Mail - How do I show the receiver in a own created folder in message list containing sent mails?

Hi there!
I created an own extra folder in the message mail list and put there mails that once had been sent (it works as an archive but I did not use the archive-function).
For obviously just mails in the Sent-File(s) show the receiver instead of the sender, I see my own name in all mails within the above mentioned file.
Is there a way to change the attributes of this file so it shows the receivers of these sent mails?
Thank you!

I don't have a mouse with a right click. But found answer on another support thread that works easily for me.
Mail keeps track of all your addresses to whom you sent mail before. In Mail, go under Window then Previous Recipients. Type in the address you want to drop and then click on Remove from List.

Similar Messages

How can I arrange the need for 2 (successive) commands before a message is actually sent?

In outlook express i have to use 2 successive commands before a message is actually sent. Can i have this also in Thunderbird?

well perhaps you could say what those commands are? Tell the whole story of what and why. Because as it stands I have no idea what your talking about.

How do i show the TIME of websites visited in Safari?

how do i show the TIME of websites visited in Safari that are listed in my history?

There is no easy way of finding timestamp of Safari history.
These two threads are from this community.
https://discussions.apple.com/message/17552960#17552960
https://discussions.apple.com/thread/1847145
For other third party suggestions, google it.
Best.

In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail

In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail? I want to click on a mail and read this in the preview pane only without showing it as read.

Not possible. In order to read an email in the preview pane requires opening the message. You can mark a message that you've read as unread after reading it.

Just got a new Macbook Pro with Maverick. In Mail, how do you get the format bar to show?

Just got a new Macbook Pro with Maverick. In Mail, how do you get the format bar to show?

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

When sending e-mails, how can I show only the name and not include the e-mail address?

When sending e-mails, how can I show only the name of the recipient and not include their full e-mail address?

Hi beverlyfromnull,
Have you added the recipients to your address book?

How can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it? iPhone 5, iOS 7

how can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it?
iPhone 5, iOS 7

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

In mail how do I get the latest entries to appear at the top automatically, at the moment I have to move the cursor from the bottom to the top to read the latest email?

In mail how do I get the latest emails to appear at the top of the column automatically. At the moment I have to scroll up from the bottom oldest entires to find my latest mail arrivals

What device are you using?
I assume you are talking about something other than the iPad?
Is there a sort order above the date column? Clicking on this can switch between Ascending and Descending order.

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

How to stop showing the pop-up window to change password

Hi,
How to stop showing the pop-up windows of changing password if the password is expired in dba_users table. This is related to form6.
Pls advice.
Thanks
Raj

Raj,
Please do not start a new thread with the same problem. If you still need help, respond to your former thread, and we will still try to help you. But you haven't provided an answer to why you can't trap the error.
Re: Trapping of error ora-28001, user expired in daa_users table

How do you show the number of days per month?

How do you show the number of days per month?
I am working on a budget. I want to know how much to amortize each month to fund an investment. Income comes monthly, but expenses leave in days, or weeks. The number of days and weeks in months vary.
I want to figure out income and expenses per day, per month and per year, so I know how much can be invested each month, week or day. For a start I would like a formula that shows how many days are in each month?

thanks..
I solve my problem as
public class MyExample {
    public static void main(String a[]) {
        String stdate = "2009-03-01";
        java.sql.Date currentDate = new java.sql.Date(System.currentTimeMillis());
        java.sql.Date preDate = java.sql.Date.valueOf(stdate);
        System.out.println(currentDate);
        System.out.println(preDate);
//        int dateCom = preDate.compareTo(currentDate);
//        System.out.println(dateCom);
        long diff = currentDate.getTime() - preDate.getTime();
        int days = (int) Math.floor(diff / (24 * 60 * 60 * 1000));
         System.out.println(days);
}

How can I show the chart in forms?

Dear all:
I want to create a line chart. I use the chart wizard and it is successful to create the chart. But, it can't show the chart when I run the form. How can I show the chart in form6i?
Besides, I see a document that refer to 'OG.pll'.
I can't find the OG.pll in form6i. Do I need 'OG.pll' to show the chart when I run the form? Thank you very much!!

Hi Carlos,
You can try to create a code node for check which signature to print.
In global variable declare a variable ie named g_sign type TDOBNAME.
Then pass this var to name of graphics &g_sign&
please check and reply.
regards,

How do i show the filename.type instead of the entire file path?

How do i show the filename.type instead of the entire file path?
I want it to show "ProgramSetup.exe" instead of "C:/Program Files/Oracle/JavaFX/ProgramSetup.exe"
I have created a JavaFX program with the help of my manager
below are the code
               File file = fileChooser.showOpenDialog(Admin.mainStage);
               if (file != null) {
                    textFiles.setText(file.getAbsolutePath());
                    String absolutePath = file.getAbsolutePath();
                    //String fileName = new File(absolutePath).getName();the reason i put the last line as // because it has error on that line....
if i remove the last line, it will display but with the full path....
i search through google and the guide on many forums aren't clear to me.....some said there are 2 ways but i tried and it is not working, atleast for me...maybe i left out something or what....can anyone help me on this?

You don’t need the absolutePath:
File file = fileChooser.showOpenDialog(Admin.mainStage);
               if (file != null) {
                    textFiles.setText(file.getName());
                           }

How do I show the details of a customer when they are logged in a secure zone?

How do I show the details of a customer when they are logged in a secure zone?
I want to show the customer details as well as some customer CRM fields that are applied to the customer. None of these are entered via a form, they would be entered by the client. The customer would need to be able to log in to view the information and get an email alert when it is updated. Help!?

Hi,
You might want to look into customer service zones which allows customers once logged in to see their case, order and own details.
- http://kb.worldsecuresystems.com/133/bc_133.html
- http://kb.worldsecuresystems.com/kb/customer-service-area-orders.html
- http://kb.worldsecuresystems.com/kb/allowing-customers-view-update-crm.html
Kind regards,
-Sidney

How we can show the xml data without any attribute in a flex tree (without having any label field) ?

how we can show the following data in a flex tree (without having any
label field) ?
<?xml version="1.0"?>
<rootNode>
        <childNode>
        < subchildNode >
                <valueNode>1000</valueNode >
                < valueNode >999-888-777</valueNode >
                < valueNode >STORTZ</valueNode >
                < valueNode >PAM STORTZ</valueNode >
                < valueNode >88 ST. MORTON ROAD</valueNode>
        </subchildNode>
        </childNode >
</rootNode >

as is - no how
wrap those xml chunk with a class having clear public properties like:
public class dataRecord {
     protected var xml:XML;
     function dataRecord(xml:XML) {
          this.xml = xml;
     public function get id ():String {
          return XML(xml.descendants("valueNode")[0]).toString();
     // and so on
simpliest way is to change xml structure to use attributes than wrapping that thing with AS code, it's time consuming and non efficient.

Mail - How do I show the receiver in a own created folder in message list containing sent mails?

Similar Messages

Maybe you are looking for