Mail Inbox Showing Multiple Entries Lately

As of Jan 7 my Mail inbox on my MacBook Pro began showing multiple lines for each email received. At first it was five or so repeats, and now, evey time Mail refreshes it multiplies the earlier repeats such that the oldest ones going back to Jan 7 are repeated 100 times, and more recent are repeated less. Odd thing is that mail proior ot Jan 7 still appears as a single inbox item. Its like all mail since Jan 7 is multiplied each time i refresh.
On my iPhone, the mail inbox is acting normally.
Any ideas on how to solve?
Thanks.

I trashed all of my incoming email since Jan 7th, and these come back upon refreshing. First as two lines, then when it refreshes again, it comes as four lines for each, then eight, etc.
Mail previous to Jan 7th is OK and is not multiplied.

Similar Messages

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

List View Showing Multiple Entries for Certain Records

I've been updating my large mp3 library with album art in order to make the list view more useful and fun to look at. With just a handful of records however I've noticed that they're getting split into multiple entries. For instance, Album X shows up twice, with one entry displaying only song 1 and the other entry displaying the rest of the songs.
I've looked hard at the tags but I don't see any difference. All the records in question were ripped using iTunes so they're not coming from different sources either.
Any thoughts would be hugely appreciated! Cheers.

Thanks again; I tried the solution this morning and it fixes the problem. I've marked the thread as such. Unfortunately it's a lot of fiddly updating, but hey, it's better than no workaround at all.

Mail Activity shows multiple sends for 1 send

Just a curious little bug. When I send one email, the Mail Activity panel at lower left shows anywhere from 2 to 6 emails being sent. It should show 1. Has anyone else seen this?

Try not to worry to much about that. Remember, depending on the type of network connection you have, the email client, and the size of the file, the email will not always be sent in one heap.. instead the mail program and the email host and he various servers it may go through to get the infomation to where it needs to it will chunk the infomation into multiple packets, and it will go through multiple servers before it gets to its destination. I would sugest syncronyzing your accuonts, and f you need to rebuild your inbox. But try not to worry about that to much that it shows seveal times in your activity monitor.

My ipad 2 mail inbox shows there are 12 emails still in the box, how do I get it to stop saying I have emails when I obviously do not?

My ipad 2 shows that I have 12 emails in my hotmail inbox. There are absolutly no emails in the inbox. I deleted everything from the normal inbox, trash and spam. I have also tried closing out the app so it starts fresh, I have restarted my ipad etc. I really dont want to delete the account becasue I cannot remember the password and the password always gets sent to someone else and they wont let me change it. I will do this if it is my last resort. But does anyone have a clue how to fix my problem?

When you do an upgrade, sometimes the pad goes back to the isp server for the unread count. These are likely old e mails that you never opened, and are so far down the list that they dont make it to your oad. In any event - go to the mail server via safari or on a computer and use webmail. You can find those emails there and delete them -

Mail inbox shows no mail on managed user account

Upgraded to 10.5.6, mail works fine in my main account.
However in managed account for my daughter her mail shows no messages.
i can find her old inbox, I want to restore it to her inbox.. Any thoughts?
I am using parental controls, I have added all her email addresses to the list. I can see her previous recipient list.
Also when I close Mail in her user account I must force quit it, do not have to in my main user account.
iMac G5, 2 gb ram, did archive and install to load 10.5.6, all software up graded, permissions verified and fixed using Onyx and disk utility.

I certainly agree you have to wait to clone intel vs ppc!
But the settings inside the user should certainly be portable - they are just XML files and the options need to be the same even if the code has to be different when compiled as a universal binary versus PPC only code.
The time out period and on/off status as well as whether you need a password to unlock/unsleep is a system wide setting. The last admin user to make a change there wins (undoes any other settings)
The other settings can be different for each user. (Dock icons/arrangement).
Again, simply make one mac perfect and then make a disk image of the /Users/shortname folder on the "correct" mac and copy the contents of that folder to another machine. I think you will find that as long as you correctly preserver the owner permissions/bits the new mac will look exactly like the old one.

Why does mail program show multiple copies of a message, in various stages of completion in the trash folder ?

I am using an iMac with OS 10.9.4, Mail 7.3. My mail trash file contains multiple copies of partially complete messages I've sent. This problem seemed to begin when I began using "Maverick".

I have this exact same problem.
32 copies of one email. 3 o4 copies of others…
Rebuilding the trash makes no difference at all.
Any other suggestions? I have rebuilt my other mailboxes as well.

Track changes showing multiple entries for a single change?

