Mail changes pdf to jpg
When I attach a pdf and send mail, the pdf is changed to a jpg. I need for the recipient to get a pdf, not a jpg. How do I change this?
Hopefully someone form Apple is reading these posts. The inability to set the default to show as icons is an absolute nuisance. At times I have to attach as many as 20 PDFs that are only a few paragraphs. Each one shows as a a full page, resulting in an e-mail that is pages in length. The fact that there is no warning about the implications of the size change is even worse. I learned of it from a customer that was asking why my proposal consisted of a bunch of "teeny" pictures.
This message is written by the principal in a business that is trying to make Apple the prime platform for that business. This type of behavior in handling business attachments renders the Mac a toy. If similar incidents of this magnitude occur the Macs will get turned over to the kids, and while it won't be a pleasant experience, I'll be off to Comp USA to buy a Windows machine.
Similar Messages
-
How to change pdf tp jpg to email?
how to change pdf file created in pages to a jpg file
Is it more than one page? If not, open it in Preview and Save As a jpg file. It can only do one page at a time (the current page showing in Preview) so you would have to do one page at a time doing Save As to multiple jpg's.
At the more powerful end of the spectrum of possible tools there's ImageMagic. -
my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061 -
QuickView: How can I change the default full screen width of PDFs and JPGs
Hello,
I am very happy with the changes on the new OSX Lion. But I have a disappointment form QuickView. On Snow Leopard I will hit the "Option+Space" to QuickView files (mostly pdf and jpg) on full width and just scroll up and down with the mouse or the arrow keys. Now in Lion, when I press "Option+Space" I get the file on full height. This does not work for me because the information on screen is too small and I end up having to open the file on Preview.
How can I change this settings so they are like on Snow Leopard?
Thanks in advance.Not only can you set global values for each of the three columns, but you can also set unique column widths on a per community basis like this:
.ptCommunity-1234 .columnOne { width: 635px; border-right:1px solid #CCCCCC; padding-top: 10px; padding-right: 20px; }
.ptCommunity-1234 .columnTwo { width: 240px; padding-top: 10px; padding-left: 8px;}
You can see here my community #1234 has a wide first column and a more narrow column two and even puts a little solid line between them.
It's all in the stylesheets on your imageserver at the path I mentioned earlier. Again, look at the experience definition object in your admin portal and look at the stylesheet name in the dropbox. The stylesheet name you see is mapped to the .css file using the community-themes.txt file in the same ...yadayada/common/public/css folder on the imageserver.
If you have, lets say, a mainstyle1-en.css that only has about a dozen lines dictating only the few items you mentioned before - then it has been stripped at one time because the default that comes w/ an original install is huge and a great starting point. It even has style tips and snippets in comment blocks to tutor you through its gargantuan variety of options. -
How do I change pdf to a jpg?
How do I change pdf to a jpg?
Adobe Reader cannot do this. Adobe Acrobat can.
Also, there may be some free online convertors out there if you Google them. -
I have adobe reader X. Is there no way to save, print or e-mail changes to a secured pdf? I've inputted changes and have digitally signed, but none of my edits seem to save?
By what kind of security I meant what is allowed and what is not allowed under the security tab that I mentioned in my last post?
You can look at that and see if it restricts what you are trying to do. If it does then yes, you need a version of Acrobat (and the password of course) to change it. -
How can I change an image from .pdf to .jpg
I need to reverse the file in .pdf to it's original .jpg Guys please advise.
Thanks
Josehttp://osxdaily.com/2011/12/13/convert-a-pdf-to-jpg-with-preview-in-mac-os-x/
-
Mail turns PDF attachment into jepg
I use distiller and acrobat to create PDFs from Quark documents; for the last few days, attaching a new PDF to an email in Mail has turned the PDF into a jpeg which PC users can't open. The problem has just cleared itself (without me knowingly doing anything) but it has happened before and I guess may happen again. Any idea of the cause and solution?
What I should have said is Apple should not make the Image Size adjustment an available option when a PDF file is attached to a message.
Yes, this is the answer. Using the term seemed to happen - it either happens or it doesn't but Mail will not and cannot change the file type or the file extension for an attached file without user intervention. Using the Image Size adjustment for a single page PDF file which appears inline or viewed in place within the body of the message does change the file type or file extension for the file from .pdf to .jpg since the Image Size adjustment is intended and can only be used for picture or image file attachments, not with PDF files. -
Exporting multiple e-mails as .pdf
I'm responsible for coordinating a multi-author, book-writing project and I've been asked to store all e-mail correspondences in a fashion that allows all of the authors and project managers to access the e-mails. I have a shared folder set up on my Google drive that allows all the users to access shared files which is working fantastically, but I can't find a way to export large quantities of e-mails at the same time that also works for Google drive.
After a quick Google search I found this site which provided instructions on how to install this set of scripts which allowed me to archive my selected e-mails as .rtf files with their attachments. It works great and allows me to customize the naming of the files to allow other authors to easily locate a specific e-mail. It names each file "From %f to %t - %s - %M %d, %Y.rtf" where %t is the recipient, %f is the sender, %s is the subject/thread topic and %M %d, %Y is Month day, year (eg To John Smith from Jane Doe - Book Project - December 12, 2012.rtf).
Unfortunately, after uploading the folder containing all these .rtf files I found out that .rtf can't be viewed on Google and must be downloaded then opened on the user's computer. To fix this I tried having Google automatically convert the files to Google docs as it uploaded the files, but this didn't work and even if it did I fear the files would lose their attachments.
I then tried searching for scripts that would allow me to change all of the .rtf files to .pdf. I found and tried a few, but they all had problems (the script would only operate on pre Mountain Lion, the requires Word for Mac, etc.)
Then I tried finding a script that would work like the first successful one, but export the files as .pdf rather than .rtf. I couldn't find anything, but found an article that reminded me I could print to .pdf from mail ("Save as PDF..." in the system print window). I tried doing this, but after 'printing' the first of all the e-mails an error box pops up and no more e-mails 'print.' If I "Open PDF in Preview" I can successfully save all of the e-mails as .pdf, but their file names are all Preview of "<e-mail subject>".pdf which isn't helpful because nearly all correspondences in the group have a subject like "Book" or "Book Project" meaning it'd be impossible to determine which e-mail is which by the .pdf filename.
I feel like their are a lot of different routes I can take to solve this problem, I just need help finding the components:
1. Use the first successful script to export as .rtf, then use another script to convert them to .pdf. This would be the best because it will allow me to use a useful filenaming system. To do this I need a script that can convert .rtf to .pdf on my system.
