Mail cannot be sent, only received

Mail can only be sent in the shop, where I bought my iPad.

Does your email account provider have an authenticated SMTP server? If not, you will have problems sending with the account.
What is the error message provided?

Similar Messages

  • I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

    I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

    BTW. I have seen posts suggesting age of Mac has an affect. Mine is MacBook Pro (Retina, Mid 2012)
    The mail I am having problems send is Exchange and google mail. The google client I re-installed and this had no affect.

  • I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks in response to Pita Fito I have contacted three more people that made the upgrade and they have the same problem

    I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
    in response to Pita Fito
    I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...

    I can send e-mails just fine with apple mail on yosemite...
    Might not be a generic problem but rather a personal problem..
    You should try find a fix rather than waiting on apple.
    Hopefully somebody can help you out.
    More than happy to help with your settings/preference pain... And compare mine with yours...
    If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
    Is it a gmail or icloud email acount? Can be of more help if it is.

  • The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!

    The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!

    Mail/Preferences/Composing. Do you have the CC myself box checked?

  • My Outgoing IOS E-Mail SMPT says OFFLINE and I cannot send email, only receive.  suggestions please?

    Hello,  My Outgoing IOS e-mail says OFFLINE (SMPT) and I cannot send e-mails, only receive.  Internet connection is fine and my Internet Company says all connections are fine with their server and passwords are good too.  Says issue is with Apple.   Any suggestions please?

    Hello Fab A.,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Mail:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Mail cannot be sent

    I am with 1 und 1 have set everything ok.
    can receive e mails but cannot send.
    error: "receiver was denied by the server"
    What can I do?

    I would delete the account and try entering it again. Another possible problem is that the mail provider only allows sending mail for certain connection in order to help prevent using the account for spam. What type of service is "1 und 1"? Is it also associated with a internet provider?

  • Mails not getting sent from Receiver Mail Channel

    Hi ALL
    I have a File to mail scenario , I see chakred flag in SXMB_MONI ..but mail are not getting triggred from the Receiver mail adapter..
    I gave the URL like this smtp://sxd123.abc.com
    and the respective E-mail ID's
    I dont see any message in the communication channel monitering also ..wht could be the reson.. ?
    Thanks
    Souz

    Hi Dominic,
    Since you are not seeing any entry in the communication channel (receiver), I think there is a problem with your configuration. Check whether you have used the correct channel (of type MAIL) in the receiver agreement.
    Regards
    Suraj

  • Cannot write emails, only receive them?!

    My curve won't let me write emails...I can receive them, but if I try to answer to an email I can choose the option 'answer' but then I don't have any 'send' button... if I try to send a new message, well I can write it and send it, but then it comes back with a red cross...<I was never able to send a mail..Please note I have the phone since 2010 but never cared too much about the problem.Now I'd like  to solve the problem!!
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!!
    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS conduits for the affected email accounts.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why is my e-mails not being sent or received?

    Where are my e-mails?

    Hi!
    Most people have their email service provided a large company like Google (Gmail), Yahoo, Microsoft (Hotmail or Outlook) or similar.
    Do you know which company provides your email service?
    If not, could you please tell us the end portion of your email address (just the part from the @ symbol onwards).
    Thanks!

  • How do you send a video via Gmail? Since upgrading to ios7 on my Ipad, ican't send .can only receive on the Mail.Can do both on Gmail but when I go on attatch it only accesses my pics not my videos

    Since upgrade to ios7, I have not been able to send messages via Mail. I can only receive.I can do both on Gmail but when I try to attatch, it only accesses photos not videos,any idea how I can attatch a video?

    Here's a troubleshooting article from Apple:  iOS: Troubleshooting Mail
    It doesn't seem to cover your specific issue, but have you tried using a different network (either a different wi-fi network, or switching from wi-fi to cellular or vice-versa if you have a wi-fi+cellular iPad)?
    For GMail, iCloud and Yahoo, copies of messages are stored on their respective servers, so you could try deleting the account on your iPad, then re-adding each account one at a time to see if that resolves the issue.

  • Can not send e-mails from account but can receive

    I have my e-mail account with ATT Yahoo.
    I received an account verification notice yesterday from ATT and I responded and they said I was verified.
    However after I did that I could not send e-mails from my Imac desktop but I am receiving them.
    I spend 4 and a half hours, yes 41/2 hours with both Apple Care and ATT and they could not correct the problem. Both discussions were with upper tier support personnel.
    Here are some facts that make this an odd issue:
    (1)
    I have other e-mail boxes from ATT and they can send and receive e-mails.
    (2)
    MY laptop can still send and receive e-mails from the e-mail account that is only receiving with my Imac.
    (3)
    All the settings are exactly the same and both Apple Care and ATT checked them.
    Is there anybody out there that may have an answer ?
    Both Apple Care and ATT blamed each other.
    My concern is that today I received another e-mail trying to verify my e-mail address for another e-mail address from ATT.
    I called ATT and they did not know why, I DID NOT open it up and trashed it.
    ATT has put a filter on my other e-mail accounts and hopefully that will end any problems with them.
    The account that has the issue is my main account and I cannot trust leaving it and am trying to avoid having to change it.
    Greg

