Mail configuration in portal
Hi,
I would like to get all my mails in portal. I m using my own mail server. V r not using either Exchange server or lotus server. Our local server v r using for mail communication. How can i configure this mail box to my portal. so that i get all my mails in portal itself,
and also one more doubt, how can i set session timeout to portal,.so that if i dont use portal for sme time, it should automatically log-off.
thanks & regards
venkat
Hi ,
You should integrate your portal with your local mail server ( sso confuguration also needed).
for session timeout
Hi ,
See the thread below , It ll resolve your issue
https://www.sdn.sap.com/irj/sdn/thread?threadID=9561
reward points if it is helpful
Hello-
You can set the session timeout of the portal in EP6 SP2 by going to System Administration --> System Configuration --> UM Configuration --> Security Settings.
Here you will find the Lifetime of the SAP Logon Ticket. If this would expire on a user, the next time he/she would click on a link they would be informed their ticket has expired and please login again.
Your backend sessions would be handled automatically by the systems themselves.
The other option would be to put some Javascript code in the default framework page that would call the portal logout function after a certain amount of time. (This would also handle a backend system logout if the SAP transaction was visible and you had DSM termination enabled because the portal frame would change
put life time of logon ticket as the idle time u needed
Koti Reddy
Similar Messages
-
Mailing application in portals
Hi All,
I am trying to do an application which sends a mail to the given receiver's mail id in Portal. I have done the same in java.
Any one please give me guid lines to start the application. I know that javax.mail and activation packages are needed for doing the application. But in porals, where they are existing and how to use them.
Please pore some guidlines for doing the application.
Thanks,
Bhavyasri.M.Hi Bhavyasri,
I think you need to some configurations in order to send a mail in portal. Go through following links/
http://help.sap.com/saphelp_nw04/helpdata/en/84/2756c03e96dc45afcd400fe5c7686d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/36/eacfb72888e04eaf523f7236c0892f/content.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/5f/9367160ab1b24280ae7fa916bd99e2/content.htm
Hope this helps.
Thanks & Regards,
Jhansi Miryala -
How to Configure Multiple Portal Middle Tiers with a Load Balancing Router
Hi,
Portal version trying to install 10.1.2 on Windows 2003 boxes.
I am following the guide http://download.oracle.com/docs/cd/B14099_19/portal.1012/b14037/cg_advnc.htm#i1046354. I have InfraStructure installed on a different box and am trying to install 2 Portal Midtiers each on separate boxes and using LBR. The above document is kind of confusing as I am trying to following
5.3.1 Step 1: Install a Single Portal and Wireless Middle Tier (M1)
5.3.2 Step 2: Configure OracleAS Portal on M1 to Be Accessed Through the LBR (AND FOLLOW ARE THE STEPS 1 to 14 in sequence)
if I follow 1 to 14 steps in sequence the information is not consistent what is being listed in the following sections
5.4.1 Create Virtual Hosts
5.4.2 Configure OracleAS Web Cache
5.4.3 Register OracleAS Portal with OracleAS Single Sign-On
i.e.
ptlconfig -dad portal -sso -host www.abc.com -port 7779
ptlconfig -dad portal -sso -host www.xyz.com -port 7779
as in the above steps it says to run
ptlconfig -dad portal -wc -site
and ssoreg command that always fails because I am running it from midtier as it gives error saying invalid username/password
as oppoesed to steps listed in point 8, 9, 10, 11 and 12.
Can someone please privide the steps in sequence I need to follow when installing 2 midtiers with frontend LBR and one infrastructure. I am trying to follow the architecture listed in the above link.
Any help is really appreciated.
ThanksHi,
Will appreciate any inputs on the following.
I am planning to install Infrastructure and one Midtier BI Forms Reports Discoverer, Portal on one windows box and the second midtier BI Forms Discoverer, Portal on the second windows box.
Please correct me if I am wrong on installing and configuring the mid-tiers as following are the steps I have compiled going through the document and want to make sure this time I do it right.
As I'll be installing BI Forms Reports Discoverer, Portal so wondering when I install the second midtier do I need to unselect all Portal, Forms, Reports, Discoverer or just the Portal I need to unselect.
