Mail, messages do not arrive in my mailbox until I open he mail applcation
My messages stop coming in my mailbox until i open the mail application. For instance, yesterday it seems that I have received 4 mails. But nothing appears in the dock... It was working before.
No, I know for fact that it should check or "fetch" every 15 minutes to see if there is any new mail on all accounts that are not pushed. If they are pushed it should be more immediate.
Similar Messages
-
New mail messages will not show on my iPhone until I open mail...
I am on the 1st gen iPhone and no new mail will show up from the home screen (with the little red bubble) until mail is actually opened, and then it checks for mail. For some reason it will not automatically check. Very annoying.
I did a reset by holding the home and top button. No changes. I then restored it. No changes. I am at a loss. Any help is greatly appreciated.
Thank you!No, I know for fact that it should check or "fetch" every 15 minutes to see if there is any new mail on all accounts that are not pushed. If they are pushed it should be more immediate.
-
Exchange Server 2013: incoming messages are not delivered into user mailboxes occasionally
Exchange Server 2013 CU1, two mailbox servers (DAG, only one mail database), two CAS servers (NLB cluster). Two Sendmail/CentOS-based SMTP relays route mail between Exchange servers and Internet (incoming mail is routed to NLB cluster name).
Usually mail flow is OK: messages are sent and received normally. However, I've got several complains from different users. They state that occasionally they don't receive messages that were sent to them from outside. Tomorrow morning I've decided to
investigate the issue.
So, we have a message sent from Gmail account that was not delivered in user mailbox. It was received and routed to Exchange by Sendmail host:
Jun 27 22:06:37 MX01 sendmail[12169]: r5RG6HC8012166: to=<USER_ADDRESS>, delay=00:00:19, xdelay=00:00:19, mailer=smtp, pri=124702, relay=NLB-FQDN [NLB-IP], dsn=2.0.0, stat=Sent (<CAHgK_sjEkj41htuVsutMP3XhgR5RRDs8-EgSC-UfHoaiHWFj=A@mail.gmail.com>
[InternalId=13069585481819] Queued mail for delivery)
Running Get-MessageTrackingLog applet on the mailbox servers displayed the followed log entries for the message:
DB Server #1:
22:11:18 HAREDIRECT
22:11:18 RECEIVE
22:11:18 AGENTINFO
DB Server #2:
22:11:18 HARECEIVE
22:12:44 HADISCARD
So, we can see that the message was placed into shadow queues, but was NOT delivered into mailbox (no DELIVER status entries). Also pay attention to the timing. Time on all the servers is in sync, but Sendmail timestamp is 22:06, and Exchange timestamps
are 5 minutes behind it.
Today a message sent to the same address from the same Google mailbox was received by Exchange and placed into user mailbox with no glitches.
We use Exchange antispam system activated on Exchange mailbox servers. Spam is never dropped silently. It is either returned to sender (SCL 9) or placed into quarantine mailbox (SCL 6 and above). I'm pretty sure that the lost message was not in the quarantine
mailbox this morning, and the sender didn't receive any NDRs.
Any ideas what to investigate next?Hi,
Do you mean the emails are placed in the Shadow Redundancy queue?
Shadow Redundancy
http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Email message could not be moved to mailbox trash
email message could not be moved to mailbox trash
Back up all data. Rebuild the mailbox. Try again to delete the message.
-
HT4519 i'm getting 'THE MESSAGE COULD NOT BE MOVED TO MAILBOX TRASH message what gives?
After setting up my corporate email accound, everytime I delete a received message the following message appears :
Unable To Move Messages
The Message Could Not Be Moved to Mailbox TRASH. Is there a way to fix this???Well, a whole 40 minutes have passed without a reply, suggestion or an idea. I found the solution somewhere else.
-
Lync 2013 external to internal IM is slow or messages do not arrive
Hi,
I'm building a Lync 2013 setup on Windows Server 2012. Internal Lync 2013 standard server with Lync 2013 edge server in a DMZ. No federation.
Internally al users are able to chat, audio/video and conferance.
My problem is that external users are able to sign in and start a chat with an internal user but it looks like communication is only working in one way.
Example:
User 1 is external;
User 2 is internal;
User 1 starts IM with user 2 and says "hi"
User 2 receives the IM and accepts and is seeing the "Hi" messages from user 1.
User 2 reply's with "Hi" back and that messages does not arrive at user 2. Some time's not at all, some times after a minute or 2.
