Mail for Exchange (N9): Need to confirm my own app...

Hi all,
I'm new both to my N9 and to this forum, so forgive me if I ask stupid questions...
I've linked my N9 to my Exchange account via Mail for Exchange. My appointments sync, but when I open an appointment I'm prompted to confirm or deny the appointment as if someone had sent me an appointment request. But these are my own appointments from my own Exchange account - why would I need to confirm them?
Can I somehow set MfE to accept all appointments from this account?
While we're at it: How can I stop birthdays moving around by one or two days?
Many thanks!
N.

I set it up on my N9 the same way as I did on my N900 and it will not connect. I'm using Exchange server 2010 by the way.
I have exactly the same problem. I had a working integration with N900 and our Exchange 2010. There were a few tweaks I needed to do (including rooting the phone to get to modify hosts-file to include non-fqdn alias for our mail server and installing two extra certificates for getting the phone to accept our self-signed server cert. All this works like a champ on N900 and I've gotten pretty far with N9, too: I can now access our Mail for Exchange server (with the N9 web browser,  with HTTPS) using the "non-qualified" domain name and there are no complaints about the self-signed certs, either. So, basically the communication channel should be fine. This was much easier on N9 as you do not have to "root" the phone to get root access, it is available directly from the developer mode.
But what happens is exactly the same as you're seeing: MfE gets no connection with the Exchange server even though everything should be ok. There is, in fact, nothing in the Exchange server logs to help me any further. My collegue suspected that the mail client might need a "deeper" URL to the MfE server (URL pointing further than the root of the server) but MfE client does not accept anything else than the server address (and this was all that was needed for N900).
This really is a kind of showstopper as the MfE is the most important productivity tool for me. I have no reason to believe MfE would not work in some other combo, but seems like I am getting nowhere here.

Similar Messages

  • How can I get Mail for Exchange on my 6720 classic...

    The manual says that Mail for Exchange is pre-installed. Yet, I cannot find it where the manual tells it's supposed to be. I updated to the latest fimware version a couple of months ago. So I cannot remember whether Mail for Exchange has been pre-installed before. At the OVi Store Mail for Exchange is not available for the 6720c.
    How the heck can I get Mail for Exchange on my phone?

    The iWork apps for a Mac and for iOS devices are different, they are different operating systems.
    If your iPad was activated after 1st September 2013 (and you are using the same account that was used to activate the iPad) then you should be able to download the apps for free in its App Store app. If it was activate before that date (or you are not using the same account) then you will need to pay to download the apps.

  • Mail for Exchange - Access Point question

    Hello,
    When setting up Mail for Exchange, you need to input the Access Point.  I cannot find an option to select "Ask for Access Point" or something along that line.
    I use wireless access points and when I go from one spot to another I have to change my settings just to sync.
    Does anyone know of an option, if not how could I file for a feature request?

    The specific problem can be resolved. How did you hard reset your phone? You should hard reset your phone (some key combination which I cannot remember, press four keys simultaneously). Then format mass memory. Reinstall the firmware. Otherwise let Nokia Care reflash your phone. I had issues with freezes when I hung up a call, but that was resolved when Nokia Care reflashed my phone. 
    My phone is currently broken, so I cannot help you further.
    Erik

  • Mail for Exchange Thumbnail Support

    Dear MFE team,
    Exchange 2007 stores the contact's thumbnail image on the server (confirmed, as I can access it from OWA and see the thumbnail).
    Can it be possible to download the thumbnails for contacts when synchronising OTA to Exchange? Given that most people only want to enter data once, having the main repository for such things in Exchange and not on the handset is probably the best option.
    Thanks,
    Dane
    Proud E71-1 owner (yeah!)

    Hi,
    I'm also running sbs 2003, and i have managed to get mail for exchange to work properly.
    i'm not sure me the exact setting to do with the certificates, but there are plenty of posts about this.
    sbs 2003 basically doesn't produce certificates in a recognised format. To solve this problem you need to go to the control panel, add/remove programs, windows components, and add the certificate manager (may not be the exact name), this will allow you to create the correct type me certificate for the phone to recognise.
    copy this new certificate to the phone and it should work find.
    Dave -
    Phones:3110,5110,6110,6210,6310,6310i,8210,8250,8310,6230,6230i,6280,E60,E65, 5800, N900
    and: 7110,6250,6220,6111,7370 (but just for a few months)

  • Mail for Exchange 3.00(50) does not keep the alway...