2. Find a script like the first, successful script I used that allows me to export the e-mails as a .pdf using the subject, to/from, etc. as the filename.
3. Open PDF in Preview, save, then use a script to rename all the files by extracting the subject, to/from and date from the .pdfs. To do this I need a script that can find the subject, etc. in the .pdf and use that data to change the file name. (I highly doubt such a script exists and I don't have the script-writing skills to create one myself.)
4. Any other solution that allows me to take a lot of e-mails from my Mail app and upload them to my Google drive while maintaining attachments and generating logical filenames.
5. Any other solution that makes it possible for me to make correspondences available for all authors to access (keeping in mind that cross-platform compatibility is essential).
Suggestions?I found your first suggestion while doing a Google search. That post was made in mid-2011, almost a year before Mountain Lion released. Apple changed the way scripts work in Mountain Lion and this script no longer works.
As far as I can tell, the second solution only works for printing one e-mail to a .pdf at a time and doesn't support batch filenaming. -
Error while sending PO output through mail in PDF format - Urgent
Dear friends,
Developed program to send sapscript output through mail in pdf format, the program running properly, even function module SO_NEW_DOCUMENT_ATT_SEND_API1 returning sy-subrc 0. But the external mail is not going to user lying in SAP outbox with message <b>"Wait for communications service"</b> . SCOT is properly configured, tested mails sending through SAP office.
Find below the source code:
REPORT zmm_porder_gm
NO STANDARD PAGE HEADING.
TABLES: ekko, ekpa, t161t, t052, komv, j_1imocomp, t001, esll.
Internal Tables
DATA : txt LIKE tline-tdline, "HEADER LINE
your_ref LIKE ekko-ihrez, "your ref
our_ref LIKE ekko-unsez, "our ref
mcompname LIKE t001-butxt,
itemname LIKE ekpo-txz01,
del_text LIKE tline-tdline, "delivery text
mat_po_text LIKE tline-tdline. "material po text
DATA: g_ind TYPE i.
DATA: it_esll LIKE esll OCCURS 0 WITH HEADER LINE.
DATA: sub_packno LIKE esll-sub_packno.
DATA : po_flag(1) TYPE c.
DATA : it_erev LIKE erev OCCURS 0 WITH HEADER LINE.
DATA : nmebeln LIKE thead-tdname,
obj LIKE thead-tdname.
DATA : tline LIKE tline OCCURS 0 WITH HEADER LINE. "HEADER TEXT
DATA : it_ekko LIKE ekko OCCURS 0 WITH HEADER LINE.
DATA : it_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
DATA : it_zmm_porder LIKE zmm_porder OCCURS 0 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_ftr LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_rate LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_komv_tax LIKE komv OCCURS 0 WITH HEADER LINE. " For Tax Calculation
DATA : it_zmm_house_bank LIKE zmm_house_bank OCCURS 0 WITH HEADER LINE.
*DATA : mrate TYPE konv-kbetr VALUE 0, mrate1(15). rmoved by ganes and added following logic
DATA : mrate TYPE p VALUE 0 DECIMALS 2, mrate1(15).
DATA : mrate_gm TYPE p DECIMALS 2.
DATA : BEGIN OF it_konv1 OCCURS 0,
knumv LIKE konv-knumv,
kschl LIKE konv-kschl,
END OF it_konv1.
DATA : BEGIN OF it_t052u OCCURS 0.
INCLUDE STRUCTURE t052u.
DATA : END OF it_t052u.
DATA : mpay_terms LIKE t052u-text1.
DATA : mwaers LIKE konv-waers.
DATA : BEGIN OF xt052 OCCURS 0.
INCLUDE STRUCTURE t052.
DATA : END OF xt052.
DATA : it_t16ct LIKE t16ct OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF ztext OCCURS 0.
INCLUDE STRUCTURE ttext.
DATA : END OF ztext.
DATA : it_t001 LIKE t001 OCCURS 0 WITH HEADER LINE.
DATA : mtext(15) TYPE c.
DATA : it_adrc LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_ven LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_plt LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_makt LIKE makt OCCURS 0 WITH HEADER LINE.
DATA : it_eket LIKE eket OCCURS 0 WITH HEADER LINE. " Schedulling
DATA : it_eikp LIKE eikp OCCURS 0 WITH HEADER LINE. " Export
DATA : it_t001w LIKE t001w OCCURS 0 WITH HEADER LINE.
DATA : it_t685t LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_t618t LIKE t618t OCCURS 0 WITH HEADER LINE.
DATA : it_t685t_ftr LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_lfa1 LIKE lfa1 OCCURS 0 WITH HEADER LINE.
DATA : it_bapi_mltx_ga LIKE bapi_mltx_ga OCCURS 0 WITH HEADER LINE. "Material long text
DATA : mfirst TYPE i VALUE 0,
mpay_flag(1) TYPE c VALUE 'X',
mwerks LIKE t001w-werks,
msr TYPE i VALUE 0,
l_rate TYPE p DECIMALS 2 VALUE 0,
l_amt TYPE p DECIMALS 2 VALUE 0,
mflag(1) TYPE c,
mlctr TYPE i VALUE 0,
mfamt TYPE p DECIMALS 2 VALUE 0,
mcfamt(15) TYPE c,
mfword(100) TYPE c,
mkschl LIKE konv-kschl,
mchgamt TYPE p DECIMALS 2 VALUE 0,
mkbetr TYPE p DECIMALS 2 VALUE 0,
mkwert TYPE p DECIMALS 2 VALUE 0.
DATA : j_1iexcd TYPE j_1imocomp-j_1iexcd,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno.
DATA : mjmop_r TYPE p DECIMALS 2 VALUE 0,
mjmoq_r TYPE p DECIMALS 2 VALUE 0,
mjecs_r TYPE p DECIMALS 2 VALUE 0,
mjvcs_r TYPE p DECIMALS 2 VALUE 0,
mjvrd_r TYPE p DECIMALS 2 VALUE 0,
mjsep_r TYPE p DECIMALS 2 VALUE 0.
DATA : mjmop_a TYPE p DECIMALS 2 VALUE 0,
mjmoq_a TYPE p DECIMALS 2 VALUE 0,
mjecs_a TYPE p DECIMALS 2 VALUE 0,
mjvcs_a TYPE p DECIMALS 2 VALUE 0,
mjvrd_a TYPE p DECIMALS 2 VALUE 0,
mjsep_a TYPE p DECIMALS 2 VALUE 0.
DATA : mtitle LIKE t161t-batxt.
