Mail for Exchange E61: getting "system error" whil...

Hello everybody !
our company is using MS Exchange 2007.If try try to sync the calender I am getting a "system error".
Synchronizing the e-mail works fine.If I look in the admin log I see the following error.
22/04/2007 01:15:49 start Calendar sync
22/04/2007 01:15:51 client->server adds=0 changes=0 deletes=0 fails=0
22/04/2007 01:15:51 server->client adds=0 changes=0 deletes=0 fails=0
22/04/2007 01:15:57 sync died (3), collection=Calendar activity=encoding sync command
sync died due error 3.Does someone know what err 3 means ? It would be very kind of you if someone interprets this log or is someone experiencing the same problem with MS Exchange 2007.
I did not have this problem with MS Exchange 2003.
All help would be greatly appreciated !
Kind regards,
Kuskaya

Hi,
updated the firmware.It works fine after firmware update.Exchange 2007 requeries the latest firmware.
Regards,
Cengiz Kuskaya

Similar Messages

  • Mail for Exchange on E71 - system error please try...

    Can anyone help me please.  I have been running MfE on my E71 and others at work successfully for years with our Exchange server 2003.  Just recently and it would seem to be when we go out of a roaming area MfE comes up with the error message "system error please try again later".  The only solution that I have found is to restore the last backup I made on my PC using PCSuite and then it works OK for another couple of days.  Has anyone else had this experience and knows of a fix?

    Hi,
    I am having this same issue.
    I have deleted everything and redone the account, still same issue.
    I have two E71's infront of me, both on the same network, both same contract, both same settings.
    One says Idle, the other connected.
    Blasted phones.

  • Mail for Exchange already in use error when sendin...

    We have a number of Nokia E50-1 on Vodafone network which we are using Mail for Exchange 2.5.3 (mfe) to sync emails with a microsoft Small Business Server 2003 (SBS2003). When we try to reply or send a new email from the E50 we get the error "Mail for Exchange: Already in use". This happens even if the sync is set to manual and email is set to send with next sync. Very ocassionally a message will go if we keep retrying.
    Does anyone know how to resolve this?

    hi all,
    great forums, hopefully someone has some more info on this, as i am getting the same issue.
    I had mail for exchange working with my e71 no worries and then i added my home TPG account. the TPG account would not work for some reason, not that it overtly worried me, but then when i tried sending mail through exchange (either reply or new mail) i get the error message 'Mail for exchange: already in use'
    I have removed the TPG account, rebooted the thing several times, all sorts of stuff - nothing seems to work. it is still syncing and i am receiving email, i just can't send...!!
    any troubleshooting tips or further info would be greatly appreciated

  • Getting "SYSTEM ERROR" while generating a PDF in a Workflow method.

    Dear All,
    I'm getting a "SYSTEM ERROR" when I'm calling the below function module in a Workflow BO Method.
    CALL FUNCTION wa_funcnm
       EXPORTING
         /1bcdwb/docparams  = fp_docparams
         invoice                     = invoice
       IMPORTING
         /1bcdwb/formoutput = fp_formoutput
       EXCEPTIONS
         usage_error        = 1
         system_error       = 2
         internal_error     = 3
         OTHERS             = 4.
    The aim is to generate the PDF and store it in DMS. Please let me know, if I'm going wrong somewhere. Any kind of inputs would be sincerely appreciated.
    Regards,
    Tushar.

