Mail failing to load after 10.8.1 update

My mail client refuses to open after updating last night. The system error is
*** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Could not create ~/Library/Containers/com.apple.mail/Data/Library/_ˇˇˇ/f«/
Any one else having problems?

If the printer is connected to the Mac via USB cable and you do not see it in the Default Add Printer view when you try to add it, then it could be the USB cable at fault. So if you have another USB printer cable then try this.
If the Mac still fails to see the HP then open System Information (Applications > Utilties) and in the left column, select the USB entry. The top right pane will show all the USB connections in your Mac. The HP should be visible in this list.
If the printer is not connecting to the Mac via USB but via wireless, then I believe for HP you do have to rely on the HP Software to add a network printer. So maybe check their web site for a later version of this network utility, as the one that came with the printer is probably not compatible with 10.8.

Similar Messages

HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
Error report as follows
Process:         Pages [208]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.1 (923)
Build Info:      Pages-9230000~1
Code Type:       X86 (Native)
Parent Process: launchd [93]
Date/Time:       2012-08-22 12:33:15.909 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          102101 sec
Crashes Since Last Report:           11
Per-App Interval Since Last Report: 2217715 sec
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
Process:         Pages [13521]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.3 (1048)
Build Info:      Pages-10480000~1
Code Type:       X86 (Native)
Parent Process: launchd [153]
User ID:         501
Date/Time:       2013-03-11 14:57:02.175 -0400
OS Version:      Mac OS X 10.8.2 (12C3103)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
    0x1000 -   0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 -   0x46bff7 com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x8fe3e000 - 0x8fe70e57 dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

Live bookmark feed failed to load is greyed and no updates fo latest headlines

'live bookmark feed failed to load 'is greyed and no updates for Latest Headlines.
Most Visited,Getting Started ,Cusromised links and all others OK.

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
Try to remove the current Latest Headlines feed and create a new feed.<br />
You can visit http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml

Microsoft Office Apps fail to work after 10.6.7 update

Has anyone else's office apps failed to open after installing the OS update?
This is a brand new iMac only 5 days old using office 2011 with current updates.
Regards.
Mike.

After doing some Internet research and speaking with a second-level Apple tech, together we came up with the following solution.
Shut down, then start in safe-mode (hold shift key while re-starting). This will clear the font cache and re-build it. After doing this, when I started Word 2004 it took some time, but it showed the following fonts as corrupt: APC Courier, Bastion, Chicago TU, Courier TU, Latinski - and indicated they should be removed. Word then started up even though I just clicked OK to those messages and didn't remove them. I then re-started Word and it came up normally even though those fonts are still in the font book. By the way, I have downloaded the freeware app "Fontnuke-1.17," but haven't used it yet. There is a shareware app, "Fontfinagler," which may also be useful if safe mode doesn't work for you.
Branton
California
iMac 27 i7 with 250 GB SSD and 2 TB HD, 8 Gb RAM, 10.6.7, running Office 2004 for Mac

Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoit

help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

Internet appears connected but pages fail to load after 3-5 minutes! HELP!

I purchased my Macbook three weeks ago and it immediately found my network and connected. A few days later my computer failed to load internet pages (both in firefox and safari). The connection would not disconnect, or seem to slow. I diagnosed and found no problems. To get it to work for small amounts of time I turn off airport and then turn it back on and get a few minutes before I get "Problem Loading Page".
I have updated the firmware in my router. I use a D-Link Router WBR-1310 and a D-Link Cable Modem DCM-202. I have called my cable provider, Comcast, and they tested the connection saying it was strong. I connected directly to the modem and it never failed to stop loading pages the full 20 minutes I was connected.
My computer has no problem connecting to other connections: The Library, neighbors, my parents' home. There are no time outs and it automatically connects through Airport, no problem.
I have called D-Link about the router. They're a bit confusing in troubleshooting the problem. They told me to connect my Ethernet cable to the computer and manually put in IP address, subnet mask, router address, and name server address. First, I don't know where to find any of that except for the IP address. Secondly, do they expect me to connect and leave the ethernet cable in my computer?
Have there been any problems with Macs and this router? What am I doing wrong and has D-Link given me good steps to take? My experience with them hasn't been so great so I'm skeptical. All of this is very upsetting, I can't enjoy my new Macbook at home.