Also in the host file of both the windows boxes do I just need to keep the LBR IP Address entry and remove the rest.
LBR:_
Computer Name: bigip5.prd.com
IP Address: *167.123.2.5*
Listen Port: *80*
Invaidation Port: *9401*
Infrastructure:_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7777*
Application Server Control port: *1800*
M1 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
M2 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal2.prd.com
IP Address: *167.123.2.7*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
First to create MetadataRepository and then Install Infrastructure and then follow the below steps to install Midtiers
Install and Configure of M1 (Portal and BI Forms Reports Discoverer):-_
*5.3.1 Step 1*: Install a Single Portal and BI Forms Reports Discoverer (M1 i.e. portal1.prd.com)
*5.3.2 Step 2*: Configure OracleAS Portal and BI Forms Reports Discoverer on M1 to Be Accessed Through the LBR
*1.* Configure LBR
*2.* Follow Section 5.4.1.1 to create the Virtual Host for bigip5.prd.com (LBR) and portal1.prd.com (M1)
*3.* Define a site that matches the virtual host entry for bigip5.prd.com (LBR) on Webcache of M1
*4.* Use OracleAS Web Cache Manager on M1, to map the site bigip5.prd.com (LBR) to middle tier portal1.prd.com (M1).
Follow steps 5 and 6 as per the document
*7.* Configure bigip5.prd.com (LBR) to accept invalidation requests from the OracleAS Metadata Repository on a separate port i.e. 9401
*8.* Change iasconfig.xml on M1
*9.* run ptlconfig -encrypt
*10.* Register the URL changes with OracleAS Portal by running ptlconfig -dad portal -wc -site
*11.* No need as it is http only
*12.* Run the follwoing
MID_TIER_ORACLE_HOME_M1\sso\bin\ssoreg.bat
-site_name bigip5.prd.com
-mod_osso_url http://bigip5.prd.com:80
-config_mod_osso TRUE
-oracle_home_path MID_TIER_ORACLE_HOME_M1
-config_file MID_TIER_ORACLE_HOME_M1\Apache\Apache\conf\osso\osso.conf
-admin_info cn=orcladmin
-virtualhost
*13.* Edit targets.xml to enable monitoring of the LBR's front-end host and port settings for OracleAS Portal
+<Property NAME="PortalListeningHostPort" VALUE=http://bigip5.prd.com:80/>+ and then run
MID_TIER_ORACLE_HOME_M1\bin\emctl reload
*14.* Test the setup
Install and Configure of M2 (Portal and BI Forms Reports Discoverer):-_
*5.3.4 Step 4*: Install a Single Portal and BI Forms Reports Discoverer (M2 i.e. portal2.prd.com)
*1.* As I am installing on wiondows so will not set IASCONFIG_LOC environment variable as I can just copy the iasconfig.xml file from M1 to M2
*2.* Run OUI on M2
*3.* Clear the selection for OracleAS Portal but don't know if I need to unselect Forms , Reports, Discoverer also.
*4.* Enable OracleAS Portal
*5.3.5 Step 5:* Configure the New Middle Tier (M2) to Run Your Existing Portal
*1.* Create both virtual hosts as done on M1
*2.* Copy dads.conf, oradav.conf, cache.conf, web.xml from M1 to M2
*3.* Re-register mod_osso on M2. To do this, perform the following steps by copying osso.conf from M1 to M2
*4.* Synchronize the DCM by using the following command
MID_TIER_ORACLE_HOME_M2/Apache/Apache/bin/ssotransfer MID_TIER_ORACLE_HOME_M2/Apache/Apache/conf/osso/osso.conf
*5.* Run dcmctl updateConfig
*6.* add the necessary mod_rewrite and mod_oc4j directives to the httpd.conf and mod_oc4j.conf files respectively
*7.* Restart Oracle HTTP Server on M2
*8.* Access the OracleAS Web Cache Manager on M1 and follow steps 9,10,11,12,13,14,15,16 for Webcache seetings and clustering.
Also will appreciate if can get some info on the following:
*1.*
When I configure the Webcache as per the Document but if I bring down one Midtier Instance the requests are not going to the other Instance that is up and ignores the case whether an instance is down. Any idea how what and where do I need to provide any setting which in case of instance is down routes the requests to the one that is up.
