.........
Similar Messages
-
Hi folks,
Note: I've found a way to post images... here they are...
[http://i1087.photobucket.com/albums/j480/_Melk_/iGoogle_Firefox_broken2.png iGoogle Firefox Broken (same in version 5.x, 6.x & 7.x)]
[http://i1087.photobucket.com/albums/j480/_Melk_/iGoogle_IE9_Working.png iGoogle Firefox IE9 Working (was like this on FF too before last update)]
This is a good one so bear with me, I'll try to be as precise as I can.
I updated FF to 6.0.2 yesterday and since then iGoogle (and perhaps other pages.. not sure on this) does not display correctly anymore.
Most evident is the fact that the links "Advanced Search" and "Language Tools" shown (usually) on the right side of the search edit box, don't show up anymore.
Other changes are the graphics which are used by the gadgets. In IE9 & FF before the update, each gadget showed round corners, not anymore in FF after update. Also, if I try to change the theme, the buttons "Add This" don't show up in FF now.
Now, here's the kicker! I completely removed Firefox from my system, meaning uninstalled it using the remove settings as well. I also deleted my profile folder & the Mozilla Firefox folder after the uninstall. Then I reinstalled version FIVE (5.0) to see if I could revert to the why things were back then, and behold, same problem!! So now, I can't repair my firefox to work properly even if I return to older versions!? wow
Tried system restore to a few days ago, that didn't fix it.
Tried version 5.x, 6.x and even the beta 7.x (all from scratch after uninstalling and deleting the profile folder + program files(x86) Mozilla folder) --- still NO FIX! ack! ;)
Frankly, I'm at my wits end on this one. I usually can repair pretty much anything computer/OS related, but this one has me stumped.
Thanks in advance for ANY help provided.. much appreciated :)
/cheers
P.S. I also tried safe mode (took the broken FF picture in Safe Mode), but it has the same issues. In other words, I'm now officially unable to have ANY version of Firefox display iGoogle correctly anymore (5.x, 6.x, even beta 7.x). Be it bare bone, with or without addons, etc etc. All this caused by updating to 6.0.2 from 6.0.1.
Note that I've done tons of updates before without any issues. Also been using FF for the last 6+ years I think (been a while ;) )Turns out that it's iGoogle Styling that has changed! Not a Firefox bug (although there are bugs in the new iGoogle).
The changes to my homepage (iGoogle) happened just as I was updating 6.0.2. So this led me to believe it was a Firefox bug, and since IE9 still shows the OLD style on iGoogle, it reinforced this belief.
After reading up on it on the Google forums, and chatting with a great tech support on Mozilla tech, I realized it wasn't Firefox. So you can dismiss this as a human error ;)
/cheers -
Mail crashes after Update to 10.10.3
Hello all,
I am using a MacBook Pro 15" from Mid 2010 with a Prozessor 2,66 GHz.
I have just installed the Update 10.10.3
Now I am unable to start my Mail Programm. It starts up Mail and after a short view of Mail it crashes and shows me the ErrorMessage.
Has anyone a idea how to fix this.
Thank you
RenéLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
Mail problem after update to 10.9.5
Hi All,
after updating to 10.9.5 Mail (ver 7.3) does not download anymore any new mail.
By clicking on the envelope button in upper left corner does not produce any effect (no sound , no progress bar, no mail downloaded).
Sending mail seems to be ok.
Any help will be great.
Thank you !
AlexOS X Mail: Troubleshooting sending and receiving email messages
-
Mail crashes after update 10.10.1......:-(
Anyone having the same issue?
After updating to 10.10.1 my email started crashing also. I spent my whole morning with the Apple support tech guy. I was instructed to remove my mail folder from the library and add again my account info. Everything was working fine then... BUT as soon as I added my other exchange and google accounts... it crashed again. So I made my google account inactive and it is working fine since then. I guess this is a problem that they will have to fix quick hey?!?
-
No conection with the mail server after update to 10.4.7
I'm already loosing my head!!
I've updated to 10.4.7 and after appeared a dialog box message. link of the message in portuguese (http://rapidshare.de/files/26407351/mail.tiff.html)
In english it means: Mail have beed updated. Do you want allow that the new version access the same items of keys (as password) that the old version?
-This change is permanent and efects all the items of keys used by mail.
*Aply *don't aply
So after this my mail loosed the connection with any server, I can't connect any account with the mail, but using Thunderbird it work okay.
Somebody help me!!
Thanks in advance.Don't panic, or you'll end up making things worse (if you haven't already).
The Mac OS X 10.4.7 Update has introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". If that's the problem, you must go to System Preferences > Network and disable the SOCKS Proxy in the network configuration used to connect to the Internet, if it's enabled. -
Mail crashes after updating iPod touch 2g
I just updated my iPod touch 2g. Now Mail crashes after starting it! It opens for just a few seconds and than closes itselves. But it shows me that i've got new messanges at the icon.
Please Help me!!!
