Mail cannot be enabled at this time wait a moment and the try turning on mail again

So my icloud and apple store account just stopped accepting my old password.
This included my iphone, apple tv, macbook air and my wife's ipad
I resent my password
Updated all the accounts and all seems to be good with the exception of the OSX Mail client
That seems to be an issue connecting to icloud
The following works and/or are syncing under System Preferences -> Mail Contacts and Calendars
Contacts
Calendars & Reminders
Notes
Safari
Photo Stream
Document & Data
Find My Mac
*I've never tried to enable Back to My Mac nor do I want to
Mail gives the following error: mail cannot be enabled at this time wait a moment and the try turning on mail again
I've enable my mail again by adding my icloud again as a separate account to Mail Contacts and Calendars
     Weird thing is it only has mail and notes as options.
     I know this fix is a temporary hack, and I'd like to get a permanent solution
     I've also been checking my credit card linked to the account pretty obsessively to see if theres any issue on that end. No problems so far.
FYI - Running mountain lion and currently in Philadelphia
Message was edited by: vnitla

Sorry, don't know how to delete the post.
Message was edited by: vnitla

Similar Messages

Notes can't be enabled at this time. Wait a moment and then try turning on Notes again."

I have yet to resolve this issue. iPhone 4S works fine with iCloud.
Thus far I have done the following.
- reinstalled OS; basically an archive an install from the bootup menu.
- pram reset
- smc reset (power cycle)
- single user mode
- repaired disk and permissions in disk utility
- trashing system preferences plist from user library & cache folders from system and user libraries; rebooting then emptying the trash
- changing icloud password; then updated everywhere it was used
- opened ports on router; 993,480, 143, & 80; network is WPA with 10 digit numerical passphrase, no firewalls or antivirus on router
- removing and readding iCloud account to mail application
- mail also doesn't work and never has with my icloud account. I know it is a separate issue but mail connection doctor prompts:
"could not connect to this iCloud IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. if is does not, deselect "Use SSL" checkbox in teh Advanced tab of Account preferences"
*Needs to be 'imap.mail.me.com" No matter how many times I remove or re-add the iCloud account, mail will prompt needs an incoming mail server. It will not let me put it in there, just has a 'mail.example.com'
On 10.6.8 I used to be able to move mailboxes to desktop, delete everything in mail folder, reboot, put back mail boxes and everything so as to really reset the mail application, but ML looks like it has disabled that as a troubleshooting feature... *but I guess the resintallation of of ML does the same..
The only logical explaination I can think of which would be in congruence with the mail issue, is that iCloud has messed up the location of where my all data is on the server... and there is not a way to fix it. I'm considering creating a whole new Apple ID but that is my last resort.
Please anyone who can help, I would appreciate very much.
Thanks.

Thank you for the reply. I am on a home network. ISP is centurylink DSL service located in midwest, so USA. WPA security type with 10 digit numerical password. I verified IMAP does work on my network, my gmail account adds perfectly fine in mail on the mac. I also checked that there is not a proxy server setup. *this has been occuring in all 3 of the places I have lived in the past 5 years or so, no matter the ISP.
What is really bizarre is my iphone 4s works fine with everything. Notes sync with icloud. Mail syncs with my icloud and gmail accounts fine. The iphone is also connecting to the same wireless network. Another thing, my iphone works with a hotmail account too, which is POP (dang microsoft), but I wonder why apple won't let it work on mail on the macs.

"Notes cannot be enabled at this time" on iCloud

Hi there
Has anyone experienced this message on their MacBook Air when turning on iCloud?
All the other apps that syncronise across iCloud are fine but when I click on the Notes tick-box, I get a message
"Notes cannot be enabled at this time, please try again later".
Well, I've tried on numerous occasions and deactivated iCloud and reinstalled it, all to no avail.
iCloud works on my other devices and Notes does syncronise between my iphone and ipad.
Any ideas?
Thanks.

On your MB Air ... open System Preferences > iCloud
Deselect the box next to Notes then reselect it.
Give iCloud a few minutes to re sync the data.
BTW, you can check iCloud system status anytime > Apple - Support - System Status

Error appears: Cannot send message. this message cannot be sent at this time - has been appearing everytime i try to send e-mail for the past week!

