Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010

Hello Guys
I have a mailflow issue, hoping someone can help with detail description, below is the setup
Exchange server 2010 SP3 with all roles in one server
Exchange server 2013 SP1 with CU6 with all roles in one server - this server is in a different subnet to the 2010 server. I am able to see exchange 2010 databases and mailboxes from Exchange 2013. For testing purposes, I have moved 3 mailbox from 2010
to 2013. These 3 mailbox, is able to send and receive email from Internet but to each other via OWA or Outlook. These 3 mailbox also not able to send to receive email from any mailbox that is still in 2010 server via OWA or Outlook. I am not planning the whole
server cutover in a go and planning to do state by stage mailbox migration so I need mailflow working properly. When I send an email from one of the migrated mailbox that is in 2013 server, I can see that the email leaves the mailbox outbox and sits in the
queue ..
Can someone please provide detailed solution what needs to be configured?
MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Similar Messages

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Exchange 2007 SP3 RU compatibility with Exchange 2013 lattest CU

Hi Team,
I have question, I want to migrate my exchange 2007 to 2013.
right now exchange 2013 already provide CU7.
My question is, is exchange 2013 CU7 compatible with Exchange 2007 SP3 lattest RU (SP3 RU15) ?
is there any limitation of version if i want to upgrade Exchange 2007 to 2013
Thanks Before

Hello,
The first thing I would say, is that the MINIMUM supported update for Exchange 2007 is SP3 RU 10, so you should be ok with RU15 installed with Exchange 2013 Cu7.
https://technet.microsoft.com/en-us/library/aa996719(v=exchg.150).aspx
The second thing I would say, and I am not sure how you're current environment is configured and how you plan on configuring your future environment, but if you are using Public Folders, Exchange 2013 CU7 changes the way public folders are handled during
coexistence. I would recommend taking a look at this blog post from The Exchange Team
https://technet.microsoft.com/en-us/library/aa996719(v=exchg.150).aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Biztalk Server 2013 does not support Windows Server 2012 R2

is there any document or statement from MS that States "Biztalk Server 2013 does not support Windows Server 2012 R2"

Hi Mohit,
I haven't come across any document, but there is a blog from Microsoft about it.
http://blogs.msdn.com/b/biztalknotes/archive/2013/10/29/biztalk-2013-compatibility-with-latest-platforms-of-microsoft.aspx
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

How to configure oracle 6i report server run time component with application server

we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).

You can run multiple instances of Reports Server in 6i.
In tnsnames.ora, for each server, have a different name and each listening to different port.
For example,
server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf

SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard

Hi,
Is SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard.
In volume licensing portal Windows Server 2012 R2 Standard is not provided in the list of OS supported for SQL server 2012.

Hi Ajit,
Besides other post, please also note that
Service Pack 1 or
a later update is needed for the support of SQL 2012 on Windows Server 2012 R2.
For more details about how to use SQL Server in Windows Server 2012 R2, please review the following KB article.
http://support.microsoft.com/en-us/kb/2681562
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Exchange Server 2013 SP1 - Optimize for Single Server Use