ThanksTry doing a restore - then setup as a new iPod. You will not have the same layout, but all your content will be the same. All I can think of is that something got corrupt and the only way to fix that is a restore - setup as new iPod.
Hope this helps. -
Unable to access mail accounts after updating to ios6
After updating to ios6 mt iphone 4 now wont connect to anything and cant access mail accounts,icloud or internet!
Found by accessing restrictions and turning off exiting and re-entering restriction code problem solved...
-
Mail crashed after update to 4.8
hello,
after updating a 1GHz 17" flat panel iMac from 4.4 to 4.8, OSX Mail crashes immediately at startup. the log says: 'Library not found'. i have a feeling this might have to do with the fact that my system is the Dutch version? anybody any ideas? i tried deleting the plist for Mail, and it seems option-apple-p-r doesn't work!
any help appreciated.
robertHello Robert.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you're using:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed. -
Mail receiving after updating to iOS 7.1
After update to iOS 7.1 connecting to mail server failed with iPad ans iPhone. Even to rebuild the account after deleting it did not help. Any answers?
You can try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. -
App Store broken after updates
OSX 10.9.5, App Store Version 1.3 (201.7)
After updating some software, the App Store broke, looks like the CSS is not loading. Furthermore, "Some updates could not be installed automatically" - the App Store icon shows "1" in red circle, in it the Update part also shows "1", but clicking on Updates icon displays nothing.
I've sign out of App Store, and after than i cannot sign in back (connection failed).
Also, the suport page in safari looks broken too:
Please advise
MarcinFollowing the updating of a number of iPad apps on my MacBook Pro today (April 18) I had EXACTLY the same problems occur as mzagor described in an earlier post. Everything seems identical in my screen displays to the screen shots shared by mzagor, with the addition in my case of the iTunes Store not loading and throwing up error message windows stating that, "iTunes can't verify the identity of the server "init.itunes.apple.com". The certificate for this server is invalid. ..." 7 additional similar certificates follow as iTunes attempts to log in to other Apple servers.
I spent over an hour on the phone with an Apple tech, not knowing that others were having a similar issue as I. We almost got to the point of reinstalling Mavericks - but I balked at that. The well meaning tech suggested that this could be a hardware issue and that I should have the computer checked at an Apple Store (90 minutes away).
HOWEVER! on this same MacBook Pro, I can, using a DIFFERENT User login (which had been previously created) successfully log into;
- the iTunes Store,
- the App Store, and get to
- the Apple web site Support section through Safari,
without any issues or error messages and with the each of the screen displays showing up as they should. I can log into my Apple ID account without issue.
It would appear that there is a connection to the stated difficulties I am experiencing, with the act of updating apps using the App Store in Mavericks (v10.9.5)
Hopefully, the issue will be acknowledged and a solution will be found and shared quickly. -
Parental Controls Broken After Updating an Application
I'm using Parental Controls (remotely) under 10.5.4 to manage what applications can be opened in a small lab. This works well until I need to update an application on the lab computers. I'll use Firefox as an example, but this happens with all applications.
- I have a version of Firefox on all lab computers (3.0) and Firefox is allowed under parental controls. Everything works.
- I update Firefox to 3.0.1. (In this case, I simply overwrote the older version of firefox, but I get this problem when updating applications with installers.)
- If I remotely look at the Parental Controls settings for the lab computer, I can see that Firefox is still allowed (checked)
- Now, on the lab computer, I log into the managed account and try to open Firefox, I get a warning about the application not being on the allowed list.
- I log out of the lab computer, and again, access the parental controls setting remotely. Now Firefox is Not Allowed (unchecked).
- I check the box to allow Firefox
- Now when I log into the managed account, the new version of Firefox opens.
Some fixex / workarounds I have tried:
- After updating Firefox, I remotely accessed the parental controls settings and first disallowed (unchecked) Firefox, close parental controls, reopened it, and then allowed (checked) Firefox. When logged into the managed account, opening Firefox produced the not allowed error. When I return to the Parental Controls settings, Firefox is now Not Allowed (unchecked). Checking the box to allow Firefox fix the error.
- I've tried restarting after updating Firefox and it did not work.
My guess:
I assume that Leopard keeps a list of applications and versions installed on the computer. Parental Controls allows a specific combination and any update will break the parental controls. To allow this updated application to be opened, its old entry in the list must be updated to reflect the new version. The only way I have figured out how to do this, is to try and open the updated application and fail. Then I can finally allow the updated version.
Does anyone know of an automated or scritable way to do this. I have tried working with lsregister, but have not had any success. I need a way to force Leopard to reload / refresh its list of installed applications, with having a user logged into the console.
For a different solution, does if you can send a UNIX command to machine sitting on it login screen, that will cause the machine to login as a local console user. I could then send "open /path/to/updated app" and a logout to force the application list to be refreshed.
Many Thanks in advance for any help.Hi! Did you ever receive any feedback on this issue?
