Mail & IMAP : unable to use "exotics" server port ?

Hello,
I updated my IMAP configuration on server side, to change listening ports to something less usual than 993.
It's working fine on my mac, so server's configuration is OK.
But my iPhone refuses to connect to this new port, and always displays "unable to connect to ..." (using my WiFi, or 3G).
If I switch back to the usual port 993, and reconfigure the iPhone, it's OK...
Have anyone experienced the same thing, or managed to configure iPhone to connect on a specific port ?
Message was edited by: aK`

Triple-click the word "telnet" in the line below on this page to select the whole line:
telnet imap.gmail.com 993
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You should almost instantly get three lines of output below what you entered, the last of which is this:
Escape character is '^]'.
If there's no output within ten seconds, consider that a failure. If you get something different from the above, please post it in a reply. You can then quit Terminal.

Similar Messages

How to send mail in PL/SQL using exchange server details.

Hi Experts,
Business user has provided us the exchange server details to send mails.How can I send mails thru PL/SQL using exchange server details.

user595740 wrote:
Business user has provided us the exchange server details to send mails.How can I send mails thru PL/SQL using exchange server details.Basic answer - not easily.
Oracle supports the standard application protocol SMTP - it does not support a proprietary protocol like that used by Exchange that only works on the Windows operating system. It however provides you with the flexibility to code this yourself.
If you for example use Microsoft MAPI (Mail Application Programming Interface), you can integrate it with PL/SQL using the external procedure (extproc) feature of Oracle.
In a nutshell, extproc enables you to create PL/SQL wrappers for public DLL calls. I posted sample code that demonstrates this in {message:id=2271919}. The sample code is for calling a DLL interface on HP-UX, but the concept is identical on Windows.

OSX Mail - Cannot send message using the server ....

Hi there,
Mac Pro with OSX 10.6.
*Can receive mail, but can no longer send email* using the program Mail.
Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
I googled this problem, and found solutions like:
1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
4. We even totally deleted my account, and started a new fresh one. Didn't work
The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
So there, I'm stumped.
Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through 5 OS's (I am using Lion but I had the issue using leopard as well) is a disgrace.

Fmsmaster using admin server port

It seems after a while the admin server stops responding on our fms server. When logging into the linux machine, I can see that the fms admin process is not running, and the pid in fmsadmin.pid is stale. When trying to restart the service with:
"./fmsmgr adminserver restart"
it fails to start the service with the following message in /var/log/messages:
Failed to create listener for adaptor admin, IP , port 1111: TCCommBridge::createListener 0.0.0.0:1111/v4: bind failed!!!.
Failed to create listener for adaptor admin, IP , port 1111: TCCommBridge::createListener 0.0.0.0:1111/v4: bind failed!!!.
Failed to initialize listeners for adaptor admin, FMS is already running or other processes are using the same ports.
Checking to see what is listening on port 1111 with netstat:
tcp        0      0 127.0.0.1:11110             0.0.0.0:*                   LISTEN      11005/fmsmaster
tcp        0      0 0.0.0.0:1111                0.0.0.0:*                   LISTEN      11005/fmsmaster
This is the second time this has happend. How is it possible for fmsmaster to be using the admin server ports, and how would I prevent this in the future?
Thanks,

5065bfd6f653ec44bfb34d158297604b fmsmaster
303928c69d89aaf28da983925874c73b fmscore
3c39636a7c99d3aa431985d20b780a75 fmsedge
54167368f1fbe02d34cfc0e639787203 fmsadmin
Today it seems it is showing as fmscore is incorrectly listed as using this port.
tcp        0      0 127.0.0.1:11110             0.0.0.0:*                   LISTEN      922/fmscore
tcp        0      0 0.0.0.0:1111                0.0.0.0:*                   LISTEN      922/fmscore
apache     922 11005 0 09:02 ?        00:00:00 /usr/local/macromedia/fms/fmscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app Voice3 -inst 2904 -tag -conf ./conf/Server.xml -name _defaultRoot_:_defaultVHost_:Voice3:2904:
FMS is still configured to only listen on 1935,443,80. Does this mean it is something to do with the machine itself or maybe the installation of fms?