For the past week I have not been able to send both simple and attached messages through my icloud e-mail.
The error reads: this message cannot be sent at this time. i have the latest version of Firefox, I have even changed my password in hopes that this would resolve the issue, but alas, it hasn't worked. HELP!

This is a terrible customer experience for Apple users. I have been dealing with this same issue since April 2012; all used to work just fine and then suddenly -- "Cannot send message" error appears.
When is Apple going to fix this? I have two iPads and an iPhone but often need to access files from my PC (next time, it'll be a Mac),
Very frustrating.

This content cannot be selected at this time.

when I will go in to the store, I can see the special offers and so on, but when I shall go in to see all games, this comes up "This content cannot be selected at this time" it have been like this in several hours now, and I am tierd of it....I live in sweden

I keep getting "This content cannot be selected at this time" trying to navigate through the store. I found out about this when I attempted to purchase Demon's Souls by clicking on the game page only for it to show this message, after that I realised it wasn't just the one game, it was multiple games giving me this error. I also attempted to try my luck on my laptop by going to the PS store with my chrome browser, it gave basically the same error with a different message. I've been using my PS3 system since 2011 and I've never had this problem. I also don't have a "Walmart connection" so to speak. Yet now, just going on the store is making my PS3 system have a 50/50 chance of crashing. I've looked everywhere but can't find an answer to this issue. Any help would be greatly appreciated for me and anyone else who has the same problem I'm sure.

Content cannot be loaded at this time

After purchasing a move, when I try to watch I get the following
This content cannot be loaded at this tome. try again later

I keep getting "This content cannot be selected at this time" trying to navigate through the store. I found out about this when I attempted to purchase Demon's Souls by clicking on the game page only for it to show this message, after that I realised it wasn't just the one game, it was multiple games giving me this error. I also attempted to try my luck on my laptop by going to the PS store with my chrome browser, it gave basically the same error with a different message. I've been using my PS3 system since 2011 and I've never had this problem. I also don't have a "Walmart connection" so to speak. Yet now, just going on the store is making my PS3 system have a 50/50 chance of crashing. I've looked everywhere but can't find an answer to this issue. Any help would be greatly appreciated for me and anyone else who has the same problem I'm sure.

Content editor webpart error "cannot retrieve properties at this time"

Hi,
Everytime I try to editor content within the content editor web part I receive the error message "cannot retrieve properties at this time".
I can edit the content within the web part when I use http. The error only seems to occur to when using https and SSL.
I've looked at the following web site and KB articles to implement a workaround however still get the same error.
http://support.microsoft.com/default.aspx/kb/912060
http://www.sharepointblogs.com/agoodwin/archive/2007/09/03/content-editor-webpart-error-quot-cannot-retrieve-properties-at-this-time-quot.aspx
http://support.microsoft.com/kb/830342
Can anyone else suggest anything else?

My symptoms
1. CEWP & Sharepoint Designer could not retrieve data.
2. Event id 5000 "ulsexception12,p1 w3wp.exe ..."
Problem
1. Upgraded Small Farm WSS and SPS 2007 to SP2.
2. Unhandled exceptions and access denieds int the uls logs no specifics to run down.
3. Crawl issues and had to reset the crawl index.
Solution
1. ASPNet user account had certain rights stripped by gpo, check your permission with Tech Net "IIS and Built-in Accounts 6.0" or I found a much easier product to use Mircrosofts "Authentication & Access Control Diagnostics 1.0"
2. Ran the "stsadm -o sync -listolddatabases 0" to check for unsyn'd databases then ran the "stsadm -o sync deleteolddatabases 0" to clear those databases.
Havn't seen any further issues, this was a tuff nut to crack hope this helps someone else.jellywood

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

HT1212 My iPad was locked & disabled & tried every possible way to restore but nothing is working - After select Restore, & waited for updates to finish, gets iPad Cannot be resotred at this time because server could not be contacted - Pls help

Friends,
My iPad2 was locked and disabled because my kids entered several times the passcode and now it is locked. I tried every possible ways and read all related items and followed precisely articel http://support.apple.com/kb/HT1212 but after i restored and update teh iPad, itunes keeps giveing me the same message:
The iPad "iPad" cannot be restored at this time because the iPad software update server could not becontacted or is temporarily unavailable.
I tired at different time of teh day and noght and different days yet kept getting the same message.
Pls assist me as now the iPad is useless
Regards,
Joe

If reset doesn't work, try and force the iPad into Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Since upgrading to ios7, apps just say waiting and then get the app cannot be downloaded at this time message. We run a proxy server, devices running ios6 have no problems. Anyone know what the problem is? I think apple just needs to fix its new OS.

