Mail Loosing Inbound messages

The symptom is that I connect successfully to my POP3 inbound server but no mail appears in my Inbox. Sending mail is fine - the messages get out and are recorded correctly in the Sent Messages.mbox
Given the following:
    1) Connection Doctor shows green lights on BOTH incoming and outgoing
    2) I can send mail successfully
    3) The OS environment is:
        iMac /OS x 10.6.7 (updates current)/Mail 4.5 (updates current)
    4) Here are the permissions on the following folders:
        /users/khiggins/Library/Mail/
            khiggins(me)    Read & write
            Everyone         No Access
             /Users/khiggins/Library/Mail/[email protected]@mail.kmk3.com
            khiggins(me)    Read & write
            Everyone         No Access
        /Users/khiggins/Library/Mail/[email protected]@mail.kmk3.com/INBOX.mbox
            khiggins(me)    Read & write
            Everyone         No Access
    The same permissions on the Sent Messages.mbox are the same as the INBOX.mbox
I had modified the permissions on these folders to allow me to gain access from another account and then found that I was no longer receive mail. I hacked around the permissions with no success.
I am hoping that setting the permissions on the related folders will solve the problem. But I am not sure.
Does anyone know the default permissions for the folders that mail.app uses? And do you think that this problem is a permission problem or something else?
Thanks
Ken

Update - This was definitely a permissions problem. I had to reinstall OSX Snow Leopard to fix it.

Similar Messages

EDI Message Type for Credit Memo inbound message

Hi Experts ,
We have ECC6.04.
We configured Incoming vendor invoice idoc ( Message Type - INVOIC, Basic type - INVOIC02) which is working fine. We also have Credir Memo incoming message ( Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)
I am using same IdoC in WE19 that of Invoice, which successfully posted and editing the BSART as CRME and entering the Messgae type GSVERF , but when I am posting it system is giving error
No record exists in T661W for vendor 2000001 , plant , unloading pointMessage no. V4032
Diagnosis
The system could not determine a sold-to party as no record has been specified in Table T661W for the displayed supplier, plant, and unloading point values.
System Response
IDOCS processing is terminated.
Procedure
Please create a record in Table T661W for the above values and restart the IDOCS planning from electronic mail.
and
EDI: Syntax error in IDoc (segment cannot be identified)Message no. E0078
Diagnosis
The segment E1EDK04 does not occur at the current level of the basic type GSVERF03 (extension ).
This error can have several reasons:
The segment E1EDK04 is assigned to a group whose header segment does not occur.
The segment E1EDK04 does not exist in the syntax description of the basic type GSVERF03 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type GSVERF03 (extension ).
Th table T661W is for Vendor, partner decribtion, Sold to party, Unlaoding Point. So I am not getting whsy sold to part relevant table ssytem is asking to make entry ?
Can anyone please suggest/help me what is the problem and solution on this ?
Thanks
NAP

Hi ,
Currently we are using Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)..which is giving above error. I just found that process code GSVE is for Outbound message
Can any one suggest / confirm what should be exact Message Type , Basis Type, Process code and Funct. Module requiered for processing EDI inbound message in MM - Logistics Inv Varification ?
Thanks
NAP

HT4972 Will I loose my messages if I upgrade my iphone to iOS 5 ??

I have been wanting to upgrade my iphone as I still have 4.2.8 to the iOS5 but I am afraid I will loose my text messages. Will I loose my messages if I upgrade or is their a way to save them before I upgrade ? I need to do this ASAP as I cant get icloud or several apps because I need the upgrade first! Thanks!! Christine

Thank You for all your help. My son has been trying to get me to update for sometime but I was so afraid I would loose my messages & even my contacts I'm Not sure will be saved either. Since I have to update my contacts thru my iphone since verizon doesnt support this I have NO clue where they are backed up to & if not doen every 30 days u can loose them so I have a reminder set to do this every 30 days. I also checked on WHAT ALL IS INCLUDED IN A BACK UP & i DIDN'T SEE ANYTHING ABOUT VOICE MAIL MESSAGES, DO YOU KNOW IF THESE ARE BACKED UP OR SHOULD I LISTEN TO MESSAGES TO BE SAFE? aGAIN THANK YOU SO MUCH!!

Mail: Clicking a message in Inbox should open it in a separate window (not just in lower pane). This stopped working after an automatic update of OS(10.6.8). Suggestions?

