Mail, how to move and "mark as read" only copied mail?, Mail, how to move and "mark as read" only copied mail?
Hi, I need a help to make a folder-backup (using a limited-size Exchange mailbox ... )
Is there a way, using Rules/Filter for Mail to:
copy a mail to a specific folder
mark as read only the copied mail
If I write this rule, the mail is copied, but both mail are mark-as-read and I cannot find what I need to read.
Thanks.
But this marks the message as read also in Thunderbird.
Similar Messages
-
Is there a way to move a group of tabs to a new window? I know how to move one tab to a new window, but is there a way to mark a group of tabs and move them to a new window?
* Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/
-
My mail icon shows how many I have, but the screen is blank with no emails listed on the left side. They used to be there. I can send OK.
Any suggestions? I will read replies on another computer until this is resolved.First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
I have checked all my mailboxes--gone. How could they have disappeared? I am talking about 200 plus business emails. I am using Lion X.0
Thomas,
"Note that you were warned that this would happen and approved it. When you delete an e-mail account in Mail, you are shown a message like the following:"
You didn't read my problem - I said I deleted a POP email account. I always read the messages that pop up and in Mail when you delete a POP account - IT DOESN'T TELL YOU NUTHIN! It just deletes it - which *** for me. Fortunately, I had an iPhone and on that device I had about a 1000 messages that I could recover but on all my POP accounts I download them from the server onto my Mac so they were only on Mail (the really old ones that I wanted to keep.) I had to move them into another directory one by one basically because when I would move 50 some of them would move and some wouldn't and I never did figure out that problem. Basically the ones that would not move are the ones that were associated with my domain changes with GoDaddy, and there were a lot of those. Have no idea as to why only those were resistant to moving but I can get all that data from GoDaddy anyway.
This thread is now moot seeing as how I've recovered everything I can and am going to just move on - and back up more often. ;-)
Apple and Mail need to rewrite that program to include a WARNING MESSAGE when deleting an Account in Mail that says ALL YOUR MESSAGES ARE GOING TO DISAPPEAR NEVER TO RETURN IF YOU DELETE THIS ACCOUNT, SO YOU DANG WELL BETTER HAVE A BACK UP IF YOU WANT TO KEEP ANYTHING BEFORE PRESSING THAT MINUS SYMBOL! ;-) -
Mail has 16k messages, and performance is very slow, with loading times taking up to 5 seconds every time I open Mail.
How can I increase performance?
I'm running a MacBook Air 4GB 1.7GHz 10.7.2.
GrahamOne possible solution would be to organise your inbox into folders.
Its never relly good on any system to have one folder that has everything in it.
Try going to you web gui for that mail account and organise your folders and move mails from your inbox into corresponding folders for better organisation.
Several folders containing the same amount of one folder will usually load a little quicker as the folder may not be accessed to download its content unless veiwed.
So having 10 folders with organised content, and you inbox as an area thats to hold only new emails would work much much quicker with imap.
Most imap servers will only update the contents of a folder when its veiwed. -
When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?
Hi,
Already mentioned on the following post:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/VGA-on-laptop-HDMI-on-TV-needs-connected/m-...
You need a CONVERTER, not ADAPTER The setup:
The following list may help:
http://www.ebay.com.au/sch/sis.html?_kw=HDMI+To+VGA+COMPONENT+Adaptor+A+V+Digital+Converter
Laptop (VGA) ---- Converter from VGA to HDMI ------ TV
You also need sound, you can buy a converter with sound OR connect sound directly from laptop to TV.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?
Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941) -
How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts… 18 plus movies need to go…. Thank you.
Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:
-
hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?
So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac". I really, really miss Steve Jobs!
-
Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames. -
How can I read a column of numbers saved as .txt and display as a wave?
Hi Tiano
LabVIEW General
Ask:
Please enter a one-line summary of your question
Resources
• Technical Support
• Development Library
• Measurement Encyclopedia
"data/time reading into chart"
"In the attached file, I am trying to read the first column of data, and the next column is the value on the x-axis I want it plotted at. How do I read two columns of different data? I have looked in the books I have access to and the help within Labview but am still having trouble.
Thank you,
Ellie"
data_set (Plain Text, 3K)
-posted by Ellie on 9/11/2001
markwysong on 9/11/2001 answered:
"Ellie,
The first thing you need to do is to read your file in as a spreadsheet file. Then, you display it in a chart.
That sounds simple, but looking at your dataset, there's a few things you should know. First, the "read from spreadsheet VI" is looking for data in columns, like your data set, but columns separated by tabs. Therefore, your data must be saved that way; currently, it doesn't seem that it is. Another thing; you must skip the header portion (labels) of your file when reading.