I am interested since I have noticed the exact same frustration with Parental Controls since updating to 10.5.
While a very good idea, I think the parental controls, especially with respect to permissions about applications is utterly useless at the moment. It is completely stupid that I have to reset the permissions for applications each and every time I update an application. I have three children who use the computer and I don't want them using every bit of software on the eMac. They are naturally curious and will click on programs that can do damage without realizing is.
I have also turned off any parental controls regarding web browsing but my children still hit many sites that are blocked by Parental Controls. I do have a linux gateway that does the filtering quicker and better.
If anyone at Apple is listening ... please spend some time to fix this for the next update.
Thank you. -
Multiseat with Lightdm broken after updating Mesa
Hi,
I've been using a multiseat configuration for months now, and it was working almost perfectly (almost - multiseating is far from being really stable yet IMHO, but anyway).
I updated mesa-libgl a few days ago and confirmed packages replacement, but right after rebooting my second seat didn't work anymore. The display stays black and no login screen shows up, although I suppose a signal is still sent as the monitor doesn't go into sleep mode. The first seat on the other side is working as usual, no difference noted.
In the processes, I can only see one Xorg instance (used by the first seat), when I'm supposed to have tow instances, one for each seat and with different parameters. It's like the second seat is crashing, but I can see no trace of such crash in the logs (kernel.log or everything.log). Even the Xorg.1.log contains all the informations as if the display was running fine.
The day after updating Mesa, I also updated Lightdm but it didn't change anything (I had a brief hope for a moment).
My configuration is the following :
- Nvidia GTX 760: used on seat0 as dual-head with Nouveau driver (Layout-Main in Xorg)
- Intel GMA: used on seat1 on single-head with Intel driver (Layout-Aux in Xorg)
I'm using Lightdm with this configuration:
[LightDM]
minimum-vt=1
run-directory=/run/lightdm
[SeatDefaults]
greeter-session=lightdm-gtk-greeter
greeter-show-manual-login=true
session-wrapper=/etc/lightdm/Xsession
greeter-setup-script=/usr/bin/numlockx on
[Seat:0]
xserver-command=/usr/bin/X :0 -sharevts
xserver-layout=Layout-Main
[Seat:1]
xserver-command=/usr/bin/X :1 -sharevts -novtswitch
xserver-layout=Layout-Aux
The Xorg configuration for the seats is divided into two files:
/etc/X11/xorg.conf.d/50-serverlayout-main.conf
Section "ServerLayout"
Identifier "Layout-Main"
Screen "Screen-Main" 0 0
InputDevice "Logitech-Illuminated" "CoreKeyboard"
InputDevice "Logitech-G100S" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "Logitech-G100S"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "Logitech-Illuminated"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2433"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2333sw"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA-GTX760"
Driver "nouveau"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 760"
EndSection
Section "Screen"
Identifier "Screen-Main"
Device "NVIDIA-GTX760"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d/51-serverlayout-aux.conf
Section "ServerLayout"
Identifier "Layout-Aux"
Screen "Screen-Aux" 0 0
InputDevice "K400r-keyboard" "CoreKeyboard"
InputDevice "K400r-keyboard-multimedia" "SendCoreEvents"
InputDevice "K400r-mouse" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "K400r-mouse"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard-multimedia"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "XkbModel" "evdev"
Option "GrabDevice" "on"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Compaq"
ModelName "Compaq Q2159"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Intel-I915"
Driver "intel"
VendorName "Intel"
BoardName "Intel IGP"
BusID "PCI:0:2:0"
# Option "NoAccel" "True"
# Option "DRI" "False"
# Option "TearFree" "true"
# Option "AccelMethod" "sna"
EndSection
Section "Screen"
Identifier "Screen-Aux"
Device "Intel-I915"
Monitor "Monitor1"
DefaultDepth 24
EndSection
When I disable the primary seat configuration in Xorg files (I just prevent the file from being loaded), and after I restart Lightm via
# systemctl restart lightdm
the display shows up correctly on the secondary seat (and not on the primary, which is logical so far). So in the end it seems I just cannot have both seat running at the same time, but individually they work fine.
My logical assumption is that the recent upgrade of the Mesa packages somehow broke this configuration, but I cannot find why and how.
FYI, here's what I tried:
- play with Intel drivers options in Xorg (NoAccel, DRI, ...)