Hello,
i've set up Exchange 2013 SP1 with at last CU6 - get exchangeserver says:
AdminDisplayVersion             : Version 15.0 (Build 995.29)
ExchangeVersion                 : 0.1 (8.0.535.0)    - - - funny number ;-) (is this an early version???)
Yes, the annoying 16028 in the application log are running every five minutes, but thats not the main question.
Which services are needed in a SINGLE-SERVER Environment, without DAG and unified messaging?
Can the Self-Checking, Health- and Self-Probing be put down?
These services are started automatic:
   Microsoft Exchange Active Directory Topology
   Microsoft Exchange Anti-spam Update
   Microsoft Exchange DAG Management
   Microsoft Exchange Diagnostics
   Microsoft Exchange EdgeSync
   Microsoft Exchange Frontend Transport
   Microsoft Exchange Health Manager
   Microsoft Exchange Mailbox Assistants
   Microsoft Exchange Mailbox Replication
   Microsoft Exchange Mailbox Transport Delivery
   Microsoft Exchange Mailbox Transport Submission
   Microsoft Exchange Migration Workflow
   Microsoft Exchange Replication
   Microsoft Exchange RPC Client Access
   Microsoft Exchange Search
   Microsoft Exchange Search Host Controller
   Microsoft Exchange Service Host
   Microsoft Exchange Throttling
   Microsoft Exchange Transport
   Microsoft Exchange Transport Log Search
   Microsoft Exchange Unified Messaging
   Microsoft Exchange Unified Messaging Call Router
   Microsoft Exchange-Informationsspeicher
   Microsoft Filtering Management Service
   Microsoft Online Services Sign-in Assistant
And with C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue\mail.que about 512 MBytes size (which may may be a designed default size)...
Have set up about 6 users mailboxes, 3 public folder in a mailbox for public folders. Only for testing purposes sent some (small) mails, no external mails received (only testing receive with 'popcon' for mail delivery to the internal boxes).
The server (2012 R2) is running only in the internal network (yes, with internet connection for updates).
No virus scanners, not third party receive or send connectors, only the 5 default (3 Frontend, 2 Hub) receive Connectors and one Send Connector to our mail provider set up and no user activity (only sometimes from me for testing).
It seems like it's doing only with itself, logging file sizes of above 11 GB (in 4 weeks), with huge amounts of probing, health checking, internal testing, internal updating etc.
Can this logging be set up to a lower level, can services be deactivated (for single server configuration),
the logging volume should be in a useful relation to the mail use of the server, a message for every self test, internal health check etc. in the log-files normally isn't useful, only when problems occur there is a need...
Thanks in advance
Andreas

Between Exchange protocol-based log files, PerfMon .blg files used by Managed Availability, IIS logs, etc., the total footprint can add up quickly and these logs are not purged automatically. You can take a look at this site below and use the powershell
script to clean it up.
http://www.c7solutions.com/2013/04/removing-old-exchange-2013-log-files-html

Exchange Server 2013 - Lab setup with internal emails only

Hi,
I'm new to Exchange Server 2013. I've started a POC on the product by setting up a Lab environment with one 1 AD server and 1 Exchange server (Both Windows 2012 R2). As this is a POC I just need the internal email communication. I don't want the mails to
go over the internet.
I've completed the installation part and just started to configure Send/Receive connectors and got stuck with the question whether the connectors are required or not.
Could someone please help me out in configuring internal email setup for Exchange 2013 lab setup.
Regards,
Nithin

Hi,
You need not to configure send/receive connectors for internal email.
The following article for your reference:
http://technet.microsoft.com/en-us//library/aa996395(v=exchg.150).aspx
Default Receive connectors created during setup
Certain Receive connectors are created by default when you install the Mailbox server role.
Default Receive connectors created on a Mailbox server running the Transport service
When you install a Mailbox server running the Transport service, two Receive connectors are created. No additional Receive connectors are needed for typical operation, and in most cases the default Receive connectors don't require a configuration change.
These connectors are the following:
Default <server name>   Accepts connections from Mailbox servers running the Transport service and from Edge servers.
Client Proxy <server name>   Accepts connections from front-end servers. Typically, messages are sent to a front-end server over SMTP.
Each connector is assigned a TransportRole value. You can use it to determine the role the connector is running in. This can be helpful in cases where you are running multiple roles on a single server. In the case of each Receive connector previously
mentioned, their TransportRole value is HubTransport.
To view the default Receive connectors and their parameter values, you can use the
Get-ReceiveConnector cmdlet.
Default Receive connectors created on a Front End Transport server
During installation, three Receive connectors are created on the Front End transport, or Client Access server. The default Front End Receive connector is configured to accept SMTP communications from all IP address ranges. Additionally, there is a Receive
connector that can act as an outbound proxy for messages sent to the front-end server from Mailbox servers. Finally, there is a secure Receive connector configured to accept messages encrypted with Transport Layer Security (TLS). These connectors are the following:
Default FrontEnd <server name>   Accepts connections from SMTP senders over port 25. This is the common messaging entry point into your organization.
Outbound Proxy Frontend <server name>   Accepts messages from a Send Connector on a back-end server, with front-end proxy enabled.
Client Frontend <server name>   Accepts secure connections, with Transport Layer Security (TLS) applied.
In a typical installation, no additional Receive connectors are required.
Niko Cheng
TechNet Community Support