Next, it would be easier if your time was first, and your data was second in your columns, but that can be overcome. In the VI I am including, I have copied your data set into a file called data.txt, and I've removed the header and separated the columns with a tab. Then, I read in the data, and I break out each column so I can put the time first, and then I combine them again into a cluster so it can be displayed on an XY chart.
Take a look!
Mark"
Graph data from file (Binary Executable, 20K)
data.txt (Plain Text, 3K)
This answer has not yet been rated.
Rate this answer:
Mikael Garcia on 9/11/2001 answered:
"Ellie,
Here is one way of doing it. Take a look at this example (compatible with LabVIEW 4.1 and up) and post comments if you need further help. Basically, I read your file as text; split it; and make use of the Spread sheet string to Array function before I plot your data. Hope this helps./ Mikael"
ExtractAndPlot.vi (Binary Executable, 36K)
This answer has not yet been rated.
Rate this answer:
Ellie on 9/12/2001 commented:
"Thank you. I am trying to get the data from the text file into a string and am having some trouble. I am reading the file from a spreadsheet, and sending the output array to "Array to Spreadsheet String", but I'm not sure this is what I want to do. Is there another way to make an array into a string? Do I need to reformat my data?
Can you offer me any advice?
Thank you."
data_1 (Plain Text, 3K)
Mikael Garcia on 9/12/2001 commented:
"I noticed that you changed your file format according to what was said here. Yes, this new file of yours is easier to use but your original file does not have to be changed. Take a look at this example. I now added the file-read part. It will give you a dialog to locate your data file (use this VI with your original file with the header since this VI includes a string split function). Hope this helps. /Mikael"
ReadExtractandPlot.vi (Binary Executable, 35K)
Niko on 9/12/2001 answered:
"If you read this file with the "read from spreadsheet file.vi" you get you
data in a 2-D-array. Now it is easy with array- and cluster-functions to
handle the data the way you want.
hope that helps, Niko"
This answer has not yet been rated.
Rate this answer:
I intend to read from a .txt file that contains a column of numbers. After reading I want to display it as a waveform. In fact the numbers represent points along a waveform/graph of Flow vs. time. Thus I want to have this info in the chart or graph with flow in the y0axis and time in the x-axis. Can someone give me some detailed help please? Thank you in advance.
Attachments:
The_file.txt 18 KBAll you have to do is use Read From Spreadsheet File.vi that's on the File I/O palette. For your example .txt, set the Transpose input to true and wire the First Row output to a waveform graph. The only problem I see is that since your file doesn't contain any sampling info, the time axis will be relative. If have that information elsewhere, then you can put a build waveform function between the read and the graph. Wire the First Row output to the Y input Build Waveform and add t0 and dt values. I've attached an example.
Attachments:
Graph_from_text.vi 29 KB -
Hi, I have a macbook pro 10.6.8 and an iphone 4s. I have already created an icloud account. I want my normal mails to be saved on icloud. how should i go about?
I'm not sure I understand your question really, but one thing for sure is that you need Lion for iCloud to work.
-
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
-
I have two Apple ID's and I would like to merge them into one Apple ID only and move Apps, Music, Movies etc to to the one Apple ID. How can I do that?
It is not possible to merge Apple IDs.
-
I can't get Firefox to send either photos out of Picasa or "send a
link" using my Yahoo!Mail option. Have set Yahoo as my default
and have set Yahoo as my mailto using tools/apps. When I
use "send a link" I am sent to my Yahoo sign in page and it takes
me to my inbox. How can I get a blank email form to come up?Typing in additional text seems to get the job done. This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest. Adding the extra text seems like a pointless step, but it does work.
Thanks. -
I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen
Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.
Maybe you are looking for
-
My Apple TV won't connect to the server...nothing has changed and never had problems before
Help...why can't I suddenly connect to itunes thru my Apple TV to rent movies? It says I can't connect to server
-
My iPod keeps on reseting and it never goes in just keeps on reseting on the apple logo anything i can do ?
-
Creating a transfer in Fixed Assets addon
My fiscal year is 01-Nov-2009 to 31-Oct-2010. My asset has acquisition date 01-Nov-2009. According to SAP help, you cannot book a transfer for an asset that was acquired in the current year. "If you want to book a transfer for an asset that was acqui
-
Search for a sound driver of creative vibra 128 model ct480
please i want this driver creative vibra 28 model ct480 for windows?seven 64bit..........my email? is? [url=mailto:[email protected]" rel="nofollow">[email protected][/url]
-
Is there a way to set a default in PSE 5.0 somewhere to name layers by file name rather than by Layer 1, Layer 2, etc. I am using PSE 5.0 to do digital scrapbooking. Each time I add a digital element to a layout (by opening the file and then sliding