Mail email failure

Help needed please!
With my work email i'm unable to send reply email to colleagues off my iphone. I can from macbook. I receive the following message:
Cannot Send Mail, A copy has been placed in your Outbox. The recipient "<colleague's email>" was rejected by the server because it does not allow relaying.
How do i correct this?
Thx
A

Possible fix but the following was provided:
We have 10 other mail accounts with the same isp,
and this machine is the only one doing it.
So it appears this account and 10 other accounts with the same ISP are being accessed with the Mail.app on at least one other Mac or with another email client on what might be a Windows PC since we don't know what the other "machine" designates. Since this machine is the only one doing it, I'm not sure if RSET will help.

Similar Messages

TS3276 Mail Delivery Failure Msgs for emails I Never Sent

On Feb 7 I received 37 Mail Delivery Failure messages, but I never sent any of these emails. I was not even on my Time Warner email account that day. This is a recurring issue. Any suggestions?

Potential Spam. I would also change my e-mail password just in case your account has been hacked.
http://blog.onlymyemail.com/delivery-status-notification-failure-virus/

I can not use Safari because I get a server failure message. The same with email. Cannot get mail, server failure. How do I fix

I Cannot use Safari to access my bookmarks, I get a server failure message. The same is happening with my email. I get a message cannot get mail, server failure. How do I fix the problem?

It might be worth a shot to reset your router first. Unplug it from power for about 30 seconds and then plug it in again. Or try any other WiFi network and see what happens.

Mail delivery failure messages for email I have not sent to contacts I do not know.

I am receiving Mail delivery failure messages for emails I have not sent; they are addressed to contacts I've never heard of, many different. Apparently, this is some kind of spam but I don't know what to do about it.

There is nothing you can do about it. It will stop at some point.
http://en.wikipedia.org/wiki/Backscatter_%28email%29

Apple Mail Assertion Failure

Hi,
My company uses Office 365 for hosted Exchange email. We have 1 user who uses Apple Mail on OSX 10.7 to connect to the server in Exchange mode (using EWS). This was working great until a few days ago where he has sporadic connection problems. Reproducable situation below:
1) Select 100 emails in any given folder
2) Drag/drop those emails into another folder to move them there
3) They will start moving but it will fail at somepoint and give the message "Cannot execute move operation".
4) After that message appears it is usually several minutes before he can try again or send any emails.
5) Trying to send an email immediately after the error message results in the "Cannot send message using the server" dialog where you are prompted to select a different server to send the message. Choosing an SMTP server results in the message being sent but sometimes (and only sometimes) the message is resent a couple of hours later through the exchange system.
We are getting a million of the following assertion failure messages in the console:
06-06-2012 12:22:05.518 Mail: *** Assertion failure in -[EWSGetFolderResponseOperation handleResponseMessage:withObject:], /SourceCache/Message/Message-1278/MessageStores.subproj/EWSResponseOperation.m: 340
EWS did something wrong: An internal server error occurred. The operation failed. on EWS response <EWSGetFolderResponseOperation: 0x7fb9cb1ae620> (EXECUTING)
0   Message 0x00007fff8f712ef8 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 116
1   Message 0x00007fff8f71308e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 185
2   Message 0x00007fff8f662c64 -[EWSResponseOperation handleResponseMessage:withObject:] + 556
3   Message 0x00007fff8f656eb6 __-[EWSGetFolderResponseOperation executeOperation]_block_invoke_1 + 77
4   CoreFoundation 0x00007fff87979cee __NSArrayEnumerate + 718
5   Message 0x00007fff8f6572ae -[EWSGetFolderResponseOperation executeOperation] + 453
6   Message 0x00007fff8f73397f -[MonitoredOperation main] + 228
7   Foundation 0x00007fff9152e6b4 -[__NSOperationInternal start] + 705
8   Foundation 0x00007fff91541912 ____NSOQSchedule_block_invoke_2 + 124
9   libdispatch.dylib 0x00007fff8a798a86 _dispatch_call_block_and_release + 18
10 libdispatch.dylib 0x00007fff8a799965 _dispatch_worker_thread2 + 255
11 libsystem_c.dylib 0x00007fff8c83b3da _pthread_wqthread + 316
12 libsystem_c.dylib 0x00007fff8c83cb85 start_wqthread + 13
06-06-2012 12:22:05.518 Mail: Recieved EWS error: Error Domain=MFEWSErrorDomain Code=94 "An internal server error occurred. The operation failed." UserInfo=0x7fb9cecbb7c0 {NSLocalizedDescription=An internal server error occurred. The operation failed.}
We have tried deleting the account and making a new one. As well as removing the mailbox folder (~/Library/Mail/V2/EWS-*) and the Apple Mail plist file. We have also setup the email on a different Mac (also OSX 10.7) but we still get the same assertion failure message.
This user's email account works fine in Outlook on Windows and Mac (Outlook 2010 and 2011) and it also works fine through the online web portal. Outlook 2011 Mac uses EWS (the same protocol Apple Mail uses) and it's not throwing any errors and everything works properly so that is leading me to believe it's an issue with Apple Mail.
Perhaps related, perhaps not, but the user's iPhone and iPad have also stopped working properly with the account. They will sometimes connect but a lot of the time they give an error message about not being able to connect to the server. This leads us to believe it's an exchange server problem, but then why does it work in Outlook and the online portal without any problems? It's only the Apple products that are falling apart.