- play with Xorg options on the command line of each seat (-sharevts, -novtswitch)
- switch to Nvidia proprietary drivers (but here also, only the primary seat works, but that may be for a totally different reason, which is why I used Nouveau ever since I set up this configuration)
Here are the Xorg log files:
Xorg.0.log
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 6.853] X Protocol Version 11, Revision 0
[ 6.853] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 6.853] Current Operating System: Linux leto 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
[ 6.854] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=83e16b30-5b35-4b15-9bce-5ec87c00d46d rw quiet
[ 6.854] Build Date: 21 September 2014 10:53:13AM
[ 6.854]
[ 6.854] Current version of pixman: 0.32.6
[ 6.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 3 23:21:15 2014
[ 6.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.857] (==) ServerLayout "Layout-Main"
[ 6.857] (**) |-->Screen "Screen-Main" (0)
[ 6.857] (**) | |-->Monitor "Monitor0"
[ 6.857] (**) | |-->Device "NVIDIA-GTX760"
[ 6.857] (**) |-->Input Device "Logitech-Illuminated"
[ 6.857] (**) |-->Input Device "Logitech-G100S"
[ 6.857] (==) Automatically adding devices
[ 6.857] (==) Automatically enabling devices
[ 6.857] (==) Automatically adding GPU devices
[ 6.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.858] Entry deleted from font path.
[ 6.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.860] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.860] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.860] (II) Loader magic: 0x818d80
[ 6.860] (II) Module ABI versions:
[ 6.860] X.Org ANSI C Emulation: 0.4
[ 6.860] X.Org Video Driver: 18.0
[ 6.860] X.Org XInput driver : 21.0
[ 6.860] X.Org Server Extension : 8.0
[ 6.861] (EE) systemd-logind: failed to get session: PID 656 does not belong to any known session
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.862] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xdb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 6.862] (--) PCI:*(0:1:0:0) 10de:1187:1462:2848 rev 161, Mem @ 0xda000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 6.862] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.862] (II) LoadModule: "glx"
[ 6.863] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.873] (II) Module glx: vendor="X.Org Foundation"
[ 6.873] compiled for 1.16.1, module version = 1.0.0
[ 6.873] ABI class: X.Org Server Extension, version 8.0
[ 6.873] (==) AIGLX enabled
[ 6.873] (II) LoadModule: "nouveau"
[ 6.874] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 6.875] (II) Module nouveau: vendor="X.Org Foundation"
[ 6.875] compiled for 1.16.1, module version = 1.0.11
[ 6.875] Module class: X.Org Video Driver
[ 6.875] ABI class: X.Org Video Driver, version 18.0
[ 6.875] (II) LoadModule: "evdev"
[ 6.875] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.877] (II) Module evdev: vendor="X.Org Foundation"
[ 6.877] compiled for 1.16.0, module version = 2.9.0
[ 6.877] Module class: X.Org XInput Driver
[ 6.877] ABI class: X.Org XInput driver, version 21.0
[ 6.877] (II) NOUVEAU driver
[ 6.877] (II) NOUVEAU driver for NVIDIA chipset families :
[ 6.877] RIVA TNT (NV04)
[ 6.877] RIVA TNT2 (NV05)
[ 6.877] GeForce 256 (NV10)
[ 6.877] GeForce 2 (NV11, NV15)
[ 6.877] GeForce 4MX (NV17, NV18)
[ 6.877] GeForce 3 (NV20)
[ 6.877] GeForce 4Ti (NV25, NV28)
[ 6.878] GeForce FX (NV3x)
[ 6.878] GeForce 6 (NV4x)
[ 6.878] GeForce 7 (G7x)
[ 6.878] GeForce 8 (G8x)
[ 6.878] GeForce GTX 200 (NVA0)
[ 6.878] GeForce GTX 400 (NVC0)
[ 6.878] (++) using VT number 1
[ 6.878] (II) [drm] nouveau interface version: 1.1.2
[ 6.878] (II) Loading sub module "dri2"
[ 6.878] (II) LoadModule: "dri2"
[ 6.878] (II) Module "dri2" already built-in
[ 6.878] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
[ 6.878] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 6.878] (==) NOUVEAU(0): RGB weight 888
[ 6.878] (==) NOUVEAU(0): Default visual is TrueColor
[ 6.878] (==) NOUVEAU(0): Using HW cursor
[ 6.878] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 6.878] (==) NOUVEAU(0): Page flipping enabled
[ 6.878] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 6.878] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 6.878] (II) NOUVEAU(0): Initializing outputs ...
