Mail goes offline after waking from sleep

Every time I put my Macbook Pro to sleep, upon rewaking the mail app cannot connect to my mail server? however on restarting the mail app it all works fine? any ideas?

Just started having this problem on my new MacBook Pro Retina, which had Mountain Lion pre-installed. If the computer sleeps and then I resume, all my mail accounts are offline and absolutely nothing will take them back online. I've actually had to resort to restarting my computer, not even logging out and then in corrects the issue - INCREDIBLY FRUSTRATING!

Similar Messages

Mail app frozen after waking from sleep

I have Yosemite 10.10.3 (Public Beta). Every time my Macbook Air wakes from sleep, the mail app is locked up with the spinning beach ball. I have to force quit the app and restart Mail. This has been happening since 10.10 I believe. I have of course restarted my MB many times but the problem continues to consistently occur when waking from sleep. Curious if anyone else has run into this and if they found a fix.

I reinstalled Yosemite and it fixed the problem briefly even after the updates were applied. But now it is back to freezing every time it wakes from sleep. I am now on 10.10.4 and still having the problem.

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this?

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --

Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

Anyone's MacPro have problems after waking from sleep mode?

After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

Network connection after waking from sleep

Hi... More or less any time I allow my MacBook Pro to go to sleep, when I wake it up I am nearly always disconnected from my Airport connection (I connect to a NetGear wireless router via my internal Airport card). I go up to the menu bar and click on the now grey airport icon and I do still see my network in the list of available networks. I click on it, after several seconds a message comes up that says "there was an error joining the Airport network "network name""... But I then simply click on OK (rather than Try Again, I've learned that by trial and error) and the network reconnects just fine... Then when I let the machine sleep again at some later time, I do that all again... Any suggestions of what might be going on??? I do have "Use Interference Robustness" turned on (not that I know why exactly) but I've also had it off before and that seems not to matter... Any suggestions??? thanks... bob..
FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.8)

I have "join preferred networks" selected, and mine os the only one on the list, and it still does not connect after waking from sleep. It is WEP security, not WPA2. I checked out the following article, but it was of no help:
http://docs.info.apple.com/article.html?artnum=304482

Logic Pro X inaccessible after waking from sleep when using an MCU Control Surface

I'm having a problem I cannot seem to get around without force quitting Logic every time. If I have a Control Surface setup as a Mackie Control (v1.0); and if the computer goes to sleep, and then i turn off the controller while the computer is asleep (for any reason), and then wake the computer without turning on the controller first, Logic becomes completely unusable and must be force quit.
My controller in this example is Solid State Logic's Nucleus controller, however it happens with other Mackie Control compatible controllers (i have another one i tested against), BUT not a real Mackie Controller sold by Mackie (i tested with that as well); more details below.
For the SSL controller, Logic automatically sets it up like this:
Now if the computer goes to sleep, and i wake it up, i get the following dialog, which is fine:
After clicking on "Continue" button or hitting the enter key, Logic is rendered useless, as if there is a modal dialog still open somewhere. Clicking anywhere on the gui results in white flashes and nothing else. doing cmd+Q to quit actually makes it try to quit (a save dialog appears), but it never does successfully quit, making me resort to force-quitting. For an example, here's a pic of the file menu at this point:
I also have a regular Mackie Control Unit (MCU Pro) and the strange thing is with that unit, everything works fine after sleep, turning off controller, and re-awakening. However, there is a difference in what kind of dialog is displayed after the sleep, which probably has something to do with this issue.
Here is the setup screen of the MCU Pro:
And here is the dialog for the missing ports after waking from sleep:
This dialog is completely different than the other control surface's missing ports dialog. When clicking on "Keep unassigned" here, Logic resumes working fine.
The project is as minimal as possible; nothing is loaded, all that's there is an empty instrument track and a Control Surface configured.
I'm using a Mac Mini (late 2012)
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.4 (13E28)
with Logic Pro X 10.0.7
Any help would be greatly appreciated!!

Did you ever figure out a solution to this problem?
I just pulled out my original Emagic Logic Control (MIDI) and I have having the same problem.