Unable to use HDMI IN port on B550

Hi, I am unable to use the HDMI IN port on the B550, whenever i switch to HDMI mode, the screen is blank with no signal. But HDMI OUT port seems to work. anybody with similiar problems to this?

Hey everyone. I'm from Brazil and Im with a similar problem to yaoyuan, or sort of...My Ideacentre B550 dont work the Hdmi-in when I try to use my Playstation 3. I've tested my cable tv at hdmi in it, and works great. I connect my netbook at the hdmi in at B550 and the B550 worked as a secondary monitor just fine too. But when I connect the ps3 at hdmi-in the b550 seems to get it (is not as I dont plug anything) because the screen is not total black but a dark grey (the counter when the b550 doesnt find anythign didnt appear), but no sound or image appear.. .I changed hdmi cable but nothing happen. Used the same hdmi cable at a tv and ps3 and works.PS3 works just fine at the 3 tvs i have, with the same hdmi. only when try the b550 no image appears. Cables (i teste 3) are ok, PS3 is ok... Did anybody knows anything about an incompatible thing to ps4 and Lenovo B550? * I've checked cable, the source option at the b550, settings at ps3 (setup up at another screen as when I plugged into b550 no image appears). I've also try to use a hdmi swicht but no changes at all. All the time the only difference is that b550 is dark grey when pluged the ps3 (and not black). Cheers

Mail keeps trying to use .mac server - help

This concerns my mothers iMac that we just put a clean install of Panther on.
In mail, it attempts to use a .mac smtp server to send the mail. I went to preferences>accounts and even deleted the .mac smtp account. I left her Charter account there as the only account visible.
Still, mail attempts to send the emails using the .mac smtp server. An error window pops up asking to verify server info. We called Charter and all our information is correct for Mail. In the error window, the only server it gives us to select to send the mail is .mac smtp

You may have tried this already, but just in case :
If you go into your Mail preference/accounts settings again, and into "account information", can you see a box at the bottom marked "server settings " ?
If so, you should be able click it, and then delete or modify the smtp server(s).

Unable to use the recording port more than once at a ti

Greets. I'm in a clan that uses Ventrilo for their Battlefield 2 games, and that's all fine and dandy...Love Ventrilo... Though, I am unable to talk in BF2 -and- Ventrilo at the same time. Everyone else in my clan can talk on BF2 and Ventrilo at the same time.Here's some examples so hopefully someone can help:Scenario )When I open Ventrilo first, and launch BF2, all my audio options for microphone are greyed out and set to 0%.Scenario 2)When I open BF2 first and launch Ventrilo, Ventrilo gives me an error about the <SPAN class=highlight>recording port already being in use or something weird like that.Scenario 3)When I open FRAPS first (with <SPAN class=highlight>recording sound enabled), then launch Ventrilo, Ventrilo gives me the same error. Same with BF2 when it comes second, all my options are greyed out.Would installing my sound card for my motherboard work, as long as I set the correct <SPAN class=highlight>recording device? I don't want to do that, because I want to use my SB Li've! instead. Does anyone have the same problem?
Here is my DxDiag info:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
-------------Sound Devices------------- Description: SB Li've! Audio [D000] Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_02&DEV_0002&SUBSYS_00A02&REV_0A Manufacturer ID: Product ID: 00 Type: WDM Driver Name: ctaud2k.sys Driver Version: 5.2.000.0296 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 9/8/2003 9:47:22, 496800 bytes Other Files: Driver Provider: Creative HW Accel Level: Standard Cap Flags: 0x0 Min/Max Sample Rate: 0, 0Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, NoSensaura(tm) ZoomFX(tm): No Registry: OK Sound Test Result: Not run
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
Earlier this afternoon, I started a cleansweep of my entire system with entries in the registry pointing to anything having to do with SB Li've!. I've got rid of -everything- except for one thing that's really bugging me:In the Control Panel, there's an AudioHQ icon, and when I double-click it, nothing happens... I don't know how to get rid of control panel icons, but considering that's still in there, makes me wonder if there is still something lingering from my last installation.
Now, you're all going to laugh at me for this one, but I've been through two major upgrades (mobo, CPU, sound card, etc.) without formatting. I've been meaning to do this, but I hate formatting, because then it takes like a week to get the computer running the way you want it to.
While uninstalling all my sound drivers, I decided to go into the add remove programs to uninstall some old crap I never used. I saw two enries....BF2, and BF2 demo... Thinking of how I don't play the demo anymore, I will uninstall the demo- 'cept it uninstalled the entire BF2 retail game. Sooooo.....My way to test this isn't even installed, but it seems to be working all right when I launch FRAPS and Ventrilo at the same time.
But then it started to get strange...
When prompted at Windows startup to install new hardware, I had inserted the SB Li've! driver disk and tried to run setup.exe - It says:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>So, on the New Hardware Installation, I had it automatically search for the drivers by CD-ROM, and it found them in the Drivers/audio/win2k folder (Running Windows 2K SP 4), and seemed to install them just fine. After they installed, I heard some sound, thinking everything went smoothly.Now I try to install the upgraded drivers I downloaded from Creative's website:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>So I check out my device manager:<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/devicemanager.gif" border=0>Thinking I was able to run FRAPS and Ventrilo at the same time, I tried to load Battlefield 2 and Ventrilo at the same time and got this error:
<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/input.gif" border=0>
So I knew it was hopeless.
Then I popped in the SB Li've! CD again and it auto-loaded with the driver installation program, and I selected the typical installation, thinking I may have missed something doing a custom in the past.
Now my device manager shows:
- Creative Game Port
- Creative SB Li've! series
But, it gets strange again. After installing the factory drivers from the CD and then trying to install the updated drivers from Creative's website, I get the same error I got above:
<IMG alt="" src="http://mywebpages.comcast.net/jaldarith/tw/error.gif" border=0>
At this point, I am extremely stuck. Every one of my friends can play Battlefield 2 and have Ventrilo loaded at the same time, and still be able to talk through each program's independent voice over IP.
Is my sound card even able to do such a thing?Message Edited by Jaldarith on 08-23-2005 05:37 PM