DATA : no_ammend(10),request_by(50),ver_txt(100),ver_reason(100),stext(200).
begin of Email data declarations**************
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
DATA: it_docs TYPE STANDARD TABLE OF docs,
v_bin_filesize TYPE i,
it_lines TYPE STANDARD TABLE OF tline,
wa_lines TYPE tline.
DATA : i_pdf LIKE tline OCCURS 1000 WITH HEADER LINE,
v_pdf_bytecount TYPE i,
v_pdf_spoolid TYPE tsp01-rqident,
v_otf_pagecount TYPE i,
v_btc_jobname TYPE tbtcjob-jobname,
v_btc_jobcount TYPE tbtcjob-jobcount.
DATA: objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: vafilename(100) VALUE 'po_output.pdf'.
DATA: jobdata TYPE sxjobdata.
DATA arc_params TYPE arc_params.
DATA print_params TYPE pri_params.
DATA g_send_prog TYPE syrepid VALUE 'ZVF03_TEST_PROG'.
DATA immediate TYPE btcchar1.
DATA: i_jobname TYPE tbtcp-jobname,
i_jobcount TYPE tbtcp-jobcount,
i_jobstepcount TYPE tbtcp-stepcount.
DATA recipient_obj LIKE swotobjid.
CONSTANTS: sx_true TYPE sx_boolean VALUE 'X'.
TABLES: tbtcp.
end of Email data declarations**************
SELECTION-SCREEN : BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : mebeln FOR ekko-ebeln OBLIGATORY . " 75
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 12.
SELECTION-SCREEN COMMENT (20) text-b01.
PARAMETERS: b1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : END OF BLOCK block1.
SELECTION-SCREEN: BEGIN OF SCREEN 200 TITLE text-001 AS WINDOW.
PARAMETERS : p_email TYPE ad_smtpadr. "E-Mail Address
SELECTION-SCREEN: END OF SCREEN 200.
INITIALIZATION.
SET PF-STATUS 'ZMMPORD_STAT'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'EMAIL'.
PERFORM zemail.
WHEN '&IC1'.
PERFORM load_data.
PERFORM process.
IF NOT p_email IS INITIAL.
PERFORM send_mail.
ENDIF.
ENDCASE.
*START-OF-SELECTION.
PERFORM load_data.
PERFORM process.
FORM load_data .
DATA : gindex LIKE sy-tabix.
SELECT * FROM t16ct INTO TABLE it_t16ct WHERE spras = 'EN'.
SELECT * FROM ekko INTO TABLE it_ekko WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * FROM erev INTO CORRESPONDING FIELDS OF TABLE it_erev FOR ALL ENTRIES IN it_ekko
WHERE edokn = it_ekko-ebeln AND rscod <> '' .
SORT it_erev BY edokn revno DESCENDING.
LOOP AT it_ekko.
IF NOT ( it_ekko-frgke EQ 'O' OR it_ekko-frgke EQ '0' ) .
MESSAGE e000(zsd) WITH 'Purchase Order is not Realeased'.
ENDIF.
ENDLOOP.
SELECT * FROM ekpo INTO TABLE it_ekpo WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * INTO TABLE it_makt
FROM makt
FOR ALL ENTRIES IN it_ekpo
WHERE matnr EQ it_ekpo-matnr.
SELECT * INTO TABLE it_lfa1
FROM lfa1
FOR ALL ENTRIES IN it_ekko
WHERE lifnr EQ it_ekko-lifnr.
ENDIF.
SELECT *
INTO TABLE it_t052u
FROM t052u
FOR ALL ENTRIES IN it_ekko
WHERE zterm EQ it_ekko-zterm
AND spras EQ 'EN'.
IF sy-subrc EQ 0.
SORT it_t052u BY zterm.
ENDIF.
SELECT * FROM eket INTO TABLE it_eket WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SORT it_eket BY ebeln ebelp.
ENDIF.
SELECT *
INTO TABLE it_eikp
FROM eikp
FOR ALL ENTRIES IN it_ekko
WHERE exnum EQ it_ekko-exnum.
IF sy-subrc EQ 0.
SORT it_eikp BY exnum.
SELECT *
INTO TABLE it_t618t
FROM t618t
FOR ALL ENTRIES IN it_eikp
WHERE expvz EQ it_eikp-expvz
AND spras EQ 'E'
AND land1 EQ 'IN'.
IF sy-subrc EQ 0.
SORT it_t618t BY expvz.
ENDIF.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'L'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * FROM konv INTO TABLE it_konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
LOOP AT it_konv.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv BY knumv kherk kschl.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'F'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * INTO TABLE IT_KONV_FTR FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0
AND KPOSN GT '000000'.
AND ( KRECH = 'B' " RTDK906167
OR KRECH = 'A' ).
SELECT * INTO TABLE it_konv_ftr FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0
AND kposn GT '000000'.
LOOP AT it_konv_ftr.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv_ftr-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv_ftr INDEX gindex.
ENDIF.
ENDLOOP.
IF it_konv_ftr[] IS NOT INITIAL.
SORT it_konv_ftr BY knumv kschl.
ENDIF.
SELECT KNUMV KSCHL INTO CORRESPONDING FIELDS OF TABLE IT_KONV1 FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
and kherk = 'D'
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0.
AND ( KRECH = 'B' RTDK906167
OR KRECH = 'A' ).
SELECT knumv kschl INTO CORRESPONDING FIELDS OF TABLE it_konv1 FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
DELETE ADJACENT DUPLICATES FROM it_konv1 COMPARING knumv kschl.
LOOP AT it_konv1.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv1-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv1 INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv1 BY knumv kschl.
ENDIF.
SELECT * INTO TABLE it_t685t
FROM t685t
FOR ALL ENTRIES IN it_konv
WHERE kschl EQ it_konv-kschl
AND kappl EQ it_konv-kappl
AND spras EQ 'E'.
SELECT * INTO TABLE it_t685t_ftr
FROM t685t
FOR ALL ENTRIES IN it_konv_ftr
WHERE kschl EQ it_konv_ftr-kschl
AND kappl EQ it_konv_ftr-kappl
AND spras EQ 'E'.
it_t685t_ftr-kschl = 'JVCS'.
it_t685t_ftr-vtext = 'IN CST in vat'.
APPEND it_t685t_ftr.
SELECT * INTO TABLE it_zmm_house_bank
FROM zmm_house_bank
WHERE ebeln IN mebeln.
ELSE.
MESSAGE e899(mm) WITH 'Data not found for selection criteria...'.
ENDIF.
