Mail messed up since 5.0.1 update

My mail is messed up since the iOS 5.0.1 update.
In All Inboxes, it Checks for Mail endlessly and there are numerous 'No Sender, No Subject' emails with dates of 12/31/69 that I cannot delete.
Any suggestions?

Well, umm, NVM, rebooted and they're all gone.
Whew!

Similar Messages

Mail constantly crashing since 10.5.8 update

Mail has been unresponsive since the 10.5.8 update. I have sent six crash reports just today. I first noticed the problem when I tried to search for an older email. First, I get the beach ball, and then when it finally does start searching, it doesn't find any mail - even when I search for something I know is there - and the search Entire Message option is grayed out.
I have rebuilt all mailboxes, with no improvement; then I deleted all of my accounts and tried using only my MobileMe account, with no effect; and removed my old preferences so I could start completely clean, with - you guessed it - no results.
I don't seem to have any trouble receiving or sending mail, but obviously I'd like the search to work, too

I was first alerted to the problem when several people sent messages to the effect of "why have you not replied to my message?" - when I had. People are not getting my sent messages. I tried to send message to myself and have gotten none of them. My outgoing mail server is my local ISP in Jamaica, mail.cwjamaica.com. I have never had any problems in the past. My Mail worked perfectly until a few days ago when my Mail was updated. When I send mail, everything appears fine on my end, but messages are not getting out. If I use my ISP's webmail, I have no problem sending messages, so I know the problem is between my outgoing server and Mail. It used to be that when I sent mail, there was a drop down where I could select different servers. This is now gone, but I have checked the settings in Preferences and all appears to be correct. Thanks Ernie!

Mail is broken since 10.8.2 update

I updated to v 10.8.2 two days ago, since then Mail has been broken. I can see the sender, date, a snippet of message in the in box column but cannot read the message if I attempt to highlight it or click to expand it. It is completely blank, no sender, no date, no subject line. I can read the message if I opt to return the mail, however, mail shuts down "unexpectedly" after I type five characters, an error box comes up to advise the problem will be reported to Apple and gives me the option of reopening. Reopening only makes the ugly cycle begin again.
I have attempted turning off mail and restarting it, taking all accounts offline and then bringing them back up, shutting down computer completely and go through regular start up, using restart. I attempted to copy the the area of the error message to be of better assistance but it was gone before I could click copy. It says 'Terminating app due to uncaught exception' and 'could not find our own bundle'... "throwing an exception".
Seems to be having a fair sized hissy fit, any patch to fix this bug or do I just deal with the inconvinience until the next update and hope for the best?
K-

Please ignore irrelevant responses to your question. Mail is at least as good as any other mail client for the Mac platform.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Yahoo mail Not Receiving since 4.2.1 update this morning

Ever since updating my iPhone 4 to 4.2.1 this morning I have not been able to get mail from my Yahoo mail account. I could send mail, but when i launch Mail I get the message "Cannot Get Mail. The connection to the server failed." I have tried a hard reset, and I have deleted and added the account two or three times. Nothing works. I can send email, but not receive. Am I missing something?
Any help will be welcomed and appreciated!
Thanks!

I have had the same thing happen since the update on both my iPad and iPhone 4. Then last night both devices suddenly started to work like normal and I had done noting to fix it -- and now neither my yahoo account nor business yahoo account works on iphone/ipad. this same problem with yahoo mail hing happened at the last iphone software update too... Very frustrating. When the last update came out I had to delete bot accounts from my phone and re-load them. that is probably necessary here again...