When user 1 is receiving the reply user 2 still see's the rotating dot's that the message is beeing send. and after a while user 2 receives: "This message may not have been sent to User1
because there was no response from the server."
The situation seems to occures only from internally to externally and also with both users externally. I cannot see any error's in the event logs of the Internal or Edge server. De debugging tools is showing me error's like:
Text: Message or one of its headers caused SIP transaction processing error
Result-Code: 0xc3e93f5b SIPPROXY_E_TRANSACTION_TIMEOUT
Text: Message was discarded by the application
Result-Code: 0xc3e93ec6 SIP_E_AUTH_CANNOT_CHALLENGE
Audio/video requests are also arriving at the other user but are unable to establish a connection.
I can't really figure out what is going wrong. Certificates are correct, i think firewall rules are in place otherwise i have no communication at all i'm guessing. Routes also seem ok.
Some help would be great
Regards
PascalHi,
The internal user Lynctest is sending a message to pslijkerman who is connected externally.
User pslijkerman receives the messages but the lynctest user keeps seeing rotating dots (processing message or something) after 1 minute or so the following messages is displayed in the Lync Im screen for user lynctest.
======
This message may not have been sent to Pascal Slijkerman because there was no response from the server.
======
This is some logging from the internal lync server.
===========
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.056.0013034f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1304
Direction: incoming
Peer: srv-domain34.domain.nl:49510
Message-Type: request
BYE sip:[email protected];opaque=user:epid:L30jBQ2CP1G71x2KsIF2cAAA;gruu SIP/2.0
Start-Line: BYE sip:[email protected];opaque=user:epid:L30jBQ2CP1G71x2KsIF2cAAA;gruu SIP/2.0
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Route: <sip:SRV-domain34.domain.nl:5061;transport=tls;opaque=state:T:F;lr>;tag=BDBD058532075001772DF63E1A794C59
Max-Forwards: 69
Content-Length: 0
Ms-client-diagnostics: 52112;reason="Callee did not receive an ACK for the 200 OK"
$$end_record
TL_INFO(TF_DIAG) [0]226C.2528::04/09/2013-07:53:17.087.00130d06 (SIPStack,SIPAdminLog::WriteDiagnosticEvent:1207.idx(778))[2737352855] $$begin_record
Severity: information
Text: Routed a request that came from a server trusted for routing
SIP-Start-Line: BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
SIP-Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
SIP-CSeq: 1 BYE
Peer: 10.xx.xx.30:52211
Data: destination="[email protected]"
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00130d62 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1304
Direction: outgoing
Peer: 10.xx.xx.30:52211
Message-Type: request
BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
Start-Line: BYE sip:10.xx.xx.30:52211;transport=tls;ms-opaque=07531f0291;ms-received-cid=11400;grid SIP/2.0
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 10.xx.xx.37:5061;branch=z9hG4bK445B1BFE.41682B6C1B09AC7D;branched=FALSE;ms-internal-info="bajkITWtf7W6iXpPN4ntXDe2Uuk9SpjNhAw17jrz6DmT9sK2hB10T2EQAA"
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Max-Forwards: 68
Content-Length: 0
Ms-client-diagnostics: 52112;reason="Callee did not receive an ACK for the 200 OK"
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00130f28 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1306
Direction: incoming
Peer: 10.xx.xx.30:52211
Message-Type: response
SIP/2.0 481 Call Leg/Transaction Does Not Exist
Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 10.xx.xx.37:5061;branch=z9hG4bK445B1BFE.41682B6C1B09AC7D;branched=FALSE;ms-internal-info="bajkITWtf7W6iXpPN4ntXDe2Uuk9SpjNhAw17jrz6DmT9sK2hB10T2EQAA"
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Content-Length: 0
Ms-client-diagnostics: 52085;reason="Dialog does not exist"
$$end_record
TL_INFO(TF_DIAG) [0]226C.2528::04/09/2013-07:53:17.087.0013142e (SIPStack,SIPAdminLog::WriteDiagnosticEvent:1207.idx(778))[2737352855] $$begin_record
Severity: information
Text: Response successfully routed
SIP-Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
SIP-Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
SIP-CSeq: 1 BYE
Peer: srv-domain34.domain.nl:49510
$$end_record
TL_INFO(TF_PROTOCOL) [0]226C.2528::04/09/2013-07:53:17.087.00131486 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:2420.idx(196))[2737352855] $$begin_record
Trace-Correlation-Id: 2737352855
Instance-Id: 1306
Direction: outgoing
Peer: srv-domain34.domain.nl:49510
Message-Type: response
SIP/2.0 481 Call Leg/Transaction Does Not Exist
Start-Line: SIP/2.0 481 Call Leg/Transaction Does Not Exist
From: "" <sip:[email protected]>;epid=36889192ba;tag=c84477430c
To: "lynctest"<sip:[email protected]>;tag=ffbc4dc4e5;epid=b58bd39e10
Call-ID: f295aa80628b4c7e8e0896ed216ec5b2
CSeq: 1 BYE
Via: SIP/2.0/TLS 172.xx.xx.1:49510;branch=z9hG4bK49BC5E54.654FC7DF7B8FBC80;branched=FALSE;ms-received-port=49510;ms-received-cid=13800
Via: SIP/2.0/TLS 192.xx.xx.164:49524;received=84.xx.xx.204;ms-received-port=49524;ms-received-cid=E00
Content-Length: 0
Ms-client-diagnostics: 52085;reason="Dialog does not exist"
$$end_record
============
Thanks
Regards
Pascal -
MMS message can not be sent or received until data connection is restored.