ENDFORM. " Load_data
FORM process .
DATA : mctr TYPE i VALUE 1.
DATA : gindex LIKE sy-tabix.
DATA : mline(75) TYPE c.
DATA : mlifn2 LIKE ekpa-lifn2.
DATA : mv_name LIKE lfa1-name1,
madrnr LIKE lfa1-adrnr.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZMM_PORDER'
language = sy-langu
OPTIONS = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
LOOP AT it_ekko.
CALL FUNCTION 'START_FORM'
EXPORTING
form = 'ZMM_PORDER'.
SELECT SINGLE *
FROM t001
INTO it_t001
WHERE bukrs EQ it_ekko-bukrs.
mcompname = it_t001-butxt.
TRANSLATE mcompname TO UPPER CASE.
Document Type
SELECT SINGLE batxt
INTO mtitle
FROM t161t
WHERE bstyp EQ 'F'
AND spras EQ 'E'
AND bsart EQ it_ekko-bsart.
REFRESH it_adrc.
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc_plt
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
REFRESH : xt052.
mfamt = 0.
msr = 0.
in 500c this statement failed.
SELECT SINGLE * FROM T052 INTO XT052 WHERE ZTERM = IT_EKKO-ZTERM.
CALL FUNCTION 'FI_TEXT_ZTERM'
EXPORTING
I_T052 = XT052
TABLES
T_ZTEXT = ZTEXT.
As per Preeti... Shipment address should be shown on top as purchase order company address. 27.04.
PERFORM writeform USING 'PLANT' 'PLANT'.
SELECT SINGLE name1 adrnr
INTO (mv_name,madrnr)
FROM lfa1
WHERE lifnr EQ it_ekko-lifnr.
REFRESH it_adrc[].
CLEAR it_adrc[].
FREE it_adrc[].
SELECT SINGLE *
INTO it_adrc_ven
FROM adrc
WHERE addrnumber EQ madrnr.
READ TABLE it_lfa1 WITH KEY lifnr = it_ekko-lifnr.
PERFORM writeform USING 'VENDOR' 'VENDOR'.
Shipment
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
up to 1 rows.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
SELECT SINGLE j_1iexcd j_1icstno j_1ilstno
INTO (j_1iexcd,j_1icstno,j_1ilstno)
FROM j_1imocomp
WHERE werks = mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
PERFORM writeform USING 'SHIPMNT' 'SHIPMNT'.
READ TABLE it_eikp WITH KEY exnum = it_ekko-exnum.
IF sy-subrc EQ 0.
READ TABLE it_t618t WITH KEY expvz = it_eikp-expvz.
ENDIF.
your_ref = it_ekko-ihrez.
our_ref = it_ekko-unsez.
READ TABLE it_erev WITH KEY edokn = it_ekko-ebeln.
IF sy-subrc = 0.
no_ammend = it_erev-revno.
request_by = it_erev-crnam.
ver_txt = it_erev-txz01.
READ TABLE it_t16ct WITH KEY rscod = it_erev-rscod.
IF sy-subrc = 0.
ver_reason = it_t16ct-rstxt.
ELSE.
ver_reason = ''.
ENDIF.
ELSE.
no_ammend = ''.
request_by = ''.
ver_txt = ''.
ver_reason = ''.
ENDIF.
PERFORM writeform USING 'PO_INFO' 'PO_INFO'.
IF it_zmm_house_bank[] IS NOT INITIAL.
READ TABLE it_zmm_house_bank INDEX 1.
PERFORM writeform USING 'BANKDTL' 'BANKDTL'.
ENDIF.
PERFORM writeform USING 'HDR_INFO' 'HDR_INFO'.
PERFORM writeform USING 'BRK_TTL' 'MAIN'.
msr = 1.
mlctr = 1.
*added by ganesh to prevent deleted items to appear in print out
LOOP AT IT_EKPO WHERE EBELN EQ IT_EKKO-EBELN.
LOOP AT it_ekpo WHERE ebeln EQ it_ekko-ebeln AND loekz NE 'L'.
*end of change
CLEAR: mrate, mrate1.
SELECT * FROM konv INTO TABLE it_konv_rate
WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp
AND ( kschl EQ 'PBXX' OR kschl EQ 'PB00' OR kschl EQ 'P001' ).
LOOP AT it_konv_rate.
IF it_konv_rate-kpein > 0. " added by ganesh as per sudhir 12.10.2007
mrate_gm = it_konv_rate-kbetr / it_konv_rate-kpein.
mrate = mrate + mrate_gm. " added by ganesh as per sudhir 12.10.2007
ELSE.
mrate = mrate + it_konv_rate-kbetr.
ENDIF.
IF it_konv_rate-waers IS NOT INITIAL.
mwaers = it_konv_rate-waers.
ENDIF.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mrate = mrate * 100.
ENDIF.
End for japanies Yen
mrate1 = mrate.
End rate
mfirst = 0.
MFAMT = MFAMT + ( IT_EKPO-NETPR * IT_EKPO-MENGE ).
mfamt = mfamt + ( mrate * it_ekpo-menge ).
PERFORM get_mat_long_text.
DATA: lt_ctr TYPE i VALUE 0,lt_ctr1 TYPE i, lt_count TYPE i VALUE 0. " Long text counter
DESCRIBE TABLE it_bapi_mltx_ga LINES lt_count.
CLEAR it_bapi_mltx_ga.
*Added by Rajiv 10.05.2007 Read and if condition RTDK906165
READ TABLE it_konv WITH KEY knumv = it_ekko-knumv
kposn = it_ekpo-ebelp.
mkbetr = 0.
mkwert = 0.
IF sy-subrc EQ 0.
LOOP AT it_konv WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp.
IF it_konv-krech EQ 'A'.
mkbetr = it_konv-kbetr / 10.
ELSE.
mkbetr = it_konv-kbetr.
ENDIF.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkbetr = mkbetr * 100.
ENDIF.
End for japaies Yen
IF mkbetr LT '0'.
mkbetr = mkbetr * ( -1 ).
ENDIF.
mkwert = it_konv-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkwert = mkwert * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mkwert.
IF mkwert LT '0'.
mkwert = mkwert * ( -1 ).
ENDIF.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE it_t685t WITH KEY kschl = it_konv-kschl BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.
CLEAR it_bapi_mltx_ga.
ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
mlctr = mlctr + 1.
ENDLOOP. " it_konv.
ELSE.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
mfirst = 0.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.CLEAR it_bapi_mltx_ga.ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
ENDIF.