[ 6.935] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
[ 6.965] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 6.967] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[ 7.134] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Manufacturer: SAM Model: 5c8 Serial#: 1129132596
[ 7.134] (II) NOUVEAU(0): Year: 2009 Week: 46
[ 7.134] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.134] (II) NOUVEAU(0): Digital Display Input
[ 7.134] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 7.134] (II) NOUVEAU(0): Gamma: 2.20
[ 7.134] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.134] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.134] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.134] (II) NOUVEAU(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[ 7.134] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329
[ 7.134] (II) NOUVEAU(0): Supported established timings:
[ 7.134] (II) NOUVEAU(0): 640x480@60Hz
[ 7.134] (II) NOUVEAU(0): 800x600@56Hz
[ 7.134] (II) NOUVEAU(0): 800x600@60Hz
[ 7.134] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.134] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.134] (II) NOUVEAU(0): Supported standard timings:
[ 7.134] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.134] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.134] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.134] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.134] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.134] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 7.134] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.134] (II) NOUVEAU(0): Serial No: H9XSB06266
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 7.134] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 7.134] (II) NOUVEAU(0): EDID (in hex):
[ 7.134] (II) NOUVEAU(0): 00ffffffffffff004c2dc80534324d43
[ 7.134] (II) NOUVEAU(0): 2e13010380341d782aeed1a555489b26
[ 7.134] (II) NOUVEAU(0): 1250542308008100814081809500a940
[ 7.134] (II) NOUVEAU(0): b30001010101023a801871382d40582c
[ 7.134] (II) NOUVEAU(0): 450009252100001e000000fd00383c1e
[ 7.134] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 7.134] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.134] (II) NOUVEAU(0): 00483958534230363236360a20200111
[ 7.134] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
[ 7.134] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
[ 7.134] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
[ 7.134] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
[ 7.134] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
[ 7.134] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
[ 7.134] (II) NOUVEAU(0): 00000000000000000000000000000000
[ 7.134] (II) NOUVEAU(0): 0000000000000000000000000000005e
[ 7.134] (II) NOUVEAU(0): Not using mode "1920x1080" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "1280x720" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "720x576" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.164] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Manufacturer: SAM Model: 4de Serial#: 1129132595
[ 7.164] (II) NOUVEAU(0): Year: 2009 Week: 6
[ 7.164] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.164] (II) NOUVEAU(0): Digital Display Input
[ 7.164] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 7.164] (II) NOUVEAU(0): Gamma: 2.20
[ 7.164] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.164] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.164] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.164] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 7.164] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 7.164] (II) NOUVEAU(0): Supported established timings:
[ 7.164] (II) NOUVEAU(0): 640x480@60Hz
[ 7.164] (II) NOUVEAU(0): 800x600@56Hz
[ 7.164] (II) NOUVEAU(0): 800x600@60Hz
[ 7.164] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.164] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.164] (II) NOUVEAU(0): Supported standard timings:
[ 7.164] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.164] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.164] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.164] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.164] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.164] (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.164] (II) NOUVEAU(0): Supported detailed timing:
[ 7.164] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 477 x 268 mm
[ 7.164] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 7.164] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 7.164] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
[ 7.164] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.164] (II) NOUVEAU(0): Serial No: H9XS201897
[ 7.164] (II) NOUVEAU(0): EDID (in hex):
[ 7.164] (II) NOUVEAU(0): 00ffffffffffff004c2dde0433324d43
[ 7.164] (II) NOUVEAU(0): 0613010380331d782aee91a3544c9926
[ 7.164] (II) NOUVEAU(0): 0f50542308008100814081809500b300
[ 7.164] (II) NOUVEAU(0): a940010101011a3680a070381f403020
[ 7.164] (II) NOUVEAU(0): 3500dd0c1100001a000000fd00383d1e
[ 7.164] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053
[ 7.164] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.164] (II) NOUVEAU(0): 00483958533230313839370a2020008b
[ 7.164] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.164] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.166] (II) NOUVEAU(0): EDID for output HDMI-1
[ 7.270] (II) NOUVEAU(0): EDID for output DP-1
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 7.270] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 7.270] (II) NOUVEAU(0): Output DP-1 disconnected
[ 7.270] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.270] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 7.270] (**) NOUVEAU(0): Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.270] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.270] (==) NOUVEAU(0): DPI set to (96, 96)
[ 7.270] (II) Loading sub module "fb"
[ 7.270] (II) LoadModule: "fb"
[ 7.270] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.272] (II) Module fb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (II) Loading sub module "shadowfb"
[ 7.272] (II) LoadModule: "shadowfb"
[ 7.272] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 7.272] (II) Module shadowfb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (--) Depth 24 pixmap format is 32 bpp
[ 7.278] (II) NOUVEAU(0): Channel setup complete.
[ 7.279] (II) NOUVEAU(0): [COPY] async initialised.
[ 7.280] (II) NOUVEAU(0): [DRI2] Setup complete
[ 7.280] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 7.280] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 7.281] (II) Loading sub module "exa"
[ 7.281] (II) LoadModule: "exa"
[ 7.281] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 7.281] (II) Module exa: vendor="X.Org Foundation"
[ 7.281] compiled for 1.16.1, module version = 2.6.0
[ 7.281] ABI class: X.Org Video Driver, version 18.0
[ 7.281] (II) EXA(0): Driver allocated offscreen pixmaps
[ 7.281] (II) EXA(0): Driver registered support for the following operations:
[ 7.281] (II) Solid
[ 7.281] (II) Copy
[ 7.281] (II) Composite (RENDER acceleration)
[ 7.281] (II) UploadToScreen
[ 7.281] (II) DownloadFromScreen
[ 7.281] (==) NOUVEAU(0): Backing store enabled
[ 7.281] (==) NOUVEAU(0): Silken mouse enabled
[ 7.282] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 7.282] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 7.282] (**) NOUVEAU(0): DPMS enabled
[ 7.282] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.282] (--) RandR disabled
[ 7.363] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.363] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.363] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.363] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.363] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 7.363] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 7.363] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.363] (II) AIGLX: Loaded and initialized nouveau
[ 7.363] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.365] (II) NOUVEAU(0): NVEnterVT is called.