Exchange Server 2013 Hyper-V vs Physical Server & SMB3.0 vs SAN

Looking for advise on installing Exchange Server 2013 in a virtual (Hyper-V) environment or dedicated physical server installation. Also, when setting up the data storage, what's the best practices for using SMB3.0 vs direct storage SAN. We're
leaning to shared storage using SMB3.0 rather the SAN (very costly) and can use a dedicated 2012 Server with 4TB of storage (RAID 10) with (shares).
Thank you,
William

Have you tried Storage Calculator? search it on TechNet site an input the values .. If you want me to give your the specs then I'd ask
Total Send/Receive Capability / Mailbox / Day
Average Message Size (KB)
Mailbox Size Limit (MB)
Personal Archive Mailbox Size Limit (MB
If you already have an existing Exchange 2010/2007 then you can also calculate the above input.
Let me know ..
Where Technology Meets Talent

Exchange Server 2013 SP1 Install on Windows Server 2012 R2

I am trying to install Exchange 2013 SP1 onto a Windows Server 2012 R2. I get an error message that the operating system is not supported. I have installed all the prerequisite.

Does that mean that you can't install Exchange 2013 Sp1 with a Remote Desktop Role together included with Server 2012 R2?
Or is it possible to restore the Remote Desktop Role afterwards?
You can't install any build of Exchange 2013 on any server that has the RDS Role installed. So in other words, this is not a "limitation" with Exchange 2013 SP1 and Windows Server 2012 R2.
Additional Reading, check out: Exchange OWA/Activesync conflicting with RD Gateway
role
Martina Miskovic

Outlook 2013 not connect with Exchange server 2013 in internal network

Hello All,
I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network.
Can you please suggest as soon as possible.
Thanks,
Parvez

Hi,
Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
Thus, let’s try the following resolutions:
1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
3. Check if the above host name is in your certificate.
Thanks,
Angela
Angela Shi
TechNet Community Support

Renaming Windows Server 2012 Domain Controller with Exchange Server 2013

Is it possible to rename Windows Server 2012 Domain Controller, as we are using Exchange Server 2013 as a member server on Windows Server 2012 ?
We have some issues with the Domain Name, so want to rename..
Maybe somebody knows the best practices how to do this in best way???
Thanks.

Hello,
You should do the following:
1. Promote another DC.
2. Transfer FSMO roles to that server.
3. Decommission old DC.
4. Rename it.
5. Promote it again as DC.
Here is useful link:
http://technet.microsoft.com/en-us/library/cc782761(v=ws.10).aspx#bkmk_renamesingle.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

Exchange 2013 co-existence with Exchange 2010 proxying issue.

Hello,
I am testing Exchange 2010 and Exchange 2013 co-existence in my test lab at the moment, with
a view to migrating our production environment to 2013 later in the year.
The lab is setup, and the problem I'm having is that internal Outlook clients cannot open
their respective mailboxes once the 2013 CAS server is introduced into the mix.
The
setup is listed below:
EXCHANGE 2010 Servers
TESTLABEXCH01 - CAS,HT,MBX - Exchange 2010 SP3
TESTLABEXCH02 - CAS,HT,MBX - Exchange 2010 SP3
Both servers are part of a CAS Array - casarray01.testlab.local
Both servers are part of a DAG - DAG01.testlab.local
RpcClientAccessServer on all 2010 databases set to casarray01.testlab.local
The A record for casarray01.testlab.local points to the IP of the VIP of a load balancer.
The loadbalancer serves
the following ports: 25,80,443,143,993,110,995,135,60200,60201
OutlookAnywhere is enabled on both servers:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods   : {Basic, Ntlm}
Internal and external mail flow works without issue before the 2013 server is introduced.
Internal and external client access works without issue before the 2013 server is introduced.
Part Two to follow.....
Matt