*Commented by rajiv 10.05.2007 used this code in above condition.
added by ganesh on 260407 to print record
if it_konv is initial.
READ TABLE IT_MAKT WITH KEY MATNR = IT_EKPO-MATNR.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP BINARY SEARCH.
mFirst = 0.
if mFirst eq 0.
PERFORM WRITEFORM USING 'BRK_INFO' 'MAIN'.
mFirst = 1.
else.
add 1 to lt_ctr.
clear it_bapi_mltx_ga.
read table IT_BAPI_MLTX_GA index lt_ctr. "For long text
if sy-subrc ne 0.clear it_bapi_mltx_ga.endif.
PERFORM WRITEFORM USING 'BRK_INFO1' 'MAIN'.
Endif.
endif.
end of change
REFRESH it_komv_tax.
PERFORM get_tax_cal USING it_ekpo-ebeln
it_ekpo-ebelp.
Changing it_komv_tax.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'T'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
LOOP AT it_komv_tax.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_komv_tax-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_komv_tax INDEX gindex.
ENDIF.
ENDLOOP.
LOOP AT it_komv_tax WHERE kwert IS NOT INITIAL.
IF ( IT_KOMV_TAX-KSCHL EQ 'JMOP' OR
IT_KOMV_TAX-KSCHL EQ 'JECS' OR
IT_KOMV_TAX-KSCHL EQ 'JSEP' OR
IT_KOMV_TAX-KSCHL EQ 'JMOQ' OR
IT_KOMV_TAX-KSCHL EQ 'JVCS' OR
IT_KOMV_TAX-KSCHL EQ 'JVRD' OR
IT_KOMV_TAX-KSCHL EQ 'JMIP' OR
* IT_KOMV_TAX-KSCHL EQ 'JEIP' OR
IT_KOMV_TAX-KSCHL EQ 'JSEI' OR
IT_KOMV_TAX-KSCHL EQ 'JSRT' OR
IT_KOMV_TAX-KSCHL EQ 'JEC3' OR
IT_KOMV_TAX-KSCHL EQ 'JVRN' )
AND IT_KOMV_TAX-KWERT IS NOT INITIAL.
SELECT SINGLE vtext
INTO mtext
FROM t685t
WHERE kschl EQ it_komv_tax-kschl
AND spras EQ 'E'.
l_rate = it_komv_tax-kbetr / 10.
l_amt = it_komv_tax-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
l_amt = l_amt * 100.
ENDIF.
End for japaies Yen
ADD l_amt TO mfamt.
IF lt_ctr LT lt_count. "Long text
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
ELSE.
CLEAR it_bapi_mltx_ga.
ENDIF.
IF l_rate EQ 0 OR l_amt EQ 0.
l_rate = ''.
l_amt = ''.
ENDIF.
PERFORM writeform USING 'TAX_LINE_ITEM' 'MAIN'.
ENDIF.
ENDLOOP.
IF lt_ctr LT lt_count.
DATA mbal_line TYPE i.
mbal_line = ( lt_count - lt_ctr ).
DO mbal_line TIMES.
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
IF sy-subrc = 0.
PERFORM writeform USING 'LTEXT' 'MAIN'.
ENDIF.
ENDDO.
ENDIF.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F04'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
del_text = tline-tdline.
ENDIF.
CONDENSE del_text.
ENDLOOP.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F03'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh.
CLEAR : po_flag, mat_po_text.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
MOVE tline-tdline TO mat_po_text.
CONDENSE mat_po_text.
PERFORM writeform USING 'MTRL_PO_TEXT' 'MAIN'.
po_flag = 'X'.
CLEAR : mat_po_text.
ENDIF.
ENDLOOP.
*Added lines below for Schedule delivery for line item on 09.05.2007:Rajiv
CLEAR g_ind.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
g_ind = sy-tabix.
LOOP AT it_eket FROM g_ind.
IF it_eket-ebeln EQ it_ekpo-ebeln AND it_eket-ebelp = it_ekpo-ebelp.
PERFORM writeform USING 'SCHEDULE' 'MAIN'.
ELSE.
EXIT.
ENDIF.
ENDLOOP.
*End Addition:Rajiv
PERFORM writeform USING 'REQSLP' 'MAIN'.
mlctr = mlctr + 1.
msr = msr + 1.
CLEAR: lt_ctr, lt_ctr1.
following lines added by ganesh to add service po details as per Mr. sadiq 21.08.2007
IF it_ekpo-packno IS NOT INITIAL.
CLEAR sub_packno.
SELECT SINGLE sub_packno INTO sub_packno FROM esll WHERE packno = it_ekpo-packno.
IF sub_packno IS NOT INITIAL.
CLEAR it_esll.
REFRESH it_esll.
SELECT * FROM esll INTO CORRESPONDING FIELDS OF TABLE it_esll
WHERE packno = sub_packno.
IF sy-subrc = 0.
PERFORM writeform USING 'SERVICE_PO_TEXT' 'MAIN'.
ENDIF.
LOOP AT it_esll.
CONCATENATE sub_packno it_esll-introw INTO obj.
CALL FUNCTION 'READ_TEXT' "4500002446 C300
EXPORTING
id = 'LTXT'
language = sy-langu
name = obj
object = 'ESLL'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
CLEAR stext.
LOOP AT tline.
CONCATENATE stext tline-tdline INTO stext SEPARATED BY space.
ENDLOOP.
FREE tline.
CLEAR tline.
REFRESH tline.
PERFORM writeform USING 'SERVICE_PO' 'MAIN'.
PERFORM writeform USING 'SERVICE_TEXT' 'MAIN'.
ENDLOOP.
ENDIF.
ENDIF.
end of change
ENDLOOP. " it_ekpo.
IF mlctr < 15.
DO 5 TIMES.
PERFORM writeform USING 'LINEFEED' 'MAIN'.
ENDDO.
ENDIF.
added by ganesh for allding line before ECC No.
IF it_ekko-bsart NE 'ZIM'. " IF EXPORT NO NEED TO PRINT ECC.
PERFORM writeform USING 'LIN' 'MAIN'.
PERFORM writeform USING 'WERKS_TAX_DETAIL' 'MAIN'.
ENDIF.
end of change
MFLAG = 'Y'.
PERFORM writeform USING 'TERMS_VAL' 'MAIN'.
LOOP AT it_konv1 WHERE knumv EQ it_ekko-knumv.
mkschl = it_konv1-kschl.
mchgamt = 0.
LOOP AT it_konv_ftr WHERE knumv EQ it_konv1-knumv
AND kschl EQ mkschl.
mchgamt = mchgamt + it_konv_ftr-kwert.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mchgamt = mchgamt * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mchgamt.
