Mail for Exchange 3.00(50) does not keep the alway...

I have an issue with the Nokia Mail for Exchange client version 3.00(50) where the always on connection it is supposed to maintain with the server gets dropped.
I have also encountered this issue with a previous version of the client 2.9.158.
When this occurs the current status of the Mail for Exchange client reads: "Unable to connect. Retrying.
The client then connects and performs a sync every 15 mins and then disconnects immediately when done.  This 15 min cycle repeats, so the phone is not always online, but instead runs on 15min intervals. 
The Mail for Exchange log shows the following:
24/05/2010 09:42:03 Cancel Job:0, Type:"PING Job- Always-Online":
24/05/2010 09:42:06 start E-mail sync
24/05/2010 09:42:06 client->server adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:06 server->client adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:06 end Email sync
24/05/2010 09:42:06 start Sent Items sync
24/05/2010 09:42:07 client->server adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:07 server->client adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:07 end User sync
24/05/2010 09:42:07 PING Command Requested
24/05/2010 09:42:08 start E-mail sync
24/05/2010 09:42:09 client->server adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:09 server->client adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:09 end Email sync
24/05/2010 09:42:09 start Sent Items sync
24/05/2010 09:42:09 client->server adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:09 server->client adds=0 changes=0 deletes=0 fails=0
24/05/2010 09:42:09 end User sync
24/05/2010 09:42:09 Starting a New Ping
24/05/2010 09:48:41 Exception during Ping.
24/05/2010 09:48:41 New heartbeat = 4.
24/05/2010 09:48:41 HTTP Server Error 408 : Request Timeout
24/05/2010 09:48:41 Starting a New Ping
24/05/2010 09:52:48 Heartbeat expired. Re-issuing ping.
24/05/2010 09:52:48 New heartbeat = 6.
24/05/2010 09:52:48 start Email sync
24/05/2010 09:52:48 Nothing to sync
24/05/2010 09:52:48 end Email sync
24/05/2010 09:52:48 start User sync
24/05/2010 09:52:48 Nothing to sync
24/05/2010 09:52:48 end User sync
24/05/2010 09:52:48 Starting a New Ping
24/05/2010 09:59:19 Exception during Ping.
24/05/2010 09:59:19 New heartbeat = 4.
24/05/2010 09:59:19 HTTP Server Error 408 : Request Timeout
24/05/2010 09:59:19 Starting a New Ping
24/05/2010 10:03:24 Heartbeat expired. Re-issuing ping.
24/05/2010 10:03:24 Error occurred during Ping.
24/05/2010 10:03:24 Exception during Ping.
24/05/2010 10:03:24 Mail For Exchange Error -15051
24/05/2010 10:03:24 Set SimulateAlwaysOn mode : 1
24/05/2010 10:04:56 PeakTime active
24/05/2010 10:05:56 start E-mail sync
24/05/2010 10:05:56 client->server adds=0 changes=0 deletes=0 fails=0
24/05/2010 10:05:56 server->client adds=0 changes=0 deletes=0 fails=0
24/05/2010 10:05:56 end Email sync
24/05/2010 10:05:56 start Sent Items sync
24/05/2010 10:05:57 client->server adds=0 changes=0 deletes=0 fails=0
24/05/2010 10:05:57 server->client adds=0 changes=0 deletes=0 fails=0
24/05/2010 10:05:57 end User sync
Does anybody know where the HTTP 408 error comes from as I don't believe it comes from the server?
Also can anybody give a reason why the ping is not working and if there is a work around for it?
What is the meaning of the MfE error 15051?

Hi, I am afraid I cannot answer your specific question about the pings / error.  I can confirm I have the same problem on my E71, running the latest firmware 410.21.010 and MFE 3.00.050.
I did some searching and this seems a common fault with 3.00.  Apparently it didnt happen in version 2.7.  I got a version 2.7 and tried for a few hours without problem but didnt do an extensive test as 2.7 doesnt support folders which I need.
The always on connection does appear to work for a while following a reboot but frustrating as hell when it stops because as you say it then only updates every 15 minutes.

Similar Messages

  • I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

    I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Native error code -214721788​7 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties​.

