Mail flag count does not match the number of flagged emails on iMac

I have seven emails noted in the "Flagged" category on my iMas (OsX) but my flagg oount shows "8". I have tried rebuidling, looking at support comments, etc. but nothing seems to work for the latest software update. Any suggestions would be greatly appreciated.
Thank you very much.

Ok, There are a few more things that may help out (and please remember I'm only a novice at this too, but I'm trying to 'Pay it Forward')... 1) Try 'Synchronizing all Mail Accounts (it's an option in Mail under the pull down screen labeled 'Mailbox' (and remember, you will have to 'Restart' your Mac for the changes to take effect!) or try 2) Rebuilding your Mail account (probably an option of last resort) or 3) Go into Advanced options and delete any extraneous mailboxes you may have inadvertently created. (and Restart your Mac each time!) Good luck, have patience and write again if you have too.

Similar Messages

SAP R/3 instance does not match the number of columns in schema error

Hi Gurus,
Badly need your help, I am currently on dead end here, I cant' think of any resolution for this error message, I have tried almost everything trying to resolve it. Kindly advise..
error msg:* 1306806 3342 R3S-140113 3/23/2010 9:54:47 AM The number of table columns <0> in an R/3 instance does not match the number of columns <8> in schema. Operation*
source: R/3 database
target: Oracle 10G DBase
Tool: Busines Objects Data Integrator 11.7
Many Thanks!
Randy Reyes
Philippines

Hello,
Maybe the following is applicable in your case:
I don't know exactly what you are doing in the BOBJ system but are you using an RFC read table function?
If yes this may be the problem. RFC ReadTable is OK to do some tests but is not scalable. Plus there is a limitation
with the RFC_READ_TABLE function in terms of number of characters returned (up to 512 characters), you
should use R/3 dataflow instread:
Please find below the link which explains how to use the R/3 Dataflow:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bobj/readingviaABAP
I hope this helps,
Best Regards,
Des

When firefox is minimalized, it does not show the number of new emails in my inbox

Using Windows 7 on an HP Pavillion dv6-3225dx Entertainment PC

Thanks for the help. The only one which worked was Gmail Watcher which does not change the icon. But it provides similar functionality by creating a periodic message visible at the bottom left of the screen telling me how many unread emails are in my inbox.
The ones I tried which did NOT work were:
Gmail notifier by Kang;
Gmail Manager by Long
Gmail Checker by Nguyen; and
Gmail Favicon Notifier by Pendelton.

Number of mail messages does not match the number in mail activity

This is not a big deal but I have noticed that when mail arrives the Mail Activity window tells me how many incoming messages are being downloaded. This number often bears no relationship to the number that arrive. For example it might read 4 messages are downloading when in reality only 1 arrives. If I look at my webmail all messages are listed. Does anyone know what causes these inconsistencies?

I do not have any answer, but I have the same problem. AND the RSS feeds do not make up the difference; and yesterday I disabled junk mail filtering. And I've made certain that I have no unread mail left over. Yet Mail Activity reported downloading 16 messages, but I only received 8. This happens daily, but the proportion of unaccounted emails varies.

App Signing Error, Number of Folios Does Not Match the Main Folio File

Hi All;
I have a 250 page standalone app that I am trying to compile for the Apple Store. I read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my user directory to capture the issue. Here is the snippet of the log that was created that, to me, shows why the app isn't being signed.
46386 ERROR [main] codesign.Signer - Failure during signing
java.lang.RuntimeException: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
          at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio(IPAOutputHelp er.java:272)
          at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio(IPAOutputHelper.java:1 92)
          at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)
          at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)
          at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)
          at com.adobe.devtech.codesign.Signer.main(Signer.java:46)
46388 ERROR [main] codesign.Signer - Error: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
I've stripped out special characters from the article titles and re-built the app only to face the same error. I went ahead and created a new AppID in the Apple Developer Portal, created new provision files, and the error remains. I am now creating a new folio and importing the articles into the new folio to see if that will solve the "number of folios does not match" issue.
Any help or insight would be amazing. Thank you all.
-matt

I created a new folio and imported all of the articles again. After hitting "Create App" for this new folio, at about 10 pages in a "PDF Export" error stopped the create app process. I went into InDesign to update the layout for the 10th page to see that the PDF export issue was stopping me from updating the layouts as well. Something in the InDesign file wasn't playing nice with the folio creation, so I created two new InDesign files, deleted the article, and built a new article from scratch. I was able to import the new layouts as a new article to the main folio and hit "Create App" again. This time there were no issues with the creation process. I synched up the provision files in App Builder and was able to code sign the application.
I guess the moral of the story is to double and even triple check every article along the way to make sure there are no issues being introduced into the process that will ultimately cause headaches during the distribution phase of app creation!
-matt