IF mchgamt LT '0'.
mchgamt = mchgamt * ( -1 ).
ENDIF.
READ TABLE it_t685t_ftr WITH KEY kschl = mkschl.
PERFORM writeform USING 'TERMS_FTR_VAL' 'MAIN'.
mlctr = mlctr + 1.
ENDLOOP.
mflag = 'T'.
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
amt_in_num = mfamt
IMPORTING
amt_in_words = mfword
EXCEPTIONS
data_type_mismatch = 1
OTHERS = 2.
CONDENSE mebeln.
nmebeln = it_ekko-ebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F01'
language = sy-langu
name = nmebeln
object = 'EKKO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
*---- CHANGED BY MATHEW BECAUSE THIS STATMENT WORKING FINE IN 300 BUT NOT IN 500C.
LOOP AT ZTEXT.
IF ZTEXT-TEXT1 IS NOT INITIAL.
PERFORM WRITEFORM USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
MPAY_FLAG = 'Y'.
ENDLOOP.
READ TABLE it_t052u WITH KEY zterm = it_ekko-zterm.
LOOP AT it_t052u WHERE zterm EQ it_ekko-zterm.
IF it_t052u-text1 IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
mpay_flag = 'Y'.
ENDLOOP.
PERFORM writeform USING 'TERMS_COND_VAL' 'MAIN'.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_HDR' 'MAIN'.
ENDIF.
CONDENSE txt.
ENDLOOP.
PERFORM writeform USING 'FTR' 'FTR_LIN3'.
PERFORM writeform USING 'FTR_LIN1' 'FTR_LIN1'.
CALL FUNCTION 'END_FORM'.
ENDLOOP. " It_ekko.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = itcpp
RDI_RESULT =
TABLES
otfdata = otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " Process
*& Form WRITEFORM
text
-->P_0150 text
-->P_0151 text
FORM writeform USING value(p_0150)
value(p_0151).
CALL FUNCTION 'WRITE_FORM'Hi
I think some basis related configuartions to be done
Try like this and inform me
A cyclic job runs, which processes the messages seen in the SOST queue.
Are you sure it's not the frequency of the cyclic job, rather than the
number of messages in the queue, that you are observing? In messages
that are queued and before the cyclic job runs, "wait for comm. service"
is the normal status.
If you mean that there are always 4 items queued in SOST regardless of
the cyclic send job, then I have no ideas. I would have thought there
was no way to do that.
when the send job runs it just never
picks them up & sends them, while it picks up many others. The send job
is somehow blind to these; no error message occurs. In this case, I
'delete' them from the queue (in SOST) and then 'undelete' (drop down
menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
actually get picked up & sent when the next cyclic send job executes.
Regards
Pavan -
Sending ALV output in a mail in PDF format
Hi folks,
I have a requiremtnt. If i execute my ALV report in background, the output should be sent to the reciepient's mail in pdf format. i have used the function moudles CONVERT_ABAPSPOOLJOB_2_PDF and SO_DOCUMENT_SEND_API1. Now i am able to see my report output in spool in some pdf formt. how can i send this to the reciever mail as an attachement...pls send me any sample report which suits my reqirement...thanks in advance,
Ram.REPORT ZSAP_EMAIL MESSAGE-ID Z001.
*TABLES: rlgrap, btcxpm." zlookup.
DATA:
V_ZCODE(3) TYPE C,
*svrname LIKE zlookup-zdesc,
WA_ERROR(80) TYPE C,
GLOBAL_FILEMASK_ALL(80).
DATA: T_SOUD LIKE SOUD.
DATA: P_INFOLDER LIKE SOFDK.
DATA: P_OUTFOLDER LIKE SOFDK.
DATA: OBJECT_HD_DISPLAY LIKE SOOD2.
DATA: OBJECT_ID LIKE SOODK.
DATA: DOCUMENT LIKE SOOD4.
DATA: HEADER_DATA LIKE SOOD2.
DATA: LINK_FOLDER_ID LIKE SOODK.
DATA: FOLDER_SELECTIONS LIKE SOFDS.
DATA: FOLDER_LIST LIKE SOXLI OCCURS 0 WITH HEADER LINE.
DATA: RECEIVERS LIKE SOOS1 OCCURS 0 WITH HEADER LINE.
DATA: OBJCONT LIKE SOLI OCCURS 0 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE.
DATA: OBJECT_CONTENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJECT_HD_CHANGE LIKE SOOD1.
DATA: BEGIN OF FILES OCCURS 0,
LINE(200) TYPE C,
END OF FILES.
DATA: LISTOBJECT LIKE ABAPLIST OCCURS 1 WITH HEADER LINE.
*Email to addresses
SELECTION-SCREEN: BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
PARAMETERS: P_MAILTO(240) TYPE C.
*PARAMETERS:P_MAILTO TYPE SOLI-LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 10(2) TEXT-001.
*Use zlookup-ztype as group to define multiple email to addresses
*SELECT-OPTIONS: s_mailto FOR zlookup-ztype.
SELECTION-SCREEN: END OF BLOCK BL1.
*Subject
SELECTION-SCREEN: BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-BL2.
PARAMETERS: P_SUBJ LIKE DOCUMENT-OBJDES.
SELECTION-SCREEN: END OF BLOCK BL2.
*Body
SELECTION-SCREEN: BEGIN OF BLOCK BL3 WITH FRAME TITLE TEXT-BL3.
PARAMETERS: P_BODY1 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY2 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY3 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY4 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY5 LIKE SOLISTI1-LINE LOWER CASE.
PARAMETERS: P_BODY6 LIKE SOLISTI1-LINE LOWER CASE.
SELECTION-SCREEN: END OF BLOCK BL3.
*Attachments
SELECTION-SCREEN: BEGIN OF BLOCK BL4 WITH FRAME TITLE TEXT-BL4.
PARAMETERS: P_FNAME1 LIKE FILES-LINE.
PARAMETERS: P_FNAME2 LIKE FILES-LINE.
PARAMETERS: P_FNAME3 LIKE FILES-LINE.
PARAMETERS: P_FNAME4 LIKE FILES-LINE.
PARAMETERS: P_FNAME5 LIKE FILES-LINE.
PARAMETERS: P_FNAME6 LIKE FILES-LINE.
SELECTION-SCREEN: END OF BLOCK BL4.
AT SELECTION-SCREEN.
PERFORM CHK_SELECTION.
IF NOT WA_ERROR IS INITIAL.
