Mail error: folder "prvate" is full

Hello. i had some problems with my mac recently. Two times i got the message (transaltion) "mail could not save because the folder "private" is full". Does that mean that my ibook fails to find the HD? Strange thing.
Thanks.

Quit Mail first and using the Finder, go to Home > Library > Mail > Envelope Index.
Move the Envelope Index file to the Desktop.
Launch Mail and you will be prompted to import all mailboxes located within the Mail folder at Home > Library > Mail.
Select OK and allow the import process to complete.
This should resolve the problem and after confirming all mailboxes were successfully re-imported, you can delete the old Envelope Index file from the Desktop.

Similar Messages

  • How can I get my e-mails when I get a message that the folder inbox is full?

    I can't get my e-mail and the e-mails in my inbox have disappeared from Thunderbird, (but not from my server's web mail), so I can't divide it into several folders on Thunderbird to alleviate the problem. I don't know what happened to my old e-mails and I can't get new ones. I did go to my server's web site and deleted a huge number of e-mails there, but that didn't solve the problem. In fact, I wonder if this procedure caused my inbox to somehow disappear in Thunderbird.
    I get a message that says "The folder inbox is full and can't any more messages. To make room for more messages delete any old or unwanted mail and compact the folder."
    I have a new Mac with Maverick. However, in case this matters, all of my old files were migrated to the new Mac, including e-mails. Most of the old e-mails are in a separate folder, however. How can I restore my inbox and also get new e-mails?
    Thank you very much.
    I just thought of something else. I just changed my password with the server. Could this be the problem? I am able to *send* e-mail with Thunderbird, however.
    rteach1

    Technically the limit of 4Gb per folder should have been removed in a recent patch. Personally I an unconvinced as the developers have said so twice before and something else arose to bite people at 4Gb. So the limit probably does not exist anymore and moving mail and compacting will fix it without data loss if it occurs as recent issues have been about displaying mail after the 4Gb point, not storing it.
    Use the Ctrl and Shift keys in conjunction with your mouse to make multiple selections.
    click followed by Shift+ Click selects everything between the two clicks, including the items clicked.
    Holding the Ctrl key while clicking allows you to select or deselect mail to either fine turn the list from shift clicking or to make one of your own.
    Ctrl +A selects everything in the list from the current selection to the end.
    One option is create an important folder and move your important stuff to it then ctrl +A the whole remaining inbox.

  • Email account folder in /user/library/mail is much larger than full mailbox archive for the same account

    Hi,
    I recently changed jobs and want to archive all email (with attachments in place) for the associated work email account.  I also plan to remove the old work email account (IMAP) from the list of active mailboxes in Apple Mail.  I don't want Spotlight searches for personal or current work email cluttered with results from my old job.
    I have created an archive of the old work account by doing Mailbox Archive for all of the IMAP folders for that account.  The entire archive is 1.7GB in size.
    Before I delete the old account from my Mail preferences, I want to make sure that I have really exported everything.  So I've compared the size of the new archive folder with that of the mailbox folder in users/.../Library/Mail for that same account.  That latter is 8.7GB in size.  Why the enormous difference?
    Can the difference be attributed to lack of compression and indices (which would be rebuilt if I import the archive) for spotlight searches?  Am I missing something in the archive that I created?
    I've created a zip of the system folder.  Can I easily restore this at a latter time if I delete the email account from my Mail preferences?
    Is there a better way to achieve my objective?
    Mitoids

    I did find a "Recovered Messages" by looking in the the Mail client under "On My Mac" (I don't normally use that feature).  One message with an accicental 99MB attachment that I never sent, was recovered ~60times, consuming 5.7GB. 
    I deleted all of those, but the size ~/Library/Mail/xxxaccount folder did not change much.  It is still much larger than the Archive I created.  BTW, this is an IMAP account that was syncing with corporate GMail.

