Mail content does not load in Apple Mail 10.8.2 using exchange server

About 10 am this morning Apple Mail stopped working.  Initially, no emails could be sent or received even though connection doctor found nothing wrong with the internet connection.  At 4pm, email would load but with just the sender and the subject - no content will load.  Is anyone else having this problem with Mail?

http://support.apple.com/kb/ht4889
Migration from Mac OS X v10.4 Tiger to OS X Lion
Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
On the Mac you want to transfer data from, Restart, and immediately hold the T key.
Wait for the FireWire logo to appear on the screen.  If it does not, restart and try again.
Connect both Macs via the FireWire cable.
On the Mac you want to transfer data to, Open the Migration Assistant application.
Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
Select the option "From a Time Machine backup or other disk" and click Continue.
Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

Similar Messages

  • Mail content does not load

    iPhone 4S with 7.0.4 occasionally the body of an email does not load. It's as if the email is blank. When the email has NOT been opened, the initial body (I'm set to 2 lines) displays perfectly. When the email is actually opened, nothing appears except the header ("from" and "to").

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Since you are new to iPad .....
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • My mail system does not load image automatically

    my mail system does not load image automatically. how does that happen? what should i do to set the image load configuration?

    Although you can configure Mail to load HTML images automatically, you should think twice about doing it. The sender of the message could determine your email address, your IP address, and when you opened his message. Not what you want if you get spam, as most people do.

  • Yahoo! email does not load through ipad Mail app.

    I'm using an iPad mini and for about 1 week now the built-in Mail app does not retrieve my Yahoo! email.  When I click on the Mail icon a blank screen comes up -- no error message, no nothing, just a blank screen.  I have to use the browser to access my Yahoo! email.  I have tried deleting and re-establishing my Yahoo! email account.  I have tried re-establishing my network connection.  I have tried restoring my iPad to factory settings.  I have switched my default email account to G-mail and I receive my email just fine through the built-in app.  But Yahoo! is my primary account and I cannot get my email.  This just started in the last week.  Prior to this I have been receiving Yahoo! email just fine through the built-in app for 3 years.  But now nothing.    Also, the mail app recognizes I have new mail because the little red number pops up when new mail arrives.  But in order to retrieve the mail I have to go to the browser, and once the mail is read, the little red number disappears.
    I contacted Yahoo! support and they suggested I set up an app password if I use two-step verification.  But I don't use two-step verification.  Then they suggested checking my IMAP settings, but IMAP settings aren't accessible (that I know of) through the iPad mini settings.  So I just re-established the network settings to no avail.
    I can't help but think this is a Yahoo! email server issue, but Yahoo! doesn't mention that.
    Someone please help!

    Yahoo mail works on my Mac desktop & laptop, plus my iPad 2.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.

    Mail application does not work after upgrade to Mavericks.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

  • Document library, List content does not load in certain computers with Javascript error in status bar. Any solution?

    Hi All,
    The document library, list, discussion board contents are not loading only in certain computers.  Javascript error also appears in status bar.  How to resolve it? any suggestions?

    Hi,
    Do you have any updates?
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Reader x or xi does not load; task manager shows 750 kb memory used

    I am using windows 7 home premium 64 bits, and adobe reader x or xi sometimes does not load. However, the task manager shows that AcroRd32.exe is loaded, but only using aroung 750 kb of memory.
    I must restart windows, or at least close sesion and sometimes reader loads properly.  Sometimes the  computer must be restarted twide to adobe function.
    Does anybody has an idea why this is happening?

    I'm experiencing the exact same issue.
    I am on Windows 7 Professional x64 SP1. I have updated Adobe Reader to latest version, and do not have other older versions of Reader installed. I have tried opening reader by itself using Run As Administrator, as well as Run as Another User, and also in XP SP3 compatibility mode. I have tried to force PDF files to be opened in a browser window by right clicking them, selecting Open With and then selecting Internet Explorer. Nothing works. I have had this issue before, and SOMETIMES it will help if I uninstall Adobe Reader and reinstall, but even after re-imaging my entire PC, this issue comes back.
    As with original poster, all I get when trying to open PDF files is AcroRd32.exe showing in Task Manager and using between 700k and 1785K of memory. No matter how long I wait, nothing else happens.
    This is getting very frustrating.
    Seeing as I cannot load Adobe Reader at all, is there a way to disable protected mode without loading Adobe Reader (like with registry setting)?

