Mail does not show images anymore server stopped responding on my iPad 2 when attempting to browse web

Over the last couple of days my ipad 2 has started to play up. First the mail would not show images in mail then when trying to browse the web it now will not open any pages. I have attempted a wipe & reload but still no difference.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Similar Messages

HT201774 my SENT mail does not show up in my iphone

my SENT mail does not show up in my iphone and will not sync with the rest of my mail

IF you are talking about Exchange on Google with Gmail (ie chose exchange and using m.google.com) here is what I did to fix it.
Using your browser, sign into Gmail. IF, NEAR THE BOTTOM of your folder lists, you have a label(folder) on the left side called "Sent Items" then delete it (mine never had anything in it and i think it's for conversations.) BTW, I KNOW this is a Junk E-Mail (remember i already deleted my folder) but wanted to show you the drop down and Remove Label option.
Then go to your Settings -> Mail, Contacts, Calendars -> Exchange -> Mail Folders to Push -> and put a checkbox next to SENT (looks like a paper airplane)
backout, go back into mail -> Exchange -> and you should then see the same paper airplane there.
What was happening with mine was it would show up and then disappear as soon as it synced. The only thing i can think of is that GMAIL has a folder called SENT xxxxx (that I deleted above) that confused the iPhone and i believe it's for Messages not Mail (via google talk)
Once that was deleted, Voila! No more missing sent mail. Also, it has showed up on my iPad again.
Hope this helps.

Double clicking a new e-mail does NOT show whole e-mail

double clicking a new e-mail does NOT show whole e-mail unless I go to forward or reply. In other words, I may see a couple sentences, then it's just blank, no scroll bar either. This gets annoying. Anybody else get this or know how to overcome this?
eMac 800mHz Mac OS X (10.4.6)

Well, there is no such thing as an AOL type account in Mail. Such an account must be set up as either POP or IMAP. Nevertheless, knowing that the ISP for one of the accounts is AOL is useful because it seems that other people also have this problem with AOL -- see Chuck Coulson's and smackwell's posts in this thread.
I don't think I'll be able to help you with the AOL account other than telling you to try rebuilding the mailbox -- select the mailbox and choose Rebuild from the Mailbox menu. Have you tried that?
The problem shouldn't happen with the POP account, however. Do you experience the same problem with it as well?

I am getting Safari can not open page. Server stopped responding. I have tried several things with no luck. Anyone know what to try?

I am getting message Safari can not open page. Server stopped responding. I have tried several suggestions but they have not worked.

This is on an iPad, correct? Are you sure you have a network connection? Is your iPad Wifi or Wifi & 3G? I know these might seem like dumb questions, but we've got to narrow it down to get a solution. If you're absolutely positive you have an active network connection we can move on to other things.

Iphone 4 error message while in wifi "safari can not open page because server stopped responding" after iOS6 update

I am currently using my Iphone 4 in wifi networks only after canceling my cell phone plan. Over the weekend I did the IOS6 update on the iphone as well as updated my macbooks itunes and OS X operating systems updates that were available. Since that my iphone's safara app won't connect. After it trys to connect for a minute or 2 I recieve the message: "safari can not open page because server stopped responding". However ALL other apps that require the phone to be connected to wifi for use work properly, i.e app store, imessage, pinger, facebook, etc. I have checked all network setting and they looked right to me. Anything I'm missing, ideas to try, or am I sol (lol)? Safari worked perfectly before the update so I thought I might have done something wrong or forgot to change some type of setting.
Thank you!

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

Imac not showing the contents of my classic iPod and iPad when i connect them to the iMac?

imac not showing the contents of my ipod classic and ipad when i connect them to my imac?

That's not much to go on.
What operating system and version are you using? Are you using the most recent version of iTunes? If so, did you update prior to this happening? What other changes might have triggered this? What troubleshooting have you done already and what was the result?

FF5 does not show images that are 'moved permanently' (http response 301)

Our web app shows maps from OpenStreetmap. The webapp is secure, that is, is uses HTTPS. Now, IE complains horribly when the web page tries to load <img> via HTTP, because it's mixed content that that is considered baad.
So our webapp serves the images by responding via HTTPS with a 301 (moved permanently) to the real OpenStreetmap URL (with is HTTP). That fools IE to not complain.
Now, Firefox 5 suddenly does not show the map images AT ALL. This has worked beautifully with previous version (and all other browsers).
What's wrong?

I fixed the problem. (YAY!)
It was the way I embedded the files -- the Dreamweaver default does not work properly so I used the embed from this generator: http://www.bobbyvandersluis.com/swfobject/generator/index.html#alternativeContentHelp which now lets my navbar and swfobjects load properly. I also made sure that my slideshow (loader.swf) was set with wmode = opaque while the navbar is set to wmode = transparent. The div for the nav bar has z-index set to 5 while the div for the slideshow has z-index set to 1. Both have absolute positioning. I hope this helps anyone in the future that has trouble with overlaying flash (.swf) files.
Thanks for your reply and trying to help me solve this issue!

