Mail having more than one notification for each mail received

ever since I've upgraded to Yosomite X from Mavericks the Mail built in app is been acting weird. As Soon As it is connected to the internet the Mail Application collects emails n i keep on getting notifications at the top right bar for each single mail i would get minimum two notifications if not four or three. Am getting annoyed by this issue especially if ur waiting for an email n hyped about it i would be disappointed lol.
Plz if anyone has a solution for this offer you're help and it is well appreciated.

Mail preferences under Compose tab. Set which account to send mail from, or set it to use the highlighted account.
You might also verify in Mail preferences under Accounts, that each account has it's own SMTP server. Be sure the correct one shows for each account. I would also check the box to use only that server for that account, which will insure that the correct server and only that server will be used for the account. Otherwise if the SMTP server for the sending account fails, it will just switch to another account's server.

Similar Messages

  • Logical table having more than one Logical table sources

    Hi ,
    Is it possible a logical table has 2 logical table sources and there is no join between the underlying table of logical table sources?
    What will happen if we create the request which contains one attribute from each source?
    Will BI server return records with Cartesian join?
    Is it mandatory if logical table is having more than one logical table sources(exp. Logical table sources are X,Y and underlying table is A,B respectively),
    The underlying tables (A&B) must be joined ?
    Can someone explain the logic behind the logical table sources? How does it work?
    Any reference of document will be appreciable.
    Thanks,Ashish

    Hi Stijn,
    Thanks for response.
    You are saying that Oracle BI server will run a query against both tables and combine the results. But if there is no possibilty of any type of join, how BI server will combine the results from both tables.
    I have a scenario like below -
    Suppose i have 2 tables A and B at physical layer. Both table contains the information of any common subject area.
    But there is no attribute is common between A and B so not any kind of join possible between two.
    Now if i create a logical table with 2 logical table source A and B and create any request having one column from A and one from B ,
    What will happen? How BI server will combine the result? Will BI server not result records after Cartesian join.
    How can i model this scenario?

  • Creating more than one account for a single user

    I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
    Thanks for all the help! It feels good to be a part of the goodguys team =)
    Thanks again!

    Ghost,
    First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
    On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
    In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
    Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
    That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
    If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
    Scott

  • Outlook (ex Hotmail) on iPhone refuses to send e-mail to more than one person

    Hi,
    I have two questions today...
    When I try to send an e-mail to more than one person from my @outlook.com address on my iPhone it fails everytime and a message pops up that it could not connect to the server. Sending e-mails to one person at a time works perfectly. I think this is a Microsoft issue as I had to verify that I was "human" before I could send a test e-mail to more than one person while logged into the Outlook website on my PC. I never had problems like this on my old Gmail and Ymail accounts. Any ideas how to fix this?
    Alternatively, I can use my @icloud.com e-mail address, but this leads to my second question. Apple states that I cannot use my iCloud e-mail address as my Apple ID. I do however not want to keep two mailboxes. Can any e-mails Apple send me (eg. receipts for purchases, etc) be sent to my iCloud address? I'll can then just keep the other e-mail address just for the Apple ID but do not have to monitor it. It this can be done please advise where I can change this.
    Any advice will be greatly appreciated.

    Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
    To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

  • Startup issue when having more than one database on machine

    Startup issue when having more than one database on machine:
    I’ve installed two databases.
    When I shutdown one of the database and try to start it up using
    Startup pfile=’…location..’;
    I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
    when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
    Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
    I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
    I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
    Anyone know how to get this working, i.e. starting and stopping DB without issues?
    Using oracle 11gR2 on Windows 7 64bit, all is working normal.
    Thanks,
    Ayman
    Edited by: aymanzone on Jun 15, 2011 9:27 AM

    aymanzone wrote:
    my oracle_sid is set to the name of one of my databases
    echo %oracle_sid%
    shows me the name of my first database.
    Still not working though.
    When I start the services of both databases using Services, I can connect and run queries from both of the database.
    Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
    Next ... from the command prompt:
    set oracle_sid=<Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
    From the same command prompt session or other ....
    set oracle_sid=<Other_Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Edited by: Srikanth on Jun 16, 2011 12:27 AM