  • Mail Options does not load

    I'm running Messaging Server, with the information as follows:
    iPlanet Messaging Server 5.2 HotFix 1.12 (built Feb 13 2003)
    libimta.so 5.2 HotFix 1.12 (built 12:53:23, Feb 13 2003)
    SunOS red20 5.8 Generic_117350-02 sun4u sparc SUNW,UltraAX-i2
    After an indeterminate period of time with the webmail client open, the Options page does work anymore. After clicking on the Options tab, the content changes to "Not found."
    At this point in time, the issue can be resolved by simply restarting the mail server, however, a user must first discover that it's not working before the server can be restarted.
    I was wondering if anyone else has encountered this problem or if there is a HotFix available for it?
    Thanks for your time,
    -William Chan

    Thanks for the response Jay,
    This begins to happen for all users, immediately after they login. The messenger server can be running for weeks with no problem, and then this problem occurs. At other times, it can run for a matter of hours before it happens again.
    I don't believe the user's session is timing out and we have had different users login on different computers to test it after we have noticed the options page not loading, and it's the same for all of them.
    There are approximately 3 to 4 hundred webmail users, but definitely not all at the same time. I would estimate that no more than 1.5 dozen would be connecting at the same time. They all use https if that helps.
    Thanks,
    -William

  • Mac mail sometimes does not load gmail messages

    Several times a week my mail will not load some messages. Most times it works fine. My iphone always gets the mail. What's up with that?

    When you guys say turn ON and OFF, are you referring to "show in IMAP" checkbox in the "Labels" tab in gmail?  As superwhatever mentioned, Apple initially told me to make sure these are showing so that Mail.app picks them up.  If I uncheck "All Mail" and "Important" wont that just mkae Mail.app skip downloading thosemessages that are in Important and All Mail?  Instead shouldn't Mail.app's "Inbox" be set to also incorporate those message that are in Important and All Mail?  This was so much of a headach for me back when the original problem surface that I just stopped using Mail.app and purchased Mailmate.  Since then though, I'm missing certain key functions that Mail.app has and want to take another stab at resolving this.
    On my iphone it shows that I have 18 unread messages for my company account, while in Mail.app it shows only 2 unread.  The other 16 are found in "Important."  how does this get fixed?

  • Cannot "mail contents of this page" in apple mail 4.2

    I posted this somewhat unclearly before, so here goes again:
    When I try emailing the image/contents of a web page in mail (especially if the page is a yahoo.com page), mail hangs and does not ever populate the new email page -- I have to force quit mail.
    anyone know how to fix this?
    thanks,
    tom

    Thanks, but I don't think it is just the page.
    we have two other macs in the house (one with leopard, one sl) and they don't have the same problem.
    tom

  • QuickTime Content Does Not Load When Using Safari

    For the past week or so, I've noticed that when using Safari, any QuickTime content fails to display, but instead, the QuickTime logo is displayed with a question mark in the center. That would indicate to me that Safari is not seeing that QuickTime is installed, but of course, it is. I tried actually reinstalling QuickTime, but that did not resolve the issue.
    Again, this has only started in the last week or so. I'm new to the MAC world, so my troubleshooting skills are more limited with OSX. I also have Firefox installed, and QuickTime content opens as normal when using Firefox.
    Any help would be appreciated. Thanks.
    iMac (Intel)   Mac OS X (10.4.7)  

    I have had the same problem for some time now. As well as this problem, some QT movies load into QT but the sound does not play.
    This all started when I loaded various other players such as VLC to run Windows Media Player stuff before Flip 4 Mac became universal. I have tried dumping prefs, turning off plug ins and a dozen other things between QT and Safari, including resetting Safarai and losing all my log ins etc.
    Nothing runs on say www.youtube.com We just get the big Q with a question mark over it. The keynote address released yesterday does not play with sound.
    I suggest we all look back and list what we did/installed just before the problem started and then we can compare and look for a common element.
    As to checking "block pop ups" I never had that on to begin with.
    We need to see if the problem is in Safari or Quicktime - or both. There are too many variables at the moment to narrow down the problem.
    Our other iMac which is identical does NOT have the problem - because I didn't try to load any other software on to it.

