Mail Message ERROR

When I try to click a link on my mail, an error message says: "Mail was unable to open the URL 'http://' no associated application could be found.

Use Safari or RCDefaultApp to choose the default web browser; in older Mac OS X versions, the control is located in System Preferences instead of Safari.
(28927)

Similar Messages

Failed to send the mail message error code: -49

Hi,
When sending mail outside the company (outside the domain), getting this error: Failed to send the mail message error code: -49
When sending mail internally (within the domain) successfully submitted.
I was looking for notes relating to the subject but could not find anything that helped me
I would appreciate your help,
Hilla

Hi Gordon,
The problem was solved, the customer changed his ip adress on the server and it's OK now!
Thank you !!
Hilla.

Sending Mail- Messages Errors

My mail was working fine and then suddenly I get error messages saying "The message could not be delivered and will remain in your outbox until it can be delivered. The server "smtp.mac.com" refused to allow a connection on port 25."
The message never gets delivered and sits in my outbox! What can i do? I have mail version 2.1 . Maybe I downloaded a new version of mail? I have no idea.
Can you help?
Lee

Your ISP may have started blocking port 25 as an anti-spam measure. You will need to change the port you using to send mail. Try port 2626 or 587 instead.
To change the port in Mail:
Mail > System Preferences > Accounts > (choose the email account you need to change the port on) > Advanced
The port setting is at the bottom of the Advanced tab window.

EmailMsg::Send::Failed to send the mail message error code: -49

can enyone explain me this error.
I want to send emails via IIS.
i've tested SBO Mailer to connect to IIS. TEST is succesfull.
SAP 2007 PL8

The sending user must have an email address set up in their user record (Administration>set up>general> users). Check this first, then, do a search in the SAP notes on error 49, you should find at least two notes for troubleshooting this eror message

Sender Mail Adapter Error: exception caught during processing mail message;

HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
Following are the details provoding in sender mail adapter:
URL: provided url in the format: pop://<server name>
Authentication method: plain
provided user credinetions to access mails.
poll interval - 1min
content encoding none.
processing parameters : quality of service-exactly once
Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
Verified for unread mails in the mail box and made sure that there are few unread mails.
Also, created data types and other components in IR and completed mapping.
But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
please let me know what needs to be done to resolve this error.
Thanks.

HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

SHA1 digest error for javax/mail/Message.class

it's been 4 hrs that i am striving to get around this .....Does any body has any idea why this error appears and how to remedy it ....
help will be much much appreciated....

Either:
1. Your mail.jar is corrupted, or
2. You have more than one copy of the javax.mail.Message class in your CLASSPATH.

MF Message Error Domain Error 1032 when trying to access my yahoo mail

How do I resolve this issue of retrieving my mail from Yahoo? Message MF Error Domain Error 1032. I've changed my password via my computer. Still
unable to retrieve mail and error message keeps popping up.

All of you are welcome. Glad this worked for you JTGreig, TJE173 and AMBDavid
Cheers

I am having trouble setting up my Yahoo! e-mail account on my phone...it asks for my Password and I type it in correctly and, carefully, but I get an error window, "MF Message Error Domain error 1032" -what does thi smean and how can I get around it?

I am having trouble setting up my Yahoo! e-mail account on my phone...it asks for my Password and I type it in carefully and correctly, but I get an error window, "MF Message Error Domain error 1032" -what does this mean and how can I get around it? My password is long and convoluted, but it works when I type it in on my main Mac workstation, just fine.....what gives?

try restarting the phone and try again

Mail gave error message, failure to move e-mail to trash can. Mail has frozen and will not quit and is stopping a machine shutdown. Problem persisted even after power was trend off for a minute.

Mail gave error message, failure to move e-mail to trash can. Mail has frozen and will not quit and is stopping a machine shutdown. Problem persisted even after power was trend off for a minute.Iideas please

OS X: How to quit an unresponsive application using Force Quit
Back up all data. Rebuild the mailbox. Try to delete the message again.

Write error. [Error sending mail message to SMTP server. Return code: [].]:

Hi ,
I am getting the below error when scheduling a report which is larger in size in excel format.
write error. [Error sending mail message to SMTP server. Return code: [].]: [CrystalEnterprise.Smtp]
The same error does not come up when sending the same report in XLS format using outlook.
Can some one confirm if this error is because of the size of the report as I see a different error in XIR2 incase the size the exceeds the email server limit.
~Neethi

Hi,
this could be
Maybe you have different limits for service smtp account (which the BO Server should use) and User smtp accounts.
Thats why you can sent it via outlook and not from the BO Server.
Regards
-Seb.

Write error. [CrystalEnterprise.Smtp]: [Error sending mail message to SMTP

Hi,
The below error messgage i am getting while scheduling report in CMC. My report getting refreshed successfully but while posting refreshed file(Excel) it is not posting and throwing below error.
Error Message:
write error. [CrystalEnterprise.Smtp]: [Error sending mail message to SMTP server. Return code: [].]
please provide some help on this.
Thanks
Vivek

Hi Vivek
Mails to the destinations are delievered by SMTP server. Size of the file in the mail depends on the SMTP server.
For example, If SMTP server does not permit file size more than 2MB then that file won't be delievered.
For testing purpose copy the instance generated in Filestore to your local drive and send this instance using your mail client to
desired destination.
You can try sending large size file from your mail client to test SMTP server capacity of sending large size file.
Thanks,
Hrishikesh Parasnis

I try to send emails after I have recieved. They are hotmail accounts. message says"cannot send mail and error occurred delivering this message. I have tried deleting and restarting. I have tried shutting phone down completely and restarting. no help...

I am trying to send emails via a hotmail account on my i phone 5 and get the following message despite recieving e mails. "cannot send mail an error occurred delivering this message"... i have tried to restart phone to no avail. I have tried to delete and re input account to no avail. I need help

Hello lclaunch22
You may need to validate the account with Hotmail. When logged in to the Hotmail account on a computer, there are instructions on how to do this.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/ht1694
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Hi i'm trying to delete my bulk mail messages but it keep telling me this message"The IMAP command "DELETE" failed with server error: DELETE failed - Mailbox is reserved "

Hi i'm trying to delete my bulk mail messages but it keep telling me this message"The IMAP command “DELETE” failed with server error: DELETE failed - Mailbox is reserved " is there any way to delete of stop messages from coming into it ??
thanks

Sounds like the mail server thinks you are asking to delete the bulk-mail mailbox instead of some/all of the messages within it.
How are you trying to delete your bulk mail messages? That is, what are you doing, step by step, up to the error message.
What you should probably be doing is selecting the bulk mail mailbox, selecting one of more messages inside it, then hitting the "delete" key.

Mail Message ERROR

Similar Messages

Maybe you are looking for