    I have an issue with the Nokia Mail for Exchange client version 3.00(50) where the always on connection it is supposed to maintain with the server gets dropped.
    I have also encountered this issue with a previous version of the client 2.9.158.
    When this occurs the current status of the Mail for Exchange client reads: "Unable to connect. Retrying.
    The client then connects and performs a sync every 15 mins and then disconnects immediately when done.  This 15 min cycle repeats, so the phone is not always online, but instead runs on 15min intervals. 
    The Mail for Exchange log shows the following:
    24/05/2010 09:42:03 Cancel Job:0, Type:"PING Job- Always-Online":
    24/05/2010 09:42:06 start E-mail sync
    24/05/2010 09:42:06 client->server adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:06 server->client adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:06 end Email sync
    24/05/2010 09:42:06 start Sent Items sync
    24/05/2010 09:42:07 client->server adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:07 server->client adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:07 end User sync
    24/05/2010 09:42:07 PING Command Requested
    24/05/2010 09:42:08 start E-mail sync
    24/05/2010 09:42:09 client->server adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:09 server->client adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:09 end Email sync
    24/05/2010 09:42:09 start Sent Items sync
    24/05/2010 09:42:09 client->server adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:09 server->client adds=0 changes=0 deletes=0 fails=0
    24/05/2010 09:42:09 end User sync
    24/05/2010 09:42:09 Starting a New Ping
    24/05/2010 09:48:41 Exception during Ping.
    24/05/2010 09:48:41 New heartbeat = 4.
    24/05/2010 09:48:41 HTTP Server Error 408 : Request Timeout
    24/05/2010 09:48:41 Starting a New Ping
    24/05/2010 09:52:48 Heartbeat expired. Re-issuing ping.
    24/05/2010 09:52:48 New heartbeat = 6.
    24/05/2010 09:52:48 start Email sync
    24/05/2010 09:52:48 Nothing to sync
    24/05/2010 09:52:48 end Email sync
    24/05/2010 09:52:48 start User sync
    24/05/2010 09:52:48 Nothing to sync
    24/05/2010 09:52:48 end User sync
    24/05/2010 09:52:48 Starting a New Ping
    24/05/2010 09:59:19 Exception during Ping.
    24/05/2010 09:59:19 New heartbeat = 4.
    24/05/2010 09:59:19 HTTP Server Error 408 : Request Timeout
    24/05/2010 09:59:19 Starting a New Ping
    24/05/2010 10:03:24 Heartbeat expired. Re-issuing ping.
    24/05/2010 10:03:24 Error occurred during Ping.
    24/05/2010 10:03:24 Exception during Ping.
    24/05/2010 10:03:24 Mail For Exchange Error -15051
    24/05/2010 10:03:24 Set SimulateAlwaysOn mode : 1
    24/05/2010 10:04:56 PeakTime active
    24/05/2010 10:05:56 start E-mail sync
    24/05/2010 10:05:56 client->server adds=0 changes=0 deletes=0 fails=0
    24/05/2010 10:05:56 server->client adds=0 changes=0 deletes=0 fails=0
    24/05/2010 10:05:56 end Email sync
    24/05/2010 10:05:56 start Sent Items sync
    24/05/2010 10:05:57 client->server adds=0 changes=0 deletes=0 fails=0
    24/05/2010 10:05:57 server->client adds=0 changes=0 deletes=0 fails=0
    24/05/2010 10:05:57 end User sync
    Does anybody know where the HTTP 408 error comes from as I don't believe it comes from the server?
    Also can anybody give a reason why the ping is not working and if there is a work around for it?
    What is the meaning of the MfE error 15051?

    Hi, I am afraid I cannot answer your specific question about the pings / error.  I can confirm I have the same problem on my E71, running the latest firmware 410.21.010 and MFE 3.00.050.
    I did some searching and this seems a common fault with 3.00.  Apparently it didnt happen in version 2.7.  I got a version 2.7 and tried for a few hours without problem but didnt do an extensive test as 2.7 doesnt support folders which I need.
    The always on connection does appear to work for a while following a reboot but frustrating as hell when it stops because as you say it then only updates every 15 minutes.

  • Deleting Mail For Exchange Account from Symbian^3

    Since buying my C7, I have been playing with the email settings to try and set up the correct account information that works best for my phone. In doing so I have tried both imap and mail for exchange. In the end I plumped for GMAIL imap and deleted all other accounts. Recently I have needed to set up a mail for exchange account again and when I tried to create a new account it confirmed that I could only set up one such account and that I should delete the other.
    I looked at my account list but there was only my IMAP Gmail account. I tried switching the phone off and then on again and the email app then confirmed that there was a mail for exchange account. When I tried to view the account settings or make changes it confirmed that it was not possible to access the account at this time. 
    I tried deleting the account but although it lets me do this, when I try to add a new mail for exchange account I get the same message as per above and the account is recreated when I next switch off / on?
    Does anyone know how I can resolve this......or will I need to factory reset?
    Solved!
    Go to Solution.

