Mail composition window expands off screen

If I reply to an email or create a new email and start to type the email address, the composition window extends about 75% off screen. Does anybody have an idea of what is causing this? I do not believe I have changed my settings and have not installed any new software.

I take it you're talking about the dropdown panel in Rules panel in Mail > Preferences, when you click Edit?
You must have a rule with a whole lot of conditions and/or actions.
What is your screen resolution?
I just experimented a bit, and suspect it's a bug, not "bad design". I notice as I add lines, and the panel approaches the bottom of the screen, the scroll bars appear, so the panel quits growing, as it should, but only 2 lines after they should. It looks to me like the height of the tool bar isn't being considered properly.
If that's what you're seeing, report it that way in the +Mail and Address book+ forum. If others see the same behavior, one of the top posters there may be able to report it, or you can call AppleCare and they can tell you how.
I doubt this is a condition many folks would see, so it probably hasn't come up often, if ever.
If I misunderstand what's happening, please clarify.

Similar Messages

  • Caption setup window expanded off screen-Now stuck!

    So I opened the Caption Setup Window and was playing around with the different options for including captions with my photos. I hit "OK" and later, when I went back into Caption setup, the window was huge and went way off the edge of my screen. The window is about 4 ft. long once I drag it all the way over so I can hit the "Ok" button.
    I tried a new doc, restarting indesign and restarting my computer. This seems like a cool feature, but this bug is annoying. Is there any way to reset the window, so it isn't massive?
    This is inDesign CS5.5 running Mountain Lion
    Thanks,
    Steve

    Next thing I'd try is deleting the prefs. See Replace Your Preferences
    Switching to one of the default workspaces might work, too, but I think it's unlikely. I might also try docking the panel with another, both by stacking it below another one as a "flotilla" and by adding it to a panel group. I'd do this after the prefs, though, as you risk making the other panels wider rather than reducing the width on this one.
    Time machine might also be an option.

  • SQL Management Studio -- Windows open off-screen!

    I used to have three monitors hooked up to this computer, now I only have two. Most applications don't have any problem with this, except SQL Management Studio which keeps opening windows off the right-hand side of the screen which are impossible to move back on-screen! All I can do is right-click the window in the taskbar, then choose "maximize" to temporarily work with the window. (I don't want the window maximized, but that's the only way to make it visible!) Import/Export data wizard window does this, as does the "add new users to DB" window.
    How do I reset window locations in SQL Management Studio? This is getting extremely annoying. And please, please fix this bug! It's the year 2007, your program should be able to cope with multiple monitors! (Imagine how many laptop users who hot-swap monitors all the time are running into this.)
    Thanks in advance.

     Buck Woody - MSFT wrote:
    I'm sorry if I gave the immpression that you couldn't move your screen around - and I did look into the bug. I would never knowingly lie to anyone. Once again, I apologize for the misunderstanding.
    Microsoft has looked into the bug, and in fact, we've done a lot of work on the mulitple monitor support in SQL Server 2008, as I mentioned in my post. You should see an improvement there.
    - Buck
    Your last reply on this thread was telling me that, and I quote: "SSMS has no notion of monitors - it just uses whatever Windows says are there. If you will remove the monitor from the video card settings then SSMS will not show the screens on something that does not exist." Which is incorrect, as my screenshot in the next post proved. Normally when people make a claim, and it's refuted, they respond in some fashion.
    The annoyance is that it took a full year (and an irate post from me) for you to respond to that screenshot, and it still seems like you're unclear about the issue. It has nothing at all to do with "I can't move my screen around". Let's review the repro instructions one more time:
    1) Start with a computer running Windows XP Pro and three monitors plugged in, arranged in a horizontal line. The center monitor is the default.
    2) Open SSMS. Maximize it in the left-most monitor.
    3) In the Object Browser, select a database, expand "Security", expand "Users", then right-click in the list and select "New User"
    4) Move the New User window to the right-most monitor and maximize it.
    5) Close SSMS, then re-open it and bring up the New User window again. Notice that SSMS saves the window position so that it continues to open on the right-most monitor. (This is good!)
    6) Now unplug the right-most monitor and restart the computer. Go to the Monitors property sheet to ensure that there are only two monitors listed, and that the right-most (of the two) is still the default monitor.
    7) Open SSMS, then bring up the New User window once more. Notice that the New User window now opens off-screen.
    The irony is that this bug doesn't even apply to me anymore as, after about 6 months, I got my third monitor back. But for those 6 months, I was getting this behavior MANY TIMES A DAY, driving me completely and utterly furious and crazy each time, because it's such a stupid and moronic and easy-to-fix bug. I don't understand how your QA process could possibly have missed windows opening off-screen.
    (Like you suggested, if SSMS actually ensured that windows opened on monitors that actually exist, this whole thing would be a non-issue.)
    I don't know what you mean by "can't move my screen around," as this has nothing to do with moving or repositioning screens. It has to do with a window that opens off-screen, so that it's impossible to use the window without doing one of the ugly hacks outlined in this thread.
    I'm glad SQL Server 2008 has "lots of work on multiple monitor support" and I'd be extremely happy if it did what you <i>claimed</i> SSMS 2005 did a year ago.
    Sorry for the tone. It's so upsetting to me that bugs related to multi-monitor support could exist in a product in use in 2005, after a full decade of Windows supporting multiple-monitors. Isn't this stuff perfected by now? Doesn't Microsoft have any kind of minimal quality control process, and why isn't this on it? It's hard to express how frustrating this is, both the bug and the lack of response to it.