FrankInColorado wrote:
Yes I had read about this. The point is, especially with something such as wireless, it has to inter-operate with everyone else out there. You would think Apple would do some testing before going to some "recommended" standard that obviously is not widely used in the real world. To someone who just bought a new MacBook, it doesn't matter that Apple is using the "new" recommended way. They just want to be able to connect everywhere they go.
No, networking is a world of standards and recommended procedures. This all used to be a lot easier when there were actual engineers who understood the RFCs running most networks.
You seem to think Apple just throws software over the wall. If that's true, you should swing by Cupertino some time and see if you can meet with a member of their software test groups; I'm sure they'd love to know that you think they don't do anything.
Or perhaps Apple is supposed to test their software with every ISP on the planet first.
And how many people posting in these forums have said when they turn Airport off and back on, then things work again for a while. If the issues are on the other side, why would that make any difference?
Did I or anyone else here say that changing to OpenDNS' servers would solve every issue with every person in each and every one of these threads?
But there have been many cases where switching to OpenDNS' servers does solve people's network delay issues. Hmmm, I guess Apple's cluelessness doesn't apply in those cases.
Come on. He connected directly to the modem and was loading Web pages for 20 minutes without any problem. He goes back to using Airport and the problem reappears. And you think it's reasonable to assume it was just a coincidence that the supposed DNS issue went away while he was connected to the modem and reappeared when he went back to Airport?
It depends now, doesn't it, as I just said.
Perhaps he tried "surfing to a few sites" while connected directly, and when that worked he went back to AirPort. Did he try going to the same sites? Different ones? We don't know.
In fact, even if he did visit the same sites, that wouldn't tell us anything either way as the DNS resolutions for those sites would have been cached when he was connected to the wired network.
This is the same thing that has happened to me since upgrading to Leopard. My wireless started going bad after some minutes of accessing Web sites. If I rebooted the machine, it would be fine again for a while. I finally just turned Airport off and plugged in an Ethernet cable. I have not had any trouble with accessing Web sites since - same ISP (Comcast), same DNS servers.
Tell me there is no Airport issue.
I never said there weren't issues. No one did. Except you implied I did.
Your approach to troubleshooting seems to be "Ah, Apple's software is broken, why bother."
1) There are many people whose problems have been solved by switching to OpenDNS' servers. That's fact.
2) There are many ISPs who have broken DNS servers. That's also fact.
3) Comcast has a variety of DNS servers spread across the country, so your results in Colorado may differ from those of a Comcast subscriber in a different state. Fact again.
4) You asked for reasons, I gave them, you don't like them. Obviously I must be an Apple shill. Funny, I'll have to ask why I haven't received a paycheck from Cupertino. Ever.
I understand your frustrations if AirPort isn't working for you, but don't turn around and drop into troubleshooting threads and tell people why suggestions we're making can't possibly address their issues just because they haven't solved your particular issue.
That would be just as silly as me assuming that because I haven't seen an AirPort drop since 2007, all of those posting in threads here are simply delusional or incompetent.
The only way to find out what's wrong in each case is to be methodical, and step one in diagnosing network delays is to see if DNS is at fault.
If it is, great, problem solved. If not, on to step two of a nearly infinite sequence.
One step at a time.

Plugins Failed to Load after AE Update

After updating to 11.0.2.12 I receive this error when starting After Effects.
XDCAMH.prm
ImporterFastMPEG.prm
ImporterMPEG.prm
All three failed to load.

I'm not saying it causes "more" issues than it provides fixes, it's just causing other issues. Of course this is a typical case of "YMMV", but I've seen too many issues popping up over the last few days to really give this a clean bill, and that's not even counting the notorious unreliability of Application Manager/ Update Manager. Well, whatever, anybody is free to try, just don't say you haven't been warned....
Mylenium

Mail fails to open after OS X upgrade

Having recently upgrade to OS X, when I click on the Mail App, it open saying something about "upgrading existing emails...", the box then closes and nothing happens. It does this every time I try to open Mail. I've deleted my gmail account profile through System and rebooted, but no joy. Any other advice out there? Please.

Lion ate ALL my Mail: Apple Support Communities
Mail upgrade failed: osx lion: Apple Support Communities
Mail.app not starting after Lion upgrade: Apple Support Communities
mail upgrade 10.6 to 10.7: Apple Support Communities

Enterprise Manager failes to load after installing Oracle IDM on LINUX86x64

Hi Folks
We are into a serious problem:
We have completed these tasks till now on RHE Linux 86 x 64 bit
Install Oracle Database 11g - working fine and running
Install WebLogic Server Version: 10.3.5.0 - working fine - Console opens fine
Install IDM - Installed successfully with errorr -Only EM console was not configured , rest installed peacefully
Now the problem is, we want to access Oracle EM but it fails to load with this error:
Got TargetException for : target = Farm_base_domain , type = oracle_ias_farm
Collapse Hide Additional Trace Information     Hide Additional Trace Information
oracle.sysman.emSDK.app.exception.EMSystemException at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler._getFarmInstance(EMASConnectionHandler.java:1266) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getFarmID(EMASConnectionHandler.java:288) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getTargetInfo(EMASConnectionHandler.java:450) at oracle.sysman.emSDK.adfext.ctlr.AuthUtil.doTargetAuthProcessing(AuthUtil.java:186) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPostInitContext(EMPagePhaseListener.java:436) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.afterPhase(EMPagePhaseListener.java:234) at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:532) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:203) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$200(ADFPhaseListener.java:23) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:232) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:276) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:77) at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:54) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:399) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:102) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:183) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
But when i go to WL Console > Deployments > em - it says active and OK
Can someone please help how to make EM run?
Any idea guys what could be the problem here?
Please help!
Regards
Dev

