Mail is not displaying some messages... just getting "A's"

For some reason my mac Mail isn't properly displaying emails... help!

Well, ~Bee knows FontBook lot's better than I do. But what I would do is drag all but the default fonts out of /Library/Fonts and rather install them in ~/Library/Fonts if you need them. Then boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
Choose Reinstall OS X. This will be an install "in place" and shouldn't effect any of your own data or settings.
If will re-install all your system fonts.
http://www.jklstudios.com/misc/osxfonts.html

Similar Messages

TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Can not find some messages in Mail using search

I have some problems with Mail.app I can not find some messages in Mail using search, the strange thing is that sometimes mail search finds some messages, but after rebuilding spotlight index the search displays other messages with the all messages searched using same search criteria. I have also tried to delete Envelope index file from the Mail folder in usr/library and forced mail to import all mailboxes but it started to crash importing some of mailboxes - I deleted the messages from that mailboxes, imported remaining mailboxes and tried to rebuild mailbox, but everything without a successes. Any ideas how to solve it?

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Mail not displaying certain messages

Mail is suddenly not displaying certain messages in mailboxes. I can see and select the message in the center pane, but when I click on it to display, I get the "Loading" text and the spinner. This continues without resolution, though sometimes the messages will display after quitting Mail and/or rebuilding the Mailbox.
It is not random messages that do this, but always the same ones that refuse to display. But they will display sometimes after a rebuild, so I know they aren't gone.
Some have image attachtments, others do not.
This just started this morning, following running Disk Utility to repair some HD corruption last night. Prior to that, Mail (and Safari) had been running very slowly for about three weeks.
I have already repaired permissions on this drive.

Acutab,
I had the same problem. I took your advice and rebuilt the mailbox-voila. The problem was solved. I have also noticed Safari running slow. I will try and run Disk Utility

I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

To diagnose problems with Thunderbird, try the following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Preview.app will not display some PDF files

Since upgrading Yosemite I have found that Preview.app will not display some PDF documents, the documents open but all the pages are blank. This is a big issue as my work involves reviewing documents that are all in the PDF format. Strangely some PDFs work properly but I haven't been able to determine any common factors among the documents that work versus those that don't work. The problem documents do open correctly in Adobe Acrobat Reader but Reader takes over viewing of PDF container fields I have in several important FileMaker Pro 13 databases. Acrobat in the FileMaker databases for me is just as much of a problem as not viewing PDFs in Preview.
After searching the forums I followed suggestion in a post to try using version 7.0 of Preview.app (the version that worked under Mavericks) but that is also showing blank pages. I have noticed that the PDFs which open as blank pages also display that way in Finder and Spotlight previews. Could this mean that I have some kind of OS level issue here and not a Preview.app issue? Perhaps Finder and Spotlight use Preview.app to generate the preview.
I have posted this in a bug report to Apple but in the meantime I would welcome any suggestions or workarounds to try.

The built-in PDF renderer has trouble with that file. You might get better results with Adobe Reader.

ADF FACES: af:messages/ does not display my messages at all

I am having an issue displaying messages using ADF MyFaces EA20.
<af:messages />
Within all backing beans I call messages with the following method to conveniently display messages when needed.
// Add invalid email address message
JSFUtils.addMsgToContext(FacesMessage.SEVERITY_ERROR, "setEmail_error", MsgConstants.INVALID_EMAIL);
The method utilized can be seen below:
public static void addMsgToContext(FacesMessage.Severity severity, String msgKey, String descKey) {
 // Check the parameter, if either short desc or desc both are empty
 if (StringUtils.isEmpty(descKey)) {
 logger.error("Message description are empty. Do NOTHING just return");
 return;
 try {
 logger.debug("Add Message to Context");
 FacesContext context = FacesContext.getCurrentInstance();
 Application application = context.getApplication();
 // Add the message to the context
 context.addMessage(msgKey, getMessageFromBundle(descKey, severity));
 } catch (RuntimeException e) {
 * Supress RuntimeException.
 logger.error("Error occured when add message to context", e);
With the first login page when validating username and password, the messages I send to the context display correctly, for example, incorrect password please try again and this uses exactly the same code as above in the backing bean.
However once a session has started the messages simply do not get displayed and are not included in the HTML the <af:messages /> is replaced with nothing.
No runtime exception is thrown.
If anyone has any idea of why the messages are not being displayed I would be very grateful to hear them.
Finally if I may add that I used this method of displaying messages in a previous project and it was fine. This time the only difference is that I am using Hibernate.
The closest answer I could find to a similar issue with Oracle Forums was:
The messages have to be added before the Render Response phase. It's generally very unusual to add messages in a bean getter/setter. I'd restrict yourself to adding messages in event listeners and actions.
I do put messages in my setter methods as this is where I perform validation, but I have tried moving them to the main method called by the action button and this still does not display my messages.

