Mail error, sync help

I use an iMac, MBP, and iPhone, all synced via MobileMe.
When I click the iMac/MBP Mail option to see associated email replies to a particular email (the little curvy arrow icon button at the far left of each email that appears by any email to which you reply or forward), I get the following ERROR message:
"Mail was unable to find your response to the message “...”. You may have deleted the message."
The function works correctly when I am on the computer from which the email was replied/forwarded to. How can I sync this function so that it works correctly from my iMac/MBP regardless of the computer that I sent/forwarded the email from?
Note: all sent/forwarded emails are synced in all sent folders regardless from which device I used to send them, it's just that for some reason this little function is not working.
Hope this all makes sense. I love that function and want to get it working but cannot find the right search to dig up any info...

Hi Allen,
I assume you're using FileVault?
http://support.apple.com/kb/TS1974
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2338.html
If not then post back.

Similar Messages

Cannot Send Mail - Error, Need help!

I can not send e-mail. Error message reads,
"The recipient "[email protected]"was rejected by the server."
Initialy I was getting an error message about "Authentication" but when I took User Name and Password for SMTP, that error disappered, but now I'm getting the above message.
Did anyone figure out the trick to get around this and send e-mails out?
eMachine Windows XP
eMachine Windows XP

AlexMaeda,
This article has more information:
http://docs.info.apple.com/article.html?artnum=305634
As for an email provider allowing customers to relay outside of their network, many email providers, set up an authenticating SMTP server on different port. The article above includes information on specifying the port to use.
For example, .Mac accounts can use port 587 as discussed in this article:
http://docs.info.apple.com/article.html?artnum=75124
You may want to check with your email provider if they offer an authenticating smtp server for people who are traveling or using mobile devices. Many do so without any additional cost, some may charge for access to that service.
Hope this helps,
Nathan C.

SMTP of POP3 Mail error ! help me !

i want to use a POP3 mail account to auto send my test report to some mailbox. And i try to use the labview7.0 example vi named "E-Mail Notification.vi". But it seems no work. Because my pop3 mail account need username and password. But the example doesnot request me to input the username and password . How to do it realize my aim? Hope for help !

Hi Apple James,
Quote from the KB link:
By default, LabVIEW sends plain text. For a server to use HTML to read an e-mail, the header must specify that this particular email is formatted using HTML. The header is created by a SubVI two levels down into the email VI. To send formatted email one must find the VI that writes the header and change the input to this VI from "text/plain" to "text/html".
Please see: http://digital.ni.com/public.nsf/websearch/E9544A158AFE8D1C8625705400751DE1?OpenDocument
Thanks
Kurt
Applications Engineer
NIUK & Ireland
Message Edited by Kurt NI AE on 11-08-2006 03:31 AM

Cannot get mail error: please help! :/

Everytime I click on my mail app on my iphone 4, I get the "cannot get mail, connection to the server failed". I have deleted the account before and it fixes it temporarily only to happen again in the future. What is going on?

Start with these two support articles. Try everything in both. If you still have no success, post back and try to be very specific about steps that you worked through, what happened, etc.
Unable to send or receive mail
http://support.apple.com/kb/TS3899
Setting up and troubleshooting mail.
http://www.apple.com/support/ipad/assistant/mail/

TS2529 Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Help with "Error syncing Audio and Midi" message. How to fix?

Hi,
I'm running Logic Pro 7.1 on a G5 Dual 2.5 PowerMac. My audio interface is a Digidisign Digi002R, and my MIDI interface is a MOTU Fastlane. Up until a few days ago everything was working fine. I didn't install any new software or anything.
All of a sudden in any Logic session I open (new or saved) I get all kinds of artifacts that sound like they're associated with sample rate problems.
True to form, on playback after 4 or 5 seconds a message comes up telling me that there is an error syncing audio and midi. It tells me that a sample rate of 88209, or 88213, or 88207 (each time it's different) was detected, and that there is a conflict between Logic and my external device.
My Digi002R is set to 44.1, and Logic is set to 44.1 as well. I have no idea where this problem came from.
The only thing I do know is that I've been using the Peachtree Press Apple Pro Training Series to study for my Level 1 Logic certification. it comes with a CD with Logic sessions to use with the text. The CD comes with a Logic Epress Demo but I didn't download that as I've already got Logic Pro. I dragged those session files to my desktop, and the problem occured for the first time when iopened up that first session from the CD. After that, every single session has this problem and I have no idea how to fix it.
Sorry for the incredibly long message, but can anybody help?
Thanks
PowerBook G4 15", PowerMac G5 Dual 2.5 Mac OS X (10.4.7)

Hey,
Thanks. I appreciate the help, but I've tried all of that. I just don't get it. I've unplugged everything, I've shut down, powered down, relaunched everything a dozen times and the problem doesn't go away. I know that the problem is with Logic because the interface works perfectly fnie with everything else, from Pro Tools to iTunes.
I'm having Logic Pro 7.2 shipped to me so I'm hoping that installing that will reset everything, but until then I can't do anything in Logic.
Anybody ever encounter anything like this?