[ 7.420] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 7.420] resize called 1920 1080
[ 7.445] (II) Using input driver 'evdev' for 'Logitech-Illuminated'
[ 7.445] (**) Option "CoreKeyboard"
[ 7.445] (**) Logitech-Illuminated: always reports core events
[ 7.445] (**) evdev: Logitech-Illuminated: Device: "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
[ 7.503] (--) evdev: Logitech-Illuminated: Vendor 0x46d Product 0xc318
[ 7.503] (--) evdev: Logitech-Illuminated: Found keys
[ 7.503] (II) evdev: Logitech-Illuminated: Configuring as keyboard
[ 7.503] (II) XINPUT: Adding extended input device "Logitech-Illuminated" (type: KEYBOARD, id 6)
[ 7.503] (**) Option "xkb_rules" "evdev"
[ 7.503] (**) Option "xkb_model" "pc104"
[ 7.503] (**) Option "xkb_layout" "fr"
[ 7.513] (II) Using input driver 'evdev' for 'Logitech-G100S'
[ 7.513] (**) Option "CorePointer"
[ 7.513] (**) Logitech-G100S: always reports core events
[ 7.513] (**) evdev: Logitech-G100S: Device: "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
[ 7.583] (--) evdev: Logitech-G100S: Vendor 0x46d Product 0xc247
[ 7.583] (--) evdev: Logitech-G100S: Found 12 mouse buttons
[ 7.583] (--) evdev: Logitech-G100S: Found scroll wheel(s)
[ 7.583] (--) evdev: Logitech-G100S: Found relative axes
[ 7.583] (--) evdev: Logitech-G100S: Found x and y relative axes
[ 7.583] (II) evdev: Logitech-G100S: Configuring as mouse
[ 7.583] (II) evdev: Logitech-G100S: Adding scrollwheel support
[ 7.583] (**) Option "Emulate3Buttons" "no"
[ 7.583] (**) evdev: Logitech-G100S: YAxisMapping: buttons 4 and 5
[ 7.583] (**) evdev: Logitech-G100S: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.583] (II) XINPUT: Adding extended input device "Logitech-G100S" (type: MOUSE, id 7)
[ 7.583] (II) evdev: Logitech-G100S: initialized for relative axes.
[ 7.583] (**) Logitech-G100S: (accel) keeping acceleration scheme 1
[ 7.583] (**) Logitech-G100S: (accel) acceleration profile 0
[ 7.583] (**) Logitech-G100S: (accel) acceleration factor: 2.000
[ 7.583] (**) Logitech-G100S: (accel) acceleration threshold: 4
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.584] (**) Video Bus: always reports core events
[ 7.584] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 7.584] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.584] (--) evdev: Video Bus: Found keys
[ 7.584] (II) evdev: Video Bus: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
[ 7.584] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event23)
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.585] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.585] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event23"
[ 7.585] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found x and y relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found absolute axes
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Forcing absolute x/y axes to exist.
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found keys
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as mouse
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as keyboard
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Adding scrollwheel support
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: YAxisMapping: buttons 4 and 5
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.2/0003:046D:C52B.0006/0003:046D:C52B.0008/input/input26/event23"
[ 7.586] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4024" (type: KEYBOARD, id 11)
[ 7.586] (**) Option "xkb_rules" "evdev"
[ 7.586] (**) Option "xkb_model" "pc104"
[ 7.586] (**) Option "xkb_layout" "fr"
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: initialized for relative axes.
[ 7.586] (WW) evdev: Logitech Unifying Device. Wireless PID:4024: ignoring absolute axes.
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) keeping acceleration scheme 1
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration profile 0
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration factor: 2.000
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration threshold: 4
[ 7.586] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.586] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 7.586] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 7.630] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 7.630] (II) UnloadModule: "evdev"
[ 7.630] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event25)
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "system-keyboard"
[ 7.630] (II) Using input driver 'evdev' for 'HD Webcam C525'
[ 7.630] (**) HD Webcam C525: always reports core events
[ 7.630] (**) evdev: HD Webcam C525: Device: "/dev/input/event25"
[ 7.630] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
[ 7.630] (--) evdev: HD Webcam C525: Found keys
[ 7.630] (II) evdev: HD Webcam C525: Configuring as keyboard
[ 7.630] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.2/input/input28/event25"
[ 7.630] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 12)
[ 7.630] (**) Option "xkb_rules" "evdev"
[ 7.630] (**) Option "xkb_model" "pc104"
[ 7.630] (**) Option "xkb_layout" "fr"
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event24)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js1)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event22)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.631] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.631] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.631] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
[ 7.631] (WW) evdev: Logitech Logitech Illuminated Keyboard: device file is duplicate. Ignoring.