    I configured MySQL in TestStand and making a query in TestStand like this:
    Command :=> "SELECT *  FROM crc_table ; " or  "SELECT CRC_Value  FROM crc_table ; " returns the total number of records without any errors.
    But when I add the "where" clause
    "SELECT crc_table.CRC_Value  FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
    I get the error as:
    Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
    I tried the same syntax in MySQL Query Browser and got the correct result:
    SELECT crc_table.CRC_Value  FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
    I would appreciate your help.
    Thank you,
    Vidula

    Vidula,
    I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed.  In your SQL statement you must properly concatenate your strings with your variables.  In the statement you posted you were simply putting the variable names in the string, not actually pulling their values.  To do so properly your query should look something like this:
    "SELECT crc_table.CRC_Value  FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
    This way we are using the values of the variables in conjunction with the text strings.  In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
    Message Edited by herosphro on 04-01-2008 03:52 PM
    John B.
    Applications Engineer
    National Instruments

  • The free space for my iphone on itunes does not match the free space on my iphone after syncing.

    The free space for my iphone on itunes does not match the free space on my iphone after syncing. iTunes shows 6.7 G free, but my iphone shows 6 G free. Why such a delta?

    They've never sussed this out - been a problem the last year or two for me regardless of all the new iOS versions and iTunes versions. Regardless of multiple resets and full restores.  Mine showed 3.7 avail on computer, less than .5 on phone.  I did a reset and full restore.  It helped - but still differs dramatically - now showing 5.8 avail on computer but only 2.9 on phone.
    APPLE!!! I have spent 10s of thousands on your products both at my business and home - why?  "Because it just works" I've been telling people.  Not sure if I can keep on saying that if you don't get this figured out!!

  • I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

    It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

  • Why the iphone4 during a call does not keep the 3G?

    why the iphone4 during a call does not keep the 3G?
    I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

    Oniplay wrote:
    I tried to restart, the problem still remains.
    Make sure you do a reset, not a restart. Press and hold both buttons, ignore the "slide to turn off" message and let go of the buttons after the Apple logo shows up on the screen.
    If you did that and it did not bring any change, try to set it up as new device, as explained in this article:
    How to back up your data and set up as a new device
    If it does not work the first time, try not to use the backup afterwards in a second attempt, in case it contains corrupt data.
    If still no luck, get it serviced:
    Apple - Support - Service Answer Center

  • In a purchase order for 3 GR's Quantity does not equal the value

    Hi,
    I have found the difference in one purchase order, there have been 3 GRs where the Qty does not equal the Value.  How has this happened?
    Any guesses why the difference has come.
    Thanks&regards,
    Veena

    Hi Vishal,
    In po history for agt 3 Gr's  Quantity does not equal the values. I hope the difference is Movement types. But exactly where to check this movements i am not getting.
    Can you tell me this which T.code.
    Tx,

  • When I try to click on a download link for a .pdf file Firefox does not recognize the MIME type and tries to download the file as "index.php"

    When visiting a site I frequent I tried to download a linked .pdf file. Previously I've used Firefox 7.0.1 to download the link with no problem. Using Firefox 8 however I the browser does not recognize the .pdf link's mime type. Instead of recognizing the download link as a .pdf file Firefox 8 tries to download it as "index.php". Firefox 8 does this with .doc files and .txt files as well. When I downgrade to 7.0.1 again the problem disappears.

    Hi hakmacpace,
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
    You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
    Hopefully this helps!

  • My iPhone 5C does not keep the correct time.

    The Time randomly changes by hours and minutes.  This morning it was off by 3 hours plus some minutes.  I am in the correct time zone and the Date & Time is set to Automatic; Time Zone is New York.  I have another iPhone 5c in my house hold and it does NOT experience the same issue.  Both iPhones are using the same Apple ID.  I have not reset the phone yet because I will lose all previous text messages etc.  I m also not able to connect to yahoo mail when the time is off and I am forced to send Text messages as opposed to iMessage, which has caused problems with my contacts NOT being able to text me.  This is a huge inconvenience.  I am on AT&T.  I went to their Corporate store today and they told me they were unable to assist me, that I need to take my phone to an Apple Store.  This is not acceptable.  The nearest iPhone store is more than 30 minutes from my work AND home.  I work late hours and it is very difficult to have to deal with this type of an issue.  Please assist.

    JRoet wrote:
    The Time randomly changes by hours and minutes.  This morning it was off by 3 hours plus some minutes.  I am in the correct time zone and the Date & Time is set to Automatic; Time Zone is New York.  I have another iPhone 5c in my house hold and it does NOT experience the same issue.  Both iPhones are using the same Apple ID.  I have not reset the phone yet because I will lose all previous text messages etc.  I m also not able to connect to yahoo mail when the time is off and I am forced to send Text messages as opposed to iMessage, which has caused problems with my contacts NOT being able to text me.  This is a huge inconvenience.  I am on AT&T.  I went to their Corporate store today and they told me they were unable to assist me, that I need to take my phone to an Apple Store.  This is not acceptable.  The nearest iPhone store is more than 30 minutes from my work AND home.  I work late hours and it is very difficult to have to deal with this type of an issue.  Please assist.
    Doing a reset, does not cause you to lose data, however a restore as new will.
    a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't work restore from your backup, if that doesn't work restore as new.  If that doesn't work, then schedule an appointment with the Genius bar and take trip to the Apple store.