*2.*
What exactly happens when it says To enable monitoring of the LBR's front-end host and port settings for OracleAS Portal edit target.xml. Is this for LBR to find if an Instance is down or not and route the requests appropriately.
Thanks again for all the help. -
How can i setup my E-Mail Configuration which can map to Gmail SMTP in Oats
Hi Team,
I would like to send the reports which i test to some gmail Id's using OATS E-mail Configuration,
Can you please let me know what are the fields needs to entered
SMTP Servers :
When i Searched it says the following are the SMPT server
smtp.gmail.com
SSL Port 465
StartTLS Port 587
Please let me know which one to enter in the "SMTP Server" text box
Return Address : Which address do we need to enter in this field
Thanks and Waiting for your reply,
Anand.I'm facing the same problem, who can help us ? what to enter into fields?
-
Server: Mail configuration of Server Admin not showing ANY Accounts
I have an LDAP directory for my accounts and in the Server Admin GUI, under the Mail configuration, I am not showing any accounts. Currently mail services not working and I have tried to reconstruct the db to no avail.
I the POP log im gettting ...
Aug 10 14:03:29 mail pop3[24233]: DBERROR: critical database situation
In the Mail Access log ...
Aug 10 14:04:56 mail lmtpunix[29548]: DBERROR: critical database situationHow about more info?
Did you ever have a working setup? Accounts?
How did you try to reconstruct?
Check /var/log/mailaccess.log and post some more info for a process number (number in square brackets) -
Can we provide UN and pwd Authentication 4r SMTP Mail Configuration
Dear All,
Previously we are able to send the mails from SAP to Outside World. After chaning the Mail Server to MS Exchange 2003
We enabled the Port the 25.
We are facing a problem While configuring a mail via SMTP for Exchange Server 2003.
Throws an Error Message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 > : Recipient add
As per network Team :
Unless we provide a Username and password, the Send/Receive process does not happen.
Is there any option in SAP - SMTP Mail Configuration to Provide user and password Authentication.
I searched in SDN as well as in market place. but i could not succeed. Please guide me the process.
Regards
SNB.Hi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan -
Help required for MSS configurations on Portal
Hi Experts,
Can someone please send me Portal Configuration guide or some kind of document on how to configure MSS --> Overview and Organisation services. Do I need to pass any parameters or any other configurations required?
Please help me.
Earlier responses would be much appreciated.
Thanks
UdayHi uday,
Please find the below links
MSS Configuration within SAP Portal: Organization Structure
ESS/MSS configuration in Portal as a part of HCM
http://help.sap.com/erp2005_ehp_04/helpdata/EN/14/1a6493d09849448a0537ee6727e799/frameset.htm
Hope it helps...
Thanks,
Rahul. -
Error in Mail configuration - parameters cannot be converted.
Hello All,
I have configured the mail configuration in 4.6d as per the notes 455127, 99965.
but when i try to send the test mail i got the error
Cannot process message in node, parameters cannot be converted ...
Can any one please help me....
the trace in SCOT is as follows.
SO_OBJECT_SEND Recipient in queue flagged
SO_OBJECT_SEND Structure: SOSCO
SO_OBJECT_SEND Status written for this recipient
SO_OBJECT_SEND Structure: SOST
SO_OBJECT_SEND Queue updated
SO_OBJECT_SEND Status updated
SO_OBJECT_ID_FOR_SEND_GET Object ID returned
SX_OBJECTS_SEND Document type: M. Send attribute class: 0. No. of recipients: 1
SX_OBJECTS_SEND Call of SX_PERFORM_RFCSEND with MAIL M RI-BEHEER
SO_CONVERTED_VERSIONS_GET Versions returned
SX_PERFORM_RFCSEND Nicht unterstützte Formate: ALI OBJ OTF SCR URL
SX_OUTGOING_VERSION_BUILD Read contents of document RAW35000000000132
SO_OBJECT_DATA_FOR_SEND_GET Object transferred
SO_OBJECT_PREPARE_FOR_SEND Object prepared for transmission
SX_SEND_DATA Structure: SXRECINFI1
SX_SEND_DATA Structure: SXEXTRECI1
SX_SEND_DATA Structure: SXPCKLSTI1
SX_SEND_DATA Structure: SXDOCCHGI1
SX_PERFORM_RFCSEND After call of function SX_OBJECT_RECEIVE Returncode: 8
SX_PERFORM_RFCSEND Structure: SXEXTRECI1
SX_GENERATE_NDR Cannot process message in node, parameters cannot be convertedHi,
The following errors in the trace file:
After call of function SX_OBJECT_RECEIVE ReturnCode: 8
Cannot process message in node, parameters cannot be converted
So the problem is caused by incorrect IMG configuration:
The SX_OBJECT_RECEIVE Returncode: 8 error message is caused by an incorrectly entered path in the RFC IMG connection (SM59) or by not calling MLUNXSND via a script.