I work at a school running 10 iPads. We connect to the internet through a proxy server. Prior to iOS7 we had no issues, the devices still on iOS6 work perfectly.
All devices which have been upgraded to iOS7 cannot download apps. I can find the apps in the store, choose to download them, but the icon hangs for a while before returning the "app cannot be downloaded at this time message". Help.

I have this same exact issue. We have even put all apple servers as not even being filtered by proxy and it still wont download anything. Nor will it let us even log in or create a new acct in the app store. It seems its also not just app store related....as it won't even let you check for IOS updates when a proxy is entered.
If anyone has any ideas let us know!

"this alias cannot be saved at this time"

I've been trying to add an alias to my icloud account since september.
I have 2 of 3 available.
it should work.
But every time I try it said "this alias cannot be saved at this time"
The only answers I've found in these forums is "icloud is still being rolled out, just wait"
That's not an acceptable answer, especially since I got the official email that my icloud was active, months ago.
There must be another answer!
Anyone?

SuperSelrak wrote:
But on the iCloud Web server, it only suggests or enables the creation of @icloud.com aliases already, no more @me.com !
That's so, but you won't be able to create a new alias until your account is updated. There's no way of knowing how long this will take: you should get an email telling you when this is done (though I didn't) but you could check by sending yourself a message to [email protected] from time to time. When it stops bouncing you may be good to go with the aliases.

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

ORA-00376: file 2 cannot be read at this time

Hi,
Our SAP system is down. When checked I found PSAPUNDO tablespace needs recovery. (From SYSSMU1$ to SYSSMU10$ NEEDS RECOVERY and SYSSMU11$ to SYSSMU17$ are offline).
So I have created another tablespace PSAPUNDO2 and altered the system.
SQL >create undo tablespace PSAPUNDO2 datafile 'D:\Oracle\SOL\sapdata1\undo_2\UNDO.DATA2' size 700MB;
SQL>alter system set undo_tablespace=PSAPUNDO2 scope=spfile;
I have changed undo_management to Manual. And I have not dropped old tablespace PSAPUNDO yet,
I have restarted the system and initially the database was not open.
I gave command alter database open and opened it.
The oracle has been started normally. But still SAP instance cannot be started.
Last few lines of aler log:
Sun Jan 06 04:05:12 2013
Completed: ALTER DATABASE OPEN
Sun Jan 06 04:06:08 2013
Shutting down archive processes
Sun Jan 06 04:06:13 2013
ARCH shutting down
ARC2: Archival stopped
Adjusting the default value of parameter parallel_max_servers
from 160 to 65 due to the value of parameter processes (80)
Sun Jan 06 04:06:29 2013
Starting ORACLE instance (normal)
Sun Jan 06 04:14:09 2013
Errors in file d:\oracle\sol\saptrace\background\sol_smon_3796.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-00376: file 2 cannot be read at this time
ORA-01110: data file 2: 'D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1'
Now when i give command:
show parameter undo, I got the table_space name as PSAPUNDO2.But if I give command
SQL> select segment_name,owner,tablespace_name,status from dba_rollback_segs;
I am getting PSAPUNDO as the tablespace insteadof PSAPUNDO2. PSAPUNDO tablespace needs recovery. (From SYSSMU1$ to SYSSMU10$ NEEDS RECOVERY and SYSSMU11$ to SYSSMU17$ are offline).
Also
In BRTOOLS, in show tablespace command I cannot see the new tablespace PSAPUNDO2.
Kindly suggest how to resolve this issue.