    Hi Tushar
    You need to the following parameters when calling FM. Background WF process cannot handle dailog.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
    Refer to Thread below
    Creating Attachments to Work Items or to User Decisions in Workflows
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
    i_name     = l_formname
        IMPORTING
    e_funcname = l_fm_name.
    *   E_INTERFACE_TYPE           =
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel          = 1
    usage_error     = 2
          system_error    = 3
    internal_error  = 4
    OTHERS          = 5.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.
    fp_docparams-langu = 'X'.
    fp_docparams-country = 'US'.
      fp_docparams-fillable = 'X'.
      CALL FUNCTION l_fm_name
        EXPORTING
    /1bcdwb/docparams  = fp_docparams
    emp_info           = fs_per_info
        IMPORTING
    /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
    EXCEPTIONS
    usage_error        = 1
          system_error       = 2
    internal_error     = 3
    OTHERS             = 4.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0
      CALL FUNCTION 'FP_JOB_CLOSE'
    *   IMPORTING
    * E_RESULT             = result
       EXCEPTIONS
    usage_error          = 1
    system_error         = 2
    internal_error       = 3
    OTHERS               = 4
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0.
    ENDFORM.                    " GET_FUNCTION_MODULE
    *& Form  CONVERT_PDF_BINARY
    FORM CONVERT_PDF_BINARY .
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
    BUFFER                = FP_FORMOUTPUT-pdf
    *   APPEND_TO_TABLE       = ' '
    * IMPORTING
    * OUTPUT_LENGTH         =
        TABLES
    BINARY_TAB            = t_att_content_hex .
    ENDFORM.                    " CONVERT_PDF_BINARY
    Regards
    Sandy

  • Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

    Getting below mentioned error while installing a package  in the windows 2012 server remotely through psexec command
    Error 1718. Windows Installer Service could not be accessed.
    The same msi is getting installed local in through when we are doing through manually
    Please help on the same

    Hi Rahulan,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    Just addition, please refer to following threads and check if can help you.
    The Windows Installer Service could not be accessed.
    error 1719 windows installer service could not be accessed ....
    Hope this helps.
    Best regards,
    Justin Gu

  • Asha 300 and Mail for Exchange error - will not in...

    Hi there,
    I have just purchased an Asha 300 to trial Mail for Exchange, however every time I try to install Mail for Exchange I get the error message "You are running an unsupported OS version.  Please upgrade to OS14.53 or later".  When I try to do a software update from the Nokia Suite it says there are no updates available and the software version in v07.57. 
    On the Mail for Exchange application it clearly says that the Asha 300 is a compatible device.
    Has anyone come across this before, or any ideas how to get it working?
    Thanks in advance.

    Please, have a look at the 7-letter code printed on your device (product code). That determines the firmware variant you have. And the firmware variant determines which updates you get. Consequently, what is your product code?

  • No in-office WLAN connection to Mail for Exchange ...

    I have installed "Mail for Exchange" on my X6 and am able to connect to exchange server via wifi from home, or in fact most other wifi access points, but not from within my office.
    My office setup is a conventional LAN and comprises Draytek wifi router/modem feeding into a 16 port fast switch then distributed to networked PC's including the server running SBS2008/Exch Serv 2007.
    I am able to connect, without any trouble, to the internet at large through the WLAN, but just cannot synch to the exchange server.
    Any help to get in-office connectivity would be most welcome.

    I'm having that very same problem. I can't see a solution to it anywhere. The coinciding entries in the mail for exchange logs are Server Error 501: Not Implemented
    I'm using an N8-00

  • Mail for Exchange no new E-mail no Sync

    I use an E71, N97 and N85 to connect to an Exchange 2007 server.
    All works fine when there is new mail but when there is no new e-mail on the exchange server Mail for Exchange gives a Connection Error, try later.?? and doesn't sync my calendar (the second task).
    Please help.

    Hello,
    I'm having the same problem with Nokia E50 and Exchange 2007.
    Log says: HTTP error 501: Not Implemented
    Stefan
    Message Edited by s_t_s on 16-Oct-2009 06:29 AM

  • E61 Mail for Exchange error -15002

    I have an E61 that I'm testing for use with our Exchange Server 2003 (SP1 at the moment).
    I have everything set right, or at least what I think is correct.
    When I try to use the Mail for Exchange, I try and sync and just get an empty dialogue box with an ! in it. When I use the file manager to look at the log file (admin_log1), I just see the following error:
    System Error -15002
    I have googled that error, look over my Exchange server's logs, and looked over some posts here. Nothing that would shed the light on why this is happening.
    I'm hoping to be able to dump our corp. blackberry's for devices like this, but I cannot get it this connector to work. POP3 and OWA work just fine, but those are very limited in functionality.
    Thanks,
    Michael