  • DMEE :More than one invoice for a vendor payment

    Hello Experts,
    I'm trying to create a file for payments to vendors  through transaction DMEE.
    I've create a new structure in DMEE, tree PAYM where given pace for atleast 4 invoices with semicloumn.
    but when I'm runing the payment run for more than one invoice for the same vendor, the file only shows the first one with repeation and filling all structurewith only 1st invoice.
    Issue is when payment run for a vendor for more than one invoices, only the first invoice has shown in the file.
    Sturcture of the file  coming after payment run is filled like this , pasting below for your referance.
    000000016000.0020080310             12025000003958560010000710200713      0072394000Spoerle Electronic Kft          HU010               INV.123452345434 ;INV.123452345434 ;INV.123452345434                000066                   
    INV.123452345434 is the 1st invoice.....whcih is entering one after the other instead of 2nd / 3rd invoice.
    Could you please help me?
    Thanks in advance!
    Nupur

    hi,
    i am also having same requirement.
    i have to send the payment advice details to the bank.
    for that i planned to create the settings in the DMEE.
    so plz send the steps which you are created for your requirement
    thanks ,
    Ramu

  • More than one DataSource for CMP

    Hi everyone,
    is it possible to define more than one DataSource for CMP?
    Best regards,
    Ira

    Hi all,
    is it possible to specify more than one DataSource
    for CMP? No, but you can try to deploy you'r CMP beans twice. One EJB module per each database.

  • Can I have more than one ID for my iPad

    Can I use more than one ID for my iPad, iPhone and iPod.? I am using the same for all 3 now.
    My wife have one iPod and can I share my apps with her.? And if...How?
    We are using the same computor for all devices.
    Thanks in advance....
    Best regards.....Reidar45

    The spell check goes with the keyboard layout being used.  Just activate both English and French in Settings > General > Keyboard and then use the Globe key to switch between them.
    (I think there is bug in Pages, however, so that this doesn't work for that -- you have to change the OS language).

  • Can i create more than one instance for single database?

    HI
    anybody can tell me how to create more than one instance for single database(without using RAC)?
    thanks
    Kalanidhi

    Anandji,
    I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
    The main doubt of mine is that we create multiple instances accessing the same storage area.
    Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
    Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
    Why can't the same files be shared between the two instances in a same system ?
    I know I am thinking a little bit confusing...
    Anyway I need to test that also...
    Mahesh.

  • How to pass more than one value for one column in procedure

    hi
    select id, name from col_tab where dept_name in ('ECE','CIVIL');
    when i was running this it is working well.
    CREATE OR REPLACE PACKAGE pack_str
    AS
    TYPE type_refcur IS REF CURSOR;
    PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
    END pack_str;
    CREATE OR REPLACE PACKAGE BODY pack_str
    AS
    PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
    IS
    BEGIN
    OPEN ans FOR
    select id,name from col_tab where dept_name in char_in ;
    END str;
    END pack_str;
    the package was created.
    my doubt is
    1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
    2. when i was storing the value in string like val = 'ECE,CIVIL' ,
    how to get the id,name for ECE and CIVIL.
    plz help me

    Hi Rebekh ,
    I am recreating your packages for the desired output.
    CREATE OR REPLACE PACKAGE pack_str
    AS
         TYPE type_refcur IS REF CURSOR;
         PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
    END pack_str;
    CREATE OR REPLACE PACKAGE BODY pack_str
    AS
         PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
         IS
              lv_t varchar2(200);
         BEGIN
              lv_t := REPLACE(char_in,',',''',''');
              lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
              OPEN ans FOR lv_t;
         END str;
    END pack_str;
    Note:-
    Input Parameter char_in is a comma seperated value for dept_name
    -Debamalya

  • More than one role for a clip.Is it possible?

    Is it possible assign more than one role for a clip?
    thx

    Only one video role, only one audio roll, per clip.  Only one as these are "Media Stems", and when you work with Stems, only one roll per asset video, one per asset audio.

  • More than one index for a column.

    Hi,
    I am trying to create more than one index for a particular column of the table.But oracle does not allow more than one index for a column.
    I just want to make sure whether we can add more than one index for a column
    and if yes what are the scenarios.
    Because as far as i know some database allows more than one index for a single column.