MESSAGE E001 WITH WA_ERROR.
ENDIF.
START-OF-SELECTION.
END-OF-SELECTION.
PERFORM SEND_EMAIL.
FORM chk_selection
FORM CHK_SELECTION.
CLEAR WA_ERROR.
*Loop only once ???
*If more checkings to be done.
*Think about it and if not clear.
*Let it sink in for a couple of minutes.
*Still doesn't make sence? Go home and sleep on it.
DO 1 TIMES.
*Check Email to
IF P_MAILTO IS INITIAL .
*AND s_mailto IS INITIAL.
WA_ERROR = 'Invalid or no EMAIL TO selection'.
EXIT.
ENDIF.
ENDDO.
ENDFORM. "chk_selection
*& Form send_email
*text
*--> p1 text
*<-- p2 text
FORM SEND_EMAIL.
PERFORM GET_FOLDER_INFO.
PERFORM FILL_BODY.
PERFORM INS_NEW_OBJECT.
PERFORM CRT_ATTACHMENTS.
PERFORM FILL_RECEIVERS_INFO.
PERFORM SND_EMAIL.
ENDFORM. " send_email
*--+--
*FORM Get_folder_info
FORM GET_FOLDER_INFO.
CLEAR T_SOUD.
*Small so should be quick.
SELECT * FROM SOUD
INTO T_SOUD
WHERE SAPNAM = SY-UNAME.
P_INFOLDER-FOLTP = 'FOL'.
P_INFOLDER-FOLYR = T_SOUD-INBYR. "inbox
P_INFOLDER-FOLNO = T_SOUD-INBNO.
P_OUTFOLDER-FOLTP = 'FOL'.
P_OUTFOLDER-FOLYR = T_SOUD-OUTYR. "outbox
P_OUTFOLDER-FOLNO = T_SOUD-OUTNO.
ENDSELECT.
ENDFORM. "get_folder_info
*FORM fill_body *
FORM FILL_BODY.
OBJECT_CONTENT-LINE = P_BODY1.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY2.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY3.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY4.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY5.
APPEND OBJECT_CONTENT.
OBJECT_CONTENT-LINE = P_BODY6.
APPEND OBJECT_CONTENT.
ENDFORM. "fill_body
*FORM ins_new_object *
FORM INS_NEW_OBJECT.
OBJECT_HD_CHANGE-OBJNAM = 'Notes'.
OBJECT_HD_CHANGE-OBJDES = P_SUBJ.
CALL FUNCTION 'SO_OBJECT_INSERT'
EXPORTING
FOLDER_ID = P_OUTFOLDER
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = 'RAW'
OWNER = SY-UNAME
IMPORTING
OBJECT_HD_DISPLAY = OBJECT_HD_DISPLAY
OBJECT_ID = OBJECT_ID
TABLES
OBJCONT = OBJECT_CONTENT
OBJHEAD = OBJHEAD
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
DL_NAME_EXIST = 4
FOLDER_NOT_EXIST = 5
FOLDER_NO_AUTHORIZATION = 6
OBJECT_TYPE_NOT_EXIST = 7
OPERATION_NO_AUTHORIZATION = 8
OWNER_NOT_EXIST = 9
PARAMETER_ERROR = 10
SUBSTITUTE_NOT_ACTIVE = 11
SUBSTITUTE_NOT_DEFINED = 12
SYSTEM_FAILURE = 13
X_ERROR = 14
OTHERS = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "ins_new_object
*FORM crt_attachments *
*--> P_SUBJ *
FORM CRT_ATTACHMENTS.
DOCUMENT-FOLTP = P_OUTFOLDER-FOLTP.
DOCUMENT-FOLYR = P_OUTFOLDER-FOLYR.
DOCUMENT-FOLNO = P_OUTFOLDER-FOLNO.
DOCUMENT-OBJTP = OBJECT_ID-OBJTP.
DOCUMENT-OBJYR = OBJECT_ID-OBJYR.
DOCUMENT-OBJNO = OBJECT_ID-OBJNO.
DOCUMENT-OBJNAM = 'Notes'.
DOCUMENT-OBJDES = P_SUBJ.
DOCUMENT-OKCODE = 'CHNG'.
DOCUMENT-FILE_EXT = 'TXT'.
LINK_FOLDER_ID = OBJECT_ID.
HEADER_DATA-OBJLA = 'EN'.
HEADER_DATA-OBJNAM = DOCUMENT-OBJNAM.
HEADER_DATA-OBJDES = DOCUMENT-OBJDES.
HEADER_DATA-OBJPRI = '5'.
HEADER_DATA-OBJSNS = 'O'.
HEADER_DATA-FILE_EXT = 'TXT'.
REFRESH FILES.
CLEAR FILES.
IF NOT P_FNAME1 IS INITIAL.
FILES-LINE = P_FNAME1.
APPEND FILES.
ENDIF.
IF NOT P_FNAME2 IS INITIAL.
FILES-LINE = P_FNAME2.
APPEND FILES.
ENDIF.
IF NOT P_FNAME3 IS INITIAL.
FILES-LINE = P_FNAME3.
APPEND FILES.
ENDIF.
IF NOT P_FNAME4 IS INITIAL.
FILES-LINE = P_FNAME4.
APPEND FILES.
ENDIF.
IF NOT P_FNAME5 IS INITIAL.
FILES-LINE = P_FNAME5.
APPEND FILES.
ENDIF.
IF NOT P_FNAME6 IS INITIAL.
FILES-LINE = P_FNAME6.
APPEND FILES.
ENDIF.
IF NOT FILES[] IS INITIAL.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
METHOD = 'ATTCREATEFROMPC'
TABLES
FILES = FILES
CHANGING
DOCUMENT = DOCUMENT
HEADER_DATA = HEADER_DATA.
IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "crt_attachments
*FORM fill_receivers_info *
FORM FILL_RECEIVERS_INFO.
DATA: BEGIN OF RECLIST OCCURS 0,
REC LIKE RECEIVERS-RECEXTNAM,
END OF RECLIST.
*Build reclist
REFRESH RECLIST.
IF NOT P_MAILTO IS INITIAL.
RECLIST-REC = P_MAILTO.
APPEND RECLIST.
ENDIF.
*IF NOT s_mailto IS INITIAL.
*SELECT zdesc
*INTO reclist-rec
*FROM zlookup
*WHERE ztype IN s_mailto.
*APPEND reclist.
*ENDSELECT.
*ENDIF.
REFRESH RECEIVERS.
LOOP AT RECLIST.