    I have managed to sort this now. Obviously one of my previous mail for exchange settings had become corrupted and could then not be updated. To fix the problem I downloaded the Nokia configurator tool (available on the downloads section of this site) and got it to read my settings on the phone. I then unticked everything apart from the mail for exchange settings and manually entered them in the tool. I then sent these settings back to the phone and rebooted the phone. The mail for exchange account then appeared although strangely none of the settings I entered had been sent, but I could then edit the account and get it working. I then deleted the account again on the phone and this completed successfully and would allow me to re-add......phew.
    I just need PR1.2 so that I can use mail for exchange lol.

  • Mail for exchange settings on N97

    I have a N97 which mail for exchange was working happily on, synchronizing mail, contact's and calendar. The world was a good place!
    The screen broke and  needed replacing on my N97 and  I have set up mail for exchange again. Now when it downloads mail, it downloads all of the other outlook folders inside my inbox as well as my inbox. It never used to do this and indeed this is not what I want.
    How can I get my N97 to just download the inbox rather than all of the folders within the inbox on outlook. There must be some settings either on the phone or in outlook which defines what is synced.

    Maybe you had earlier Mail for Exchange v2.9 in use and after setting it up again, you have got the latest MfE 3.0 version. The new MfE 3.0 version has as a new feature the possibility to view the outlook subfolders. These are, however, not automatically synced unless you subscribe to them. The unsubscribed folders show the mark (x) in front of the folder name. After you subscribe to a folder, the (x) mark will disappear from the folder name.

  • Mail For Exchange - Compatability/Downloads menu i...

    Using N79
    SW 31.002.205.4.
    Up until this morning running MfE 2.9.158. Just been offerred 2.9.160 via App.Update. Post install check indicates this has been available for months - why the delay in pushing it through to App.Update?
    MfE 2.9.160 still not fixed old issue of being unable to open MfE settings following phone restart - why not? - threads dating back to 1st quarter 2009! but this one explains the issue precisely:
    /t5/Messaging-Email-and-Browsing/Mail-for-Exchange-corrupted/m-p/603626/highlight/true#M21922
    It's the only app on my phone that cannot be routinely opened - not good.
    Notwithstanding this idiosyncrasy email syncing is more hit than miss but  falls way short of my iPod touch which is 100% rock solid regarding Exchange compatability. Does Nokia want Exchange Server based customers- my guess is not enough. Generally speaking if I notice emails hitting my iPod but not my N79 it's time for a  phone restart.  But that  kills the ability to open MfE settings So it's back to a re-install.
    If the above isn't bad enough Nokia has just made it worse.  This "current" link from the N79 support page is dead;
    http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
    and after much dead-ending find that the Ovi Store now contains MfE - no problem with that it makes sense to consolidate. But no mention of N79 being supported by the latest greatest MfE and Ovi only lists 3.0 as supporting FP1 phones - so wht about FP2?
    Is my N series phone supported anymore - I've got no idea.
    Wake up Nokia it's 2010 not 1990 - we shouldn't have to put  up with this **bleep** in basic functionality.
    Judging by lack of action over the past 12 months have no hope Nokia will put this right but that my dear Nokia is how you lose customers to your rivals Apple and RIM. Pull your finger out.