Muse 7.0 plus Chrome: browser does not show images full browser width

Hi there,
I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
Of course I already restarted application and computer. System: Mac OSX Mavericks.
What to do now? The presentation with the client is very soon and this bug makes me very nervous.
Best,
bartl

The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

HTTP_server link does not show in Application server control...

Hi, I'm trying to configurate OAS 10g and HTTP Server, when start OAS all the proccess start up, including HTTP Server, but then when try to configurate HTTP_server in Application server control I can't access it, because this component has no 'link' below its name ... why? I can see HTTP_server is up, but can not access it!
help

Hi Pratap, Sumit,
I did do the steps afresh now but still teh issue persists,
1) Download the complete classes/oracle/apps/per folder to my local desktop myclasses/oracle/apps/per in Binary mode.
2) In Jdeveloper i created a new OAF Workspace and Project and mentioned the default package as oracle.apps.per
3) In myprojects/oracle/apps/per/selfservice/hierarchy/server i copied only the XML files (VO,View Link) from the server in Binary mode and the PG.xml from the database using the export batch program.
4) Close and open Jdeveloper and you can see the PG.xml in webui folder and only the view object xml files in server folder. View Links do not show up eventhough they are available in the folder. Even the server.xml file which is available in the folder does not show up in Application Navigator.
Please let me know if i have missed any step which you had mentioned.
Thanks, Suresh

My Ipad does not show it is in the right city, My Ipad does not show it is in the right city, My Ipad does not show it is in the right city

My ipad 2 does not show it is in the right city if I check it on mobile me...anyone else have that problem?

At the time you check your iPads location through MobileMe, your iPad would need to have access to and be connected to the internet.

Could not open the page server stopped responding

Safari Version 2.0.4 (419.3)
This dialogue:
"Safari could not open the page “http://www.newyorklife.com” because the server stopped responding."
And in these browsers:
Firefox:
"The connection has timed out. The server at www.newyorklife.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
MSIE
" A connection failure has ocurred."
Opera - couldn't connect
Is it a System problem or what?
Using Asante FriendlyNet ethernet hub, neither a G4 desktop or an iBook can connect to these sites:
<mainstayfunds>
http://206.210.18.59/
http://206.210.28.59/
<newyorklife>
http://206.210.18.33/
http://206.210.28.33/
My ISP provided the DNS information to try (Of course, the ISP can access all the sites on PC and Mac. And other Mac users with this same cable ISP can also access these sites.)
But in my case, these actions were all unsuccesful:
Used 4 browsers
Bypassed hub and connected Mac to cable modem directly
Disconnected power from cable modem 2 minutes
Disabled Norton Firewall
Used different hub port
Restarted
Signed out
Deleted Safari plists
Deleted Cookies
Emptied Safari cache
Deleted Safari cache folder
Dragged InputManagers from their folders
Repaired permissions
No duplicate fonts found
No Network Proxies enabled
TCP/IP setting of the computer is set to DHCP - obtaining IP
address and DNS server IP address automatically.
G4 1.0Ghz Mac OS X (10.4.9) Safari Version 2.0.4 (419.3)

I am having the same issue. Its says that the server has stopped running. THis has gone on for three days straight. First time it fixed it by powering down the unit, the next time it worked resetting the network settings. Now its happened again and these two options do not work either. What do I do or what could be wrong??

HT1923 Hi, I have a iPod touch 4th generation and I does not show in iTunes. It comes up as charging when it is plugged into the computer but just not in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

Hi, I have a iPod touch 4th generation. It comes up as charging when it is plugged into the computer but it does not show in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

Try here > - http://support.apple.com/kb/TS1369.

Bridge does not show image previews anymore on one of my drives

Bridge isn't showing image previews on one of my drives. I have tried resetting the preferences as well as deleting the cache to no avail.

I don't believe so, because it operates as expected in finder. It's only bridge that doesn't seem to want to create the thumbnails. I went to the thread you posted, Robert, but unfortunately I'm not on Windows and don't see any "online" or "offline" options.
Transporter is not a cloud service. It's actually a local hardware device, so it's more a network drive than anything else.