  • I am able to login to the Web, but when attempt to run the installer, it ask for a password and it does not work the password I used to login in the web.

    I am new to Adobe Cloud, received the invitation from Adobe, create my account and I am able to login to the web. When Attempted to download Photoshop desktop, I was asked for Name and Password, the name was populated but I have to enter the password. I am using the password I entered at registration but it does not work and the Installer does not run.
    I have a MacBook Pro with OS version 10.9.3.
    Thanks,
    Carlos

    I figured out, the Installer need the username and password for the computer OS.

  • Using Mac Mail.. My signature font does not match the entire message..

    Message font size is too big.. Tried both checking and un-checking the "Always match my default message font", had the same problem.. Need help fixing this issue as my emails do not look professional at allllll!!!!

    Hi Raj Krish,
    For ASP.NET related issue, please post to the following forum:
    http://forums.asp.net/
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Bridge does not keep the manual sort order

    I've tried everything I know but I cannot get Bridge to keep the manual sort order (iMac, 10.6, CS4). What is the file responsible for keeping the sort order? Perhaps removing it would help. This is really frustrating. It would be so important to keep related pictures together for estimating all the aspects.

    This is action script 3.0 Flash CS3
    Below is what I receive back after I test it but it is not in
    order. I guess I assumed that if the tab order is correct and the
    are layout in that order and the code in the form is in order it
    would come back the same way. Mostly I am trying to narrow down the
    problem and my guess is the cgi script or am I wrong? I have
    attached the code for the form.
    Thank You for you time
    Form email submission results:
    Below is what you submitted on Tuesday, February 19, 2008 at
    10:35:08
    list:
    phone:
    address:
    comments:
    city:
    state:
    zip:
    name:

  • Itunes for Windows 7 64 bit does not recognise the iPhone 3G

    I have just installed windows 7 x64bit on my pc. I have downloaded the itunes for windows 7 x64 and it seems to have installed correctly. I have reset my iphone (as my old one packed up with the home button, so Apple replaced it as it was still within the warrenty)and now when I connect the newly formated iphone to itunes, I get the following error,"this phone cannot be used as the required software is not installed. Run the itunes installer to remove itunes, then install the 64 bit version of itunes"???? i am assuming that the itunes download 'iTunes64Setup.exe' is the correct installer package for the 64bit version of windows7?
    does anyone have any ideas of this, I am really missing my iphone.

    now nothing happens when I connect the iPod by USB - it's not even charging.
    Do you have a laptop, Nin?
    If so, the following document might be of some assistance with that:
    [iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
    (That issue seems to match your recognition and charging symptoms.)

  • I am trying to download an app for my iphone but it does not load the store

    Hi
    I am trying to download an app from the store, but when i go to do a search for it, the phone just stops searching. Please help

    Hi Robertfrom Denver.
    Did you try the solution given, and if yes, did it work?
    I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
    I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
    HelenfromBroughton Astley

Maybe you are looking for

  • Interface for sending last changes with the format of theIDOC type HROT_USM

    Hi guys. Customer has asked me to create an interface which sends every day all records changed (for normal ITs: 0, 1, 6, 7, 8, 9, 16, 40, 41 & 105) from the last execution. This information has to be send in a flat file with the same format of IDOC

  • How do I get the website icon to stay on the desktop?

    When I save a webpage to my desktop, via "drag webpage address to desktop", the website icon is replaced by a mozilla icon. How do I get the website icon to stay on the desktop?

  • Controlling image width in XML brought into TextField via RSS

    Hello. First off, let me say that I am new to these forums, and new to AS 3.0 Here's my question. I'm building an RSS Reader. Everything is working great, except I can't figure out how to control the size of images embedded in the XML of the blog pos

  • Double Click In Some Programs/Clear Suggestion Bar

    Hi, Does anyone else have a issue where your Mac will click twice in some programs, such a Launchpad or Dashboard? Also the suggestion bar is transparent on Safari. These happened to me after i upgraded to Yosemite. Do you have a solution? I reported

  • Save Part of Image

    I have a question here. Now, I have a scanned picture and if I were to save the whole picture, it is a was of disk place. Can I save only part of the picture? If yes, can I know where can I get the guides or samples regarding this. Thank you.