Mail goes offline since 10.5.4 update

In the week or so since I did the 10.5.4 upgrade, I've noticed that over the course of the work day (machine is not asleep, and network is supposedly always connected) when I look at my Mail Inbox I periodically see the little warning triangle - the one with the ! in it - next to my Inbox. This supposedly means that Mail cannot get online and is therefore offline. When I see this, I hit "Get Mail"...and when I do, Mail goes out and checks and goes "bonk" and all seems fine. Until it happens again...which could be within minutes or anytime thereafter.
(additional info...) Sometimes when I go to manually check mail (hitting "Get Mail") when the little triangle ISN'T present, this will cause the triangle to appear. Then I hit Get Mail a few times and it goes away. It seems like Mail attaching to the network is a bit of a hit or miss affair.
Thing is, this did not happen before 10.5.4. It's also happening on multiple machines (all Intel MBPs configured similarly) on 2 different networks. These machines have always been set to check for new mail once a minute...and that's clearly what they're trying to do. Before 10.5.4, this worked reliably; but now it doesn't. And again, NOTHING other than 10.5.4 is different. Same ISPs, same routers (all Airports), same MBP hardware. Airport signal strength (as seen in the menubar) seems fine and isn't visibly dropping bars.
Apparently what is happening is that Mail is periodically losing its network connection until you manually force a check for mail. This would imply that 10.5.4 broke something in the way that apps (e.g., Mail and perhaps Safari...which also seems to "not find server" sometimes now) access the network? Has anyone else noticed this?
Message was edited by: jsun

I just found this issue addressed on MacFixIt - http://www.macfixit.com/article.php?story=20080730133625417 is website. Below is a summary.
For some users, this problem is just a matter of corrupted settings files, and removing them may help. To do this, go to the /username/Library/Preferences/ folder and remove the file com.apple.Mail.plist, then restart the Mail application. When Mail starts, enter one account at a time and test each accordingly. For MobileMe users who were switched from .Mac, set up the accounts with the "[email protected]" address instead of the old "@mac.com" address.
I just followed directions and basically I re-created the email accounts. Fortunately, all my old emails still showed up. I hd to reset my preferred "views". I think the new set up process also reset my Comcast settings. A few months ago I had to reset ports (Comast refused to say why), so I will see what happens. But so far so good.

Ipad2 mail messed up since 6.0

Since upgrading to 6.0 my mail is very unreliable,sometimes none at all. Is there a fix?

Yes, like Yahoo mail, Gmail, comcast, etc.
Are you using Yahoo mail?
You might want to try deleting your mail account on your iPad and reinstalling it.

HT6030 I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is u

I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

I excepted firefox update and wish I never got involved with it I am so upset, it changed toolbars and everything and now I cant even get anyone to help. maybe you have a suggestion or you want to fix this since it was your update that created this mess

I excepted the firefox update and now wish I never got involved with it at all. I am so upset, it change my toolbars and everything and now I cant even get anyone to fix this. maybe you have a suggestion or you want to fix this since it was your update that created this mess.

See also:
*https://support.mozilla.com/kb/common-questions-after-updating-firefox
If you want to restore the Firefox 3 appearance and behavior in Firefox 4 and later then you can find some tips here:
* http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

Is it possible to write in superscript or subscript in mac mail since the OSX Mavericks update? At the moment I have to copy and paste from Pages!

Is it possible to write in superscript or subscript in mac mail since the OSX Mavericks update? At the moment I have to copy and paste from Pages!

I tried to figure this out myself and couldn't believe there wasn't a simple menu item to get this done. Seems there was in pre-Mavericks but not in Mavericks. Found several answers but they all reply to before Mavercks.
This is helpful and yet I'm left with "Wow! Apple really can make simple things difficult. Who would have guessed."