    Thanks Sojan7,
    You were right, the exchange server field is to be only the public url like servername.com without any http or /oma /exchange..
    I also had some faults in my security settings in IIS that you others with this "empty dialog" problem should check.
    1st. ActiveSync can´t use basic authentication, so you must make sure that integrated windows autheticatiation is on, for your /exchange-oma (or exchange for those who uses that one)
    2nd. On my SBS the wizard had changed the security on Microsoft Server -ActiveSync to only accept the servers own IPs to connect.
    3rd. I could not get it to work if you require to use certificates on the exchange-oma, úsing -Require SSL connection- dont work, but it can still be chosen in the phone without problems.
    Also for some, you shouldn´t use a proxy in your gprs connecion.
    Hope this can help you
    Edited
    m_shaharizaiMessage Edited by m_shaharizai on 28-Sep-2006
    07:11 PM
    The real sport is finding a simple solution to an issue, where others others have failed, in a topic you know nothing about, still keeping everyone happy - that´s Passion!
    Even small wings can do great things.. http://www.micropter.se/pro_mob.shtml

  • Mail for Exchange System Error, try again later. F...

    my E71 running S60 Mail For Exchange works fine for email, but as soon as we start syncing calendar, we get this error "System Error. Try again later"
    i have researched further. The phone log shows the sync falls over on outlook recurring appointments. Some threads suggest the offending appts are those without end dates and adding them will fix it, but this is not correct. Our recurring appointments are created in Maximizer and synced to Outlook. They all have end dates which show in both Maximizer and Outlook.
    The log message on phone is: "Failed to store calendar entry in device database". If you google that you come across the link to another thread
    /discussions/board/message?board.id=messaging&thread.id=7858
    where it seems that MFE simply does not work properly with Outlook calendar recurring appointments and no solution is offered by Nokia. E71's run Symbian S60 and Mail For Exchange is the Nokia offering, which appears to be a derivative of Roadsync. Both appear to have the same shortcoming. Even the latest MFE version, V2.09.158, contains the problem, as we just upgraded on phone to try for a fix.
    We have a fleet of E71's, having reverted to Nokia from Win Mobile devices. We were even looking forward to N97's, but we are now planning to move back to a Windows Mobile device. At least we can see the calendar on these!
    For now, we have to remove calendar syncing on phone and delete all calendar entries, so the phone again syncs for email and contacts.
    Nokia, how about a FIX before your new generation of "Smart Phones" are consigned to the wastebin? Please don't just tell us to change a setting on the server, unless you know it works.
    This is your last chance with us. Time is too precious  to waste on dodgey software.

    More info on this - the  problem appears to relate to only Outlook 2007 and not XP.

  • Nokia N95 Mail For Exchange "Systems Error PLease ...

    I am the I.T Person for a Transport Company in Australia
    One of my users have a Nokia n95 and when i installed MFE it all worked Fine and had no drama's
    However another User Has a Nokia N95 and i installed Mail for Exchange and configured it and everytime they go to re-sync they get the Error Systems Error Please Try Again Later!!!!
    The Phones have the same version of MFE so i do not see what the issue is?
    There has been no Exact fix for this issue and i am trying to work out what to Do!!!
    If anybody has ANY hints please help i am getting to the end of my knowledge
    regards
    Matt

    I'm sorry, I don't want t sound rude, but if you read the messege board which address I posted earlier, you'd see they DO provide the adresses.
    Here, one of those posted there:
    s60v3: http://www.megaupload.com/?d=VY9RYO7C
    s60v5:: http://www.imserba.com/forum/attachment.php?attach​mentid=217477&d=1256135927
    Or, you could just write "Mail for Exchange 2.9.158 download" in Google...

  • E71 Mail for Exchange System Error, try again late...