I ended up having to reproduce the problem in Outlook 2011 Mac before O365 support would help me. Apparently Apple Mail isn't one of the officially supported clients so they weren't going to figure it out for me. Once they ran out of ideas they just gave me the "Apple Mail is officially supported" excuse and stopped helping me.
Although we weren't initially having the problem in Outlook 2011 Mac it did start giving tons of errors during certain operations (with a -19907 error code) after a while. Not sure why it started doing that ... but it did. This was only happening with one of our user's accounts so it had to be something server-side that was the problem. I eventually got a support ticket in their system (despite being a P1 plan holder) so that they could call me. We did some Wireshark capturing to try to diagnose the problem but by that time the problem had fixed itself.

Intermittent mail sending failure - net_io_connectionclosed

I am using:
SQL Server 2012 (Service Pack 2 - Business Intelligence Edition) 11.0.5058
.Net Version 4.5.1 (378675)
Windows Server 2012 R2 Standard
Exchange Server 2010 R2 (Hosted on a seperate server)
I am getting the following error in the Reporting Services log intermittently for reports:
emailextension!WindowsService_15!7cc0!10/16/2014-06:05:33:: e ERROR: Error sending email. Exception: System.Net.Mail.SmtpException: Failure sending mail. ---> System.IO.IOException: Unable to read data from the transport connection: net_io_connectionclosed.
at System.Net.Mail.SmtpReplyReaderFactory.ProcessRead(Byte[] buffer, Int32 offset, Int32 read, Boolean readLine)
at System.Net.Mail.SmtpReplyReaderFactory.ReadLines(SmtpReplyReader caller, Boolean oneLine)
at System.Net.Mail.SmtpReplyReaderFactory.ReadLine(SmtpReplyReader caller)
at System.Net.Mail.CheckCommand.Send(SmtpConnection conn, String& response)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
--- End of inner exception stack trace ---
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
notification!WindowsService_15!7cc0!10/16/2014-06:05:33:: i INFO: Notification d4b91fc4-0cc5-464a-a927-af8c24e4fcc8 completed. Success: True, Status: Failure sending mail: Failure sending mail., DeliveryExtension: Report Server Email, Report: Missed NDD
Despatch, Attempt 0
They try to send the mail via an exchange server that is hosted on a separate server, the report server email is set up as:
<Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
<MaxRetries>3</MaxRetries>
<SecondsBeforeRetry>900</SecondsBeforeRetry>
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>****.****.****</SMTPServer>
<SMTPServerPort>
</SMTPServerPort>
<SMTPAccountName>
</SMTPAccountName>
<SMTPConnectionTimeout>
</SMTPConnectionTimeout>
<SMTPServerPickupDirectory>
</SMTPServerPickupDirectory>
<SMTPUseSSL>
</SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>
</SMTPAuthenticate>
<From>****.****@****.****</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats>
</PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName>
</DefaultHostName>
<PermittedHosts>
</PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
</Extension>
I have starred out some details for anonymity. I have other servers with a matching configuration file as above (although on a 2008 version of SSRS) that never have this problem.
The issue is intermittent and doesn't affect one specific report and on some occasions the retries work however quite often they don't work at all. I have had the network guys here monitor the port to see if the mail is even leaving the server and apparently
the failed attempts do not register any data in wire shark. I don't believe this to be a size issue with the reports as they aren't supposed to deviate much.
Any help would be much appreciated.
Dave T