    I'm hoping this fix works for me long term and post as is.
    Multiple phone calls to Nokia Tier 1 and 2 phone support heavily supplemented by some determined Google searching led me to the following solution.
    First off the bad news. To fix the MfE issue requires a hard reset of the device. There's no way around this so resign yourself to it early.
    The good news however is you can dramatically reduce the time needed to return your device back to its pre-reset condition by backing up your device using Ovi Suite. Forget to do this and you'll be re-installing your apps one at a time.
    My issue was made more difficult because the usual hard re-set code (*#7370 #) would not reset the device i.e. full recovery of phone memory, complete wiping of contacts etc. Ignoring Nokia's advice to return the phone for repair! I turned up an alternative method which achieved the hard re-set I was seeking.
    As follows:
    Hold these three keys down - *, 3 and green accept call - whie the phone is off, then power on keeping them depressed until the Nokia logo plays.
    On the N79 this involves an usual amount of manual dexterity but nevertheless worked where the re-set code failed. Hopefully this won't be necessary for most users.
    Once re-set you will be presented with the Set up menu as per a new phone.
    With a fully recovered phone memory you can now restore your earlier backup via Ovi Suite, which for me did 90% of the work needed to get my phone back to its earlier personalised condition. I took the opportunity of checking for any programme updates of essential apps and updated as necessary. Re-installation of Speed Dial settings and permitted Bluetooth devices amongst other items was required but all in all all my data and file structure was faithfully restored first time around.
    I am now running MfE 3.0 (actually 2.09.208 - see initial thread posting ) which Nokia support advise is not supported  for the N79 -  given the varying level of advice received I'm prepared to run with my own view that it works fine. If you wish to play safe you should be running 2.9.160.
    I have re-booted the phone multiples times over the last two days and on only one occasion (which I'm going to pretend never happened) MfE has been rock solid. In addition Ovi Maps which had stopped opening - and was fundamentally what set me off down the road of a hard re-set - is now working perfectly.
    I'm hoping this cures the irritating MfE problem long term pending Nokia sorting out whether they even support the N79 any longer as far as MfE is concerned.
    As a sign off I will just say for my purposes the N79 is the best smartphone I've ever owned and supplemented with an iPod Touch is a fantastic work/play combination. If you are allowed tethering on your contract I contend Walking Hot Spot is THE killer app and so confident am I of my choice of phone I've just bought a second N79, at a much reduced price, which I'm going to use as a backup/extension to my existing N79 when it dies and goes to heaven.
    Hope this post saves someone else some timeand effort.

  • Problem with mail for exchange after update on E72...

    Hi everyone,
      I updated Nokia E-mail to ver 3.9 on E72. Now I am facing  a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
    Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
    Can anybody suggest a way out.
    Thanks
    Anil

    It could be a problem if you're using your network's connections...
    I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
    Could be worth checking with them to make sure it's supported.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • N9 after PR 1.2 update - Mail for Exchange is sync...

    I have a problem with my N9 Meego after 1.2 update. I have mail for exchange account talking with exchange 2010 server and sync works just just fine with calendar and e-mail. Contacts on otherhand doens`t work. It says its bringing contact like 78 from mail for exchange but when its done you can`t see any.
    i have done my account again many times but still contacts aren`t working. Should I do some hardreset but does that uninstall PR 1.2 update?
    Help is needed or any ideas what could be done?
    -mika

    Hey mate,  As far as I am aware there is no going back from PR 1.2, so you could try hardreset without concern of loosing this update.  Keep in mind you are likely to lose data, so make sure you back it up first.
    I am sure of this, as I have tried to go back to PR 1.1 to get my mail exchange to work and even with trying to flash the device "downgrade disallowed" comes up and prevents me getting rid of the PR 1.2
    You are luckier than me, I can't get mail, calender or contacts.  I am so annoyed that I accepted the update.  I am hoping that Nokia take note of this and fix the mail exchange in a new update

  • How to configure Mail for exchange to select autom...

    I have an E71 with a corporate Mail for Exchange mailbox, the menu allow me to configure the connection Access point manually only. So, by default I select the G3 cell phone connection, but while I'm at home the nokia E71 onnects to my DSL wifi connection but Mail For Exchange cannot switch automatically to it ?
    is there a way to configure that automatically ? switching from low cost connectivity access point automatically when repliacting with the exchange server ?
    I'm running with Mail for Exchange version 2.09.158
    Many thanks in advance

    There is no default for those entries. you need to set it up manually by using the custom label.

  • Is the N97 Mail for Exchange or MfE 'provisionable...

    Background info:  I used to carry two phones, the N95 and the E51.  Before MfE 2.0 came out, MfE was not installable on the N95 (or any N series phones).  So I bought the E51 so that I can use MfE to have my corporate mail pushed to me.  Today, I'm the proud owner of the N97, with MfE 2.9.176 installed.  No more carrying 2 phones, and everything is synchronizing just fine.
    Last week, my company announced a new policy regarding mobile devices.  Soon, they will enforce new security policies as available in Exchange 2003 SP2.   This really got me worried, because I spent quite a lot of money in investing in the N97!
    We all know that Nokia states that only the E series devices fully support all security policies of Exchange servers.  (Nokia calls this 'provisionable' versus 'non-provisionable' devices.)  But here's the kicker.  In the Mail for Exchange Guide for Administrators (http://nds1.nokia.com/phones/files/guides/MfE_admin_guide_140709.pdf), in chapter 2, section 2, part 1 titled "Are your devices 'provisionable'?", it states the following:
    Eseries devices are provisionable
    Nseries devices previous to S60 3.0 Feature Pack 2 (FP2) are not provisionable
    Nseries devices after S60 3.0 FP2 may be provisionable
    Supported devices not designated Eseries or Nseries may or may not be provisionable.
    Well, that is kind of some good news.  But it left out key information regarding my N97, specifically S60 5.0.  Does anyone know if the N97 can be categorized together with those Nseries devices "after 3.0 FP2"?  Or can anyone identify specifically what security policies/features are provisionable in the N97 device?  This is important because I need to make the case with the IT management to put me in the exception list, if at all possible.  But I don't want to stir up anything until I know exactly what can or cannot be done with the N97.  This will be greatly appreciated.  Thank you very much.
    John
    John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

