Mail.dat multiple postage statements

How to I generate mail.dat with multiple postage statements (with different mail dates)? I am using postalsoft business Editions 8.00c.01 and a demo of Postal File Preparation.

Please use Postage Statement Mailing date available for each Entry Point.
Thanks

Similar Messages

How is the Mailing Agent permit generated on a mail.dat

The business I work for has multiple permits, and they all appear to be associated with our CRID. I can change the Permit Holder's permit as needed, but I can't seem to change the Mailing Agent permit, and I'm not sure where the information is pulled from. The default permit that always appears on our submitted postage statements is our mailing permit that cannot mail First-Class or Non-profit, and I need to change it to our permit that can. At first I was expecting that I could switch this in Postlsoft, but the further I dig, the more it looks like PostalOne! automatically associates a permit number when it sees our CRID or Mailer ID.
Could anyone confirm this or give some assitance? Thanks

According to PostalOne! Mail.dat tech guide available on RIBBS [https://ribbs.usps.gov/intelligentmail_guides/documents/tech_guides/datspec/PostalOneMailDatTechSpec.pdf]
Mailing Agent (Preparer). This identifies the organization that prepared the mailing and/or delivered it to the postal service for mailing. This information is linked to the useru2019s login account, and is not represented in the Mail.dat file.
To attach a Mail.dat file to a preparer permit, the PostalOne! System looks at the User ID that submitted the file. The system looks at permits linked to the locations that User ID is also linked to. The system looks at the post office of mailing. The system considers finance number association of permits linked to locations to finance number of post office of Mailing. If the system finds more than one permit possibility, system takes first active (type PI) permit (could be any of the linked locations, not necessarily the one that submitted the file). For this reason the attached preparer permit may not be accurate and the user may not be able to fix it.
In the Mailing Agent block on the Postage Statement, the company name and address information found from the associated CRID in the Mail.dat MPA Preparer CRID shall be displayed. If the Mail.dat file MPA Preparer CRID is used, then the preparer permit number, telephone number, email address, or customer number will not be displayed. The submitter of the Mail.dat file may update this CRID. The owner of the CRID may update the name and address information associated with the CRID. If the Mail.dat file MPA Preparer CRID is blank, then the Mailing Agent block will be filled with the name and address information found from the preparer permit attached to the Mail.dat file (see above). The preparer permit number and the associated company name, address, telephone number, and email address will be displayed. The name and address information on this permit may be updated by the postal clerk and will apply to subsequent Mail.dat updates.

How to send mails to multiple recipents using SO_DOCUMENT_SEND_API

Hi ,
I am using the FM "SO_DOCUMENT_SEND_API".
I am able to send an Excel sheet as attachement, but my requirement is to send multiple mails to the corresponding persons. I tried using coma, colan, semi colan as the separator in the import parameter SENDER_ADDRESS for two different mail id's but it was not useful.
I need to send mails to multiple recipens using the same FM. (keeping one person in to list and two of the persons in CC.)
can any on throw some light on this.
Thanks
rewards will be great.....................................

Hi,
The code below demonstrates how to send an email to an external email address([email protected]),
where the data is stored within a .xls attachment.
Instead of the statement, <b>PARAMETERS: p_email   TYPE somlreci1-receiver
                                  DEFAULT '[email protected]'.</b>,
use select-options & give the e-mail addresses that you want.
*& Report ZEMAIL_ATTACH                                               *
*& Example of sending external email via SAPCONNECT                    *
REPORT ZEMAIL_ATTACH                   .
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver
                                  DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
             con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY
Hope this helps.
Reward if helpful.
Regards,
Sipra