Before updating software (10.6.8), in Mail, clicking a message in the inbox caused the message to appear in its own separate window-- not just in the pane below the inbox. I'm not sure why this function is no longer available. I guess I could delete Preferences (where?) and see if that does it. Any ideas?
Thanks,
Nick

Before updating software (10.6.8), in Mail, clicking a message in the inbox caused the message to appear in its own separate window-- not just in the pane below the inbox.
Uh…no it didn't. Double-clicking a message would open it in a new window. Regardless of whether you have the message pane visible, you still have to double-click the message if you want it to open in it's own message window.
I guess I could delete Preferences (where?) and see if that does it.
No, you can't do that; not unless you want to say bye-bye to all your email. Don't even think about messing around with things unless you know what you're doing, and the consequences.

How to use Mail to sent messages when away from home

How do I have to configure my "Mail" on my PowerBook G-4 (OS 10.4.5) in order to use it in a WIFI enviroment?
At home when connected via Airport to my own Outgoing Mail Server (smtp 8. sympatico.ca) I have absolutely no problems. However, last year I was on a Cruise Ship and tried to use the existing WiFi System. I could receive messages using Mail, but I could not send messages using Mail.
At the moment I'm visiting my son in the Boston area and I'm having the same problem. I was forced to use the Sympatico Web Mail in order to sent E-mail messages. (receiving mail using "Mail", represents no problem)
There has to be a way to configure Mail to originate messages and sent them as well, but I cannot find anything which tells me how to do that.
The version presently installed for Mail is 2.0.7.
Any help in this regard would be greatly appreciated!
Best Regards,
Hank
iMac 20 G-5, 768 of RAM; 12 PowerBook G-4 Mac OS X (10.4.5)

Hank,
The problem here is your ISP (looks like its Sympatico) blocking connections to their mail server from computers not connected directly to their network. I wouldn't blame your ISP though b/c as I understand it almost ALL ISPs block these type of connections to cut down on SPAM being sent.
What you need to do is to find the outgoing mail server for the network you are on.
For example, if you look on the "Mail" settings on your Son's computer and note his "Outing Mail Server" (in the "Accounts" pain of "Mail" prefs) settings and then go to your machine and put in that same "Outgoing Mail Server" info then you should be fine.
You can do this on your machine by selecting "Add Server..." from the "Outgoing Mail Server" drop down menu. When the window comes up just type in the same settings your Son uses. If he does not have a machine with mail setup on it then you can call his ISP and they'll tell you.
Remember to switch the "outgoing mail server" back to your home server when you return home. By the way, most places (like hotels) will give you their outgoing mail server info if you ask them, so next time you're on a cruise with wifi you might try asking the IT people.
Best of luck,
Allen

How can I disable e-mail and text messages when I'm close to or over my data quota ?

How can I disable e-mail and text messages when I'm close to or over my data quota ?
Is this possible? I don't see any options?
All I see is this:
Receive confirmations of many account transactions via Email and/or free Text Alerts delivered right to your cell phone. You can receive these confirmations for
   transactions done online, over the phone or from your handset. Account management Text Alerts do not count against any Messaging allowances.
      Your bill is ready for review.
     Payment Confirmations: Your payment has been received    Your credit/adjustment     has been applied.1
     Account Activity Confirmations     Plan changes     Feature changes1

What phone?
You would need to disable data on the phone itself. You wouldn't do it online on your account.
Note also that text messages do not count toward your data allowance.

Is there a way to hide the reading pane in iPad mail after a message is read?

Is there a way to hide the reading pane in iPad mail after a message is read?

Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

Can't delete mail on phone, message says unable to move message the message could not be moved to the mailbox trash

can't delete mail on phone, message says, Unable to move message The message could not be moved to the mailbox trash.

Delete your mail account/s and re-add them.
This is what worked for me but I've read about other solutions that have worked for some people as well:
http://forums.macrumors.com/showthread.php?t=612773

[svn] 1751: Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtopic value (which may contain wildcards) that the Consumer is using.

Revision: 1751
Author: [email protected]
Date: 2008-05-15 14:21:43 -0700 (Thu, 15 May 2008)
Log Message:
Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtopic value (which may contain wildcards) that the Consumer is using.
QA: No - customer verified the fix.
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-174
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageClient.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/MessageService.java

If you create a metadatatype with a single metdata block, and you reference that in your vm/cm cell attribute using a *one* based index, Excel seems to see the link and it honors it when saving the spreadsheet.
So, I ended up with something like:
<c ... cm="1"/> (I'm dealing with cell metadata, but the concept is equivalente to value metadata)
<metadataTypes count="1">
  <metadataType name="MyMetaType" .../>
</metadataTypes>
<futureMetadata count="1" name="MyMetaType">
  <bk>
    <extLst><ext
uri="http://example" xmlns:x="http://example"><x:val>87</x:val></ext></extLst>
  </bk>
</futureMetadata>
<cellMetadata count="1">
  <bk><rc
t="1" v="0"/></bk> 
</cellMetadata>
Hope this helps.

