Mail client settings for Sony Z2 tablet

Tried to use standard mail client. However incoming mails are ok and are being downloaded. As for outgoing mails...here there is no synchronization with other devices, if You send mail there, it will appear in outgoing folder, if some message is sent from other device, it doesn't appear in this standard client application. The problem is only with the outgoing folder.How to fix?
Thanks

Hi pilotbroth,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Are you running a POP3 account? as POP3 only really shows a copy of what is in the inbox, outgoing would only show if say you used Exchange or IMAP4 based accounts.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Mail Server Settings for Email Clients

There must be something wrong with my iCloud account but I can't figure out what it could be:
I can't add my iCloud account to third party clients (Postbox, Airmail & MailPilot) I get error messages.
I succesfully added my cousin's iCloud account in those apps, on my own iMac in all 3 apps, no problem at all, yet It doesn't work with my account even though I'm using the exact same settings in both cases!
I'm using the following settings
IMAP Server: imap.mail.me.com
IMAP Port: 993
IMAP Connection Type: TLS / SSL
IMAP Authentication: Auto Detect
SMTP Server: smtp.mail.me.com
SMTP Port: 587
SMTP Connection Type: Start TLS
SMTP Authentication: Auto Detect
I did peruse this page : http://support.apple.com/kb/ht4864 and tried many changes, no can do! I also tried to replace ' imap.mail.me.com ' and ' smtp.mail.me.com ' with ' p07-imap.mail.me.com ' and ' p07-smtp.mail.me.com ' (I found ' p07 ' in Mail.app settings). I also tried p04, p99... Nothing seems to work.
But then again those 3 mail clients work instantly with anyone else's iClound account, on my very iMac! (which sports OS X 10.9.2)
Other than that, no problem using my iCloud account on MAS, iTunes Store, iTunes, iOS. iCloud.com...

They're Apples instructions, not mine.
What (if any) error messages do you get, and have you checked what is happening with Connection Doctor?

Mail server settings for second XServe

Okay, I have the following problem in configuring mail service:
One XServe we use is exclusively for our company, sites and mails. It uses our main domain for handling mails (SA: Mail service / Settings / General: domain name is "domain.com", host name is "domain.com").
The domain has this MX record: "domain.com. IN MX 10 domain.com."
The other XServe is intended for some of our clients. However... it has not a real domain assigned. Only the DNS server alias points to this server (dns2.domain.com, our first XServe is the primary DNS).
So what do I type in at "domain name" and "host name" ? I guess it has to be filled - I would use "domain.com" as domain name and "dns2.domain.com" as host name.
But... can users also use their own domain name as mail server when configuring their mail clients (of course, their domain would get a matching MX record in its DNS configuration) ? In this case I would use dns2.domain.com since it does not play a role.
Can I proceed this way or is an other proceeding more recommended ?
Do I need to add a MX record to our domain.com DNS config like "dns2 IN MX 10 domain.com." - not sure if this works overall ? Note that we don't want to send or receive mails by dns2.domain.com, it would just be that there is a value at SA mail service configuration.

Confessed, I don't know anymore even it was just a few days ago... anyway, I can explain it, maybe it helps you:
My problem was that I have two XServes - one with my company's domains and the other with domains and websites of my clients.
On SA, mail service, tab "Settings", "General" you need to specify a domain name and a host name for the SMTP service.
So far so good. On my first XServe (with my own domains), I simpy used "starenterprise.com" for both fields. Not really correct, but it works fine
However for my second XServe I had no free domain that I could add there (and I refused to register one "just" for this purpose).
So I finally decided to create a subdomain in my main domain's DNS records (in fact, since I run my own primary/secondary name servers, I simply used the alias for the second nameserver that resides on the second XServe).
Therefore on the second XServe I used "dns2.starenterprise.com" for both, the domain and hostname. Again, not really correct, but it works.
Since I have now some clients moved, I can state that anything works correctly.
Originally I feared a bit that due to the "strange" domain/hosts the mail users could be punished by spam filtering software, but this was not the case.
I hope I was of assistance. Let me know if anything is unclear

Changing Mail Server Settings for Other IMAP

Hello,
         I'm an Admin for a treatment center and one of our psychiatrists has a BB Tour. He asked me the other day if I could set up his email account on our exchange server for him on his phone. Going through the mail setup wizard I selected "Other" account and set it up for IMAP and then it asked me for his email address and password. It took the domain name and then assumed the mail server names were as such. Now in a perfect world, this wouldnt be an issue. I recently took over for a complete moron and this guy has our MX records pointing to a 3rd party company where all of our outside emails go and then the Outlook clients are set up to pop this box in addition to the Exchange setup (I know its totally lame). What Ive done for everyone else is just setup a IMAP account using the server IP address and mail works fine for them. I cannot for the life of me find where I can actually edit the mail server names for the IMAP account I create on his BB Tour. Is this a limitation the phone? Or am I not looking in the right place. Thanks!
Solved!
Go to Solution.