Sending mail with multiple attachment

hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
       jobname like TBTCJOB-JOBNAME,
       L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4)    VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
        p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_desc1 TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des,
      gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
        p_email like somlreci1-receiver,
      END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
                       to sap-spool
                      with line-size = '255'
                       with KEEP_IN_SPOOL = 'X'
                       with IMMEDIATELY = ' '
                       WITHOUT SPOOL DYNPRO
                       AND RETURN
   NEW-PAGE PRINT ON
   DESTINATION l_c_device
   IMMEDIATELY ' '
   KEEP IN SPOOL 'X'
   NEW LIST IDENTIFICATION 'X'
   NO DIALOG.
   new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf.
    select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
      from ymail
      where ytcode = 'YMIS008'.
ELSE.
   SKIP.
   WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
           'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
                            USING SELECTION-SET 'MAIL'
                            to sap-spool
                           with KEEP_IN_SPOOL = 'X'
                           with IMMEDIATELY = ' ' "SPACE
                           WITHOUT SPOOL DYNPRO
                           AND RETURN
   NEW-PAGE PRINT ON
   DESTINATION l_c_device
   IMMEDIATELY ' '
   KEEP IN SPOOL 'X'
   NEW LIST IDENTIFICATION 'X'
   NO DIALOG.
   new-page print off.
    IF sy-batch EQ 'X'.
    gd_attachment_desc1 = 'YMIS10'.
    gd_mtitle = 'Monthly Sales Report'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf1.
   loop at it_mess_att.
    move it_mess_att1 to it_mess_att.
    APPEND it_mess_att.
   endloop.
   APPEND LINES OF it_mess_att1 to it_mess_att.
   free it_mess_att1.
    it_mess_att[] = it_mess_att1[].
    insert LINES OF it_mess_att1 into it_mess_att.
    APPEND LINES OF it_mess_att2 to it_mess_att .
     insert LINES OF it_mess_att1 into it_mess_att.
     insert LINES OF it_mess_att2 into it_mess_att.
   loop at ymis008tab into mailstr.
     p_email1 = mailstr-p_email.
      p_email1 = '[email protected]'.
       PERFORM process_email.
   endloop.
       clear mailstr.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
ELSE.
    SKIP.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att1 = gd_buffer.
    APPEND it_mess_att1.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod        = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                      it_mess_att1
                                using "p_email
                                      gd_mtitle
                                     'Testing mail generated from SAP'
                                     'Daily Highlights Abstract Report - YPP18'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                          it_attach1
                                    using "p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
   a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X   "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
   CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
Arpit

Hi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John.

Sending Mails to Multiple Recipients using UTL_SMTP

create or replace procedure send_mail(msg_text varchar2) is
c utl_smtp.connection;
PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
BEGIN
utl_smtp.write_data(c, name || ': ' || header || utl_tcp.CRLF);
END;
BEGIN
c := utl_smtp.open_connection('outlook.abc.com');
utl_smtp.helo(c, 'abc.com');
utl_smtp.mail(c, '[email protected]');
utl_smtp.rcpt(c, '[email protected]');
utl_smtp.open_data(c);
send_header('From', '"root" <[email protected]>');
send_header('To', '"abc" <[email protected]>');
send_header('Subject', 'WARNING: Salary has been changed');
utl_smtp.write_data(c, utl_tcp.CRLF || msg_text);
utl_smtp.close_data(c);
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
BEGIN
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
NULL; -- When the SMTP server is down or unavailable, we don't have
-- a connection to the server. The quit call will raise an
-- exception that we can ignore.
END;
raise_application_error(-20000,
'Failed to send mail due to the following error: ' || sqlerrm);
END;
==============
when I execute the above using
sql> exec send_mail('hihihih');
I am getting the mails..no problems...
So..I created the following trigger and used the above procedure to send the mail...
CREATE OR REPLACE TRIGGER test_emp_table_trg
AFTER UPDATE
ON test_emp_table
FOR EACH ROW
WHEN (NEW.sal <> OLD.sal)
DECLARE
l_employee_name VARCHAR2 (240);
l_old_sal VARCHAR2 (240);
l_new_sal VARCHAR2 (240);
l_message VARCHAR2 (240);
BEGIN
/* Gets the employee full name */
BEGIN
SELECT ename
INTO l_employee_name
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_employee_name := NULL;
END;
/* Gets the old Salary */
BEGIN
SELECT sal
INTO l_old_sal
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_old_sal := 0;
END;
/* Gets the new salary */
BEGIN
SELECT sal
INTO l_new_sal
FROM test_emp_table
WHERE empno= :NEW.empno;
EXCEPTION
WHEN OTHERS
THEN
l_new_sal := 0;
END;
l_message:=
'Employee Name= '
|| l_employee_name
|| 'Old Salary= '
|| l_old_sal
|| 'New Salary= '
|| l_new_sal;
BEGIN
send_mail (l_message);
END;
END;
===================
I am not getting desired output..what might be problem friends...I am getting 0 values for old salary and new salary......
One more thing..when i use 2 receipts in the send_mail procedure like this...I added the following lines in the procedure to send to multiple receipents..
======
utl_smtp.rcpt(c, '[email protected]');
utl_smtp.rcpt(c, '[email protected]');
=============
Pleas have a look and correct me, where i went wrong....
Edited by: oraDBA2 on Sep 22, 2008 3:12 PM