Ok, I saw that there were two parallel schemas running, now when i deleted one of them, i can see only one soa-infra, but its down :(
How can we make it run?
Here is the error:
Invoking Start Up operation for application soa-infra on target soa_server1.
[Deployer:149193]Operation 'start' on application 'soa-infra' has failed on 'soa_server1'
[Deployer:149034]An exception occurred for task [Deployer:149026]start application soa-infra on soa_server1.: .
Operation Start Up on target soa-infra Failed. Please see error logs for details.
Aug 6, 2011 8:38:58 AM BST
     Error     BEA-149202     Encountered an exception while attempting to commit the 7 task for the application 'soa-infra'.
Aug 6, 2011 8:38:58 AM BST
     Error     BEA-149265     Failure occurred in the execution of deployment request with ID '1312616332249' for task '6'. Error is: 'weblogic.application.ModuleException: ' weblogic.app
Upon doing a search on this i found that these errors occur only after when we trying to deploy any application, but its a fresh installation and we are not trying to deploy any thing yet and we should not get this error.
Any Help?
Edited by: user12128585 on Aug 6, 2011 12:55 AM

Mail fails to load

Imac was in storage from june to December. I have updated software. Mail now fails to load. First got the v4.5 mail message and found the 'fix' and have tried that 'twice' loaded the combo 10.6.8 v1.1 and the security 2012-004 snow leopard. checked that mail v4.6 exists in applications removed v4.5.
I have tried creating a new user. Same problem the new mail icon exists and jumps once then nothing. MAil will not load by trying to load the app directly, ie open. The icon points to the right application.
Mail was working before the upgrade.
All other applications including all ms apps work

You appear to be missing Resources, worth 68.1MB. Right click on Mail.app to see Package Contents. I'm betting Resources is AWOL. If you still have the 4.5 around, you could move Resources out from there into the new one. But doing that will change you to the owner, which won't be right. You must change it back in Get Info (CMD-I) for Resources, as per the screenshot below. Unlock the padlock to do that. Make sure to hit Apply to enclosed.

Nvidia module in X fails to load after Patch 118844-28

I'm new to Solaris so please bear with me.
I just received a shipment of Ultra 20 workstations and while setting up one of them, I used the Update manager to install all the patches. After installing the kernel update, X fails to run since the Nvidia module doesn't load, which makes sense since its a new kernel(Is this wrong, I'm used to Linux).
So I download the latest nvidia module from Nvidia.com and the installer runs with no problem. I reboot and still no go.
I've looked around and found something about using the update_drv command, and I tried that with no luck. Used reboot -- -r to reconfigure everything and still nothing. There is nothing that stands out from dmesg, so I'm at my wits end.
Any ideas?

After installing
the kernel update, X fails to run since the Nvidia
module doesn't load, which makes sense since its a
new kernel(Is this wrong, I'm used to Linux).I don't know why X or the Nvidia module fails after the kernel
upgrade...
But for Solaris is does not make sense that drivers start to fail
when the kernel is patched. This assumes the driver is using
documented kernel interfaces only - in this case a kernel update
should not cause driver failures.

Mail failed to import after Mavericks upgrade

Just upgraded to Mavericks and have all current updates - went to open mail and got the following message:
Mail failed to import.
An error occurred during the import. Make sure you have available space in your home folder and try again.
I have a pretty "clean" Macbook Air - not much on it so can't imagine I'm anywhere close to not having available space. Help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Mail struggles to load after ios 8

Anybody elses email struggling to load after ios 8 upgrade?

Hi ..
It's working fine on iOS 8 here.
Try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

HT1222 iLife apps fail to launch after running latest Software Update

Hello,
I ran the Software Update (running Snow Leopard on a MBP) on Feb 6 which updated Remote Desktop (never use it) and also had a Security Update 2012-001 v1.1
Used Mail and Safari successfully after that but noticed Opera failing to launch. Thought it was an issue with Opera so didn't pay it much mind.
Tonight (Feb 7) I wanted to off load photos from my phone and discovered that iPhoto wouldn't launch and neither will iTunes. I haven't seen any other discussions related to this, but if there is one, please point me in that direction. Cheers.

Miriam,
I read the selection in MacFixit and went through the steps that they suggested.
I even downloaded MacOSXUpdCombo10.4.10PPC.dmg and when I went to re-install it the program Installer quit unexpectedly in the same manner that Safari, Mail, and Software Update did.
I also noted that when I tried to start either Safari or Mail using the terminal (I don't have much expertise in this area) they stated that there was a segmentation fault
Here is what was on the terminal screen:
Last login: Tue Jul 17 12:28:25 on ttyp1
/Applications/Utilities/Installer.app/Contents/MacOS/Installer; exit
Welcome to Darwin!
wilbur-purdues-imac-g5:~ wilbur$ /Applications/Utilities/Installer.app/Contents/MacOS/Installer; exit
Segmentation fault
logout
[Process completed]
It seems that I can install other programs using Installer, but I cannot do the upgrade. Maybe I have the wrong file.
Thanks for the support so far.
iMac G5 (insight) Mac OS X (10.4.10)
iMac G5 (insight) Mac OS X (10.4.10)

Mail failing to load after 10.8.1 update

Similar Messages

Maybe you are looking for