Just checked the model of card youre using by Hardware ID
PCI\VEN_02&DEV_0002&SUBSYS_00A02&REV_0A = SB0220 SBLi've! 5. Digital,
and I think if this is correct, you'll may find some other frustrationed owners asking the
same question you have.
Have you tried these drivers
and/or
these drivers
About this issue you and the others are having:
[url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=4670" target=_blank>See this thread[/url]
BTW:
You perhaps can install Audigy 2 drivers and software to your card. Here are the instructions how to do it.
It's quite easy process. Download Audigy driver/software package (~20MB) (link is there), extract it into some directory. Download the patch (link is on Automatic Method sentence)and follow instructions how to patch the instalation package. Then installation process. I've modded my Audigy 2 to Audigy 2 Zs using a similiar method and everyting else, but GraphicMixer, works great.
.jtpMessage Edited by jutapa on 08-24-2005 06:38 AM

Mail content does not load in Apple Mail 10.8.2 using exchange server

About 10 am this morning Apple Mail stopped working. Initially, no emails could be sent or received even though connection doctor found nothing wrong with the internet connection. At 4pm, email would load but with just the sender and the subject - no content will load. Is anyone else having this problem with Mail?

http://support.apple.com/kb/ht4889
Migration from Mac OS X v10.4 Tiger to OS X Lion
Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
On the Mac you want to transfer data from, Restart, and immediately hold the T key.
Wait for the FireWire logo to appear on the screen. If it does not, restart and try again.
Connect both Macs via the FireWire cable.
On the Mac you want to transfer data to, Open the Migration Assistant application.
Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
Select the option "From a Time Machine backup or other disk" and click Continue.
Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

Unable to use proxy server with MAC OS X Anyconnect client

Hi All,
I have a VPN setup thru a Cisco 5520, Windows clients connect just find and the end users configure there browser to use our internal proxy servers. Users with the MAC OS X Anyconnect client can connect, they configure their Mac to use our proxy server, but the broswers will not work, clients can reach networks and resources behind the VPN gateway and have access to the Proxy(Tried a telnet to that hostname/port). Anyone run into this issue before? I am running ASA 8.3(2), Anyconnect(OS X) 3.1.01065.
Thank You

We had the same problem.
We are behind government firewall so I don't know which Cisco firewall is used but we are using AnyConnect to establish VPN from internet to LAN behind firewall. We have no problems with Windows. With Mac OS X connection through proxy didn't work with Safari and Chrome (both are using system Proxy setting), but it did work with Firefox (which has it's own Proxy).
Finally we found out that ethernet MTU size was the culprit. When we set it to manual, with size being 1347 (or less), proxy started to work.