Hi, You can use the following routine to send mail to multiple recipients through utl_smtp.
create or replace package mail_pkg
as
type array is table of varchar2(255);
procedure send( p_sender_e_mail in varchar2,
p_from in varchar2,
p_to in array default array(),
p_cc in array default array(),
p_bcc in array default array(),
p_subject in varchar2,
p_body in long );
end;
create or replace package body mail_pkg
begin
g_crlf char(2) default chr(13)||chr(10);
g_mail_conn utl_smtp.connection;
g_mailhost varchar2(255) := 'ur mail server';
function address_email( p_string in varchar2,
p_recipients in array ) return varchar2
is
l_recipients long;
begin
for i in 1 .. p_recipients.count
loop
utl_smtp.rcpt(g_mail_conn, p_recipients(i));
if ( l_recipients is null )
then
l_recipients := p_string || p_recipients(i) ;
else
l_recipients := l_recipients || ', ' || p_recipients(i);
end if;
end loop;
return l_recipients;
end;
procedure send( p_sender_e_mail in varchar2,
p_from in varchar2,
p_to in array default array(),
p_cc in array default array(),
p_bcc in array default array(),
p_subject in varchar2,
p_body in long );
end;
is
l_to_list long;
l_cc_list long;
l_bcc_list long;
l_date varchar2(255) default
to_char( SYSDATE, 'dd Mon yy hh24:mi:ss' );
procedure writeData( p_text in varchar2 )
as
begin
if ( p_text is not null )
then
utl_smtp.write_data( g_mail_conn, p_text || g_crlf );
end if;
end;
begin
g_mail_conn := utl_smtp.open_connection(g_mailhost, 25);
utl_smtp.helo(g_mail_conn, g_mailhost);
utl_smtp.mail(g_mail_conn, p_sender_e_mail);
l_to_list := address_email( 'To: ', p_to );
l_cc_list := address_email( 'Cc: ', p_cc );
l_bcc_list := address_email( 'Bcc: ', p_bcc );
utl_smtp.open_data(g_mail_conn );
writeData( 'Date: ' || l_date );
writeData( 'From: ' || nvl( p_from, p_sender_e_mail ) );
writeData( 'Subject: ' || nvl( p_subject, '(no subject)' ) );
writeData( l_to_list );
writeData( l_cc_list );
utl_smtp.write_data( g_mail_conn, '' || g_crlf );
utl_smtp.write_data(g_mail_conn, p_body );
utl_smtp.close_data(g_mail_conn );
utl_smtp.quit(g_mail_conn);
end;
end;
begin
mail_pkg.send
(p_sender_e_mail => 'urmail',
p_from => 'urmail',
p_to => mail_pkg.array( 'urmail','othersmail' ),
p_cc => mail_pkg.array( ' othermail ' ),
p_bcc => mail_pkg.array( '' ),
p_subject => 'This is a subject',
p_body => 'Hello Buddy, this is the mail you need' );
end;
/