The serial number on my new boxed photoshop bought from Staples does not match the required number of numbers to install. Help

The serial number on my new boxed photoshop bought from Staples does not match the required number of numbers to install. Help

You’ve posted your comment in the Adobe Creative Cloud forum. Adobe Creative Cloud doesn’t use serial numbers. Does this page help with determining what to do with the number you have:
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

CS4 Upgrade, the serial number you have entered does not match the product you have selected

I have a valid CS2 premium license and have installed CS4 upgrade to a new machine but get the dreaded error "the serial number you have entered does not match the product you have selected" Now I got this error when I originally installed in 2009, back then I could call customer service and get the problem resolved but now when I phone I get an automated message saying phone support is not available for CS4? Does anyone know of a work around or a UK number where I can get this resolved? Any help would be appreciated.

Please see: http://www.hp.com/country/us/en/mda/windows7/upgrade/index_ww.html to select your correct country or region.
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

Job Cancelled with an error "Data does not match the job def: Job terminat"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job   Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

Dear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Regarding "Data does not match the job definition; job terminated"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Hi dharmendra
Good Day
How are you
I am facing the same problem which you have posted
By any chance have you got the soultion for this
If so please let me know the solution for this.
Thanks in advance.
Cheers
Vallabhaneni

Exchange 2013 w/Outlook 2013 "The name of the security certificate is invalid or does not match the name of the site"

I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of. I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013
clients get prompted for a security warning. I just implemented the SSL cert yesterday and I've noticed that new installs of Outlook seem to work just fine. My Outlook 2013 client doesn't prompt me with the message but I have other users who are
still getting the "The name of the security certificate is invalid or does not match the name of the site" error. The domain on the cert error show up as server.mydomain.local. I've gone through all the virtual directories and pointed
all of my internal and external URL's to https://mail.mydomain.com. This made one of the two warnings go away but not the second. I've dug around on google and gone through everything I could find here and as far as I can tell my internal
and external url's are configured properly and I can't figure out where this error is originating from. Any ideas on where I should look outside of the virtual directories?
I'm including a good link I found that contains all of the virtual directories I updated. I've checked them through both CLI and GUI and everything looks good.
http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/

Hi,
When the Outlook connect to Exchange 2013/Exchange 2010, the client would connect to Autodiscover service to retrieve Exchange service automatically from server side. This feature is not available in Exchange 2003 Outlook profile.
Generally, when mailbox is moved to Exchange 2013, the Outlook would connect to server to automatically update these information. It needs time to detect and update the changes in server side. I suggest we can do the following setting For autodiscover service:
Get-ClientAccessServer | Set-ClientAccessServer –AutodiscoverServiceInternalUri https://mail.mydomain.com/autodiscover/autodiscover.xml
Please restart IIS service by running IISReset in a Command Prompt window after all configuraions.
Regards,
Winnie Liang
TechNet Community Support

Getting Error message ""This set top box does not match the account settings"

Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards, Rick

your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
Your choice 4 hour appointment window, or time on phone , or chat.
If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
Set aspect ratio MENU, OPTIONS, etc.
should take about 20 minutes per receiver.

Outlook Security Alert - "the name on the security certificate is invalid or does not match the name of the site"

Due to our company changing names, we recently moved to a new domain. All users were at first getting a certificate error when opening Outlook "the name on the security certificate is invalid or does not match the name of the site." After our network
admin made some changes, nobody receives this error anymore except one user. The URL at the top of the security alert is the old domain, mail.olddomain.com. I checked the users Exchange Proxy Settings in Outlook, everything is showing the URL's of the new
domain so I'm not sure where this is coming from. I'm assuming it has to be something on her local machine since she is the only one who still gets the error.
Thanks in advance for any help.
Exchange server 2008
Outlook 2010

Hi,
Please follow all above suggestions to confirm whether the issue happens in OWA. And run Test E-mail AutoConfiguration in Outlook to check whether there is any URL settings using the old domain.
If the issue doesn’t happen in OWA and your URL configurations are all same as others and set correctly, please create a new Outlook profile to have a try.
Thanks,
Winnie Liang
TechNet Community Support

There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

Mail flag count does not match the number of flagged emails on iMac

Similar Messages

Maybe you are looking for