Error receiving AS2 message from partner: B2B-50037: B2B inbound message processing error

B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
        at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
        at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
        at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
        at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
        at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
Ken

Ken,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work.

Handling inbound messages in B2B

Dear All
I have problem configurating B2B to receive any inbound message from the IP_IN_QUEUE, local directory or ftp. Basically, the remote partner transport just doesn't go and pick up the incoming messages. All outbound messages work fine. I am using the HL7 protocol.
I have tried to set oracle.tip.adapter.b2b.DocumentRouting=true as recommended in the manual but it doesn't help.
Just wondering any other setting I need to change before the engine is able to pick up inbound messages.
Thanks in advance,
Alan

Dear all,
I can finally recieve an inbound HL7 with MLLP. One strange thing I find is that the Win32 version does not have the option for entering the "MLLP ID". However, I Still do not have much luck with inbound file.
I now have other questions. We want to setup a B2B server to receive all HL7 messages. As the B2B server would process all incoming messages and put it in the IP_IN_QUEUE, how would the BPEL processes know which message they should pickup from the queue? I read something about the document routing ID but it seems that HL7 doesn't have this feature.
Another question, is it possible to adjust the frequency of the B2B server to poll the outbound queue for jobs? We have applications that require very fast response and the current setting just do not serve our needs.
Finally, is it that if we want an inbound queue services in B2B, how long does it take for the feature to be included in the service?
Thank you very much for you help,
Alan

MDM adapter Non-XML Inbound Messaging

Hi all,
I have a scenario where I transport a csv file via PI (NW711_05_REL) to MDM using the File adapter (sender) and MDM adapter 7.1 7.1 (receiver).
The message is sent through to the MDM port fine, and it seems to choose xml as default file type and PI MSG ID as file name.
This results in an xml file with csv content.
As I want to put the file on the port with its original file type (csv) and name, I need to tweak the MDM adapter a bit. For this I have tried to find MDM specific modules, but have been unable to do so.
I have found a u201Cwork aroundu201D by using u201CSet Adapter Specific Message Attributeu201D on the sender file adapter u2013 described on help.sap.com
Configuring the sender file adapter as described in http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9854884d3217cee10000000a421937/content.htm i am able to set the "FileName" attribute in dynamic configuration.
This enables me to get some of the desired effect, as the file on the MDM port is now a csv file u2013 half way there!! However the file name remains PI MSG ID...
Am I missing something here or is the adapter not working as intended? I donu2019t understand why it should only use the file type when the entire filename and type is there. I would assume that the entire filename and extension would be used in the MDM port.
I have tried achieving the desired result by using the "AF_Modules/DynamicConfigurationBean" on a JMS adapter, but the result is the same.
I would like to avoid developing my own custom module to handle this, as it seems like it should be possible to handle in a more standard way.
I hope someone out there can help me out, and hope to see a lot of good replies.
Best Regards,
Jesper

have you gone thur these settings?
Non-XML Inbound Messaging
When the backend system uses the PI File Adapter sender as the communication channel to deliver messages to the PI server, and the receiving MDM channel corresponds to an inbound MDM port of type other than XML (for example, Flat text file), then you must enable the File Adapter Specific Message Attribute named File Name as follows:
       1.      Edit the corresponding File Adapter sender communication channel.
       2.      In the Advanced tab, choose Set Adapter Specific Message Attribute.
       3.      Choose the File Name.
       4.      Save and activate the changes.
http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9854884d3217cee10000000a421937/frameset.htm