Executing a stored procedure containing multiple Select statements

Post Author: Beverly
CA Forum: General
I am using Crystal 10.0 against a MS SQL 2000 server.
I am trying to create a report based on a stored procedure that contains multiple select statements. The sp requires a single parameter (Claim number) and contains 17 Select statements that produce results.
I am able to use the Add command and execute the sp with the parameter, but I am only getting the results of the first select statement in the sp back in my data set. Is there a way to have the data from each Select statement returned to my report?
I have used Crystal for a while, but pretty much for straight-forward reporting. I am familiar with the basics of SQL.
I would appreciate any help anyone can offer.
Thanks.

Post Author: BISoftware
CA Forum: General
I believe Crystal Reports can only handle one recordset at a time, which means it can only handle a single select statement. The only way I can see around this would be to break up your stored procedure into multiple stored procedures, so that each only contains a single select statement. Then, use subreports to report on each individual sp. Hope this helps. - Davewww.BusinessSoftwareResource.com

Sending mail with multiple attachments

hi.I wrote a code to send mail.but i need to send mail with multiple attachments.here is the code i wrote.what should i do to send the mail with multiple attachments.if i run this code iam able to send mails but not attachments.please help me
<%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
<%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
<%
     String Attachfiles1="";
     String Attachfiles2="";
String Attachfiles3="";
if("Send".equalsIgnoreCase("send"))
          try
     String subject="",from="",url = null,to="";
     String mailhost = "our local host";
     Properties props = System.getProperties();
     String msg_txt="";
     String strStatus="";
// byte[] bin=.....;
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
String mailer = "MyMailerProgram";
to=request.getParameter("to");
from=request.getParameter("from");
subject=request.getParameter("subject");
msg_txt=request.getParameter("message");
props.put("mail.smtp.host", mailhost);
Session mailsession = Session.getDefaultInstance(props, null);
Message message = new MimeMessage(mailsession);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
message.setSubject(subject);
message.setHeader("X-Mailer", mailer);
message.setSentDate(new Date());
message.setText(msg_txt);
BodyPart messageBodyPart = new MimeBodyPart();
BodyPart messageBodyPart2 = new MimeBodyPart();
Multipart multipart = new MimeMultipart(); // to add many part to your messge
messageBodyPart = new MimeBodyPart();
javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("file_name");
messageBodyPart2.setText("message"); // set the txt message
multipart.addBodyPart(messageBodyPart);
multipart.addBodyPart(messageBodyPart2);
Transport.send(message);
out.println("Message Sent");
catch (Exception e)
e.printStackTrace();
if("Attachfiles".equalsIgnoreCase("attachfiles"))
Attachfiles1=request.getParameter("fieldname1");
Attachfiles2=request.getParameter("fieldname2");
Attachfiles3=request.getParameter("fieldname3");
%>
<html>
<body>
<div class="frame">
     <form action="Composemail.jsp" method="post">
          <b>SelectPosition:</b> <select name="cars" >
<option value="ABAP">ABAP
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select><br><br>
<table border="1" cellpadding="2" cellspacing="2">
<tr><th>Name</th>
<th>EmailId</th>
<th>ContactNumber</th>
<th>Position</th>
</tr>
<tr>
<td>
</td>
</tr>
</table><br>
<b>SelectUser :</b><select name="cars">
<option value="Administrator">Administrator
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select>
<br>
<b>To :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="to" size="72"><br>
<b>From :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="from" size="72"><br>
<b>Subject :</b>&nbsp&nbsp&nbsp<input type="text" name="subject" size="72"><br>
<%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
<b>Message:</b><br>
&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<textarea rows="10" cols="50" name="message">
</textarea> <br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname1" value="filename" size="50"><br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname2" value="filename" size="50"><br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname3" value="filename" size="50"><br><br>
&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="submit" name="attachfiles" value="Attachfiles">
<center>
<input type="submit" name="send" value="Send" >
</center>
</form>
</div>
</body>
</html>

Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over.