[ 7.663] (EE) PreInit returned 8 for "Logitech Logitech Illuminated Keyboard"
[ 7.663] (II) UnloadModule: "evdev"
[ 7.663] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.663] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C318.0002/input/input23/event20"
[ 7.663] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 13)
[ 7.663] (**) Option "xkb_rules" "evdev"
[ 7.663] (**) Option "xkb_model" "pc104"
[ 7.663] (**) Option "xkb_layout" "fr"
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 7.663] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 7.663] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/event21)
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.664] (II) Using input driver 'evdev' for 'Logitech G100s Optical Gaming Mouse'
[ 7.664] (**) Logitech G100s Optical Gaming Mouse: always reports core events
[ 7.664] (**) evdev: Logitech G100s Optical Gaming Mouse: Device: "/dev/input/event21"
[ 7.664] (WW) evdev: Logitech G100s Optical Gaming Mouse: device file is duplicate. Ignoring.
[ 7.690] (EE) PreInit returned 8 for "Logitech G100s Optical Gaming Mouse"
[ 7.690] (II) UnloadModule: "evdev"
[ 7.690] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/mouse0)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.691] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 7.691] (II) No input driver specified, ignoring this device.
[ 7.691] (II) This device may have been added with another device file.
[ 14.821] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 14.821] (II) NOUVEAU(0): Using hsync ranges from config file
[ 14.821] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 14.821] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.821] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.963] resize called 3840 1080
[ 15.466] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.466] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.466] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.466] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.466] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.747] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.747] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.747] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.747] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.747] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.947] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.947] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.947] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.947] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.947] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.180] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.180] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.180] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.180] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.180] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.398] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.398] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.398] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.398] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.398] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.705] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.705] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.705] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.705] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.705] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 3613.510] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4024
[ 3613.557] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Close
[ 3613.557] (II) UnloadModule: "evdev"
[ 3613.617] (II) config/udev: removing device HD Webcam C525
[ 3613.647] (II) evdev: HD Webcam C525: Close
[ 3613.647] (II) UnloadModule: "evdev"
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event23)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.989] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3614.989] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3614.989] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 3614.989] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 3615.023] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 3615.023] (II) UnloadModule: "evdev"
[ 3615.023] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event22)
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3615.023] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3615.023] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event22"
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 3615.02shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
management. It means LightDM van load seats automatically as they are added
from logind.
Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation -
HAL seems to have broken after update. (SOLVED)
I'm not sure what happened, but after updating arch recently CD's, DVD's, and USB drives/sticks are not available. They "seem" to mount themselves as before, as they show up in gnome, but they are inacessible, clicking on any icon for them brings nothing up.
Sorry for the cryptic nature of this post, I'm not even sure where to begin looking in the logs for whatever error/warning might point me in the right direction. Can someone kindly tell me what I should be checking to resolve this? Thanks!
Last edited by jeremyrainman (2009-04-18 15:32:26)Using a:
$ hald --daemon=no --verbose=yes
I get lots and lots and lots of verbage. HAL is running fine apparently, as it's monitoring my UPS just fine