Frank
There is a standard way? Next time you can simply tell me to RTFM ;-) . I am working on a project and was assigned my particular section and was told that the messaging aspect and validation was not urgent, until now near the end of the project when it has become urgent. Rather then listen to my colleagues answer of "this is the way to do it" your answer suggested that we working in a non-standard way.
Having looked at Oracle JDeveloper 10g (10.1.3) Documentation, Validation, Conversion, and the Application Lifecycle section I noticed:
Render response:
Either display new page based on invoked navigation rules, or displays same page with errors.
I was providing a new navigation String to the same page under all conditions, which I guess gives a new context and so does not display the messages. Under error conditions I now return an empty navigation String and now it displays my messages.
Thank you for your help with this and I promise to read the manual next time.
Andrew

Mail will not display, screen returns to home screen when I try.

MMail will not display or load up. When I enter the mail icon it instantly returns to the home screen. Therefor mail will not display or show.

The Mail App is crashing on you. You might have a corrupt email, a spam email or an email with a very large attachment that is causing the crash. It could also be a corrupt setting. It's difficult to know that it could be. If you have a computer, log into your email account in a web browser and look for any problematic emails and try deleting them there.
Try closing the mail app completely on the iPad, reset the device and then try mail again.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to display Some message in the BEX Explorer

Hi Experts,
We have a scenario where we will check for a condition in the User Exit Variable.
Depending on the condition we need to stop the execution of the query and display some message.
Can any one please help me in explaining me how to display message in the BEX and stop the Query Execution.
Thanks in Advance,
Premkumar

Somenath,
I think from what I gathered in the other posts on SDN about exceptions that it can be used only within a function module and not directly ..
http://help.sap.com//saphelp_470/helpdata/EN/9f/dbaa0635c111d1829f0000e829fbfe/content.htm
Try creating a Z Function module to display the exception but then the exception would stop only your Z Function module and not the user exit from going further..
Arun
P.S some more dope on the same with regard to raising exceptions in programs ( in your case ZXSRU01)
http://help.sap.com/saphelp_nw04/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/636d2012fc11d5991e00508b5d5211/content.htm
Message was edited by:
Arun Varadarajan

IPad not displaying some photos after transfer.

iPad not displaying some photos after transfer from Windows Vista PC, only displays the word "JPG".

Hi Terence,
Sorry but did it as you adviced and have the same issue. Missing many of pictures. But they were on original external drive.
Just wonder what the aditional libraries doing on the external hard drive. Never created any of them.
Thanks for advice.

Mails are not displayed after migration to new iMac

Hello!
Today I migrated the contents of my old office iMac (G4, MacOS 10.4.11) to my new one (new 20'', MacOS 10.5) via FireWire.
Unfortunately my mails are not displayed on my new Mac:
I can see all my mailboxes on the left side, but the window, that should show the mails themselves is empty. I already took a look into the /library/mail folder and all my mails seem to be there.
They are just not displayed.
I use mail on that Mac with only one POP account.
What could cause this behaviour?
Thank you very much in advance!
Thomas

I figured out niw, how to solve the problem:
After the migration go to the Userdirectory-> Library -> Mail and delete the files:
MessageRules.plist
MessageRules.plist.backup
MessageSorting.plist
MessageSorting.plist.backup
Then Mail works properly.
(The only thing ist, that all filer rules are gone.)

Mail will not receive any messages

As of 9:30 Thursday morning, Mail will not receive any messages. I can still compose and send but incoming messages just sit on Google's server (where I've been reading and replying). Nothing was changed, Connection Doctor shows everything to be fine, I've checked and reentered passwords, quit Mail, restarted the computer, etc.
Suggestions?

I tried that again, including another shut-down, and based on another link, changingthe"check for new mail" preference from "automatically" to "every 5 minutes."
No change.

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

Why is Safari not displaying some pages correctly?

Safari seems to be messing up again. Had this problem quite a while ago. It's not displaying some pages correctly.
Notice the 2 enclosed screen shots. I went to purchase something (no personal info in the jpgs)
Notice the W-Safari. Little trash cans by the purchase items missing as well as the submit button and a few other things. So I opened Chrome.
Notice in the W-Chrome, everything is displaying correctly.
I've had problems like this some time ago but I thought they were fixed.
Thanks for any suggestions or help.
Allen

Post a URL so what we can look at it.

Edge running slow/not displaying some items on stage

My project's growing quite large but I'm keeping everything very tidy and importing only small files (tiny PNGs, well compressed short videos, etc) but I've found the file slowing down and now it's not displaying some of my images and symbols.
Also when I now preview in Browser it takes forever to load a page - BUT - if I drag the .html file on my browser it opens and works fine.
Why would it be doing this? Can allocate Edge Animate more memory? I have an 8-core mac with 28GB RAM and plenty of HD space (which should be fine for this)
Thanks
J

Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
* If you use extensions (Tools > Add-ons > Extension) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
See also:
* [[Websites look wrong]]
* [[Website colors are wrong]]

Mail is not displaying some messages... just getting "A's"

Similar Messages

Maybe you are looking for