    Hi,
    Please Help!
    I installed MfE 2.7 on my E71, but whenever I try to sync my email and calender, I get a system error.
    It begins to sync the email but after that it doesn't sync the calender and I get the system error. Also each time it tries to sync emails, it retrieves all the mail each time.
    If I sync only the calender, it retrieves all the items and I get a system error. I've pasted the admin log below.
    27/10/2008 10:17:42 start Email sync
    27/10/2008 10:17:53 sync died (11), collection=Email activity=handling commands from server
    27/10/2008 10:22:36 PING Command Requested
    27/10/2008 10:22:42 start Email sync
    27/10/2008 10:23:01 sync died (47), collection=Email activity=handling commands from server
    Does anyone know how to solve this?

    OK - like many on the copius web discussions on this Nokia E71 model/MfE topic I have been getting terminally frustrated with an otherwise great phone.
    A trawl through the websites gave me lots of things to try, but most didn't work.
    Our large corporate IT dept also were left scratching their heads, and resorted to a full reset, which cured the problem briefly, but as with others' experience it soon returned (also having to fully reconfig is a pain in the proverbial). Things suggested on the discussion sites like disabling Tasks synch, or Secure Connection didn't have any effect.
    The fact that most others with the same phone on our system hadn't experienced the problem seemed to hint at it not being a server issue, but something more localised. The apparent fact that 'Emails' did synch OK, but that the process hung on 'Calendar' synch suggested it was a Calendar issue
    One post mentioned issues with no-finish-date recurring appointments in Calendar, so I investigated these. I found that one or two had no end date, so I gave these items one.
    But interestingly, I also found a high proportion of appointments that had been created last year (09) had end dates like 'Wed 31/03/00' when clearly 'Wed 31/03/10' was intended - was this an odd default in Calendar, or just careless typing? The consequences were that Calendar was possibly wrestling with numerous recurring appts with either 100-year durations, or possibly just hanging on the date confusion - is '00' before or after '10'?.
    Therefore, as a precaution, I checked all my recurring appts like this (the procedure may vary according to your browser):-
    - In Calendar, open each recurring appt in turn;
    - Open the series, not just the individual appointment;
    - Check 'Recurrence';
    - Check that an 'End By' date is there, and that it is not '00';
    - Click OK;
    - Click OK again if warned about exceptions;
    - Cick 'Save & Close'.
    Do this to absolutely all recurring appointments in your Calendar.
    Then do a full resynch (Menu/MfE/Synch Mode/Full Resynch etc).
    I didn't hold much hope of any effect, but Lo!, it did work, and now Emails, Contacts, Tasks, and Calendar all synch fine so far, using Menu/MfE/Mail for Exchange/Options/Synchronise.
    I hope this works for others...let me know if it does.

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • Mail for exchange E63- "system error-try again lat...

    Hi,
    Recently the mail for exchange email on my E63 has stopped working. It used to work, but then suddenly stopped and now says system error-try again later. I've tried all sorts of different connection settings and changing my credentials. I used the settings given from the setting up an iphone from the university.
    I dont know why it suddently wont work. The link to the info i used is below. Thanks for any help anyone can give as this is really bugging me now.
    Sam
    http://workspace.nottingham.ac.uk/display/~cczdas/​How+to+setup+University+email+on+an+iPhone

    More info on this - the  problem appears to relate to only Outlook 2007 and not XP.

  • N97 Mail for exchange - System Error

    Im setting up my profile on Mail for exchange, entered same deatails that is on my n96, I then
    start to sync and it reads..,
    Connecting...
    Connected.
    then a nice useful message that says system error.
    Ive switched phone of, back on still the same issue
    any ideas?

    I have had this issue with my N95. The problem is the architecture of N series phones. My email works seemlessly on an E65, an E63 and other WinMo phones but not on N95 using MfE. This problem occurs usually when the exchange server tries to push security settings like automatic lock. Automatic Lock, is supported by both E and N series, however N series does not take the enforced security from the Exchange server which is what causes the problem. If you try some public exchange server viz. www.mail2web.com, it works fine with N series phones but not managed exchange like in large organizations.

Maybe you are looking for