X201 pen and touch are kind of messed up since update

Hi guys,
few days ago i updated my system (x201 tablet w/ multitouch) with lenovo's update utility and installed all the normal windows7 updates. And a lot was messed up since then. most of it i could fix with google, or re-installing the drivers.. but here are two things i couln't fix, and I hope someone could help.
Note: I've got the latest drivers installed and re-installed them several times.
Before I start here are some changes I recognized.
In my Systempanel under the category "Hardware and Sound" there are two new things wich wasn't there before. One is called "Touch-Properties" and the otherone "Pen Tablet-Properties".
1.)
I am not able to re-calibrate my touchscreen. If I do it as I was used to following happens:
- I am opening "Tablet PC-Properties" from the system Panel -> Hardware and sound.
- pressing "calibration" for Touch
- I get the error Mesage: "A supportet touchscreen was not found on the system."
Multitouch is still working. but is a little off. So I wish i could calilbrate it.
2.)
My Pen behaves like a mouse. Wich means the eraser does not work. And the pen-button behaves differently. When I press the button while i am hovering over the screen. It produces a right click.
When I am pressing the pen down, no right click circle appears.
Anyway, when I want to calibrate my pen following happens:
- I am opening "Tablet PC-Properties" from the system Panel -> Hardware and sound.
- pressing "calibration" for pen
- the "Pen Tablet-Properties" program opens (same as the new one i mentioned before).
Now i can calibrate my Pen with this new software (which is Version 7.0.2-19 btw.)
In this Program I can change some settings, like:
-- Activate Eraser or how the right-click should behave (hovering or click&touch).
It doesn't matter what i enable or disable, my pen behavoir does not change.
It still behaves like a normal mouse. Which is PRETTY anoying when you use "Journal" or "OneNote".
does anyone has an idea how to fix it? I hope my problem description was kind of understandable and not too confusing :-)
I even tried to downgrade my divers, but i couldn't find any old ones.
best regards
Ben
EDIT:
I ALMOST fixed the pen-problem.
Read somewhere to download the "Tablet-PC" Drivers from WACOM Hompage (isd701-8_int.exe), which i did.
Now at least the pen works like a pen again (which means... eraser and right click now works like it supposed to. BUT:
I am still not able to re-calibrate pen and touch...still get: A supportet touchscreen was not found on the system.
And now "Pen Tablet Properties" is now shown as: "ISD Tablet Properties". And when i try to open it i get an error: "No Tablett driver found".
Solved!
Go to Solution.

Ok. I solved it.
for all who encouter the same stuff here is how I did it:
- deinstall drivers ONCE AGAIN!
(I went to: control panel, deinstall, ISD Tablett drivers, restart)
- Then I deleted the folder "C:\program files\Tablett" in there are the driver remainings which wasn't deleted through the deinstall.
- To be sure I went to Hardware-Manager. On the top there was an unknown device, wich is the just deinstalled Wacom multitouch device. I deinstalled it once again though the Hardware-Manager (which is probably useless... nevertheless this is what I did).
After another restart I installed the newest multitouch drivers (7.02-19) which i downloaded from lenovos homepage... DO NOT USE LENOVOS UPDATE TOOL.. It didn't work for me.
After the install, another quick restart and violá it worked. :-)
Pen and Touch works. I can calibrate everything and can open Touch and Pen preferences in control-panel.
bye

E-mail app no longer works reliably on my Droid Turbo since the recent OS update

The native e-mail app has become unreliable since the recent OS update. All accounts (corporate, IMAP) have incorrect "Unread" totals. The corporate exchange account won't send e-mail. Clearing caches, uninstall/reinstall, all the usual don't bring resolution.
I've switched to third-party e-mail apps pending what I hope will be a fix.
Has anyone else seen this behavior? Thanks.

Okay, so tried one more thing and found the culprit - the problem no longer appears after I switch off 'Allow iTunes audio control from remote speakers' preference in iTunes. Apparently this problem happens due to an interaction between the AVR (Denon AVR-1912) and iTunes.
Leaving the message on forum, to help people with similar problem.

Mail since 10.7.1 update not loading images

Since 10.7.1 update, mail will no longer load remote images. i have unchecked and re-checked the load images option in preferences, but didn't change a thing. anyone have any ideas on this? thanks.

Two addition problems
1. I cannot reply to discussions in Safari
2. In mobileme not of the buttons work, I cannot select a letter, I cannot log out or select a mailbox

Mail won't preview messages since 10.9.3 update

Since the last OS update Mail does not like to preview. When I get new mail or scroll through recent messages the preview pane show "Loading.." or just dark gray (no content). If I double click and open the message in a window I get the same result.
Tried Genius Bar. They dleted a plist file and it help for a few minutes.
Tried to Rebuild. No deiscernable help there.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
Envelope Index
ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

HT204413 Apple Mail SSL issues since last security update 9th March 2015

Since the last security update (2015-002), Apple Mail keeps automatically re-checking the SSL box in my non-SSL email accounts. Other email clients are not affected (e.g. Thunderbird).
Anyone else having this issue? Can the update be backed out?
Cheers

Thanks Eric! Since changing this setting last night, all has been ok

Mail messed up since 5.0.1 update

Similar Messages

Maybe you are looking for