The problem is that the mailgw.ini file not being present in /usr/sap/<SID>/SYS/exe/run/mlunxsnd or the <system_directory>/SYS/profile directory. MLUNXSND will check these two directories for a file call exactly mailgw.ini. If MLUNXSND does not find the file the error above is displayed.
I would recommend that you create a shell script per OSS Note 99965 and set the GWCONFIG parameter to point to maligw.ini.
Michael -
I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log Database Mail (Database Mail Log)
Log ID 152
Process ID 7684
Last Modified 3/14/2013 6:49:58 PM
Last Modified By SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)I'm trying to setup Database Mail and send a test message, but it's not working.
I've done several step-by-steps and all and I can't get it to work. Also checked several posts in this forum but none helped. I think it used to work before (2 months ago) but we had to turn it off.
I've enabled it in Surface Configuration, have tried recreating all profiles, restarted SQL Agent, checked version mismatch...
I check the Database Mail and I get the following message:
Log
Database Mail (Database Mail Log)
Log ID
152
Process ID
7684
Last Modified
3/14/2013 6:49:58 PM
Last Modified By
SPEEDLING\sqlservice
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Mail configuration information could not be read from the database.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession
dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
2) Exception Information
===================
Exception Type: System.IndexOutOfRangeException
Message: timeout
Data: System.Collections.ListDictionaryInternal
TargetSite: Int32 GetOrdinal(System.String)
HelpLink: NULL
Source: System.Data
StackTrace Information
===================
at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
at System.Data.SqlClient.SqlDataReader.get_Item(String name)
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID) -
Oracle workflow notification mailer configuration error
hi,
i am trying to setup oracle wf notification mailer and trying to put a test email address so that all the emails go to that email address.
but getting following message,
FAILURE: javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS command first. p5sm5221427pbd.12
my env:
Oracle R12 on Oracle Linux 5.5
smtp server: smtp.gmail.com
imap server: imap.gmail.com
outgoing and incoming: SSL enabled
my sendmail in Oracle linux 5.5 works fine and using that i am able to sent email address to outside world.
please advice on the above error that i am getting in notificaiton mailer configuration screen.
thanks,this is the latest log file for recreating the repos,
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'create' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'drop' set to true
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: VIS
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user:
Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 14, 2011 10:48:02 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1528
Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:20 AM oracle.sysman.emcp.ParamsManager setParam
Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: MAIL_SERVER_NAME value: smtp.gmail.com
Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value:
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value: yes
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LOG_FILE.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig addEMCALogFile
CONFIG: ORACLE_BASE :/u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 305783605
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: VIS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: VIS
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil getAllOracleHomeLoc
CONFIG: /etc/oraInst.loc and /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc are not the same. Getting list of homes from /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [u01/oracle/VIS/apps/tech_st/10.1.3, /u01/oracle/VIS/apps/tech_st/10.1.2, /u01/oracle/VIS/db/tech_st/11.1.0]
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.3
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.2
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: 1157 from /u01/oracle/VIS/apps/tech_st/10.1.2/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/db/tech_st/11.1.0
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /u01/oracle/VIS/db/tech_st/11.1.0/install/staticports.ini
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /u01/oracle/VIS/db/tech_st/11.1.0:localhost.localdomain:null:VIS:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_VIS value: 3938
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_VIS value: 1158
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_VIS value: 5540
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_VIS.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_VIS value: 5520
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: VIS : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: /u01/oracle/VIS/db/tech_st/11.1.0/localhost.localdomain_VIS/sysman/emd/agntstmp.txt:localhost.localdomain does not exists.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12541: TNS:no listener
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12541: TNS:no listener
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2682)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
Refer to the log file at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log for more details.
Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2689)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468) -
Delivery Note Mail Configuration
hi friends
we have the requirement for mail configuration of delivery document.
SCENARIO
Once PGI has been done , system send the mail to the customer and our logistics department Mail id.
i have maintain the mail id in the customer master, but where i maintain the logistics department Mail id.
iam using output type for delivery note, can i use that the existing out put is ZI01 or new out put type is Mail..
what are the configuration required for this setting?
with regards
dineshdear,
you would look how the standard type is set up:
and try to do the same for your own type...(did you copy it from the standard one??)
and continue configuration under the Maintain Output Det. for Outbound Deliveries:
also do not forget about the Output condition records - use t-codes VV21, VV22
regards, -
Mail Configuration in SAP 4.7 IDES
Hello,
I have SAP 4.7 IDES at my home. I want to do Mail Configuration to send mails from SAP. I do have Internet Connection.
I have done the following setting in <b>SCOT</b>.
1. In <b>SMTP</b> Node, the checkbox <b>Node in use</b> is checked
But when I send mail using a small ABAP Program it is going to SAPs <b>Inbox</b>.
I was not able to send to my <b>Yahoo mail</b>.
Do suggest if any more settings are required.
What value should be given to <b>Mail Host</b> in <b>SMTP</b> Node ?
Thanks.Hi Shashidhar,
Red icon indicates that the message could not be sent. In your program, if you are using the FM SO_NEW_DOCUMENT_ATT_SEND_API1, along with put_in_outbox option, and the mail does not come in outbox, then you can be sure that there are some mistakes in SCOT settings. If the message is there in outbox(in business workplace) and SOST shows a red, then please check your code...if you dont populate the internal tables for your messages correctly, then the mail will not be sent even though you may get sy-subrc = 0 on execution of the mail FM.
Thanks
Vijay
<b>PLZ reward points if helpful</b> -
Mail Configuration in Split DNS Setup
I am a new Snow Leopard Server admin. Was wondering about proper configuration for Mail Service in a split DNS set up. Thanks in advance for your assistance!
Here are the basic configuration details (with questions to follow):
Server's fully qualified domain name: server.domain.private
Server has a private IP address which is NATted behind the public IP address on an Airport Extreme.
Mail Service: Has public IP address on Airport Extreme and uses mail.domain.com as the internet host name. The internet domain name is domain.com
Questions:
1. In Workgroup Manager, for the mail configuration tab for each LDAP user, should the mail server be listed as the fully qualified domain name for the server (server.domain.private) or the mail service's internet host name (mail.domain.com)?
2. In Squirrel Mail server settings, should the IMAP and the SMTP local host names be the fully qualified domain name for the server (server.domain.private) or the mail service's internet host name (mail.domain.com)?
3. In Server Admin - Mail - Settings - Advanced - Security: Are the options to use or require SSL certs for SMTP and IMAP/POP only for connection between mail clients on the network and the mail server? Do they impact server to server connections for mail traffic going to a recipient outside the network?
4. In the configuration described above, is the server (server.domain.private) serving as a virtual host for the internet mail host (mail.domain.com)? If so, do we need to enable virtual hosting in Server Admin - Mail - Advanced - Hosting?
Many thanks for your assistance!The following (a) assumes you are running internal or using VPN to access the boxes, or (b) assumes you're not using a VPN and are using remote access.
1a: I'd use the internal name here; the direct path, and not sending traffic via public DNS and NAT.
1b: external, though that sends via public DNS and NAT when you're internal, unless you have split-horizon DNS running. If you have split horizon, you'd have example.com inside and outside, but with different IP addresses depending on which DNS server you're using; usually public static IP for your public DNS and private static for private DNS names.
2a: again, internal.
2b: again, external
3: Your clients should always use an authenticated path, which may or may not include TLS/SSL. The public path is non-secure, but can and should verify the reverse path for the sending server and that reverse verification can block even your own clients operating from a dynamic remote address.