Hi there .. I'm using Pages '09 v4.1 to edit MS Word '97 documents. I've been using the 'track changes' feature to work on chapters in a book and have done so with no problems so far (about 6 chapters so far in separate files). I went to start the next chapter and noticed that when I make a single change such as highlighting a word and making it italic, the tracking bubbles will show up as individual entries for every letter instead of for a single word. The really annoying thing is that it's not consistent .. some whole-word changes show up as a single entry, while some show as a few entries but don't necessarily correspond to how many letters are in the word being changed. When I try deleting specific tracking bubbles to see which part of the word they correspond to, it varies. For example, if I put the word "similar" in italics on page one, paragraph one, it shows up as 2 entries. When I delete the last entry, "imilar" will go back to standard font, while "s" stays italic until I delete the other entry. It's as though the words in the document are being recognized based on something other than the obvious, and certain letters are being grouped together in the program's brain, while others are separate.
It's not isolated to italics, btw. If I reformat the entire document to be left-aligned instead of center-aligned, it will show lots of separate tracking bubbles in various places through the document, rather than showing one bubble for my single change.
I've tried duplicating and saving a new version of the document, as well as creating a new doc and pasting everything into that and saving as a new doc, though I wasn't sure if this would carry over the problem .. It did.
It's not the end of the world as far as finishing this job, but it's pretty annoying and will be worse for the person who ultimately verifies the changes I've made. Any help is greatly appreciated.

TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
It won't cause any problem.

Search function in member filter shows multiple entries by value

Dear all,
when using the search function to specify a filter on specific members, we are facing the issue that in the result area, the result value for one member is displayed redundantly several times.
The access mode is set to "values in masterdata", but as my members are unique by key, I wonder why the members are shown multiple times.
Does anyone has a solution for this?
Thanks and best regards,
Andreas
PS: we are on 1.4 SP8

Hi Martin,
in this case I clearly do not have any compound elements, as 0PLANT is a stand alone characteristic. Other objects like 0MAT_PLANT (where I would have a compound element of 0PLANT) are not available in the providers - and even then it would be strange if AO would check against this objects when I try to apply a filter on a different member....
Regards,
Andreas

AssignedTo showing multiple times on report

I was tasked with creating some reports from Service Manager using the cubes. My boss wanted a report that showed all active tickets, showing from high to low the analyst, then the category, then the user.
I used the following Fields:
IncidentStatusValue in the Column Label
IncidentDimCount in the Values
AssignedToUserDim.DisplayName, IncidentClassificationValue, and AffectedUserDim.DisplayName in the Row Labels.
The report looks exactly as I want it to.
The problem is that the data is wrong on several levels.
Issue 1: It shows multiple entries for the AssignedToUserDim.DisplayName
I changed the names, but if I click on the number 1 next to Joe User(Affected User) for either Analyst1 or 2 a tab open with IR48005. Basically the two analyst both show an active ticket assigned to them, when only one of them should.
Issue 2: The Grand Total that is calculated by the PivotTable is incorrect. I copy and paste the same numbers into the cells next to the PivotTable and the total is something completely different.
The weird thing about this also is that when I did this 20 minutes ago before writing this post, the Autocalc showed 130.
The first issue is more important than the second issue. It is not just this report and I have tried using many different values only to get the same duplication. Its almost like the DataWarehouse is not actually deleting the previous AssignedTo
user. The history in the actual ticket shows that it should be, but the reports show something different.
This then throws off every report I try to make. I made one for totals tickets per analyst and I noticed that I got credit for closed tickets that I had previously reassigned, as did the person who the ticket was reassigned to.
Can anyone offer any suggestions?
Thanks.
Matt

Unfortunately no. But I think I found a pattern in regards to this: it seems the current assigned to user is always the one listed the last.
I guess this is because the stored procedure behind the AssignedToUserDim doesn't filter if the relationship is still active. This is quite easy to "reproduce" via PowerShell.
Lets say you have an IR with ID IR1234 which has been re-assigned multiple times.
If you run this small query now in PowerShell you'll see that all the AssignedToUser relationships still exists, but only one of them has the property "IsDeleted" set to False.
Import-Module SMlets
$IRO = Get-SCSMObject -Class (Get-SCSMClass System.WorkItem.Incident$) -Filter "Id -eq IR1234"
Get-SCSMRelationshipObject -BySource $IRO | where {$_.RelationshipID -eq "15e577a3-6bf9-6713-4eac-ba5a5b7c4722"}
So, in the DB those AssignedToUser relationships (actually it applies to all relationships) won't be "overwritten" or the old one deleted as soon as you re-assign an incident for example. Instead, new relationshipobjects will be generated and the old ones
changes the "IsDeleted" attribute to True.
Perhaps it would be possible to create a new Dim for the Data Warehouse, re-use the stored procedure for the AssignedToUserDim and modify it slightly to filter only for the active AssignedToUser relationship. Then you could use your newly created dim to
display the current Assigned To User. I haven't tested this though, probably it's more complex than I assume :)
Cheers
Alex