EXCHANGE 2013 Servers :
TESTLABEXCH03 - CAS,MBX - Exchange 2013 SP1
OutlookAnywhere is enabled on the server:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods   : {Basic, Ntlm}
RpcClientAccessServer on all 2013 databases set to casarray01.testlab.local
(This an inherited setting I assume from the pre-existing 2010 organization)
Split DNS is in place and all internal/external URL's point to either:
autidiscover.external.com
mail.external.com
The A record for the mail.external.com points to the IP of the load balancer VIP
The CNAME record for autodiscover.external.com points to mail.external.com
When the TESTLABEXCH03 is added to the load balancer config,
and given highest priority this is when the Outlook clients stop working.
Any existing profiles in Outlook 2010/Outlook 2013 can no be opened as there is a persistent
credentials prompt.
Upon trying to create a new profile, the process errors when reaching the "Log onto server"
stage and again prompts for credentials.
Running the test-outlookconnectivity cmdlet from
either of the 2010 servers produces the following results.
[PS] C:\Windows\system32>Test-OutlookConnectivity -Protocol:http
ClientAccessServer   ServiceEndpoint
Scenario                            Result Latency
TESTLABEXCH02 autodiscover.external.com    Autodiscover:
Web service request. Success 343.20
TESTLABEXCH02 casarray01.testlab.local       RpcProxy::VerifyRpcProxy.
Success    0.00
TESTLABEXCH02 casarray01.testlab.local         RFRI::GetReferral.
Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local        NSPI::GetProfileDetails.
Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Connect.                   Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Logon.                     Skipped   -1.00
If remove the 2013 CAS server from the loadbalancer config and
all connections go directly to the 2010 servers again, all of the above tests pass and Outlook connectivity is also restored.
IIS has been reset on all 3 servers incidentally, following any changes made whilst troubleshooting.
I'm struggling to see what I'm missing here, if anyone can assist in troubleshooting this
matter further, or point out any errors in my setup it would be greatly appreciated.
Regards
Matt
Matt

Schedule SharePoint Server 2013 discoveries along with SharePoint Foundation 2013 discoveries

Hi
So I'm trying to add the SharePoint Server discoveries in SCOM 2012 - pasted the code straight of the MS guide into the config file:
    <Workflow Id="MOSSInstallation.Discovery;WACInstallation.Discovery;SearchExpressInstallation.Discovery;SearchStandardInstallation.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery"
Times="1" />
    <Workflow Id="SPService.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
    <Workflow Id="SPSharedService.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
    <Workflow Id="SPSharedService.Discovery.WAC" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
However when I run the "Configure" Task I get the following error: (NOTE - I discovered that the Dir "Monitoring Host Temporary Files 28803\2522979" does not even exist - )
The Event Policy for
the process started at 8:13:26 AM has detected errors in the output. The
'StdErr' policy expression:
.+
matched the
following output:
Exception calling
"GetDiscovery" with "1" argument(s): "An object of
class ManagementPackDiscovery with ID fedca251-56d5-be00-d6af-9cae645d6f36 was
not found."
Failed to find
workflows WSSInstallation.Discovery in Microsoft.SharePoint.Foundation.Library
Command executed:
"C:\Windows\system32\cmd.exe" /c powershell.exe -NoLogo -NoProfile
-Noninteractive "$ep = get-executionpolicy; if ($ep -gt 'RemoteSigned')
{set-executionpolicy remotesigned} & '"E:\Program Files\System Center
2012\Operations Manager\Server\Health Service State\Monitoring Host Temporary
Files 28803\2522979\AdminTask.ps1"'
'Microsoft.SharePoint.Foundation.Library.mp.config'"
Working Directory:
C:\Program Files\System Center Management Packs\
One or more
workflows were affected by this.
Workflow name:
Microsoft.SharePoint.ConfigSharePoint
Instance name:
Microsoft SharePoint Farm Group
Instance ID:
{6CB0A80D-D833-26EA-13C1-0CA48A57F5E2}
Management group:
Error Code:
-2130771918 (Unknown error (0x80ff0032)).
If anyone has any ideas that would be great -
J

Hello Jon,
Thank you for your question.
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010

Similar Messages

Maybe you are looking for