  • Changing "Mail Downloads" folder for attachments

    It seems in Leopard Mail, when you double click an attachment to open it, it is temporarily saved to ~/Library/Mail Downloads. This is in contrast to (I think) Tiger, where it would be saved to the Downloads folder set in the General preferences. There is still a setting for the Downloads folder in the General preferences, and according to the help window, it is to "Specify the folder in which to temporarily save attachments you open from a message". To me, that means the same as the Tiger behavior. However, if I change this preference to, say, "Desktop", it seems opening an attachment (not explicitly saving it) still saves it to the ~/Library/Mail Downloads folder, not the assigned folder. Is this the correct behavior? If so, the help window is misleading. Personally, I would like the option to change this folder, although I suppose there are workarounds such as changing the Mail Downloads folder to an alias of the desired destination folder.
    thanks.

    Ok, so much for that clever workaround. Doesn't work, Mail just throws up an error and refuses to save the attachment. Any other ideas? I just want Mail to auto-save opened attachments onto the Desktop, in case I forget to explicitly save it, and so I don't have to root into subfolders to find it.

  • HT6154 Updated os now mac mail errors on macbook pro, mac, and iphone

    I recently updated my os on my macbook pro (os 10.9.2) and my iphone (7.1.1), now I am unable to consistently access my email accounts on any of my devices.  My gmail works sporadically, my exchange worked at first, and stopped working on my iphone and my mac.  I have tried deleting & adding accounts that solved the problem for a little while when it first happened, but it has conitnued.  I get pop up errors on iphone including "The connection to the server failed." When I try to add my exchange account, the error reads, "unable to verify account information."  It allows me to save my account info, but then continues to ask for my password and never connects.  On my macbook pro, the accounts will go off-line and I have to regularly use the connection doctor.  I can access all of my accounts through my email service providers.  Any suggestions? 

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Yahoo Mail - Unable to delete and Cannot Get Mail errors

    A few days ago my Yahoo mail started acting up.
    I keep on getting "Unable to move message" errors when trying to delete mail. The proper folder is selected as the trash folder under settings. Sometimes message do delete however, but mostly they do not.
    I am also getting periodic Cannot Get Mail errors, but mostly I am able to receive mail.
    This leads me to believe that this might be a yahoo issue (I opened a support request with them also) I have deleted the account from my iPhone and recreated it several times, but the problem persist.
    Anybody else having similar issues with Yahoo mail ?
    Thanks
    PS I have Yahoo Mail Plus with POP access

    I opened a ticket with Yahoo, a day later they came back and advised that they made some changes to my account, but it still does not work.
    There is something strange about how Apple and Yahoo communicates, I think there is some exchange in the middle that is causing the problems. The reason for me saying this is the error I got periodically stating that "Cannot Get Mail, The user name or password for imap.apple.mail.yahoo.com is incorrect". Why imap.APPLE.mail.yahoo.com ???
    I did however setup a "Other" mail type account using the POP and SMTP settings from Yahoo and it works like a charm now, no more problems and I can now even use a different reply to e-mail address. Only issue might be that you no longer have the Yahoo side custom mail folders on the iPhone, but this is no big deal for me.
    For the incoming server I used pop.mail.yahoo.com with my Yahoo username and password (username without @yahoo.com)
    For outgoing, SMTP, Hostname I used smtp.mail.yahoo.com with my Yahoo username and password (username without @yahoo.com), SSL = ON, authentication = Password and server port 465
    Under advanced settings for outgoing mail server, Use SSL = ON , authentication = Password and server port 995.
    I am not claiming that I understand all of the above, but it works. Hopefully this may point you in the right direction.

  • How do I stop the "The folder Junk is full" message?

    I keep getting the "The folder Junk is full delete some mail to make space" on every downloaded message that is marked as Junk.