Unable to use relay server using https configuration

Hi All,
I am using Sybase Unwired Platform 2.2 SP 04 with iOS 7.1.
I am implementing relay server with https configuration. I have already implemented relay server with http using port 80 which is working fine. But when I am changing the outbound enabler property from http to https in Server Configuration, outbound enabler is giving error
"Could not connect to Relay Server, errCode: 57, sysCode: 11001" in the RSOE log.
Instead of public IP, I am using hostname.com URL for accessing relay server.
Also in browser the availability of the url: /ias_relay_server/server/rs_server.dll is showing none.
Kindly advice.
Regards
Debidutta

Hi Wim,
The above log that I posted recently is the messaging RSOE log generated from the sybase control center.
Now below is the log content from the relay server log at C:\inetpub\logs\LogFiles\W3SVC1
#Software: Microsoft Internet Information Services 7.5
#Version: 1.0
#Date: 2014-04-08 13:34:14
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-
Agent) sc-status sc-substatus sc-win32-status time-taken
2014-04-08 13:34:14 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - xxx.xxx.xx.xxx IAS_OE_DnChannel 200 0 64 8050579
#Software: Microsoft Internet Information Services 7.5
#Version: 1.0
#Date: 2014-04-08 13:34:20
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
2014-04-08 13:34:20 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 15
2014-04-08 13:34:20 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 46
2014-04-08 13:34:21 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 31
2014-04-08 13:34:21 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 31
2014-04-08 13:34:22 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 62
2014-04-08 13:34:22 172.22.219.193 POST /ias_relay_server/server/rs_server.dll - 443 - 112.xxx.xx.xxx IAS_OE_DnChannel 200 0 0 1781
Below is the log contents found at C:\Windows\System32\LogFiles\HTTPERR-folder
2014-04-08 13:34:15 112.xxx.xx.xxx 60782 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 BadRequest RelayServer
2014-04-08 13:34:15 112.xxx.xx.xxx 60810 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 Connection_Abandoned_By_ReqQueue RelayServer
2014-04-08 13:34:15 112.xxx.xx.xxx 60782 172.22.219.193 443 HTTP/1.1 POST /ias_relay_server/server/rs_server.dll 400 1 Connection_Abandoned_By_ReqQueue RelayServer
As you can see, we are getting Bad Request in the last log contents.
I request you to provide your valuable suggestions on this.
Regards
Debidutta

Unable to use Content server

Hi experts,
I have the following scenario.
Document Area          Storage Repository      Storage Category
CFF                               ZCFF_01                      ZCFFMAIN
DMS                              ZDMS_01                     ZDMSMAIN
Now, when i am checking the files from cFolders to content server it is using the cfolders storage category and happening properly. But when i want to check in the files from DMS using KPro ( indicator checked in DC10 againt the document Type), It is not happening. it is giving me an error message as " An error occured while creating the original attribute for DOC". When i have gone inside the error message, In the application log for object "SDOK" it is showing " An error occured while calling the function module SCMS_DOC_CREATE" and in the details it is using the storage category ZCFFMAIN ( it is the storage category for cFolders). Actually it should use the storage category ZDMSMAIN ( storage category for DMS).
Can you tell me whether i have missed out anything or any customisation wrongly done ?
Is this the only thing that has to be defined or do we have to do some thing for the data carriers as well? Please elaborate your answer.
Christoph Your expert help is very much needed.
Thanks and Regards
Bhaskar

Hi Bhaskar,
as also mentiond in your support ticket I would kindly ask you to see the attached note 1173675 and check the mentioned entries in table SDOKPROP. Please made sure that all mentioned 22 DMS related entries are maintained and that there is no typing error for these entries.
Please note that for using a storage category in document management the document area 'DMS' has to be used. So please change this setting in transaction OAC0 and OACT from 'CFF' to 'DMS'.
Additionally I would kindly ask you to check if you have maybe maintained the storage category for workstation application DOC in a profile in the customizing under
Cross-Application Components
- Document Management System
- General Data
    - Define profile
Because this could explain why an other storage category is choosen by the system.
Best regards,
Christoph