    Hi Rachel, For what it will be worth, I was like a dog with a bone about this, so I decided to give it another go. I have success on both boxes. Here is what I did, I warn you now it was a lengthy process. Before you begin download all the upgrade steps from X.5.0 to X.5.6 as single stages ( for me the combo's did not work) and have them ready to use.
    1st Backup all your mail to CD/DVD not on the box. Check for any unsent mails anywhere in the box and then throw out all of the mail bits that are anywhere on the system in any folder. 2nd Install & Archive, 3rd Start up from Install DVD and check/set permissions, reboot. Enter all your ISP details to mail, see if you can send a mail to yourself. If not dump all the mail you tried and the .plists, reboot and install next update in the series, enter all details as before, try and send etc. If this fails dump again and reboot install next update etc.
    I started at X.5.1 and got to vX.5.4 before I got a result in that sys asked me if this server will do, I said yes and I got mail out. The server name was different that was offered but when all was over it showed as the correct one that it should be on port 995. I must add that I had the spinning cog wheel for quite some minutes before anything happened. I continued on this way for the rest of the updates. 1x1 until v.6 was reached. That was only on the G4, I now had to do it all again on the MacPro. This one was not so co-operative in that I had to do it twice, but now it also has Mail running. It is funny though that I had to reach X.5.4 on both machines before it came right. On the G4 I was using a retail disc and on the Intel the supplied for discs.
    Others on here may have a better and quicker way, but for me this did work. I am sure that there is a problem in either the mail app itself or the production of the Master DVD's.
    Whatever, good luck.

  • I can no longer attach files to my outgoing Hotmail emails.  I only receive a message that an  error has occurred. Help appreciated.

    I can no longer attach files to my outgoing Hotmail emails.  I only receive a message where I would expect the Upload to appear that an  error has occurred.
    I am using a MacBook Pro with Retina, 2 Ghz Intel Core i7, OS X 10.9.4
    I have no difficulty attaching files to the outgoing Hotmails on the same account using my iPhone.
    Help appreciated.

    Thanks for this - not an immediate solution I fear but will keep unplugging stuff and restarting stuff.
    To try and be clearer about the problem - I have in the last managed to send attachments successfully.  Now  I can send and receive plain email messages but get the error message when I try to attach an existing file to an email - not just a particular file but it would appear all files are being treated in the same way. 
    An experiment to send a mail to which an attachment has failed to upload got the following message alongside the SEND button
    Files with errors will be removed from the email and not sent.
    - but the mail alone was sent and received successfully.  Thanks for any pointers you can give me. 

  • Help - since 15:00 this afternoon Port 25 timed out and no mail can be sent

    Have been sending and receiving mail all day - suddenly with no warning or reason mail cannot be sent from either my account or my wife's (on the same computer using the same ADSL line. The message is that "This message could not be delivered......The connection "smtp.mac.com" on port 25 timed out. All outgoing mail is blocked.

    Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
    .Mac: Server timeout alert message when sending email

  • TS3276 E-mail cannot receive only send. Help

    E-mail can send only , cannot receive will not accept password. Help

    I have the same problem which started two days ago. Still get emails on my phone and ipad but not on my mac.
    Talktalk, which I use for incoming mail, does not recognise Apple computors so I send using Google.
    This has always been perfect and worked fine untill this last weekend.
    When I check Accounts and select Talktalk I get a message that the password cannot be sent securely.
    Also I notice that the SSL is marked OFF
    Wi Fi connection is good.
    May have to resort to a trip to the Genius Bar at my local Apple store.

  • HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    You are most welcome

Maybe you are looking for

  • Backup of NWDI webdynpro customizations

    Is there a way to backup NWDI webdynpro customizations? I have a query. The webdynpro objects were customized and assembled, thereby creating many 5 KB files of ESS, MSS, PCUI etc. Because of the webdynpro customization, there are hundreds of broken

  • Progress Bars in File Upload Behavours

    Progress Bars in File Upload Behavours would be great.

  • Timeline question

    I am using iMovie HD 5.0.2 (111). The story in my Timeline is complete. Yet the playhead keeps playing for about two extra minutes despite the fact that there are no more clips or audio. It's supposed to stop at the end of the sequence, correct? I th

  • Copy Organisational Structure to Destination System

    Hello Expert, could anyone please let me know how I can copy the assigend OM - Structure to the personal no? My settings in the step: "Transfer selection criteria" Objecttype: P Objectid: 123456 Evalutation Path:P-S-C-O Additiona evaluation path: P-S

  • C# - Excel Interop (Parallel.For)

    Hi All, I had a Excel Macro which i converted into C#. (Interop)  It has 5 different methods for some calculations for report creation. 2 method out of these are running very slow due  to complex calculation. (10 minutes each for 40 mb data) After ch