    You cannot create more than one index for the same column(s).This is not so true Nicolas. Look at following example:
    SQL> create index idx_mytest_id on mytest(id);
    Index created.
    SQL> create index idx_mytest_id_desc on mytest(id desc);
    Index created.
    SQL> create index idx_fbi_mytest_id_upper on mytest(upper(id));
    Index created.
    SQL> create index idx_fbi_mytest_id_upper_desc on mytest(upper(id) desc);
    Index created.
    SQL> create index idx_fbi_mytest_id_lower_id on mytest(lower(id));
    Index created.
    SQL> create index idx_fbi_mytest_id_lower_id_dsc on mytest(lower(id) desc);
    Index created.
    SQL> create index idx_fbi_mytest_id_tr_up on mytest(trunc(upper(id)));
    Index created.
    -- I can still continue but for this example this will be enough
    SQL> select index_name from dba_indexes where table_name = 'MYTEST';
    INDEX_NAME                                                                                                    
    IDX_MYTEST_ID                                                                                                 
    IDX_FBI_MYTEST_ID_UPPER                                                                                       
    IDX_MYTEST_ID_DESC                                                                                            
    IDX_FBI_MYTEST_ID_UPPER_DESC                                                                                  
    IDX_FBI_MYTEST_ID_LOWER_ID                                                                                    
    IDX_FBI_MYTEST_ID_LOWER_ID_DSC                                                                                
    IDX_FBI_MYTEST_ID_TR_UP                                                                                       
    7 rows selected.You can see 7 indexes for one column (ID) and I could still continue...
    So according this test we can say you can't create more than one index for one column (or the same group of columns in case of composite index) with same condition(s).
    Message was edited by:
    Ivan Kartik
    Or simplified: you can't create the same index for same column(s) twice :-)

  • More than one style for a single link state?

    RH 8 outputting CHM
    Hello,
    Is it possible to define more than one style for a single link state?
    For example, I would like a link in the footer of my master page to be smaller than the links that appear in the body of my topics. I want to retain behavior, and simply change the point size.
    I can't simply hand format in Design mode, because my link is within a script. Or, am I missing something easy here?
    Thanks much.

    I'm pleased to say I figured out how to change the formatting of a hyperlink embedded within a script.
    Within the script, I used a var string to reproduce the text in my link. Then I used another var to change the string size.
    So, here's the part of my script that produces what I'm after:
    var mailDisplay = 'Was this information helpful? ';
    var str = 'Was this information helpful?';
    var mailDisplay = str.fontsize("1");
    Upon generation of the CHM, the script trumps the CSS. It's a beautiful thing.

  • Pass more than one argument for action in the URL

    Hi,
    i've created a DesktopURL object with which i refere back to the Front Page. With the same URL i want to minimize two channels at the same time. I know that i can minimize one channel with the "action=minimize&provider=myProvider" attribute.
    Is there a way to pass more than one provider for an action ?
    Or exists another way to do that ?
    thx

    In fact, my code was completely right. I tried with commas and it hasn't work. When I tried again without commas it worked perfectly...
    Nevertheless, thanks for the advice!
    Gilmar

  • SapScript - Print table out_par - more than one entry for object

    Hi Gurus,
    following problem.
    I have a SapScript form and call an external program from within the form.
    In this programm I get more than one entry for the same out_par-value - this is correct.
    My problem now is that on the form there is only printed one of the entrys.
    Here my coding in SapScript.
    /:           DEFINE &ZZ_OBJECT& = '        '
    /:           PERFORM LESEN_OBJEKTLIST IN PROGRAM ZIHFORM
    /:           USING &CAUFVD-AUFNR&
    /:           CHANGING &ZZ_OBJECT&
    /:           ENDPERFORM
    *           All involved object:
    *           &ZZ_OBJECT&
    Many thanks in advance for your help.
    Regards

    In Sapscript PERFORM-ENDPERFORM statements, the parameters can contain only one value as they are variables of type character & length 80.
    If you want multiple values in your CHANGING parameters, fetch all of them in different variables. Also, in your program store them in the same order, in the output internal table of structure ITCSY.
    Check this thread
    http://wiki.sdn.sap.com/wiki/display/profile/ExternalSubroutinesinSAPScript

Maybe you are looking for