After upgrading to Tiger, freeze after waking from sleep on PM G4

My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
When I installed Tiger, I used the 'archive' option.
My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
I also see an error in the system.log which may reveal what is going on:
Nov 20 18:54:40 localhost kernel[0]: standard
timeslicing quantum is 10000 us
Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
2005 11: 46:54)[44]: starting
Nov 20 18:54:40 localhost kernel[0]:
vmpagebootstrap: 284852 free pages
Nov 20 18:54:40 localhost kernel[0]:
migtable_maxdispl = 70
Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
modules
Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
1982, 1986, 1989, 1991, 1993
Nov 20 18:54:40 localhost kernel[0]: The Regents of
the University of California. All rights reserved.
Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
headers and 2949 cluster IO buffer headers
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
9 already taken
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
AppleUSBOHCI[0x2057000]::start OHCI controller will be
unloaded across sleep
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
TI ID 8019 built-in now active, GUID 000a27ff
feb38fe6; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
VendorID 1033 ID cd PCI now active, GUID 0000303c
0008c32e; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: Security auditing
service present
Nov 20 18:54:40 localhost kernel[0]: BSM auditing
present
Nov 20 18:54:40 localhost kernel[0]: disabled
Nov 20 18:54:40 localhost kernel[0]: rooting via
boot-uuid from /chosen:
474ACE52-2523-3EE7-9C54-DDC3734C7922
Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Nov 20 18:54:40 localhost kernel[0]: Got boot device =
IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
Nov 20 18:54:40 localhost kernel[0]: BSD root:
disk0s10, major 14, minor 10
Nov 20 18:54:40 localhost kernel[0]: jnl:
replay_journal: from: 2668032 to: 12288 (joffset
0xe04000)
Nov 20 18:54:40 localhost kernel[0]: Jettisoning
kernel linker.
Nov 20 18:54:40 localhost kernel[0]: Resetting
IOCatalogue.
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 2
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
loaded and registered.
Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
filtering initialized, default to accept, logging
disabled
Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
Ethernet address 00:0a:27:b3:8f:e6
Nov 20 18:54:41 localhost launchd: Server 292f in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
abnormally: Hangup
Nov 20 18:54:41 localhost lookupd[56]: lookupd
(version 365) starting - Sun Nov 20 18:54:41 2005
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk0s10 hfs
474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
Nov 20 18:54:41 localhost kernel[0]: jnl:
replay_journal: from: 1374208 to: 1564160 (joffset
0x624000)
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk1s10 hfs
947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
/Volumes/Backup
Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
[98000000:08000000]
Nov 20 18:54:43 localhost
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
Login Window Application Started
Nov 20 18:54:43 localhost loginwindow[72]: Login
Window Started Security Agent
Nov 20 18:54:44 localhost mDNSResponder: Adding browse
domain local.
Nov 20 18:54:45 localhost kernel[0]:
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
Full Duplex
Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
setting hostname to "Jason-Radtkes-Computer.local"
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
executing
/System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
posting notification
com.apple.system.config.network_change
Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
lookupd (version 365) starting - Sun Nov 20 18:54:47
2005
Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
target=enable-network: disabled
I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
Thanks in advance for your help.

Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
Ron

After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.

After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.
This has happened EVERY time the iMac goes to sleep for the last few days.. the only way I have found to resolve the issue is to manually restart the computer each time via the button on the back of the iMac.
Any and all help is appreciated!
Thanks

FWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.

IMac loses WiFi connection after waking from sleep on OSX 10.8.2

Bought a new mid-2011 21.5 inch IMac this week. It is not re-establishing WiFi connection after waking from sleep. Was happening on OSX 10.7 that it came with, so updated to 10.8.2 and same problem exists.
I am running a mid 2012 MacBook Pro with Retina Display alongside, on OSX 10.8.2 and no problems at all. Cannot work out what is causing the IMac to fail and neither can Apple!
Could it be the Netgear Wireless Router 3 years old? Full signal strength!

Me too!
I am on a MAC Pro desktop and I am having the same issues. I go to system preferences and just click the network icon. Then I close mail and when it opens it now sees the network. This is getting very annnoying.

Odd Keyboard/mouse failure after waking from sleep

Here's an odd problem that's been bugging me for awhile now.
Occasionally my iMac will not allow me to log in after waking from sleep. I always log out of the machine when I'm not using it, and after a bit it goes to sleep (usually I'll just click the "sleep" button on the login display).
It wakes up with a wiggle of the mouse (Wacom Graphire), a tap of the keyboard (recent wired but numeric-keypadless Apple) or if I hit the button on my Griffin Power Mate.
But then I cannot do anything. If I click any of the edit boxes in the login window, or any of the buttons, the mouse jumps to the "sleep" button but does not click it. I can't enter a username or password because those edit boxes never get focus.
The machine is otherwise alive, as I can ssh to it from another computer or my iPhone and then from the command-line do a
$ sudo /sbin/shutdown -r now
for an orderly reboot.
Very bizarre and rather annoying ... this has persisted since I installed Snow Leopard. Clues, anyone?

Some, but not all of the time that the tower goes to sleep, when it wakes up the mouse works, but the keyboard does not. A restart solves the problem, but that's not practical.
My aluminum keyboard did exactly the same thing when used with the USB extension cable, but not when plugged directly to the computer. Usually, unplugging the keyboard for a few seconds would fix it. The Apple store replaced the keyboard, and I have had no problems with the new keyboard.