Yup -- refer back to my first reply where I said to use the carrier BIS website...while I didn't say it quite so clearly, I did not say to use the on-device email setup wizards.
The device interface to BIS (aka email setup wizards) and the carrier website interface to BIS have subtle differences. For what you need to do, you need to use the carrier website from a PC/browser. Here is the link:
https://bis.na.blackberry.com/html?brand=vzw
If you have not yet created BIS credentials, you will need to. I find it easier to first create those on the device interface and then use them in the web interface. Afterwards, you will have to use the credentials in the device interface, but there is a "remember me" box so you will only have to enter them once.
Personally, I rarely use the device interface...a full keyboard, mouse, and monitor are so much simpler for doing things than a tiny BB screen/keyboard. But that's just me.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Which "micro SDXC card" to buy for SONY XPERIA TABLET Z ?

hi, i m willing to buy a microsd card for my sony xperia tablet z wifi ( sgp 311). it has 16gb inbuilt memory and is xpandable to 64GB..
which one will b a better option amongst the two:
http://www.flipkart.com/sandisk-microsd-card-64-gb-class-10-ultra/p/itmdawkqqfacznhc?pid=ACCDAWKHYHC...
OR
http://www.flipkart.com/samsung-64-gb-microsd-pro-class-10-memory-card-10yrs-warranty/p/itmdj78pjvqv...
i have less knowledge abut the exFAT file system if any of these cards are using the exFAT system..kindly inform me in detail. thank you

Sandisk seems better in xperias i use 16gb sandisk class 10
You can format it with fat32 or exfat on your choice
Some will call me fatalist And some will call me freak
But hidden in my throwing fist The fortune that I seek-- Amon amarth

Client Settings for Device collections Vs Client Settings for User collections

I noticed there are "Client Settings" set for each User and Group in SCCM. I want all my "Client Settings" configured by Device Collections not User Collections, what can I do? Can someone explain the difference between those?
Thanks
James A+, Network+, MCP

One is for user settings on a client and the other is for device settings on a client. As you can imagine user settings can only be deployed to user collections and device settings can only be deployed to device collections.
For more information about the user and device settings see:
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Client Settings for SM 4.0

Hi Experts,
Can any one explain the client settings in Single SM land scape.
My solman is prompting for Transport Request while I do some SPRO settings.
What is standard client setting for single solman client.
Thanks
Samba

Hi Kata,
if you only have one SM client, you can change the client settings in SCC4 so as the system will not ask you for transport requests.
nevertheless, depending the number of people involed in working on the seetings of SOLAMN, i would recommend to set up the transport requests, just for the sake of keeping a better control of what is being modified, although these transport requests won´t be transported to any other system and/or client.
In my case, I have only one SOLMAN system, with only one working client. The majority of the SOLMAN customizing has been performed without having to store the information in transport requests although I have in SE06 the system set as modifiable, and in SCC4.
automatic recording of changes for client dependent objects
and "Changes to Repository and cross-client Customizing " option set in Cross-Client Object Changes.
This setting is not prompting for change requests when setting up SMSY (for example), but obligues me to register in transport changes any OSS Note which I have had to apply with SNOTE in order to avoid bugs. And this is very useful, becasue I know exactly how many OSS Notes and which ones I had to apply and when (although I won´t transport it anywhere).
Hope this helps
Antonio

SLD Client Settings for ECC 6.0 IDES system

Hello Friends
I want to configure the SLD Client settings in teh ECC 6.0.
Can you suggest me the correct guide or steps to follow in order to proceed??
Thanks in advance.
Regards
Pooja

Hi Pooja,
Please refer to the document available @ below mentioned link.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1
Page number 45 onwards will be useful for you. Please read & then perform
Also for more details refer System Landscape Directory (SLD)
NOTE : This is only applicable , if you are configuring SLD for NW 7.0 underlying engine.
I hope the provided information will help. Please revert for further clarification/details.
Best Regards,
~~ Pradeep Bishnoi ~~

Capture settings for Sony HDR-FX1 in FCP 5.0.4

I just got a new sony HDV camera (HDR-FX1). I shot some footage around the office and want to bring it into FCP to practice edits. I have only used DV in the past so what settings do i use for capture and project. There are several presets and i am not sure which to use. PLus i am not sure if there is something on the camera i need to set. The footage looks pulled vertically and doesn't look like it does on the lcd panel on camera. I am sure this is because of a setting i am not using correctly. Anyone have suggestions for me?