Send AP payment advice e-mail to multiple e-mail addresses?

Hello all,
I implemented Business Transaction Event 2040 to determine whether a vendor payment advice should be paper or e-mail. The SAP code that populates the e-mail address from the vendor's master record only uses the first e-mail address, regardless of how many e-mail addresses are entered.
Have any of you found a way to send the e-mail to all of the addresses in the vendor master address table, ADR6, without making a modification to SAP's code? I tried putting multiple e-mail addresses in the first address field. The data validation that is being performed did not allow multiple addresses.
When I asked this question of SAP, their answer was that there's nothing wrong and that they would be happy to charge for remote consulting to provide that functionality.
I know that we could create a group e-mail address within our e-mail application for every vendor that wants the e-mail to be sent to multiple recipients. Then enter that group e-mail address in the first line of the vendor master e-mail data. I don't really want to do this because this would entail AP staff requesting to have that group set up and maintained by the staff that maintains the e-mail application.
Since we have the ability to enter multiple e-mail addresses for vendors, it seems like the payment advice e-mail that is generated should send an e-mail for every entry in the vendor master.
Thanks
Bruce

Anil,
We are using program RFFOUS_T to create the payment advice. Your solution of copying that program and modifying it would work. But I don't want to go to the time and trouble of doing that.
Because the volume of vendors that have multiple e-mail addresses is small, we'll just create group e-mail addresses in our e-mail application (Lotus Notes) and use that group e-mail address in the vendor master e-mail screen.
SAP doesn't consider this an error. At best it is a serious shortcoming. I have a hard time believing that I'm the first or only customer that has asked about and for this.
Thanks
Bruce

Problem in sending mails to multiple persons

Hi,
I have a problem in sending mails to multiple people....
My mail is using the local smtp server...The mail is to be send to multiple addresses in to and cc.
for e.g the to address will have --> [email protected];[email protected]
cc address will have --> [email protected];[email protected]
How do this i.e set multiple to and cc address...
My function that sends mail from my ejb looks like this...
// create some properties and get the default Session
     Properties props = new Properties();
     props.put("mail.smtp.host", host);
     Session session = Session.getDefaultInstance(props, null);
     try{
     Message msg = new MimeMessage(session);
     msg.setFrom(new InternetAddress(from));
//I HAVE TO SET MULTIPLE "TO" ADDRESSES HERE INSTEAD OF JUST 1
     InternetAddress[] address = {new InternetAddress(to)};
     msg.setRecipients(Message.RecipientType.TO, address);
//I HAVE TO SET MULTIPLE "CC" ADDRESSES HERE INSTEAD OF JUST 1
InternetAddress[] addresscc = {new InternetAddress(cc)};
     msg.setRecipients(Message.RecipientType.CC, addresscc);
     msg.setSubject(msgSubj);
     msg.setSentDate(new java.util.Date());
     msg.setText(msgText);
     Transport.send(msg);
     }catch (MessagingException ex) {
System.out.println("\nException handling in javaMail.java :" + ex);
Please help me out with a solution!!!Thanks in advance.
Thanks
Rahul

Hi all,
Got the solution...
We have to use addRecipients method of the Message class to add as many receipts we want to set.
example: Message.addRecipients(type,address).
Thanks
Rahul

Using Yahoo, how to send an e-mail to multiple receivers without having to click on each one individually

When I try to send/forward e-mail to multiple receivers, I choose the category, use ctrl, select the names and click "send e-mail to these contacts." When I return to the e-mail, the contacts are not listed.
What am I doing wrong?
Betty Spraker

Hi,
Creat the following internal table
DATA: i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
Pass the values to this internal table as follows
i_reclist-receiver = '<give ur mail id>'. "SAPoffice: Name of the recipient of a document (also ext.)
i_reclist-rec_type = 'U'. "Specification of recipient type
*U = INTERNET ADDRESS,
*B = SAP USER,
*P = PRIVATE DISTRIBUTION LIST,
*O = SAPOFFICE USER,
*R = SAP user in another SAP System
*X = X400 ADDRESS
*C = SHARED DISTRIBUTION LIST
APPEND i_reclist.
Pass the internal table to the Tables parameter of 'receivers'
receivers = i_reclist
Regards,
Chandu

How to send multiple customer statements by email using RFKORD11 program.