    I did delete a lot of mail. I never had this problem before and there was a lot more mail in junk before. I did not try compacting yet. I will try later today.
    -Mike

  • Javax.mail.FolderNotFoundException: folder INBOX not found

    Hi
    I have a simple program called simpleread.java. I have javamail, JAF and javamaildir installed.
    Now I know that I am not providing more details and I can post more details. I am very apologetic about this. However I wanted to know if the error I have is kind of general.
    So I am posting the following error:
    Exception in thread "main" javax.mail.FolderNotFoundException. folder 'INBOX" not found
    =======
    thanks in advance
    I will provide details gladly

    Sounds like a problem with the way javamaildir is configured,
    or the way you're using it. You might want to talk to the
    javamaildir experts.

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Attachments in Mail Downloads folder

    I found a folder Home>Library>Mail Downloads which was loaded with about every attachment I have ever received using Mail. I was trying to figure out why. In Mail prefs, there is an option to select a folder, I have chosen Home>Downloads pretty much which is also default for my browser. The action is set to remove unedited copies when message is deleted. I'm confused because it looks like the Destination and Action are independent. When I have an attachment, if I click "Save" it populates the selected path to the "Downloads" folder. If I open that attachment, it seems to populate the Home>Library>Mail folder.
    What controls the opened attachments form populating this, somewhat, obscure folder?

    Hi,
    Attachments to messages are actually stored in the mailbox along with the message text. It is when an attachment must be opened with another application, such as a Word document with Word, that the attachment is also placed in the Mail Downloads folder. There it can be used and edited by the application used to open it, and from there can be returned as edited to the sender or to others.
    There is no reason files must permanently stay, but if you edit or otherwise alter files that have been attached, then you must elect some place to keep them for your own use.
    You will note that in the Mail Preferences/General there is also a selection regarding when to remove files from Downloads folder if not edited. Any file that is not edited need not remain in the Downloads folder since it already exists in the mailbox with the message it came attached to.
    Image files, since they can be opened directly in the Mail window, by Mail, do not go into the Downloads folder, but if any were opened from the message, with say, Photoshop, then that image file would also be sent to the Downloads, temporarily.
    Ernie

  • Quick Look copies attachments to Mail Downloads folder!

    Holy maloly, I just discovered why my MacBook Pro was slowly losing disk space! Every time I use Quick Look to check an attachment in Mail, a copy of the attachment is placed in the Mail Downloads folder of my user Library. My writing work entails quickly looking at lots of very large attachments and e-mailing estimates to clients. Quick Look has been a great time saver for this. Nice being able to stay in Mail and not have to open Word to examine the job. But I don't need all these additional copies taking up space on my hard drive. As far as I know, Mail is the only program that does this.
    Is there any way of telling Quick Look to NOT make copies of Mail attachments?
    Thanks!

    Hi,
    Attachments to messages are actually stored in the mailbox along with the message text. It is when an attachment must be opened with another application, such as a Word document with Word, that the attachment is also placed in the Mail Downloads folder. There it can be used and edited by the application used to open it, and from there can be returned as edited to the sender or to others.
    There is no reason files must permanently stay, but if you edit or otherwise alter files that have been attached, then you must elect some place to keep them for your own use.
    You will note that in the Mail Preferences/General there is also a selection regarding when to remove files from Downloads folder if not edited. Any file that is not edited need not remain in the Downloads folder since it already exists in the mailbox with the message it came attached to.
    Image files, since they can be opened directly in the Mail window, by Mail, do not go into the Downloads folder, but if any were opened from the message, with say, Photoshop, then that image file would also be sent to the Downloads, temporarily.
    Ernie

  • How to (successfully) change Mail Downloads folder?