    Not only is Nokia's myriad of different web sites each requiring its own login credentials, they also have a myriad of places to go get software.  I have always thought that http://www.businesssoftware.nokia.com will have all the latest enterprise software coming from Nokia, but no, that is not the case.  It turns out that http://europe.nokia.com/get-support-and-software/download-software/mail-for-exchange is the place to get the latest version.  Just select your device, and it'll give you the download link for the latest.
    Just so you know, even http://www.businesssoftware.nokia.com doesn't have N97 listed as a device yet.
    I really hope Nokia takes this consistency issue seriously just like how they're working on the consolidation of logins...
    John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

  • E52: Mail for Exchange complains about low memory

    Hello,
    we've just gotten two Nokia E52 phones for our company to use as mobile MS Exchange clients.
    We've been using the E51 for the past two years without any major problems.
    After just one day of use however, we've already run into memory problems with both E52s.
    Mail for Exchange constantly complains that the internal memory is full and subsequently stops synchronizing with out Exchange 2010 server.
    According to the File manager, there are indeed only about 2 MB of internal storage left.
    Not that 60 MB internal storage are anything to write home about...but I didn't expect to run out of memory so quickly.
    Both phones are also equipped with an internal 4 GB miniSDHC card. Is it possible to let MFE use the SDHC card as it's primary storage? 
    Is there anything else I could try? 
    Both phones are running the latest firmware 051.018.
    Thanks in advance!

    You need to make Exchange save the messages onto the memory card instead of the built-in memory. Go to HomeMenu:Messaging. Then select Optionsther:MemoryInUse and select MemoryCard. Now all of your messages will be stored on the memory card instead of built-in memory.

  • Download Mail for Exchange app E6-00

    I want to download the Mail for Exchange app on my E6-00, but received a message that this app is not available for this model. I've read comments from people who were able to install it on their E6-00, so I was wondering if someone could guide me from the start.
    Many thanks!

    You can find everything about the features of Mail for Exchange and how to use it from this link. You need to get the domain name from you company IT administrator. If you don't have a Microsoft Exchange account, you can just use Nokia Messaging (normal email accounts). If you accept the terms and conditions of Nokia Messaging when creating a mailbox, the device will automatically use it. You can manage your account settings in here.
    Hope this helped!
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • E71x Mail for Exchange search or find

    Hello,
    I just moved from a Windows Mobile device to the e71x and can't seem to figure out how to search for or find an e-mail within Mail for Exchange. Is this even possible? If not, are there 3rd. party apps that would let me?

    prateekkhanna wrote:
    I need subfolder support in my exchange client so was really waiting for this update. Unfortunately, when I download the files from ovi store it says installation failed. I also tried to manually install (I was able to get the file on PC somehow) but the mobile says that the software is not compatible. I am using e71x. If someone has the correct 3.XX version of mfe please share it with me. Thanks.
    Are you sure your carrier suppports this feature?
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Maybe you are looking for

  • My Mac can't find Airport!

    I've done a factory reset on my Airport Express, after which my computer can find it. I only want to use it for Airtunes and printing, so I set it up to connect with my Livebox (Orange internet connection: UK). It then restarts after which my compute

  • Data Cleansing

    Hi, In my company there are duplicate vendors created under multiple company codes. Is there any process or tool that is available to check for the duplicate records and then mark them for deletion. If it is a process could you list them for me. Than

  • OPMN.XML - strange caracters after lauching the Iasconsole

    Hello all, Something very strange started to happen and I cant see why :( When I launch the IAs console the file opmn.xml is changed by the application and some strange caracters show up in the file. example: caracters like "â" "m": <data id="java-op

  • How to hide full name when publishing photos to icloud's public website?

    When allowing iPhoto to publish photos to iCloud (Public Website, allow anyone to view this photo stream at:..." my full Name (xxx by xxx) is always displayed when opening the link. Does anyone know how to hide or change the name displayed?

  • Data appear in ??????? format

    Dears,, We are working on Oracle Database 10.2.0.4.0 64-bit under UNIX O.S and i am trying to select data but this data appear in " ??? ". It seems to be problem in language I tried to check nls_language as below SQL> show parameter nls_language NAME