  • When Safari is in full screen, the window slides off screen to the right after a short period of time.  How do I fix this?

    When Safari is in full screen, window slides off screen to the right after a few seconds.  Does not happen if Safari is not full screen.  How do I fix this?

    You are probably inadvertently swiping to another full-screen app. Are you using a magic trackpad? Does this happen without you touching anything?

  • Save/Open Window Goes Off Screen Bug

    There's this one particular bug I've been having ever since I upgraded from OS X Maverick to Yosemite. Whenever I open/save a file, whether it's on the web browser or Finder, the open/save window goes off screen. I can still see the window but the bottom portion where you normally have the open, save, new folder and cancel buttons - is all the way at the bottom of the screen.
    I can't scale it to its proper size because the window is buried beneath the Docks. The only way to rescale it is to click the arrow key button near the Save As drop down list but sometimes, this button is not there.
    Does anyone else have this problem? Any idea how to fix it?

    Hello Steve:
    It definitely sounds like the hot corner "all windows" is enabled. There is a preference file that needs to be trashed, but I cannot figure out which one (no help to you).
    Be sure that none of the hot corners are enabled and then restart.
    You might also try resetting PRAM (although I do not think that will do anything).
    Barry

  • Window Goes Off-Screen When Mouse arrow Is Moved To Upper Right Hand Corner

    It seems like this happened recently. When the mouse is moved and pointed to the upper right hand corner of the screen everything displayed goes off-screen to the right and left sides. The edge of the window is shown on the right side and a shadow on the left side- when I click on those everything pops back on-screen. I have a bad habit of moving my mouse quickly and this has become annoying.
    I thought it may have been a "Hot Corner" but I checked and this feature is not enabled(in Expose/Dashboard)
    How do I disable this feature?
    Thank you in advance.
    Steve

    Hello Steve:
    It definitely sounds like the hot corner "all windows" is enabled. There is a preference file that needs to be trashed, but I cannot figure out which one (no help to you).
    Be sure that none of the hot corners are enabled and then restart.
    You might also try resetting PRAM (although I do not think that will do anything).
    Barry

  • TextEdit new document window starts off screen

    In TextEdit, if I create a new document, the window stretches off the bottom of the screen. The bounds of the window are {133, 53, 760, 882}. This behaviour takes place when the preference setting 'Wrap to page' is checked. If I create a second new document window while the first is still open, it fits within the screen at {154, 22, 781, 851} (it moves up to the right by 21 pixels). How can I get the first document to start within the screen's real estate?
    If it is unchecked, the co-ordinates of the upper left corner of the new window are {133, 53}. The size of the window depends upon the font size. Note that the upper left corner also remains the same if I change paper sizes.
    I have deleted the preferences but nothing has changed.
    Does anyone know how to control the size and location of a new document window, with the 'wrap' feature checked?
    Thanks.

    On my machines, wrap to page is enabled and I have window size set to 80x70 which works for me for years.

  • Why are my windows sliding off screen?

    So, I was on my Mac Book Pro doing work and I flick between different windows (FCP, Finder, Safari etc) using the cmd - Tab function. All works fine and all the windows stay on the screen.
    However, I was doing something in finder when all of a sudden all the toher windows slid off scree to the left. Now whenever I use Finder the other widows slide off screen and when I tab back to use the other windows finder slides off to the right! I just want them all to be on the screen at the same time again!!
    Any ideas?

    Not sure if you have solved your issue yet. But I had the same issue. Disable/trash iSnap.That's the culprit.

  • Windows move off screen when new app is opened

    I have a user running 10.8.5. The user opens an application like Firefox or Safari. As soon as they open another application like Microsoft Word the browser or other application will shift off the screen. The finder is allowing only one window to show up on the screen at one time. I reset all keyboard shortcuts. Checked Mission Control, Launcher and couldn't find anything that would make this happen. They only have one display connected. I removed all the Office plist files and launched as a first time launch. I still can't find what is making the windows disappear or move off screen.
    I logged on as a different user and the problem went away. So it has to be something in their profile that is causing this. Any ideas?