  • Mail Badge Does Not Update # of Unread Mail Messages

    My iPhone is stubbornly refusing to update my number of MobileMe unread mail messages. For some reason, it is displaying 6 more unread messages than there actually are. No if I have no unread messages, the badge reads 6. If I have 5 unread messages, the badge reads 11.
    I access MobileMe via my iMac, iPad, and iPhone (iOS 4.1). My iMac and iPad aren't having this issue. Any suggestions about how to fix this problem? Thanks in advance!

    Hi,
    Did you mean the connected Microsoft account used to Mail APP and all Windows 8.1 computer?
    If yes, it's indeed as what you describe. Since Windows 8.1 Mail app has been designed such a way that, it will keep you in logged in mode all the time so that you will be able to check your emails without logging in to the webmail. In other words, it's
    always keep session. Therefore, it wouldn't ask credential to confirm.
    However, this is not only depending on Mail App but also related with mail type security. Based on my test, Adding an Exchange email account, it will prompt to check password setting at once if you change password. Adding an Hotmail account, nothing happened
    after change the password.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Apple TV set as PAIRED, yet content does not copy to Apple TV HD

    I've been chasing this for a while now. I have the itunes library set up as PAIRED (not shared) and the content is not copying over to the Apple TV HD. Movies and Music both are failing to populate the drive.
    This stuff worked fine before I upgraded my OS yesterday.
    I restored the Atv to factory settings, reran the update and readded it to my itunes. same thing. HELP?!
    Message was edited by: Matt Meister

    I went back to restoring the factory settings (before the share/pair silliness) and I can still only stream video. My audio will copy, but my video will not populate. These are purchased files from the Itunes store.
    HELP!?

  • MAIL on my MAC does not load any new mail or delete any mail in any of my other folders

    I've been having this problem for a couple of days now. Its as if MAIL just doesn't respond to anything. I can't get any New MAIL to load. And if i try to delete anything from SPAM, JUNK... and so on. They won't delete, they just show up again after deleting.
    I restarted the computer, and checked all my settings as well. I also uodated the computer.
    MAIL works from my iphone ans ipad. Just not MACBOOK PRO.
    Any help is appreciated.
    Jimmy

    Drafts, ToDos (Notes), and Outbox are found normally in the Mailboxes folder but do not usually appear in the On My Mac section. As for Deleted Messages that may be a remnant from before you used an IMAP account or if you at one time configured Mailbox Behaviors in Mail preferences to keep deleted messages locally instead of on the IMAP server.

  • Exchange mail messages does not load

    After being using sucessfuly IPAD with Exchange Outlook anywhere (owa) for more than 6 months messages headers are downloaded but after click to check the message body, it takes a while and message can not be shown. There is any clue?
    Activesync or OWA is working perfectly when using via www.
    Outlook account in laptop also is working fine.
    Best Regards

    I'd first rule out memory issues by following the restart/reset/restore troubleshooting path.  Several users I've worked with that have had delivery issues have fixed it this way. 
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Error message when I run the Web Dynpro Project

    Dear friend, I had deploy & run project, but it's got the error message under the line: I had install NWDS V. 2.0.11 on my PC, but the project which I deployed was the version that I created by NWDS V. 2.0.9, and I had install new OS as XP Home inste

  • How do I clear all personal data bookmarks history etc and import data from safari

    I have a MacBookpro 10.6.8 and I am trying to clear ALL personal data on my new Firefox 12 (Bookmarks History etc) and then import all settings from my Safari. I've deleted the Firefox application as well as Library/application support/mozilla and Fi

  • How to create and Pass DBLINK name at the run time

    Hi, Please help me out .... ACCEPT DB_USER PROMPT 'Enter the DB user name :' like this i will get the DB_USER name and i want to create one dblink with that userbame at the runtime and in all my .sql file i have to append that user name and dblink ..

  • How do I set-up my memory amount for max speed for FCP and Motion

    Hey all, I have a Dual 2.3 G5 with (8 Gigs) Ram. I'm working with a new client. I want to set up my memory or whatever else to provide MAXIMUM processing power for FCP and MOTION. Does anyone have any recommended settings. I've maxed-our RAM. My card

  • Forms 6i

    i have following queries- 1. i have made forms using forms . i want to test these forms on clients site using forms .fmx files only.how can i do this 2.to call forms using call_form how can i avoid hard coding so that the software can be easily deplo