Error: MMS message can not be sent or received until data connection is restored? Droid X wont send or receive pictures.
I had this same issue. I downloaded APN Settings Shortcut from the play store and it worked for a day then it stopped again. The solution is easier than that... download the Verizon Messages app... bingo - NO more issues...
-
Incoming messages comes into INBOX folder only in 1 IOS ( iPhone ) device and not in other devices ( iPad and iMac ).
Clicking on mail folder, messages are downloaded as in manual mode.
Why messages are not pushed at same time in all devices ( mac + IOS devices ) ?
Thanks for support me, hoping to be of help to who will have this problem worldwide.
[email protected]While trying to find a solution, I am discovering my mail problem is much deeper than just messages not appearing in the "Sent" mailbox. I have found some of them appearing in the "Trash" mailbox and some appearing there mulitple times, often with my account name in the "TO" field. I'm also finding some unread mail there that should be in the "Junk" mailbox. So it would appear there are many problems with ISO 7 and mail. I have tried deleting and restablishing the account and two complete iPhone restores. Neither helped. What is the biggest puzzle is that on my second iPhone, the one that upgraded without an error, mail is working perfectly well. Has anyone found a solution to any mail problems on ISO 7 devices? If so, please reply.
-
Sent Messages are not saved in Sent Mailbox
It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful
The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server. -
"Message could not be moved to mailbox Trash" Error message
When I delete an email, either single or multiple, I get the message "Unable to Move Message" with the explanation "The message could not be moved to the mailbox Trash....OK". Other than that it all seems to work OK and the emails do get deleted but how do I stop the message popping up every time?
Thanks in advanceFrog129 wrote:
When I delete an email, either single or multiple, I get the message "Unable to Move Message" with the explanation "The message could not be moved to the mailbox Trash....OK". Other than that it all seems to work OK and the emails do get deleted but how do I stop the message popping up every time?
Thanks in advance
I've had a similar problem, though it doesn't seem to happen with 4.2 - I think this was due to the fact that you can't do much with Exchange connections (e.g. for Google Mail) when you are not online. In iOS 4.2 the delete button stays grey'ed out when you are not online. -
Several times my Sent message does not appear in Sent Mailbox
I have had many instances when sending messages (usually replies to messages in my Inbox) where they appear in the Mail Activity box and then following the "sent" sound, fail to appear in the Sent mailbox. When clicking on the Reply arrow I get the message "Mail was unable to find your response to the message “Re: Test”. You may have deleted the message." I have tried sending test messages and they seem to work OK. However over the last two days at least three replies to messages have disappeared in this way. The messages do not appear in my MobileMe sent box either. Using my non MobileMe address seems to work OK with the message appearing in the Sent Mailbox. Any ideas?
From reports on this site, Yahoo mail doesn't work reliably with Mail. The following steps may help.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results. -
I set up my emails so when they arrive on my computer, they would also arrive on my Ipad. The problem I'm having is there are times when an email arrives on my Ipad but not on my computer. Unless I open the email on my Ipad, it will not open on my computer. How can I have the two divices work in unison where the emails arrive on both at the same time?
Both libraries would need to have been setup to use home sharing with the same Apple ID in order for that to work.
-
Suddenly, some mail messages do not arrive (both Mac Mail and MobileMe)
Since Wednesday (August 20), I simply no longer receive email messages or replies from people I have had in my address book for years. The two senders I know of, via chat, are in my family, and I have never had problems receiving from them before (again, that I know of). They continue to send messages and replies, but they do not show up in Mac OS X Mail nor on the "MobileMe" website. These folks are not getting their messages to me returned undeliverable, nor am I getting them in my "Junk" folder (just in case you're wondering). It so happens the two senders that I know of both have aol.com email addresses.