Hi behavedave,
According to your description, you have data-driven subscription failure randomly. Right?
In this scenario, there's nothing wrong on your subscription configuration. Since the issue happens randomly, we can hardly to figure out reason directly. Here are two articles about subscription monitoring and troubleshooting. Please refer to links below:
Monitoring and Troubleshooting Subscriptions
Troubleshooting Subscriptions: Part II, Using the Reporting Services Trace Log File
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Create a rule on mail delivery failure

Hello,
Is it possible to create a rule in the Groupwise client, that when a message bounce back (mail delivery failure) from our relay provider, that the email will be forwarded to an internal recipient.
At the moment I cant get it to work. Moving that bounced email to a folder in Groupwise does work.

Originally Posted by laurabuckley
Hi,
I've just created a rule to test the above scenario and have built the rule as follows:
When new mail is received and subject contains "mail delivery failure"
then
Move mail to folder called Undeliverable
then
Forward message as attachment (my preferred forward method to preserve mime header information) to [designated address]
End Rule Processing
I've tested the above rule and it works perfectly on my GW8.0.2HP2 system with GW8.0.2HP3 client.
Perhaps post more details of your rule here and we can assist you with troubleshooting it.
Cheers,
I have a very similar issue to this. If I have a bounce back, I want to have that email address extracted to another doc... can be anything... TXT file, Word, Excel.... just something where I can maintain bad emails. Any Ideas anyone?

The mail could not be sent to the recipients because of the mail server failure.

Hi,
I am configured Database Mail,But i am getting below error while i am sending Test mail.
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 4 (2014-03-10T15:54:11). Exception Message: Cannot send mails to mail server. (The SMTP server requires a secure connection or the client was
not authenticated. The server response was: 5.7.1 Client was not authenticated).
Pls help me,
Thanks - SelvaKumarSubramaniam.Please MARK AS ANSWER, if my answer is useful to U.

Hi Selvaons,
I would suggest you contact your mail administrator for assistance. Here are some good articles regarding how to configure database mail in SQL Server for your reference, please see:
http://blog.sqlauthority.com/2008/08/23/sql-server-2008-configure-database-mail-send-email-from-sql-database/
http://www.codeproject.com/Articles/29060/SQL-SERVER-Configure-Database-Mail-Send-Email
http://www.sqlservercentral.com/blogs/databaseexpertisecom/2010/05/12/database-mail-set-up-in-sql-server-2008/
Regards,
Elvis Long
TechNet Community Support