Mail does not use correct outgoing server

Problem
Mail in Mavericks (and also IOS6 snf 7) does not use the outgoing smtp server associated with the account being used. This results in either a failure to send or mail being put into the wrong "Sent" folder.
Background
I have most of my non-icloud mail pulled down to a home server from which my laptops and ios devices access various accounts using imap. The local home server also provides smtp and relays all mail to my ISP. Recently I have been switching from an old home server (Mac Mini) to a new one (Raspberry pi running the debian Raspbian version with fetchmail, Dovecot and postfix setup).
While making the changeover I had access to both the old server and the new server enabled on my laptop. Naturally the majority of the settings (Name, email address etc) were the same although the name and address of the server to be used for both incoming and outgoing mail were different. This seemed tp work fine for incoming. However when I tested outgoing mail the copy that should appear in the "sentt" box went missing. This usually indicates some mistake in the setting of the sent mail folder on the accounts but this all checked out.
I eventually found the missing outgoing mail intended to go through the new server in the sent box on the old server. Further trials showed that no matter what I did the outgoing would always default to the old (and therefore first set up) outgoing server.
Deleting the old account and the old outgoing server of course should cure the problem and will eventually be the solution for me when I kill the old server. But i wanted to get to the bottom of the problem in case it reappeared in other contexts. Checking the "use only this server" box produced failure to send rather than the correct result.
Trialing various alterntaive settings showed that the problem occurs when there are two outgoing servers with the email address in the settings and the user name on the outgoing server name being the same. I had assumed that changing the description field would distinguish between the various settings; however this did not work. Changing the Name Field did work eg by putting (O) after my name.
It appears therefore that mail selects the outgoing server on the basis of email address (with the full name included) and user name (trrespective of the actual server or the Description that shows in the smtp server listing. In some ways this is logical but it produces problems in the context I have described and would also be a difficulty if you wanted to use an alternative server when in a different location.
I have trawled support and elsewhere for any thing similar. Lots of mail problems (don't get me started on the way icloud loses outgoing each time you edit the list!) but I have not found any posts on precisiely this point.
IOS devices seem to have similar problems, but a quick attempt at a similar solution does not work, and I cannot be bothered to test the options. I will simply clean them out and put in the new accounts.
Advice
Grateful for any comments or advice from people who have encountered similar problems and whether my diagnosis if correct. Have I missed any obvious corrections that would clear this up. I do not know whether this is a Mavericks issue or also appears in earlier OSX versions.
CPE

Peter,
Where ever the Sent and Trash folders show in the Sidebar, highlight first one, and then the other, followed by clicking on Mailbox in the Menubar, and choosing Use This Mailbox For, and choose the function.
Keep us posted on your progress.
Ernie

Mail does not show as running nor is it displayed in Cmd-Tab rotation

I know that with Lion, the idea was that it shouldn't matter to the user if a program is currently running or not. So the blue dot in the dock was by default off. A lot of beta testers complained and the option to turn it back on was included. Somewhere in the last few months, Lion updates have changed something behind my back. When I run Mail, the dock blue light never shows even though it does for programs not provided by Apple. But Mail, Safari, iCal, and probably others do not show the blue dot when running. (BTW, in case you haven't read clearly what I wrote, since non-Apple dock icons show the blue dot, it means i HAVE SET THE SHOW INDICATOR lights option in Settings / Dock.)
What is far far worse is that when I press Cmd-Tab, none of these Apple programs (standard programs installed with OS X or programs from iWork or Aperture) are displayed in the cycle of programs I may switch among! I now must either click on the dock Icon with a MOUSE (extra hand movement) or click on a part of ghe window again with a Mouse. While I use the mouse a lot, having many years of pre GUI experience with only a keyboard, I developed a style of minimal movement. If my hands are on the keyboard, I don't want to pick up the mmouse unless there is no other way. Similarly if I'm using the mouse I don't want to go to the keyboard except for a good cause. Up until now, I've been able to do this with OS X (or dare I say with Windows). I've used a version of Mountain Lion and don't recal seeing this issue.
I have looked through out the setttings pages and tried preferences in each Apple application and I cannot find an option to re-enable the proper behavior of Cmd-Tab. Anyone know a way to fix this?
Thanks,

Some info regarding IMAP
http://support.apple.com/kb/PH2585
http://email.cityu.edu.hk/faq/popimap.htm
http://help.yahoo.com/kb/index?page=content&id=SLN3769&locale=en_US&y=PROD_MAIL_ ML
http://techchannel.radioshack.com/difference-between-imap-pop-account-apple-mail -2189.html
It is a newer protocol for mail, almost every provider has switched to it, and POP is virtually gone. It helps in syncing across multiple devices, and everything happens at the server (for the most part) at first you will see lots of activity that you will not recognize, but in time it seems to calm down and you will become used to it. When I first switched I thought I was going to lose my mind..be patient, it has become much better after some time As long as you get your mails, you may see some syncing occurring, not to worry.
Also you can contact your email provider for further info as to how "they do it"(some set-ups are different for each provider) and if there are settings that you may want to use to make it more to your liking.
Hope you find some help here

Mail does not show images anymore server stopped responding on my iPad 2 when attempting to browse web

Similar Messages

Maybe you are looking for