Sudden error syncing mail

After months working fine, iTunes has began giving that error when syncing my iPhone 2G:
Image: !http://homepage.mac.com/xsimon/diversos/SyncError.jpg!
Both Mac and iPhone have the latest software version, and no changes has been made in their configurations.
I have tried deleting mail accounts in both iPhone and Mac and I still get the same error. What can I do?
Message was edited by: Trinity

Did you make any changes to the mail accounts on your computer? This error is stating that the information initially synced to the iPhone from the computer has changed and it cannot find the right path to make the changes.
This sync should only occur once, when you first set up the iPhone. Then turn it off.
Try this:
If the information that is on the computer is most up to date, then select the option in the Info Tab to overwrite the iPhone with the mail settings on the computer. After the sync, disable mail account syncing since it is not necessary to sync this information after it's been set.
See this discussion article: http://discussions.apple.com/thread.jspa?threadID=1230912

Just got 4s and synced my music and only about half went to my phone. the rest wont sync. says unknown error. help!

just got 4s and synced my music and only about half went to my phone. the rest wont sync. says unknown error. help!

Unless as part of a backup, or stored somewhere else, they are gone.
Your son needs his own Apple ID for iCloud, FaceTime & iMessage. He can continue to use yours for iTunes content, but for everything else, he needs his own.
When you did what you did, as far as iCloud knows, this is the same person with multiple devices, and that's they way things are supposed to work: keep everything in sync.

Another newbie WIN Mail Errors

Sorry if this is not the correct board - it is my first visit.
For weeks now, I've been pulling out my hair rotating from Verizon to HP to msn to windows tech support over this:
In any website, clicking their 'Contact Us' button or forwarding anything form there, I always got a windows mail popup "Error 0x800CCCf0; Windows could not send . After many calls and re-settings, an HP tech told me today to just use Windows Live instead. This brings up a new error:
"Unable to send or receive messages for the Msn (z7udumm) (1) account. There was an unexpected error and Windows Live Mail can't sync the messages in your Hotmail account. To sync your messages, in Windows Live Mail, remove your Hotmail account and then add it again. To view messages in your Hotmail account, go to http://hotmail.live.com on the Web.
Server Error: 4102
Server Response: Object with Id caaa4357-f436-49ec-91df-cdaedff6117f appears in more than one command
Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx'
Windows Live Mail Error ID: 0x8DE00001"
From where do I remove/ readd the Hotmail account? What does all of this gobbledigook mean? Can anyone help? Thank you very much

Well, it's pretty much designed and meant to be a single-user machine, at least so far. There is only one Contacts app which, of course, feeds and drives everything else.
You can easily import your whole Address Book into hers and then sync that one to the iPad. That might result in some duplication but that's not too serious a problem, I hope. Arrangement details, Groups and etc., will have to be negotiated also.
And as you suspected no, it's not tethering. Think of them as being linked, via iTunes, for syncing purposes.

Apple Mail Not Syncing

I am having issues with my apple mail not syncing on my computer. This just started happening, was working fine up to this point. We use MDaemon, and nothing appears to be wrong on the server. I can see all the mail on my iPhone and through World Client. This is the error I'm getting. I have backups of my computer, what components should I try to reinstall from "resources".
System consistently reports(s) : SyncServer[985]: [0x7fada840bdb0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.

I have reinstalled Mountain Lion, and this still did not help. Mail still not syncing. When I look in the "System/Library/Framewoks/Message.frame/Resources" I do not see anything that is called MailSync. I have looked through my Time Machine backups and see it way back in Jan. 2013. I did copy it into the "Resoures" folder, still not working. I have deleted my account and reset up, still not working. My issue started late March 2013. I don't know what else to try.

Windows - No Disk Error - Please help!

Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!

I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

E-mail (Outlook) syncs to iMac and iPad, but not to iPhone. How can I get it to sync to all three devices?

My e-mail (Outlook) syncs to my iMac and my iPad. However, I can read e-mails on my new iPhone, respond to them, and even erase them, but when I go to my computer or iPad afterwards, they still appear unopened and I have to open each one and close it again so it doesn't show up as an unread e-mail. This does not happen with the iMac and iPad; deleting it on one of those deletes it on the other as well. What am I doing wrong?

I asked the hosts to relocate your question to the Using iPhone Forum. You should get helped there.

File To Mail - Error in sender CC

Hi All,
I am trying out a File to mail scenario following the Blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
I am getting the following error in the File Sender Comm Channel :
Mail: error occurred: com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: no sender address specified
I could also see the payload is empty in the Receiver Mail CC
Now can anybody help getting me the mail ...
Thanks in advance

Hi Bhavesh,
I get a checkered flag in Moni ,
But the response has only SOAP header and Body with out payload , I Mail package is checked and base64 is selected ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 1DC20B0043D611DBC937000D60D4EDB5</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO3___0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Mail/30 GK_File2Mail_IM</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:05Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>

I can't get my yahoo mail to sync to my iPhone 5. It keeps asking for password over and over and then says yahoo server unavailable. How can I fix this?

I am unable to get my Yahoo mail to sync on my iphone 5. It keeps asking me for my yahoo password over and over and when I do it then says yahoo server is unavailable.

Me too it has been all week and driving me crazy--- I've done everything I've seen on these websites to no avail--- does apple monitor these posts and offer any help????????

Mail error, sync help

Similar Messages

Maybe you are looking for