Mail ID mentioned twice in SEND MAIL.

Hi
I want to know how does the SAP Mail box behaves. If i am passing the same mail ids in different containers (WF_INITIATOR and TRAVELLER), will the recipient receive the mail twice or just one time.
Thanks in advance.
Harsh

Hi,
For you're Scenario, it better to send via mail sending Program.
1) You have to write a Mail sending Function Module call it in the BO, then Task and Workflow.
Refer this [Program|https://wiki.sdn.sap.com/wiki/x/nYKdAw].
2) In this Program in the it_Receiver internal table, you can give as many person you want to send.
Regards,
Surjith

Similar Messages

Texts go into MMS and when I text someone it adds the recipient twice and sends out 2 texts.

I am having a problem after downloading the verizon update 10.1.0.4189 all texts go into MMS and when I text someone it add the recipient twice and sends out 2 texts. Anybody have this issue and any luck resolving?

Just found this thread: http://supportforums.blackberry.com/t5/BlackBerry-Q10/Text-messages-being-sent-switched-to-MMS-and-b... If anyone here's that this resolved, I'd love to know. Thanks!

Why do I have to click delete twice to send emails to trash

When I try deleting my emails, if it sends it to trash I have to select all and delete TWICE. Sometimes I doesn't even go to trash and it sends all I've selected to delete back as incoming email! Very frustrating. I've checked my settings already under the advanced tab. It's taken me 2 days to delete email, section by section. Any suggestions?

Hello,
Is this a POP or IMAP account?
If you highlight one & use CMD+Delete, does that delete it?

Since moving from POP to Imap, my send mail are shown twice

HI,
I have an hotmail account which I changed from Pop to Imap. Receiving, deleting and archiving mail work fine. But the send box in TB shows my mails twice. However mails which I send from outlook on line are shown only once.
Is it so that by having twice my send mails is taking twice the size? How can I make it back to normal?
Note that the addressees receive my mails normally , e.g. once . I have checked the account settings but did not find anything strange.
In going server : imap-mail.outlook.com
Out going server : smtp-mail.outlook.com
Thanks in advance for your support.

Hotmail/live/outlook.com accounts automatically copy a sent message to the Sent folder, so to avoid duplicates, uncheck "Place a copy in" under Tools/Account Settings/<i>hotmailaccount</i>/Copies & Folders.

Mail crashes when trying to send an attachament

Since using Snow Leopard I have had endless trouble with Mail quitting just after trying to send an email with an attachment. In the end most of them go after several attempts but with the last one (only 450K) I had to resort to using Entourage and even that crashed twice before sending the attachment. I have upgraded to 10.6.1 but that makes no difference.
I have no idea what the problem can be but Leopard used to work fine. What on earth have Apple done to screw it up and how can it be corrected.

That's fine, but every time it crashes it automatically sends a report to Apple. Must have posted about eight so far. The point is, how long do I have to wait before a solution arrives and what am I supposed to do in the meantime. You pay good money to upgrade and find that you have gone backwards in some respects. It wouldn't be so bad if you could uninstall the upgrade easily but that could put me into greater trouble.

Pages 09 is installed. But on the received e-mail was not a serielnr for activating pages so i cannot save or print any document.

I have downloaded Pages 09 on the i-Mac with the Lion version.
In the e-mail for confirming was mentioned an Ordenr....... and a long nr of 12 figures......
After making a document,it was not possible to save or print out.
I get a sjabloon with the text that I have to activate iWork first.
Next click gives me the sjabloon that i have to buy the complete version iWork!!!!!
or to fill in the serialnr of Pages mentioned in the sended e-mail from apple store.
I have tried that long nr (in case that this is the productserialnr....) but no any result.
Apple-store employees were not able to help me.
Where can I find the serialnr...as nr in the email was not working.
We have also tried with apple employee to remove Pages of the computer and empty the trash
for complety removig,but....... we still keep the message that Pages is INSTALLED.
So long we have this message we cannot re-downloadin program Pages according the apple employee!!!!
Apple is not able to solve this problem.
In mean time I have used my back up and also controlled the e-mail.
Pleas help me
Thank you
Martin Duynstee
[email protected]

This might be simple but it works well for me.
1.
Right click on the tool bar in IE8 and uncheck adobe PDF to disable. Click yes when it ask if you are sure.
2.
Open Adobe
READER located in the start menu.
3.
Click on Edit and then on Preferences.
4.
Select the "General" category.
5.
Click on "Select default PDF handler"
6.
Adobe Reader should be already selected. Change it to reader if it is not.
7.
Click on "Apply" and except changes.
8.
Restart the computer and you are done.
Now you can open and save PDF's from IE8. Once you save it, you can right click and "open with" Acrobat if you choose.
Be careful to not make Acrobat the default or you have to start over.
You can still create PDF's from docs, scans, and picture like before. You might think this is a work around but it really isn't.
Some forms that are available on the internet can't be opened by Acrobat for security reasons.
Good luck! P.S. I am not an IT tech but I play one on TV.

Why do I receive "4.3.2 connection rate limit exceeded" error message using the mail merge extension and what can be done about it?