Hi,
Thanks for your reply. When I checked SAP down issue(around 6th Dec) I had exteneded the tablespace PSAPUNO and PSAPSR3 with brtools and restarted the server.
Then I checked further and found the problem was PSAPUNDO needs recovery.
Then I created another tablespace PSAPUNDO2 and altered system. (See my previous post).
Now as you told I checked alert log history to check when the problem started and found the following:
Incremental checkpoint up to RBA [0x2aad.15fb6.0], current log tail at RBA [0x2aad.15ff4.0]
Sun Dec 02 19:01:16 2012
Beginning log switch checkpoint up to RBA [0x2aae.2.10], SCN: 179359877
Thread 1 advanced to log sequence 10926
Current log# 2 seq# 10926 mem# 0: D:\ORACLE\SOL\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 10926 mem# 1: C:\ORACLE\SOL\MIRRLOGB\LOG_G12M2.DBF
Sun Dec 02 19:06:21 2012
Completed checkpoint up to RBA [0x2aae.2.10], SCN: 179359877
Sun Dec 02 19:25:04 2012
Incremental checkpoint up to RBA [0x2aae.2d36.0], current log tail at RBA [0x2aae.2e11.0]
Sun Dec 02 19:30:00 2012
KCF: write/open error block=0x19 online=1
file=2 D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1
error=27072 txt: 'OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.'
Automatic datafile offline due to write error on
file 2: D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1
Sun Dec 02 19:30:01 2012
Errors in file d:\oracle\sol\saptrace\usertrace\sol_ora_5408.trc:
ORA-00376: file 2 cannot be read at this time
ORA-01110: data file 2: 'D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1'
ORA-00376: file 2 cannot be read at this time
I am not sure what caused this error: ORA-00376: file 2 cannot be read at this time
I think there is no issue with Parallel_Max_Server as I can see its entry in Alert log since 2007.
Thu Oct 25 20:48:48 2007
Adjusting the default value of parameter parallel_max_servers
from 160 to 65 due to the value of parameter processes (80)
Thu Oct 25 20:48:48 2007
Starting ORACLE instance (normal)
Will wait for your reply.
Edited by: 980149 on Jan 6, 2013 9:32 AM

ORA-00376: file 30 cannot be read at this time

hi
iam new for appsdba
iam facing the below problem can any one help me.
[appldev@ebs idev_ebs]$ ./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.16
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adapcctl.sh start
script returned:
adapcctl.sh version 115.47
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
Starting Apache Web Server Listener (dedicated HTTP) ...
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
Starting Apache Web Server Listener (dedicated PLSQL) ...
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adalnctl.sh start
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_idev.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adcmctl.sh start
script returned:
You are running adcmctl.sh version 115.24
Starting concurrent manager for idev ...
Starting idev_0628@idev Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adfrmctl.sh start
script returned:
You are running adfrmctl.sh version 115.37
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
Starting forms server for idev on port 9080.
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
adfrmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adrepctl.sh start
script returned:
You are running adrepctl.sh version 115.31
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
starting Reports Server for idev on port 7080.
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
adrepctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adfmcctl.sh start
script returned:
You are running adfmcctl.sh version 115.19
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
Starting forms load balancing client for idev.
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
adfmcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adfmsctl.sh start
script returned:
You are running adfmsctl.sh version 115.15
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
starting forms metrics server for idev.
ORACLE error 376 in afpgdbcf
Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
ORA-06512: at "APPS.FND_CORE_LOG", line 22
ORA-06512: at "APPS.FND_PROFILE", line 99
ORA-06512: at "APPS.FND_WEB_CONFIG", line .
The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
adfmsctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 115.16
Validating Fulfillment patch level via /devc/p01/oracle/pixcomn/java
Fulfillment patch level validated.
Starting Fulfillment Server for idev on port 9380 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services for this node are started.
Check logfile /devc/p01/oracle/pixcomn/admin/log/idev_ebs/06280212.log for details
Exiting with status 0
[appldev@ebs idev_ebs]$

You are trying to access objects of that perticular datafiles.
If you want to access either you need to perform recovery, you should have all the archives of all those when datafiles put offline.
Or you should not try to access the objects such resides in that tablespace.
If you perform offline or offline drop. Next time you can face problems like object does not exist.

Messages cannot be displayed at this time... am I missing something?

In order to use my mail, I now have to use the browser instead of my mail application because of the new "upgrade". Unfortunately, my online mailbox keeps blacking out saying that my messages more than a week old cannot be displayed at this time. Any reason as to why? I cannot upgrade to Lion because I use software with my clients that is no longer supported in Lion.

I have the same problem - same Mac etc. Can anyone help please

Mail cannot be enabled at this time wait a moment and the try turning on mail again

Similar Messages

Maybe you are looking for