    Hi,
    I've been trying to wrestle with my Mail Downloads folder location without success, so I thought I would ask.
    I dislike having a separate "Mail Downloads" folder because stuff accumulates endlessly there. The default Mail Downloads is at ~/Library/Containers/com.apple.mail/Data/Library/Mail Downloads. Here's what I have tried:
    The obvious: change "Downloads folder" in Mail prefs. No matter what I choose, the files are still downloaded to the default folder.
    I removed ~/Library/Containers/com.apple.mail/Data/Library/Mail Downloads and made it a symlink to my ~/Downloads folder (where I'd like to put everything). This causes opening attachments from Mail to hang (I have to save them first, and then open from the saved location). I get these messages in Console (in this example, trying to open an attachment named "Manual.pdf", and PID 56818 is the Mail app):
    9/13/12 11:52:29.707 AM CoreServicesUIAgent[56818]: Quarantine resolution refused to pid 56809 because it is not allowed to read /Users/a10022/Library/Containers/com.apple.mail/Data/Library/Mail Downloads/Manual.pdf
    9/13/12 11:52:29.000 AM kernel[0]: Sandbox: sandboxd(56817) deny mach-lookup com.apple.coresymbolicationd
    9/13/12 11:52:30.221 AM sandboxd[56817]: ([56809]) Mail(56809) deny file-issue-extension /Users/a10022/Downloads/Manual.pdf
    9/13/12 11:52:30.238 AM sandboxd[56817]: ([56809]) Mail(56809) deny file-issue-extension /Users/a10022/Downloads/Manual.pdf
    9/13/12 11:52:30.253 AM sandboxd[56817]: ([56809]) Mail(56809) deny file-issue-extension /Users/a10022/Downloads/Manual.pdf
    Any thoughts? The symlink trick was working fine in Lion and before, the trouble started with the upgrade to Mountain Lion.
    Thanks,
    --Diego

    Hi,
    I have spent quit some time on this and there is no decent option to do so. Mail is a buggy product since it ignores the default preferences. Old tricks with the symbolic link don't work. Most likely because Apple wants you to look at all the nice inline attachments in stead of treating them as a real attachment. Just like they do in their commercials.
    I found some posts on how to move it to another disk but that was not my goal. So in the end, there was only one option left for me and that is to just make it a faourite folder in my finder so I can at least review it daily to clean it up.
    Sorry for not having a desent fix but this works for me.
    Good luck!

  • Mail Downloads Folder

    Hiya
    I was wondering what the mail downloads folder actually does. I know there is a clue in the title but what I mean to say is this.
    1 - Does the mail downloads folder contain all attachments to emails OR
    2 - Does the mail downloads folder contain files opened directly from Mail?
    I want to know if I delete all the 112mb of files in this folder will I delete the attachments in the emails themselves? Will the attachments still be there for saving elsewhere?
    If someone can enlighten me it would be great. Thanks
    Mike

    You are very right, the help file contained the advice below. I think I will make the suggested changes and get the program to delete the items in the folder on exit. Thanks for the tip it was very useful.
    Setting the location for attachments that you open in Mail
    Files attached to (or enclosed in) an email message are stored as part of the message. Since attachments are part of the message itself, they are usually deleted when you delete the message. You can save separate copies of attachments by clicking the Save button in the message window.
    Mail also temporarily saves an attachment as a separate file on your computer when you open the attachment by clicking it in the message. The file is saved in the Mail downloads folder, located by default in the Library folder of your home folder.
    iMac (Intel) Mac OS X (10.4.9)

  • Exchange Server Information Store has encountered an error while executing a full-text index query