I am using TB 31.3.0 with Mail Merge 3.9.1. I routinely send an email to 435 members of an volunteer emergency responders group that I coordinate. I do so using a .csv list with mail merge. While there were no problems in the past, more recently the mail merge function will hang after sending a varied number of messages successfully and I get the following error message:
"An error occurred sending mail. The mail server sent an incorrect greeting: 4.3.2 connection rate exceeded.."
There is an "OK" button in the error message pop up that can be clicked to resume the mail merge process. It would appear that if I click the "OK" button immediately whenever the error message is received I must do so frequently and some members do not receive their email. If I delay clicking the "OK" button, I found that I only needed to click the "OK" button twice to send to all the members.
An on line search suggests this is the result of some sort of throttling by my ISP, Sonic.net. There is also this comment: "If you are receiving this error, you are likely using mailing list software which cannot decipher the temporary fail codes. If so, you will need to set your software to slow down its delivery rate and/or reduce the number of active connections per remote host."
I am not super technical. Is it realistic to think that I can tweak mail merge to that I do not have to babysit my email to this group?

then I suggest you send using a mail provider that is not actively trying to block your outgoing mail. Or use a yahoo / google groups mailing list feature so you only send a single mail.
Or use a free account from the likes of http://www.ymlp.com/ who limit free account mailing lists to 1000 subscribers. ( Googled them this morning)

Two Attachment through mail

Hi Guys,
I have an reqirment , i have to pick two files from application server and send through mail,i ma able to pick file from application server,and able to send 2 attachment through mail,but only 1 attachment opening properly,other is not opening,
HOw can we sens 2 attachment through mail.
points will be rewarded.
Thanks
Ankur Sharma

Hi,
You can refer to the below mentioned thread.
Send mail with 2 attachments
Regards
R Adarsh

Outbound Internet Mail

Hi!
My outgoing email is not working i have tried everything and the mail for outgoing to internet is not working.
I can recieve email to from internal and external.
I can send mail internally.
But i cannot send email external. can someone please help me with this?

Hi Benyamin ghavam nader,
1.Please try to telnet the next hop and that would be your smart hosts like (edge server,cisco iron port or any other third party email systems) .By doing that we came to know about the reachability between your exchange server and next hop .
2. Please check with the queue viewer there would be an chance to find out the errors occurred to reach the next hop (i.e to internet )
3.Then enable the protocol logging for the send connector (i.e configured for internet) which would help you to find the error messages in the logs which has occurred during the communication between your exchange server and smart host .
4.There might be lot chances to have issues in smart host , to confirm again please do message tracking which would help you find the whether the message has reached the next hop(i.e smart host) or not .
5. If you are routing email to internet via smart host please check did you have correct ip address mentioned on the send connector or not .
6.If you are routing via mx record please check host A and mx records are configured properly in AD.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Mail glitches?

My Husband sent an email to his bank in December 2013. In the sent box the email shows three errors:
1. His name is not mentioned as the sender, but the name of somebody else (a teacher from my son's former school).
2. The date of the email being sent is 2 years before the date of the letter itself.
3. The email was sent from my husband to the bank manager, but it appears to be sent by myself (Catherine) to my husband (Bob).
Can somebody help me with understanding these errors?
(See image below.)

Back up all data. Rebuild the mailbox.

Surveys does not send to Vendor.

Hi SRM community.,
I am settup the ROS scenario, let me explain my problem in srm 7.0 scenario classic extended scenary
1.- vendor link into ros_selfreg and create the registration process(ok no problem)
2,. prescree process the user review the petition and accept and send the mail with the surveys. the system show and green status and sucessfull process.
problem or question.
into the SOST transaccion I can not see the e-mail with the survey or link. its working that way.
thanks. I am appreciate your valuable time.

Oscar,
Pl run the report UXS_ADD_MISSING_XSLT_NAME.
The earlier settings I mentioned were for sending user id and password mails.
Regards,
Nikhil

PCK Sender agreement

Hi mates,
At <a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/content.htm">help.sap.com</a> I see that Sender agreements are not required in cases of proxies, SOAP & Mail adapter.
Since there is no Receiver Determination Step in PCK and receiver has to be mentioned in the Sender Agreement, If Sender agreement is not required for proxies, SOAP & MAIL, how are the receiver party & service mentioned?
Do they have to be sent by the client programs of proxy, SOAP & Mail? If yes, the WSDL generated has to contain the details of the receiver psrty and service too. Is that true?
Please clarify.

As for RD in XI i am pasting lines from sap.help
To forward the message, the following objects are required in the Integration Server:
·        Party and service of party A, which sends the message. If there is a signature and you want it to be validated, you must also define a communication channel of type Sender and XI. In this case, you must also create a corresponding sender agreement (SA2).
·        Party and service of party B, which receives the message. You must define a communication channel of type Receiver and XI.
·        A receiver determination (RD) to determine the receiver of the message.
·        An interface determination (ID) to define the inbound interface for the outbound interface of the sender.
·        A receiver agreement (RA3) to transfer the message from the Integration Server to the PCK of party B.
Hope it helps.

Newly Puchased Refurb iMac Display blew; Send back or repair?