Multiple entries in context menu

Hi,
when right click on a file to open with a programm, the context menu shows multiple entries for some apps. My question is now how to put away multiple entries?
Best regards,
Thomas

If you are speaking of the "open with" list having multiple application entries, if could be caused by a couple of things.
1) The entries could not actually be "duplicates", but essentiially are to you, as you only want one. If you have or have had more than one version of an application, the menu will list all versions of that app that are/were ever detected.
2) The list could be populated with duplicates that the system detected when either networking with another Mac, or accessing a cloned drive of your system. If this is the case, you need to rebuild the database that is serving up these duplicates.
Resetting the 'Open With' Menu
Resetting the 'Open With' menu will remove duplicates and ghost applications (ones you have deleted) from the list. You reset the 'Open With' menu by rebuilding the Launch Services database your Mac maintains. There are multiple ways to rebuild the Launch Services database, including third-party system utilities like Cocktail and Onxy.
If you don't own a system utility that can rebuild the Launch Services database, don't worry; you can perform the rebuild yourself using Terminal.
Using Terminal to Rebuild the Launch Services Database
Launch Terminal, located at /Applications/ Utilities/.
For OS X 10.5.x and later, enter the following at the Terminal prompt, and press enter:
/System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.fram ework/Support/lsregister -kill -r -domain local -domain system -domain user

Contextual menu in finder "open with" has multiple entries of same apps

When I use the contextual menu (right click) on documents, the menu point "open with..." shows multiple entries of the same programs. For example when right clicking a PDF, there appears 5 times neoOffice, 2 times Preview, 6 times ... any other application that you could use to open the document. This occurs on all user accounts, only that the multiplicity of listings of the apps is different. So it can't be a preferences problem on my account. What else could be the cause?
This is quite annoying because the apps-list becomes very long and unusable.
Note: I have 2 internal start up disks with OS and apps installed, but only one mounted. That means, there cannot be a duplicate (triplicate...etc) copy of any app accessible at any time.
Thanks.

if I quit all running applications, it will be pretty hard to put anything in the Trash!
Are you being literal? Like quitting the Finder too? Or what bespeaks you?
Actually, I use Xupport to do that, but I think Onyx and several other Utilities include that option.

TS3276 How do I set up Mail to show the number of messages in each of my mailboxes?

I just upgraded to Yosemite yesterday and am getting used to how things look. I'm almost positive that yesterday my Mail inbox showed the number of messages that were there, but now there is nothing. However, the number of flagged messages is shown. Any help with this? It's just a format thing, but I like to know how many emails I have in my inbox. Thanks!

Yes, I can see the number of messages, including unread, in the application title bar:
This is temporarily hidden in full screen view but re-appears if you hover the cursor over the top of the title bar.
The screenshot above is from an iCloud account, and I get the same with a gmail account, but I don't have an Exchange account I can test.
H

UWL showing multiple userids

Hi,
We have a consumer portal connecting to multiple backend systems and multiple BI portal systems. When I try to forward a workitem and search for a userid, it shows 2-3 entries with the same userid. I am not sure why it's showing multiple entries with the same userid, though userid is unique. Is it picking up the userid from all the systems it's trying to connect?
Please let me know with helpful answers/suggestions.
Thanks in advance
Regards

Can anyone suggest me on this pls.
will for helpfull ans.
Thanks in advance

IPad Mail Inbox Puzzle

Suddenly my iPad mail inbox shows 11,497 unread messages -- except that when the inbox is selected there are no messages. When new messages are received they can be opened, read and deleted. Still the inbox shows 11,497 unread messages. Where do I go from here? Operating system is 7.1.2.

shrd.bhagwat
This is not the discussion thread for your question but if you can get a copy (hard or .pdf) of your particular iPad manual you should look at re-booting the unit. But first you should close all your open apps. Hit the home button twice quickly the screen will shrink and show open apps to the right of the main page. Swipe UPWARD the apps that are open(to the right of the main page). The open apps will close and disappear and repeat until none are left to the right of the main page. Then follow your main manual to re-boot the iPad. Usually hold the power down top button and the home button at the same time. The screen will go blank and either restart after a minute or so or restart by hitting the top button.
Your manual should indicate how to power down and restart the iPad.
This may work. The same problem happened to me and I think this is how I fixed it.
Other wise go the the Apple Support site and you can work thru the links to find the iPad and its Tech manuals which you can open and read to find trouble shooting and normal use of the unit. Book mark this link. There are iPad SYSTEM menu items that say reset the iPad and I think that may wipe out some remembered WiFi info which you might have to re-enter all that hidden log on and account e-mail account data +password and may not be needed.
Good luck.

Mail Inbox Showing Multiple Entries Lately

Similar Messages

Maybe you are looking for