Random mail arrival failure. SMTP log reports arrival, user never gets it

Our 10.5.4 Mail server has become progressively less and less reliable over a period of months. I can reproduce repeatable (but inconsistent) instances of mails sent to us and failing to arrive. The weirdness even extends to emails sent from outside to multiple recipients on our server *in the same email*, and where some of the recipients get it and the others don't (while the non-recipients are randomly receiving other mails OK). Or, an external sender sending an email while I'm on the phone with him, it failing to arrive (and never does), and then a resend half an hour later arrives immediately.
Needless to say, confidence in our mail server is plummeting.
The OS-X Server mail log *actually records a mail arrival event* even when the user never gets the email, thus:
Aug 6 13:15:42 dreadnought postfix/smtpd[14462]: connect from sonar.wycliffe.nsw.edu.au[192.168.9.100]
Aug 6 13:15:42 dreadnought postfix/smtpd[14462]: 39D248C515F: client=sonar.wycliffe.nsw.edu.au[192.168.9.100]
Aug 6 13:15:42 dreadnought postfix/cleanup[14464]: 39D248C515F: message-id=<[email protected].l ocal>
Aug 6 13:15:42 dreadnought postfix/qmgr[100]: 39D248C515F: from=<[email protected]>, size=29520, nrcpt=1 (queue active)
Aug 6 13:15:42 dreadnought postfix/smtpd[14462]: disconnect from sonar.wycliffe.nsw.edu.au[192.168.9.100]
Aug 6 13:15:43 dreadnought postfix/smtpd[14471]: connect from localhost[127.0.0.1]
Aug 6 13:15:43 dreadnought postfix/smtpd[14471]: 0BBFE8C5170: client=localhost[127.0.0.1]
Aug 6 13:15:43 dreadnought postfix/cleanup[14465]: 0BBFE8C5170: message-id=<[email protected].l ocal>
Aug 6 13:15:43 dreadnought postfix/qmgr[100]: 0BBFE8C5170: from=<[email protected]>, size=29969, nrcpt=1 (queue active)
Aug 6 13:15:43 dreadnought postfix/smtpd[14471]: disconnect from localhost[127.0.0.1]
Aug 6 13:15:43 dreadnought postfix/smtp[14466]: 39D248C515F: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.85, delays=0.01/0/0.01/0.83, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 0BBFE8C5170)
Aug 6 13:15:43 dreadnought postfix/qmgr[100]: 39D248C515F: removed
Aug 6 13:15:43 dreadnought postfix/pipe[14473]: 0BBFE8C5170: to=<[email protected]>, relay=cyrus, delay=0.23, delays=0.01/0/0/0.21, dsn=2.0.0, status=sent (delivered via cyrus service)
Aug 6 13:15:43 dreadnought postfix/qmgr[100]: 0BBFE8C5170: removed
...and the upstream mail filter (sonar in this case, our virus and spam filter) corroborates that an email arrived as well. But, as I said, the user (me) +never got this email+. Numerous other users report the same experience. Some mails arriving at our mail server simply never get put into inboxes and disappear. Poof.
The only lead I have is multiple instances of the following message in the console at (roughly) the same time as the mail arrival failure:
*6/08/08 1:15:00 PM com.apple.launchd[1] (0x11a220.cron[14553]) Could not setup Mach task special port 9: (os/kern) no access.*
I have taken to rebooting the server twice daily to reduce the frequency of these occurrences. The machine is a G5 XServe hosting 700 accounts in a School.

In the log example quoted above, ignore all the http:// references. Apple's discussions software is assuming the square brackets in the log mean "insert URL"

Mail server failure. connection refused. too manay connections - when using sp_send_dbmail with job agent

Hello All,
I've a weird problem when I'm using "SP_Send_dbmail" to send a simple e-mail to two recipients using job agent.
The code i write is:
exec msdb.dbo.sp_send_dbmail
   @profile_name= 'Send Reports',
   @recipients = '[email protected] ; [email protected]',
   @Copy_recipients = '[email protected]',
   @Body = 'Whatever will be here',
   @subject = 'Daily Reports',
   @file_attachments = 'd:\MyFolder\MyFile.txt';
The error i receive is:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-03-03T14:57:17). Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response
was: service not available (connection refused, too many connections)).
Does any one know why i get such error???
Please advise.
Hany Mounir

Hello,
Please consider any Windows Firewall, security hardware/software, policies on your organization’s mail
server.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not

Interesting db mail issue. If i click send test mail from sql mgmt studio, it works fine, but when i execute a SP to send a mail, it fails. One thing I noticed is that the "LastModified" column in the mail log shows the domain account when a test
mail was sent from mgmt studio, but show "sa" when the SP was used to send mail.
This is from SQL 2012, did not see this in sql 2008, looks like 2008 always used the service account. any ideas ?
Get this error:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not
Thanks.
Ranga