Zach,
First choose the sequence quality you want to work with. If you want to edit 1080 then use those presets...but be advised, that the preview on an external monitor will only be correct if it is 1080 all the way. (Disregard if you are not using an external monitor).
If you are ulitmately going to combine footage or want standard 4:3 output...then you may want to set the camera to convert the footage as it is being captured. The increased resolution & 3 chip sensor will still give you better looking DV footage than a consumer DV.
I experimented with capturing between capturing HDV, then using compressor to convert to DV .... and having the camera real-time convert HDV footage to DV. Capturing and letting compressor convert is better...but took almost 3 hours for a 50 minutes of footage. And I have a G5 Dual 2.7. Given that the camera conversion was still good and it was real-time!!!! you may want to comprimise.
Also, keep in mind you get to the HDV capture via file...not through the normal LOG & CAPUTRE.
I'm not in front of either the camera or FCP or I would give you exact detail. I Hope that helps some...post back if you still have trouble and I'll try to answer when I'm back in the office.

Sequence settings for Sony HandyCam video

I'm working with video shot on a Sony Handycam HDR-CX550. I had no problem importing it into iMovie and then to FCP, however I can't figure out what sequence settings I should use. It appears to be 16x9, but shows up as 4x3 in my FCP bin. Also, the sequence settings I've tried all require rendering every time I make an edit, which obviously becomes a huge pain.
Thanks in advance for any suggestions.

My understanding is that IMovie works with DV streams (files with a .dv extension). You need to convert these to DV quicktimes (with a .mov extensions). Use Compressor (which comes with fcp) to do this. There is an apple preset for this format.

FCP sequence settings for Sony HandyCam video

I'm working with video shot on a Sony Handycam HDR-CX550. I had no problem importing it into iMovie and then to FCP, however I can't figure out what sequence settings I should use. It appears to be 16x9, but shows up as 4x3 in my FCP bin. Also, the sequence settings I've tried all require rendering every time I make an edit, which obviously becomes a huge pain.
Thanks in advance for any suggestions.

I have FCP 6. Should I put this question in the Final Cut Studio forum?

Correct sequence settings for Sony HandyCam?

I have a Sony HandyCam DCR-SR200 and when i drag the video over in premiere to add it to the edited video it tells me to check my sequence setting meaning i set it up wrong for that type of video? i just used standard settings. But, if i click change or keep, the video is extrmely zoomed in. How can i change this? The correct sequence settings or am i missing a setting? It's Premiere CS6. Thanks!

Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
Plus, a tutorial list in message #3 http://forums.adobe.com/message/2276578

What client settings for BIOS or MEBx do I need preconfigure for Out Of Band Management in SCCM 2012?

Hi,
On the Client:
What BIOS or MEBx setting do I need preconfigure for Out Of Band Management in SCCM 2012?
Or can I remotly configure BIOS or MEBx settings from SCCM 2012 or Intel SCS?
/SaiTech

Thanks,
Now I see, with Intel SCS add-on for SCCM 2012 it will be the most simple solution. Even better than to have Intel scs standalone, that was an complex setup on dhcp and so on...
Just one thing more, When you configure AD for AMT you have to set a OU. but if you have computers in two ou, I cant see how I can configure that?
/SaiTech

Best Import Settings for Sony XDCAM EX

Ok, this is a variation on my best export settings question. Considering the Sony XDCAM EX1 shoots 8 bit video with 4:2:0 color space, what's the best import settings to use? Which DNX codec will give you the best results? I don't want to import at a quality higher than my source material. And of course, I don't want to import at a quality lower than my source material. I'm looking for the sweet spot.
Thanks
Chris

Roger,
Here's a recent thread somewhat related to your question.
http://discussions.apple.com/thread.jspa?messageID=10171207&#10171207
Matt

Can I set up a Non .mac Email Pop mail client Alias for sending SMTP mail?

I have a yahoo.com POP mail account - [email protected] When I'm lgged into Yahoo mail, this account can receive and send mail from serveral aliases - [email protected], [email protected], etc.
Using Tiger's mail.app, I can log into the Yahoo smtp server and get all my mail, including mail to the alias names.
I would like to be able to reply from my Mac's mail.app account, using one of the aliases, instead of my POP account name. In other words, I'd like the From field be listed as "[email protected]" and not "[email protected]"
In mail.app (v2.1) is there any way to do this?
Alan Sampson' suggestion doesn't work - when I set the From field to the alias name, it looks like mail tries to login to the yahoo SMTP server under the alias, and it gets rejected.
( - see http://discussions.apple.com/thread.jspa?messageID=2603372&#2603372 )
Go to Mail > Preferences > Accounts and under the Account Information tab for the primary email account preferences, enter all alias email addresses in the Email Address field for the account separate by a comma.
[email protected], [email protected], [email protected]
MacMini - 1.42 Mac OS X (10.4.7)
MacMini - 1.42 Mac OS X (10.4.6)
MacMini - 1.42 Mac OS X (10.4.7)

If Yahoo allows this, it should work. Open Mail Help, type alias in the search box, and read the article titled Adding multiple email alias addresses to an account. Could it be that you're trying to put the aliases in the wrong field (i.e. User Name rather than Email Address)? Or maybe it's Yahoo's SMTP server that doesn't allow you to do this?

Mail client settings for Sony Z2 tablet

Similar Messages

Maybe you are looking for