Apps are switched after waking from sleep

When I close the lid, my MacBook Air goes to sleep, and when I open the lid again, it wakes from sleep. But it also switches apps after waking from sleep. Is there anything I can do to prevent this from happening?
This has been discussed earlier, but the proposed solution (changing System Preferences > Security & Privacy > General > Require Password x minutes after sleep) only fixed it temporarily. The symptom reappeared after a short while (after the first restart, I think, but I'm not sure).
I noticed that the problem does not appear in a new user. It only appears in a user account I moved and upgraded across a couple of Macs and OS X updates. Is there anything I can do short of creating a new user account?

FWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.

Screen appears dimmer after waking from sleep

Hi
Recently, I've noticed the brightness of the 24" screen is dimmer after waking from sleep, regardless of the brightness setting in the Display preferences. If I restart the computer, the regular brightness returns. Curious if anyone else is seeing this happen on their Aluminum iMac?

This is normal. As already stated, after waking from Sleep, your screen gradually intensifies brightness until it reaches its full brightness setting. Sort of how GE Soft White Bulbs take a couple of minutes to warm up to achieve their final Lumens.
The reason it's instantly Bright upon Restart is that the machine goes through an initialization upon bootup where it performs a complete system check and ensures all settings are initialized and set according to your preferences. When Sleep is enabled (something I RARELY ever do) the machine lowers all operational parameters and upon waking, it slowly gets back up to speed.
Just like how putting drives to sleep causes severe lag once woken up before you can perform all functions at full speed.
Activating your screen saver is the best option.

Disk drive thrashing after waking from sleep

Apple conundrum - iMac goes from sleepy to grumpy....
At times after waking from sleep mode, my disk drive thrashes for up to 3-5 minutes. The thrashing almost always includes an SSBOD. Then it stops and things seem fine. My iMac is not backing up as I check for the TIme Machine icon activity. I have also checked and disk permissions and keychain ae fine.
Any ideas on what is causing the disk thrashing.... and how to fix it.
Thanks
Bruce

To find out what the Mac is getting grumpy about, open your Activity and check to see what it's doing those first few minutes.
See > Using your Activity Monitor

Sound problem after waking from sleep

When I wake my computer from sleep the external speakers to do not produce sound. This is not related to the 'red light' issue, no red light is shining and in the sound control panel 'internal speakers' is showing.
Interesting is that when I play with the alert sounds in the control panel I can hear them, but when I adjust the volume or try to get sound out of software (iTunes, Quicktime, etc.) I can not hear anything. Also, when the computer is waking from sleep if I quickly toggle the volume control I get one or two 'clicks' before it goes silent. I have repaired the permissions according to other posts but that did not help.
However, if I plug in earphones and take them out again the volume works. . .
any suggestions?

Todd Sackett wrote:
Hi everyone, after waking from sleep, the first sound that is played is accompanied by a hissing sound for the first couple seconds. It does not happen after that at all that I have noticed. It comes out of either the speakers or headphones.
Can anyone try this: (Esp. if you have a new MB Penryn update (most recent))
1) Close lid, put to sleep.
2) Wait 5-10 mins
3) Open lid, log in to iChat (with login sound on) or make some other sound play. Listen for a hissing or static sound within the first couple seconds of whatever you just played.
Thanks for any help!
I don't observe this on my Napa-Revised Macbook

Losing WiFi connection after waking from sleep

I've iMac 27 in. with recently upgraded OS X Lion to 10.7.4. After this was done the problems strated with connecting to Wi-Fi through my Time Capsule (2TB, 802.11n 4th Gen) after waking from sleep. Everything works fine when iMac is started after shutdown. My internet router is connected through ethernet cable to Time Capsule and iMac is using Wi-Fi connection with Time Capsule.
I've tried to install iMac Wi-Fi update v1.0 but it I cann't do it because my OS X is 10.7.4 and the update installer is stopping the installation after the check of my OS version.
Could anybody help to solve this problem, please?

but when the
computer goes to sleep and is then awakened, there
are no wireless networks listed in chooser... like
there are no wireless networks available...
Hi greaser5!
That is definitely NOT typical operation. Yes, your Core Duo iMac must restart after sleep, but It should reconnect to a working network instantaneously (less than a second), although it will probably take longer than that for your iMac to fully restart after sleep and actually be able to use the network.
Delete all prior wireless configurations that you have saved on the "Location:" selector of the Network panel of System Preferences. On the Network>AirPort>AirPort panel also delete all your preferred wireless networks. Click the "Apply Now" button.
Restart your Mac. Turn on AirPort. Use the Network panel's "Assist me..." button and the following blue "Assistant..." button to configure a fresh wireless connection to your working wireless network. This will be fresh and total, just as you did when your iMac was new. There is no need to give your network either a new name or a new password, as the old ones will work just fine in the new configuration, since as you know, the current network is working fine, the iMac simply can no longer connect to it correctly using its current configuration.
I have not been able to test the above on a Core 2 Duo, so do not know first hand if it will make any difference on those iMacs, but that or some similar fiddling should resolve the issue.

Mail goes offline after waking from sleep

Similar Messages

Maybe you are looking for