Here's what I get when I try to open a USB drive that is attached and has an icon in gnome:
08:06:21.680 [W] ci-tracker.c:366: Error doing GetSessionForUnixProcess on ConsoleKit: org.freedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '9060'
08:06:21.680 [i] hald_dbus.c:5176: OK for method 'Mount' with signature 'ssas' on interface 'org.freedesktop.Hal.Device.Volume' for UDI '/org/freedesktop/Hal/devices/volume_uuid_9C24133024130CC0' and execpath 'hal-storage-mount'
08:06:21.680 [i] hald_dbus.c:4062: no need to enqueue
Run started hal-storage-mount (0) (1)
! full path is '/usr/lib/hal/hal-storage-mount', program_dir is '/usr/lib/hal'
9061: XYA attempting to get lock on /media/.hal-mtab-lock
9061: XYA got lock on /media/.hal-mtab-lock
device = /dev/sdb1
invoked by uid = 1000
invoked by system bus connection = :1.193
label 'FreeAgent Drive' uuid '9C24133024130CC0'
Looking at /etc/fstab entry 'none'
/etc/fstab: device none -> none
Looking at /etc/fstab entry 'none'
/etc/fstab: device none -> none
Looking at /etc/fstab entry '/dev/cdrom'
/etc/fstab: device /dev/cdrom -> /dev/dev/cd/cdrom-6:0:0:0
Looking at /etc/fstab entry '/dev/dvd'
/etc/fstab: device /dev/dvd -> /dev/dev/cd/dvd-6:0:0:0
Looking at /etc/fstab entry '/dev/fd0'
/etc/fstab: device /dev/fd0 -> /dev/fd0
Looking at /etc/fstab entry '/dev/sda1'
/etc/fstab: device /dev/sda1 -> /dev/sda1
Looking at /etc/fstab entry '/dev/sda2'
/etc/fstab: device /dev/sda2 -> /dev/sda2
Looking at /etc/fstab entry '/dev/sda3'
/etc/fstab: device /dev/sda3 -> /dev/sda3
mount_point = 'FreeAgent Drive'
mount_fstype = ''
mount_options = 'locale=LC_CTYPE=en_US.utf8;LC_NUMERIC=en_US.utf8;LC_TIME=en_US.utf8;LC_COLLATE=C;LC_MONETARY=en_US.utf8;LC_MESSAGES=en_US.utf8;LC_PAPER=en_US.utf8;LC_NAME=en_US.utf8;LC_ADDRESS=en_US.utf8;LC_TELEPHONE=en_US.utf8;LC_MEASUREMENT=en_US.utf8;LC_IDENTIFICATION=en_US.utf8 '
trying dir /media/FreeAgent Drive
given_options[0] = 'locale=LC_CTYPE=en_US.utf8;LC_NUMERIC=en_US.utf8;LC_TIME=en_US.utf8;LC_COLLATE=C;LC_MONETARY=en_US.utf8;LC_MESSAGES=en_US.utf8;LC_PAPER=en_US.utf8;LC_NAME=en_US.utf8;LC_ADDRESS=en_US.utf8;LC_TELEPHONE=en_US.utf8;LC_MEASUREMENT=en_US.utf8;LC_IDENTIFICATION=en_US.utf8'
allowed_options[0] = 'locale='
allowed_options[1] = 'dmask='
allowed_options[2] = 'fmask='
allowed_options[3] = 'ro'
allowed_options[4] = 'sync'
allowed_options[5] = 'dirsync'
allowed_options[6] = 'noatime'
allowed_options[7] = 'nodiratime'
allowed_options[8] = 'noexec'
allowed_options[9] = 'quiet'
allowed_options[10] = 'remount'
allowed_options[11] = 'exec'
using action org.freedesktop.hal.storage.mount-removable for uid 1000, system_bus_connection :1.193
08:06:21.695 [i] device.c:1894: Removing locks from ':1.195'
08:06:21.695 [i] device.c:1894: Removing locks from ':1.194'
pid 9061: rc=1 signaled=0: /usr/lib/hal/hal-storage-mount
08:06:21.696 [i] hald_dbus.c:4086: No more methods in queue
08:06:21.696 [i] hald_dbus.c:4149: failed with 'org.freedesktop.Hal.Device.PermissionDeniedByPolicy' 'org.freedesktop.hal.storage.mount-removable no <-- (action, result)'
08:06:21.696 [D] hotplug.c:453: events queued = 0, events in progress = 0
08:06:21.696 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
08:06:21.784 [i] device.c:1894: Removing locks from ':1.197'
08:06:21.788 [i] ci-tracker.c:212: Removing CICallerInfo object for :1.193
08:06:21.788 [i] device.c:1894: Removing locks from ':1.193'
[9056]: 08:06:25.013 [i] addon-storage.c:354: Checking whether device /dev/sr0 is locked on HAL
[9056]: 08:06:25.013 [i] addon-storage.c:362: ... device /dev/sr0 is not locked on HAL
08:06:51.791 [i] device.c:1894: Removing locks from ':1.196'
I tried looking up org.freedesktop.Hal.Device.PermissionDeniedByPolicy and couldn't find anything. Any suggestions? -
Not possible to stop e-mail synchronization after update to 4.0
With version 2.3 I was able to stop the syncronization of a Microsoft Exchange e-mail account configured as Automatic (Push) just stopping general synchronization with an external application like Free Power Widget. With version 4.0 the e-mail account is updated no matter the general synchronization is on or off. Anything else to configure?
I don't think there is any setting you can do in the phone to "solve" this. I'd suggest that you take those extra few seconds to do the two steps, unless you find a working 3rd party widget .
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Maybe you are looking for
-
What's a good video app to use? I have iPhoto and iMovie, but it these wont let me do certain things, such as email a video. I also want to be able to make a dvd of my home movies. Any suggestions?
-
Apple tv streaming from a webside ?
I just got a apple tv and I like to know if I'm watching a movie on a webside with my iMac can I move that to my tv using apple tv? Thanx
-
Making a file the smallest possible
I have a 48 minute podcast. How can I make that file the smallest possible for transferring the data? It has voice and music.
-
Installing HP Deskjet 820Cse on Windows 7
My HP DeskJet 820Cse has been a GREAT reliabile printer for many years. Unfortunately, I cannot get it to run on my Windows 7 computer. Since my computer doesn't have a serial printer port, I'm using a serial to USB connector/adapter. I'm wonder
-
When creating Assets via AS91 (Legacy Asset Creation) we are having trouble getting the revaluation keys to come across. The system issues an error message for our revaluation areas saying we need to provide a depreciation start date and an expire