4: If you're receiving mail for multiple domains, you need be a virtual host or an alias. I tend to go virtual here, as it provides the ability to have name collisions across the domains.
5: If the server is public, then it wants/needs a public DNS translation and the requisite matching forward and reverse DNS, and it wants/needs to be the MX server, or you need to configure it to use an authorized relay. That's usually through your ISP. If you go this route, this is the external path (the "b" path) described above. -
Mail configuration in SAP SOLUTION MANAGER 7.1
Hi All,
I am working on SMTP (Mail)Configuration in SAP Solution Manager 7.1. And our mail host is GOOGLE APPS.
Does any one had configured mail in SAP for hosted on GOOGLE APPS?
Does SAP will support this as it is external (mail) server?
I read note 455140, related notes and configured accordingly.
Steps I followed:
1. parameters maintained:
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180
is/SMTP/virt_host_0 = *:25000;
2. User maintained: Dialog user with S_A.SCON profile with user address as username@<companyname>.com
3.Client Assignment: (SICF): a. Host Data:Profile Parameter Number: is/SMTP/virt_host_0
b. Service data: Client 100, user: username, password: ***, language: EN.
c. Handler List: CL_SMTP_EXT_SAPCONNECT in the first position
Saved Changes n Activated.
4.SAPconnect administration (SCOT):
a. Default domain: <companyname>.com
b. Nodes: SMTP Under node:
Mail Host: smtp.gmail.com
Mail Port: 25 and also tried 587
In Internet Address Area: *
5.Scheduled periodic Job with SAP&CONNECTALL variant
6. telnet <HOSTNAME> 25000 is successful
In both cases I am getting error as:
No delivery to ishan.sangai@<companyname>.com, authentication required
Message no. XS853
Diagnosis
The message was processed successfully in the SAP system. The mail server that is supposed to receive the message for further processing requires authentication. The SAP system does not support this procedure. As a result, the message was not delivered to recipient ishan.sangai@<companyname>.com.
Information from External System
_530 5.7.0 Must issue a STARTTLS command first. p1admin@<companyname>.com
Procedure
The administration settings must be changed. The specified mail server must not request authentication.
7. I tried to telnet smtp.gmail.com 25 and 587 also
I am getting following output:
220 mx.google.com ESMTP ds5sm2193379ibb.5
HELO <HOSTNAME>
250 mx.google.com at your service
HELO <companyname>.com
250 mx.google.com at your service
MAIL FROM solman_admin@<companyname>.com ENVID=12345
530 5.7.0 Must issue a STARTTLS command first. ds5sm2193379ibb.5
Does we need to talk with Google Apps provider for any modifications to be made for this.
if yes, which changes should I request them?
Please help me to solve this problem.
Please provide links,guides.notes etc. for this scenario
Thanks & Regards,
IshanHi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan -
Mail configuration in Netweaver ABAP Trial version 7.0
Hi all,
Is it possible to do Mail configuration in Netweaver ABAP Trial version 7.0.
If yes can you get me the steps to do mail configuration.
Regards,
Dinesh.HI,
Sure you can. setup Scot in transaction scot.
Thanks,
Maybe you are looking for
-
Xcelsuis 4.5 - Export doesn't refresh data
Post Author: S Bond CA Forum: Xcelsius and Live Office I've created a number of dashboards which when previewed within the xcelsius designer refresh the data from an asp page but if I export them and then view them (or use the preview export) the dat
-
Unlock a row in alv - make fields editable
Hello, I have to solve the following problem: I am using ALV FM and I have to display a non-writable alv. When a user selects a line and clicks a button, this line must change to editable mode. I found the example below. At first glance, it seemed to
-
why does my phone get hot when charging, liker REALLY hot!? >>Personal information removed<< Message was edited by: Verizon Moderator
-
Pulling my ibook out of the closet :o)
Long Story Short: I bought this ibook in 2001/2002: serial # UV149xxx. I wasn't ready for the Mac experiance and it has been sitting in the closte untouched. I purchased an Airport card to surf WiFi and it works no problem. All I REALLY want it to do
-
i have a licensed version of Adobe Illustrator Cs 5. Am I eligible for a special pricing on Adobe Indesign?