[URGENT] Get Inbound Message in EBS Using XML Gateway + SOAP

Hi experts,
I want to ask you about how to process the inbound message using XML Gateway and SOAP protocol.
I have 2 EBS instances, let's called it A (source) and B (destination).
FYI, I'm following this ebook: "Oracle E-Business Suite Development and Extensibility Handbook" in chapter 12 regarding Oracle XML Gateway.
So I don't use BPEL PM to do this.
I'm just using EBS with XML Gateway and Integrated SOA Gateway responsibilities.
When I tried to send the XML from A to B using OXTA, it's success, the data can be processed in B and could store in the database.
But when I tried to use SOAP, the XML message that has been sent from A is success, and when I check it on B (Integrated SOA Gateway -> SOA Monitor), the message is in there and I can see the SOAP request and response as well.
SOAP request:
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://xmlns.oracle.com/apps/fnd/XMLGateway" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <env:Header>
- <ns0:XMLGateway_Header>
<ns0:MESSAGE_TYPE>XML</ns0:MESSAGE_TYPE>
<ns0:MESSAGE_STANDARD>OAG</ns0:MESSAGE_STANDARD>
<ns0:TRANSACTION_TYPE>XKLB</ns0:TRANSACTION_TYPE>
<ns0:TRANSACTION_SUBTYPE>ORDER_DETAILS_XO</ns0:TRANSACTION_SUBTYPE>
<ns0:DOCUMENT_NUMBER>9282</ns0:DOCUMENT_NUMBER>
<ns0:PARTY_SITE_ID>142</ns0:PARTY_SITE_ID>
<ns0:USERNAME>cons.ade</ns0:USERNAME>
<ns0:PASSWORD>cons.ade</ns0:PASSWORD>
</ns0:XMLGateway_Header>
</env:Header>
- <env:Body>
<ns0:ReceiveDocument xsi:type="xsd:string"><ORDER_DETAILS_XO xmlns=""> <ORDER> <ORDNO>100002</ORDNO> <ORDWT>100002</ORDWT> <RDATE/> <CITY>JAKARTA</CITY> <ZIP>17121</ZIP> </ORDER> </ORDER_DETAILS_XO></ns0:ReceiveDocument>
</env:Body>
</env:Envelope>
SOAP response:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header />
- <env:Body>
- <ReceiveDocument_Response xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">
<ResponseCode xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">200</ResponseCode>
<ResponseMsgId xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">BD4EAD91E76051D5E0440021287448DA</ResponseMsgId>
<ResponseInfo xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">Document received and pushed into queue for asynchronous processing. Enqueued message id is 'BD4EAD91E76051D5E0440021287448DA'.</ResponseInfo>
</ReceiveDocument_Response>
</env:Body>
</env:Envelope>
But the problem is the message that has been got in B can't store into the database yet.
I had already changed the Queue in the XML Gateway -> Define Transaction, from APPLSYS.ECX_IN_OAG_Q (this is for OXTA) to APPLSYS.WF_WS_JMS_IN.
After I invoke the webservice and the SOAP message has been got in B, I checked APPLSYS.WF_WS_JMS_IN in database and there is 1 record, the value of USER_DATA column is:
((, , , , , , ((BES_EVENT_NAME, 100, oracle.apps.fnd.wf.ws.inbound.xmltx.receive, , 27), (BES_EVENT_KEY, 100, 796550960, , 27), (BES_PRIORITY, 200, , 1, 23), (BES_FROM_AGENT, 100, [email protected], , 27), (BES_TO_AGENT, 100, [email protected], , 27), (MSG_ID, 100, 1334117503435, , 27), (ECX_MESSAGE_TYPE, 100, XML, , 27), (ECX_MESSAGE_STANDARD, 100, OAG, , 27), (ECX_PARTY_SITE_ID, 100, 142, , 27), (WS_PORT_OPERATION, 100, ReceiveDocument, , 27), (ECX_TRIGGER_ID, 100, 7101, , 27), (UserId, 100, 3020, , 27), (ECX_USERNAME, 100, CONS.ADE, , 27), (ECX_TRANSACTION_SUBTYPE, 100, ORDER_DETAILS_XO, , 27), (ECX_PASSWORD, 100, CONS.ADE, , 27), (ECX_DOCUMENT_NUMBER, 100, 9285, , 27), (BES_PAYLOAD_OBJECT, 100, false, , 27), (ECX_ATTACHMENTS, 100, , , 27), (ECX_TRANSACTION_TYPE, 100, XKLB, , 27), , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , )), 0, , )
When I tried to select APPLSYS.WF_WS_JMS_IN for the 2nd time, there is no result, which means the business event has been triggered, right?
So in this point I still don't have any idea why the process is (likely) ended after enter the Queue and the message can't store into B's database yet.
Do I miss any setup when changing from OXTA into SOAP protocol to send XML message?
Any urgent help most appreciated.
Best Regards,
Rheza

Hi,
Did you ever get any answers to this? We are thinking about the same thing.
Thanks
Darma
[email protected]

How to use's mail's "perform mail action with message"

I can't for the life of me figure out how to use "perform mail action with message", I basically want to create a script that get's used on a rule from Mail, but nothing I try will work.
This is what I started with...
tell application "Mail"
perform mail action with message msgs for rule theRule
end
end
This doesn't compile i've seen an example of it being used like this...
using terms from application "Mail"
perform mail action with message msgs for rule theRule
end perform
end using
this also doesn't compile, so I'm not sure what it's wanting

This is one of those annoying things about programming - you have to arrange and spell things exactly right (this gets worse if you have fat fingers). You can look at the dictionary for Mail to see the specifics - in your example you are missing an "s" at the end of the word "message":
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">tell application "Mail"
perform mail action with messages msgs for rule theRule
end tell
</pre>

Mail Loosing Inbound messages

Similar Messages

Maybe you are looking for