Hi Ranga,
I also use SQL Server 2012. I send a test email through SQL Server Management and the last modified By “sa”.
If you used stored procedure to send a test email. Please use the command below:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Adventure Works Administrator',
@recipients = '[email protected]',
@body = 'The stored procedure finished successfully.',
@subject = 'Automated Success Message' ;
I can both send test email through SQL Server Management Studio and SP. Make sure you have the right profile. Since you could send test mail via SQL Server Management Studio, please try again to send it via SP.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

EMail failure since iOS5.01 upgrade at iPad2

since upgrade to iOS 5.01 I have a serious email failure. If I select "email settings" the system skipped back to the home screen, not to the settings so it is not possible to change the email settings any more. I have the same effect if I try to type a new email address into a new email so it is only possible to send emails to people that I have in my adress book.

as I mentioned it's not possible to open mail settings anyhow and it was the very latest iOS version that is available so if that is 5.1 that I installed it

How can I import multiple email addresses in cc field of MAIL email into Address Book or Contacts?

Hello...Mail and Address Book used to have a great feature where when you received an email (in Mac MAIL program), if there were multiple emails I'm the "to" or "cc" fields, you could select them all as a batch and drag them into Address Book and it would add them all to Address Book. Now it doesn't seem to let you do it as a batch...you have to click each email address and select "add to address book".
Does anyone know of a workaround, or an AppleScript, or third party app that would allow users to add email addresses to AB in a batch from a MAIL email?
Thanks!

Try this.. Click the first in the CC field hold Shift, Click the Second Third, Fouth, Fifth and so on... click right Mouse select add to Contacts.

Move all Mail emails from one Mac to another

Move all Mail emails from one Mac to another (both Mountain Lion)
Is it correct to copy (/replace) the following to the target Mac?
~/Library/Mail/
~/Library/Containers/com.apple.mail
and everything beginning with
~/Library/Preferences/com.apple.mail.plist...
Many thanks!

coxorange wrote:
Csound1 wrote:
The Imap account does not need to be moved, sign in on the new machine, your mail will be there.
Does this mean even though these mails had been downloaded to the first Mac, they are still stored online too
Yes, Imap systems store all mail on the server, all connected clients are synchronized to the server (the mail itself stays on the server)
... regarding the POP accounts. Do you simply want the contents are or you planning on continued use of these accounts on the new machine?
Continued use.
Export each mailbox from the old machine to the desktop, to do so select a mailbox, rght click and choose Export, repeat for all others. Move the mailboxes to the new machine'sdesktop.
I suggest setting up the new accounts before importing the mail from the old machine.
In mail choose File>Import Mailboxes, choose the ones on the desktop (one at a time) a new mailbox will appear in Mail called Imported, you can move mail from there back to the correct mailbox in the POP accounts.

How can I change the format of text pasted into a Mail email from another document?

I paste some text from a word document into an email in Mail. In the word document, the text was indented .5" from the right margin. In the Mail email document, the text also appears indented .5" from the right margin.
But since this was the last text in the email I am composing, my text following the pasted-in part continues at the indented "style" of the pasted in text. And thre are no controls for changing this indentation on subsequent text in that email, nor can you chage the indentation formatting of the text pasted in.
Even when you select "decrease indentation" under the format/indentation options in the menu bar, Mail will not reduce a "pasted-in" paragraph indentation nor will it return a subsequent text paragraph you type in manually back to a left-adjusted margin.
Am I miising something?
Is there a way to see something in each Mail message composition window akin to what you see in a word processing document that allows you to set margins and indentations and tabs for individual paragraphs? Just like the Formatting controls you have here in the Apple Support communities when you ar composing a message and that I used to indent this paragraph?
And then used to return this paragraph back to the original left adjusted formatting?
Steve

Thanks for the reminder. I use the formatting toolbar but forgot to go there instead of the Format menubar item for Mail to try the indent and outdent commands.
But, alas, that indent, outdent option has no impact on text pasted into the message. It remains stuck at the indent level of the source text.
Might the answer lie in switching to plain text and formatting there? Tried that and no difference.
I did discover that if you highlight text pasted in with its "own" indentation preference "baked in" you can indent that text further and even "outdent" it back to where it was, but you cannot shake it's original indentation status to get it back to full left margins.
Steve

Mail email failure

Similar Messages

Maybe you are looking for