Any suggestions as to where these messages are going, or how to get .Mac (er, MobileMe) support? It seems any way to get .Mac support by email has vanished from the Apple website. (Hey, why is that, by the way? It's a PAY service after all.) I know MobileMe wasn't the smoothest launch ever, but somehow I don't think it is specific to MobileMe (except of course that the mail server is the mail server).
Thanks!More information: This is only applicable to SOME email senders. I cannot be sure exactly how many or which other senders are not having their messages delivered to me, I AM still receiving various emails. These persons have simply asked me, via chat, why I haven't been responding to their emails...
-
Sent messages do not appear in Sent mailbox
Using a pop account, when I send a message it disappears. It does not send and it does not appear in my Sent mailbox.
I know it does not send because no one receive the email.
I have tried rebuilding the Sent mailbox.
I have tried selecting the Sent mailbox and then using the mailbox menu to set sent mail to go there, but this option cannot be selected (it's faded out) in the mailbox menu.
This is driving me to distraction...While trying to find a solution, I am discovering my mail problem is much deeper than just messages not appearing in the "Sent" mailbox. I have found some of them appearing in the "Trash" mailbox and some appearing there mulitple times, often with my account name in the "TO" field. I'm also finding some unread mail there that should be in the "Junk" mailbox. So it would appear there are many problems with ISO 7 and mail. I have tried deleting and restablishing the account and two complete iPhone restores. Neither helped. What is the biggest puzzle is that on my second iPhone, the one that upgraded without an error, mail is working perfectly well. Has anyone found a solution to any mail problems on ISO 7 devices? If so, please reply.
-
Sent messages do not appear in Sent Mailbox IOS 7
I upgraded my iPad to IOS 7 using WiFi, but did not first check to see if iTunes was current. (I don't think this is relevant to this particular problem, but perhaps it is). I then upgraded one iPhone (4) to IOS 7 on my Mac (10.7.5) after updating iTunes. Both the iPad and this iPhone work fine. I then tried upgrading my second iPhone (4) on my Mac and got an error message that the upgrade failed. I was instructed to resotred the iPhone to factory settings, restored my settings from a backup and then re-sync all my personal music, photos and apps. Took about 2 hours. Everything is fine execpt when I send mail on any device (I'm not using iCloud for mail), or my Mac, the mail does not appear in the "Sent" mailbox just on the iPhone that failed the IOS 7 upgrade. It does appear in the Sent Mailbox only when the mail is sent from that iPhone. I've checked all my settings and believe they are correctly set to save all mail to the server (AOL) and the server preferences as well. I repeated the entire restore process and still no change. I know, it's not a big problem, but it can be when I'm away from home and need to read mail I've sent, or actually be sure it was sent. Any ideas or suggestioins to fix this? Thanks!
While trying to find a solution, I am discovering my mail problem is much deeper than just messages not appearing in the "Sent" mailbox. I have found some of them appearing in the "Trash" mailbox and some appearing there mulitple times, often with my account name in the "TO" field. I'm also finding some unread mail there that should be in the "Junk" mailbox. So it would appear there are many problems with ISO 7 and mail. I have tried deleting and restablishing the account and two complete iPhone restores. Neither helped. What is the biggest puzzle is that on my second iPhone, the one that upgraded without an error, mail is working perfectly well. Has anyone found a solution to any mail problems on ISO 7 devices? If so, please reply.
Maybe you are looking for
-
When I connect Apple TV to my samsung tv I get a screen message that says ...mode not supported....what does this mean..and how can I fix it ? Thanks
-
Using the camera on my iPad 2, I can record videos, but can't get them to play back. Can you help me with this? Thank you!
-
Retina MacBook Pro 15" up to 210 degrees
I got a app to see hpw hot my Mac is getting. Usin the internet it stays around 109 degrees but when gaming it got up to 210 degrees but majority of the time it stayed around 190/192 degrees. Is this a problem?
-
I need to configure SNMP on our company Aironet 1130. I am told there is a tool we can use that will allow us do the configuration from a PC vs connecting directly to the device.. If that is true, where can I download it?
-
Bellsouth outgoing mail settings
Please help! I can receive mail but I cannot send mail thru my Mac Mail. Can someone confirm the settings? I have tried so many. Thanks!!