Just wanted to get some thoughts from the forum gang. I just purchased a new refurb iMac Intel Core 2 Duo white from the Apple Online Store, and it worked great...for about 2 weeks, when last night the display freaked out and then blacked out. I took it in to my local Apple Store to be repaired, and they told me I had the choice, since I just received it May 9, to have them repair it or that I could send it back to Apple for a new one. Well, a new refurbed one. I was really torn. At least with this one I know everything else worked great, and if all they have to do is put in a new display, it will be a lot easier than removing the added RAM, repacking it, mailing it back to Apple, waiting for them to receive it and send another one, and then wait all day for FedEx to deliver it.
If it had been a new computer, I wouldn't think twice about sending it back, but how do I know I wouldn't get a replacement refurb iMac with more problems? So I opted to let the Apple Store repair the one I have. As the replacement display was not in stock, I do have some time to weigh my decision. What do you all think is the better option? Thanks much.

Normally you have the 14 day timeframe to reject the Mac. Sometimes with a refurb you pay for the model and occasionally you get an Easter Egg or two. Were there any free upgrades that came with the Mac? Upgraded HD or graphics card or extra RAM?
With a brand new Mac you would not get a refurb replacement during the 14 day timeframe, you would get another brand new Mac.
Since this is a refurb, this may not be the first thing to go wrong. It could be a lemon, it happens, even with Apple. I would definitely buy the Apple Care extended warranty with this one.
Then again, replace the display and you may have the best 'puter you have ever had. One can never tell with electronics. But Apple always stands behind its product.

Sender File Adapter FCC to Hierarchial MT Coversion

Hi,
   I have MT with structure as follows
Header               1..1
    F1          string 1..1
    F2          string 1..1
    SUB              1 to unbounded
       S11       string 1..1
       S12       string 1..1
Can you anybody help me out how to convert the a CSV file to Convert the structure mentioned above using sender File Adapter FCC.
Regards,
Daniel.LA

Hi,
There is no suc h direct way to get the data from csv fiel with conversion.
Either you can use JAVA Mapping for it or use the adapter module to read csv files.
How to process CSV data with XI file adapter
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
"JAVA MAPPING", an alternate way of reading a CSV file
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
There is one way that you could bypass IR (Integration Repository) for any type of files, see below link
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Making CSV File Lookup Possible In SAP XI !!!
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
This will help you
Thanks
Swarup

Sender File Adapter - Fixed Length

We have a Fixed File(Sender). With 3 fields. NO Header. Space is the separator for each fields
VendorNumber 10 bytes
VendorName    10 bytes
City           5 bytes
In the File we can have multiple records.
The Root Node is Vendor.
I am trying to define the SENDER FILE ADAPTER in the following way (I have referred mostly all the blogs) but my file is not picking up for some reason.
File looks like this
V123456789 A123456789 Bosto
V234567890 B123456789 Atlan
V334587900 C123456789 Austi
Note : I have been asked to give the Transport Protocol as   "NFS" (Whether this is the problem???) I have summarised the complete details below. Please help me
Adapter Type : File       Sender
Transport Protocol : NFS
Message Protocol   : File Content Convervsion
Adapter Engine     : Integration Server
FILE ACCESS PARAMETERS
Source Directory :   /business
file Name        :   vendor.txt
Content Conversion Parameters
Document Name : Vendor
Document NameSpace: http://sap.com/xi/XI/SplitAndMerge
Recordsetname : Message1
Record Structure : File_MT,*
Recordset Sequence: Ascending
Key Field type    : String(Case Sensitive)
Additional Parameters
File_MT.fieldFixedLengths 10,10,5
File_MT.fieldNames        VendorNumber,VendorName,City
File_MT.fieldSeparator
File_MT..processFieldNames fromConfiguration.

Hi Naveen,
      Do check the following things,
>>Note : I have been asked to give the Transport Protocol as "NFS" (Whether this is the problem???) I have summarized the complete details below. Please help me
       1.If your file resides on your local network/local computer give NFS(Network file system). if your file resides on a FTP location give FTP and also give the FTP log on parameters.
Additional Parameters
File_MT.fieldFixedLengths 10,10,5
File_MT.fieldNames VendorNumber,VendorName,City
File_MT.fieldSeparator
File_MT..processFieldNames fromConfiguration
       2.If this structure does not match with the input file structure the file adapter wont pick up the file. So check for the help document provided by SAP in the following path.
help.sap.com --> Documentation --> SAPNetWeaver --> SAPNetWeaver '04 --> English --> process integration --> SAP Exchange Infrastructure --> connectivity --> Adapters --> File Adapter
       Your file contains three records
V123456789 A123456789 Bosto
V234567890 B123456789 Atlan
V334587900 C123456789 Austi
You have mentioned the fieldSeperator as space but there is no File_MT.endSeparator '/n' which differentiates between each and every row (record).
        Parameters for Record set Structures mentioned in the sender adapter configuration does not match with the actual file structure .
        Try giving exact structures in the configuration of sender file adapter.
regards,
Aravindh.

Mail ID mentioned twice in SEND MAIL.

Similar Messages

Maybe you are looking for