FOLDER_SELECTIONS-FOLNAM = 'INBOX'.
CALL FUNCTION 'SO_FOLDER_LIST_READ'
EXPORTING
FOLDER_SELECTIONS = FOLDER_SELECTIONS
OWNER = SY-UNAME
REGION = 'P'
TABLES
FOLDER_LIST = FOLDER_LIST
EXCEPTIONS
COMPONENT_NOT_AVAILABLE = 1
OPERATION_NO_AUTHORIZATION = 2
OWNER_NOT_EXIST = 3
PARAMETER_ERROR = 4
X_ERROR = 5
OTHERS = 6.
IF SY-SUBRC = 0.
CLEAR RECEIVERS.
MOVE: SY-DATUM TO RECEIVERS-RCDAT,
SY-UZEIT TO RECEIVERS-RCTIM,
' ' TO RECEIVERS-RECESC,
P_MAILTO TO RECEIVERS-RECNAM,
'X' TO RECEIVERS-SNDEX.
APPEND RECEIVERS.
RECEIVERS-RCDAT = SY-DATUM.
RECEIVERS-RCTIM = SY-UZEIT.
RECEIVERS-RECNAM = RECLIST-REC.
RECEIVERS-RECNO = FOLDER_LIST-PARNO.
RECEIVERS-RECTP = FOLDER_LIST-PARTP.
RECEIVERS-RECYR = FOLDER_LIST-PARYR.
RECEIVERS-SNDTP = FOLDER_LIST-PARTP.
RECEIVERS-SNDYR = FOLDER_LIST-PARYR.
RECEIVERS-SNDNO = FOLDER_LIST-PARNO.
RECEIVERS-SNDNAM = SY-UNAME.
RECEIVERS-SNDPRI = '1'.
RECEIVERS-MSGID = 'SO'.
RECEIVERS-MSGNO = '619'.
RECEIVERS-DELIVER = 'X'.
RECEIVERS-NOT_DELI = 'X'.
RECEIVERS-READ = 'X'.
RECEIVERS-MAILSTATUS = 'E'.
**receivers-ADR_NAME
RECEIVERS-RESEND = ' '.
RECEIVERS-SORTFIELD = ' '. "'USER WF_BATCH INDIGO BATCH'.
RECEIVERS-SORTCLASS = '5'.
APPEND RECEIVERS.
ELSE.
CLEAR RECEIVERS.
RECEIVERS-SEL = 'X'.
RECEIVERS-RECESC = 'U'.
RECEIVERS-RECNAM = 'U-'.
RECEIVERS-RECEXTNAM = RECLIST-REC.
RECEIVERS-DELIVER = 'X'.
RECEIVERS-NOT_DELI = 'X'.
RECEIVERS-READ = 'X'.
RECEIVERS-MAILSTATUS = 'E'.
RECEIVERS-ADR_NAME = RECLIST-REC.
RECEIVERS-SORTFIELD = RECLIST-REC.
RECEIVERS-SORTCLASS = '5'.
APPEND RECEIVERS.
ENDIF.
ENDLOOP.
ENDFORM. "fill_receivers_info
*FORM snd_email *
FORM SND_EMAIL.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
FOLDER_ID = P_OUTFOLDER
OBJECT_ID = OBJECT_ID
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
CHECK_SEND_AUTHORITY = 'X'
ORIGINATOR_TYPE = 'J'
LINK_FOLDER_ID = LINK_FOLDER_ID
TABLES
OBJCONT = OBJECT_CONTENT
RECEIVERS = RECEIVERS
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
ORIGINATOR_NOT_EXIST = 20
X_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "snd_email
go through this.
Thanks -
Acrobat X Pro - Export multiple PDFs to JPG
In Acrobat 9 Pro I am able to export multiple pdfs to jpg using file--->export multiple.... In Acrobat X I can't seem to find this funtionality. Any ideas?
Thanks.I tried this script and it did work but I needed to export to PNG rather than JPG. I could not see a way to do that without actual scripting, which I don't know how to do. So I opened the script linked here in Textpad and just changed "jpg" to "png" and it worked - happy day for me! If anyone would like to download this action, you can find it here: http://ccl.rutgers.edu/~lindaeve/acrobatx/Export_to_PNG.sequ
Linda -
Apple Mail change my signature font
I need for business purpose to have a separate font for my email font and my signature. But everytime Apple Mail change my signature font according to the body font.
What can I do? (I didn't check the box with "use my default font")
thx
AndreaI sign the pdf with a digital signature which includes a picture of my written signature. When I attach it to Apple mail or upload to mobileme, the signiture disappears. My clients see nothing. When I go back to the email in the sent box and open the pdf in the email there is no signature. When I open the original pdf the signature is there
This problem does not exist in outlook 2011, but would have liked to use mail as outlook does not support caldev
I don't know if I can explain it any better. -
I can't print e-mail to pdf since ios5
hallo!
i upgrade my ipad to ios5.
bevore this update i printed my e-mails to pdf (app "save2pdf").
so i can write outside my office informations to the mail on my ipad.
now i miss this option.
the support from save2pdf tould me, that apple stopped this option.
there is no possibility to print a e-mail in a pdf-file.
why?
and maybe apple will change it?See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages -
Good day,
I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?Good day abrieb93050306,
I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
This will probably resolve your issue.
Let me know if you still experience any issue.
Regards,
Aadesh
Maybe you are looking for
-
Repeating Group header on each page
Hello Everybody, I have two groups in my report. For my first group value, i have given report - group expert - options and checked "Repeat group header on each page" assuming that my first group values will appear on each page. But it is not doing s
-
I can't print my CC membership invoices of november and december
I can't print my CC membership invoices of november and december. The others are O.K. bu these two refuse to produce a pdf.
-
Can external users change their language, time zone, and locale settings?
Hi, We're migrating our hosts from WebEx cloud to our on-prem solution right now (CWMS 1.5.1.323.A). We've learned that CWMS 1.5 does not provide an online address book where hosts could customize language, time zone, and locale settings for their ex
-
New ipod...what now?
I am going to be buying a new iPod nano tomorow. (4GB) Does anyone know if I will have a problem with the nike +? I already have an account and have logged a lot of running and don't want to lose that data. Thanks, "D"
-
How to change the Content-Transfer-Encoding for the fmddataa.fmd from base
Dear all, When I using this SO_DOCUMENT_REPOSITORY_MANAGERto send email,I find the fmddata.fmd file have been changed to binary file attachment. I don't hope so.any one have good idea to avoid this case occur? Can you tell me how to change the