Hi All,
How to send multiple customer statements by email using RFKORD11 program. Is it possible?
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
thanks in advance.
Regards,
Mahesh

Try execute the program in the background to see if that helps.

How to send multiple customer statements by email using RFKORD11

Hi All,
How to send multiple customer statements by email using RFKORD11 program.
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
Regards,
Mahesh

Hi .
You first need to copy that program to Z and make the changes in it. Can you convert sapscript to smartform?
then you can write a logic to send mail in the loop.
to send the pdf file
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/mailsendthroughoutputcontrols
Regards,
Madhuri
Edited by: madhuri sonawane on Jun 10, 2009 4:20 PM

How to return the result set of multiple select statements as one result set?

Hi All,
I have multiple select statements in my stored procedure that I want to return as one result set
for instance
select id from tableA
union
select name from table b
but union will not work because the result sets datatypes are not identical so how to go about this ?
Thanks

You have to CAST or CONVERT (or implicitly convert) the columns to the same datatype. You must find a datatype that both columns can be converted to without error. In your example I'm guessing id is an int and name is a varchar or nvarchar.
Since you didn't convert the datatypes, SQL will use its data precedence rules and attempt to convert name to an int. If any row contains a row that has a value in name that cannot be converted to an int, you will get an error. The solution is
to force SQL to convert the int to varchar. So you want something like
select cast(id as varchar(12)) from tableA
union
select name from tableb
If the datatypes are something other that int or varchar, you must find a compatable datatype and then convert one (or both) of the columns to that datatype.
Tom

Help with multiple case statements

Hello,
I am new to BO. I am on XI 3.0. SQL 2005. In Designer, I am trying to create a measure in a financial universe that would end up being multiple case statements within one select. This is what I tried to do, but it doesn't work with the two case statements. Can I use an ELSE leading into the second CASE WHEN somehow? How can I accomplish this? Sorry for my ignorance!
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 12 THEN dbo.ClientBudgetMonth.Stage1Sales END
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 11 THEN dbo.ClientBudgetMonth.Stage1Sales END
Any Suggestions?
Thanks,
Holly

Holly,
I don't know enough about your data or requirement to provide a solution, however, the construct that you post will not work because it causes you to build an object with multiple case statements when only one case statement per object is permitted. From what I see in your code I would be inclined to combine the two statements into one as such:
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month in (11,12) THEN dbo.ClientBudgetMonth.Stage1Sales else null END
Thanks,
John

Need to create a transaction for multiple select statements?

Hello,
I am a newbie and have a question about database transaction, e.g. whether/not to enclose multiple select statements (and select statements only) into a transaction.
My database is set to transaction isolation level 2: REPEATABLE READ, where dirty read & non-repeatable read are not allowed, only phantom read is allowed.
Now, in my code I have a number of methods that only contain select statements only. Since they are merely select statements, which don't do any modifications to the data, I am not sure if I am supposed to enclose them into a transaction.
However, if I don't put them into a transaction will the transaction isolation level takes into effect automatically when another user is modifying the data that I am reading? In other words, I need to make sure the select statements will never do either dirty read or non-repeatable read. But I am not sure if it is necessary to enclose multiple select statements in a transaction, since I believe putting the select statements into a transaction will put some locks to the data being read which may reduce the concurrency of my application.
Any help/advice would be very much appreciated.
Duane

You might want to try asking this on a forum that specific to your database. I suspect the answer can vary depending on the database and probably requires in depth knowledge of what the database does.

Mail.dat multiple postage statements

Similar Messages

Maybe you are looking for