    Hi Team need help
    Exchange 2013 EAC doesnt show the databases and it gives message
    "Your request couldn't be completed. Please try again in a few minutes."
    Its a 9 Node DAG and I stopped and diabled Search and Search Host controller on all of them
    in the event viewer see a lot of Event id 1012
    Log Name:      Application
    Source:        MSExchangeIS
    Date:          4/1/2013 9:23:48 AM
    Event ID:      1012
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ex1301.dagdc.com
    Description:
    Exchange Server Information Store has encountered an error while executing a full-text index query ("and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*",
    mode="and"), itemclass:string("IPM.VOICENOTES*", mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))"). Error
    information: System.TimeoutException: Failed to open a channel.
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
       at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
    PagedQueryResults pagedQueryResults)
       at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
    SearchExecutionDiagnostics diagnostics)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeIS" />
        <EventID Qualifiers="49156">1012</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-04-01T16:23:48.000000000Z" />
        <EventRecordID>192599</EventRecordID>
        <Channel>Application</Channel>
        <Computer>ex1301.dagdc.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*", mode="and"), itemclass:string("IPM.VOICENOTES*",
    mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))</Data>
        <Data>System.TimeoutException: Failed to open a channel.
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel&amp; serviceProxy, Action`1 call, Int32 retryCount)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.&lt;ExecuteInternal&gt;d__18.MoveNext()
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.&lt;ExecuteSimple&gt;d__a.MoveNext()
       at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
    PagedQueryResults pagedQueryResults)
       at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
    SearchExecutionDiagnostics diagnostics)</Data>
        <Binary>5B444941475F4354585D000084000000FF09000000000000000268000000808A00100000000080CA00100000000080B200100000000080D200100000000030FF001000000000309F00100000000030DF001000000000B09D001000000000B0DD001000000000B0ED001000000000B08D001000000000B095001000000000B0A5001000000000</Binary>
      </EventData>
    </Event>

    Hi,
    Please reenable and start the search engine service and try again.
    The simillar case for your reference:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/4f43ef50-b71f-4ab3-8ced-70f1c36c5509
    Hope it is hlepful.
    Fiona Liao
    TechNet Community Support

  • File To Mail  - Error in sender CC

    Hi All,
    I am trying out a File to mail scenario following the Blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    I am getting the following error in the File Sender Comm Channel :
    Mail: error occurred: com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint  [null "null"]; nested exception caused by: java.io.IOException: no sender address specified
    I could also see the payload is empty in the Receiver Mail CC
    Now can anybody help getting me the mail ...
    Thanks in advance

    Hi Bhavesh,
    I get a checkered flag in Moni ,
      But the response has only SOAP header and Body with out payload  , I Mail package is checked and base64 is selected ..
        <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
      <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="T">Party normalization: receiver</Trace>
      <Trace level="1" type="T">Receiver scheme external =</Trace>
      <Trace level="1" type="T">Receiver agency external =</Trace>
      <Trace level="1" type="T">Receiver party external =</Trace>
      <Trace level="1" type="T">Receiver party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 1DC20B0043D611DBC937000D60D4EDB5</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Queue name : XBTI0009</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTO3___0001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
    - <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
      <Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Mail/30 GK_File2Mail_IM</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      </Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Async processing completed OK.</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:05Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>

Maybe you are looking for

  • How to hide the url of Iframe

    Dear Experts, In my webdynpro application I am using a Iframe UI element, to show a document from KM, When the user Right Clicks on the Iframe he can view the URL, I have to hide this URL. Request you to please give your helpful suggestions. Warm Reg

  • Access connection​s 5.50 and EAP TLS with Computer certificat​e

    Hello, I'm trying to connect to a Wifi using Computer certificate to authenticate and it works perfectly fine with windows Wireless Zero Config however with Thinkvantage Access Connection I always get an authentication error. I'm using a R61 with a T

  • Old apps won't work with Leopard

    OK, thinking this would work out alright, I bought and installed Leopard on my eMac. I knew that my machine just met the requirements to run it, but I figured I could live with a sluggish machine for a while. I upgraded the OS from 10.2.9 which ran e

  • HELP!! File won't open

    Hi, I have been using Numbers for a couple of weeks now. I have a database I created with critical data. It was opening and working fine. Today it will not open. I get a message...."could not be read, the database does not have a valid format" Does a

  • Booting and Installing WIN 7 64 Bit Home Premium PL on HP Probook 4520s

    Hi, I have very seriouse matter in my HP as above mentiobned. My DVD lecture is probably broken and unable to boot from disc DVD Install Win 7. At my flat i have got Ethernet LAN with PC Desktop with DVD Lectrure included. Is there any option in my H