Unable to use any USB ports on Satellite P50-A (PSPMHC-01M00P) are Windows 7 Ultimate Install

Hi Everyone,
I created a dual-boot Win7/Win8.1 system on my Satellite P50-A (PSPMHC-01M00P) unfortunately, even though I was able to find a working USB Controller driver from a similar model's Win7 driver, I can not get the laptop to recognize or install anything USB device regardless of which port I plug the device into. It's as if my USB ports are disabled when in Windows 7. This isn't the case with my Windows 8.1 installation.
Could this be a driver issue since I know it's not a hardware one? Could anyone recommend a suitable non-Canadian Windows 7 64bit chipset driver that I could try in hopes to resolve my USB functionality?
Any help is appreciated.

Satellite P50-A-01M (PSPMHC-01M00P)
We support US computers at this site. Everything for that Canadian model is here.
Unfortunately, your site does not include anything for Windows 7. As you've noticed, that Windows version does not support USB 3.0 natively. It needs a driver.
But you are in luck! Because it's in the same part-number family (PSPMHx), this US computer uses the same drivers and utilities. Compare the specs.
Satellite P50-AST2GX1 (PSPMHU-01G00R)
Those downloads are here.
If you want everything to work, the order of installation is important. Start with a clean install of Windows 7. Install the chipset software and display drivers prior to any other drivers. Install the TVAP before any other Toshiba utilities.
-Jerry

Outgoing server port configuring not in Mail 3.5 - problems sending mail?

I recently upgraded from Tiger to Leopard and one of the things I noticed is that in Mail 3.5 undere Mail>Preferences>Accounts under the Account Information tab, there is no longer the ability to select or change ports for the Outgoing Server.
In Mail 2.x, there was an Advanced button that would let you choose a different port and select SSL (or not). In Mail 3.5, this feature is missing. Does anyone know if the outgoing server port can be changed? The reason I ask is that when I travel, my ISP will not accept any of my outgoing mail because I'm not using my home IP address (especially with .mac). This is usually remedied by changing to a different, less common port for the outgoing server. If I'm unable to change outgoing server ports in Mail 3.5, is this going to cause problems sending mail when I'm on the road? Any help would be appreciated. Thanks.
Ed

If you pull down the bar in the outgoing mail server, you should be able to select "edit server list" and the window shows up where you can set up port.

Gmail-Mail imap server

Since 2 days, I experience server problems with the IMAP Gmail server, so that I cannot load mails. Are there other users with the same problem?

Yes, I am having the same problem.
Using Mail v6.6 this morning Jan 4th 2014 I get this error message from my account linked to gmail
"Mail was unable to connect to server “imap.gmail.com"
Can't tell if it's a local issue or wider gmail problem. Can't seem to fix it at the moment.

MDM Server Ports with Batch operations

Hi,
how can i use MDM Server Ports what i define in ports table of my repository in MDM Console with ImportManagerBatch and especially with SyndicatorBatch? i use 5.5.24.06 SP2.

Hi Dmitry,
My understanding is that ports are most useful if you are using XI MDPS (Master Data Processing Server?). You define ports in the console. Key thing to remember a port works if you attach it to a client system that is defined as inbound/outbound; does not work if the client system being associated is just inbound or just outbound. You define the file format under format setting.
In my case, since I do not use XI, I need to manually associate the location of my files to the regedit setting. Only then, port setting can be selected on the import manager file definition.
I learnt how to define ports. I use import manager batch and syndicator batch but I did not see an additional benefit of using ports with them. For example, I have 70+ tables to load using import manager. Most are based on Excel and XML file types. SO, I have my ini files defined for each of the XMLs, and one for excel (it has several tabs) with source, destination, and file location information. Then, I have a bat file with IMB commands associating each of ini files to a map/agency/language, etc. And execute the bat file from command line.
May others in the forum who used ports with IMB or Syndicator batch can give more insights.
Thanks
Savi

Mail & IMAP : unable to use "exotics" server port ?

Similar Messages

Maybe you are looking for