    In OS X 10.6 and prior, Expose' and Spaces had a separate System Preference setting, along with hot corners. One of the options was to force apps to open in a new space.
    That changed to become Mission Control with OS X 10.8 Mountain Lion. I haven't really used the feature in 10.8. I can't quickly find a useful Apple link, so I'll provide this 3rd-party 'Dummies book' link which might help you sort things out. Mouse and trackpad preferences also can be set to enable gestures that work in conjunction with Mission Control.
    http://www.dummies.com/how-to/content/the-mission-control-pane-in-os-x-mountain- lion.html

  • View coordinate​s window is off-screen

    I have an unconventional dual-monitor setup while my laptop is docked. It's resulted in the coordinates window being located far off-screen. I've moved the secondary monitor around the desktop area to try and locate the window to move it back within view, but have not had success. I've undocked to try and locate the window but have not been successful. I've reset DIadem but this has not brought the window back in view. DIadem isn't very handy for my use without that window.
    Solved!
    Go to Solution.

    The first solution in the link goes through how to locate a window that is registered as a window with windows explorer, thus giving it a bar on the taskbar. Unfortunately the coordinate window isn't, so I can't locate it with the "move" action.
    On the second solution, I should have been specific that I'm using windows XP, and a corporate image at that. I don't find appdata in my user folder (for XP that's C:\Documents and Settings\User\.appdata\). Where's the config file in XP?
    EDIT: I actually just tried to use only the keyboard shortcuts immediately after enabling the coordinate window. DIadem's main window loses focus, so I figured perhaps the coordinate window is given focus. So, I hit Alt+space and the dialog box appears on my screen nearest to the location of the coordinate window. From there I can select "move" with the mouse and by moving the mouse after that, the coordinate window appears underneath it. Fixed!
    Howtogeek:
    Note: For keyboard savvy people, you can just alt-tab to the window, use Alt+Space, then M, then Arrow key, and then move your mouse.

  • Browser window opening off screen

    a while back i started having an issue with firefox. firefox opens but off screen and i cant seem to veiw the open window. it goes off screen. I tryed deleating firefox and re loading a new version it does the same thing. I have no other issues with any other browsers. Someone help please

    I had this problem too, and how I got into it I have no idea. Deleting the file localstore.rdf fixed me right up immediately. Thanks much, ideato. :)

  • ICal Alarm Window Mostly Off Screen

    When an alarm window pops up I can barely see it. Only a little bit of the window is visible as the rest if off the screen. I can drag it into the screen. It will stay there. But every time a new alarm window pops up its in the same position mostly off the screen. How do I get this alarm window to open so it's visible on my screen?

    It's good to see that I'm not the only one. I did just recently install a bunch of Software Updates, so I wonder if this is related to one of those.
    An additional issue I'm now having: the Info panel that used to pop up when double-clicking on an Event is now completely invisible. I've been hunting around the edges of the screen, but it doesn't show. The main iCal window changes color to indicate that another window is active, somewhere; it just can't be found. Interestingly, the Info panel will appear if I view my windows using Expose. There it is, perfectly rendered and in the right place, beyond the reach of my mouse clicks.
    It's very frustrating. I was pretty close to switching to Gmail for all my calendaring; if this isn't resolved in the next few days, I think it's time for the switch.

  • My laptop meets minimum display resolution for Lightroom 5 but bottom of windows display off-screen

    I installed Lightroom 5.3 on my older Lenovo laptop with 1280x768 native screen resolution.  When I open Lightroom and try to set up preferences, the lower part of the preferences window is displayed off the bottom of the screen and I am unable to move it up to make changes.  The same thing happened when it asked me to download the update to 5.5; I could not get to the bottom of the window to say yes.
    The Lightroom 5 specs say the minimum display resolution required to use Lightroom 5 is 1024 x 768 display.  My laptop exceeds that.
    I am using Windows 7 64bit and LR 5 64bit.
    Any ideas or suggestions?
    Don

    Any chance you have set display scaling to Larger - 150% in Windows 7 display settings?  It is possible that that is affecting the display size of LR.

  • Top of windows stuck off screen

    The top of a window of mine is off the top of my screen. Thus, im unable to move the window, since i can't grab onto the top. I've tried switching the resolution, but that didn't help. Could anyone help? Thanks

    No, theres no border to grab, and the top bar is off the top. Theres no window menu for some reason (the app is called dolphin btw, but I don't think that should have an affect).
    I did find a solution though, if it is a bit complicated. I found the .ini file associated with the application in "~/Library/Application Support". In that file, there was a value called "RenderWindowHeight" that had a negative value. I switched it to positive, and reopened the application. The window was then right in the middle of the screen. This isn't something you'd want to mess with if you don't know what your doing, but it did fix the problem

  • On eBay, when I click "enlarge" for item picture, the new window opens off screen; how can change the default location?

    It used to be that when I clicked "enlarge" under the item picture, on items that offer this feature, the new window opened to the left of the screen, which is useful. Now, however, only the left-hand edge of the new window with the enlarged image is visible on the right hand side of my screen and I have to pull it across every time, which gets annoying. I think this started after I created two windows in eBay, one of which was on the right of my screen. Now it seems that the enlarged image window always opens where the second of the two eBay windows was located.
    I look forward to your suggestions.
    Thanks, Simon

    Ok, I figured it out, I clicked "i don't have device available" and it let me log in to my account.

Maybe you are looking for