Mail "modulo no encontrado"

El mail no me adjunta ni adminte de ninguna manera las imagenes y sale "modulo no encontrado" por favor ayuda

Golden Shoes, Thanks for the response,
No, I haven't tried rebuilding my mailboxes. I had a disastrous experience with rebuilding my mailbox once, lost everything, and have never done it since. This was before Time Machine however, so maybe I'll give it a try. My 2 accounts are POP and a gMail account that is IMAP. I'm also having a problem with the POP account constantly asking for the password. When I enter it it tells me that it's wrong. I've checked keychain to make sure it has access and it does, and the password is correct. This experience with asking for the password is intermittent. The next time I open Mail, it will probably just go about it's business downloading with no problem. Something's amiss somewhere.

Similar Messages

Mail.app 3.6 won't connect to my POP3 server over a proxy

I updated to 10.5.7 the other day, and now Mail.app will not connect to my POP3/SMTP server via my proxy. This is a big problem for me as I work remotely a lot.
My setup - I use Proxifier (www.proxifier.com) and an SSH proxy so I point my Mail.app at the 192.168.* local address of my POP3 server on my home network. Whether I'm physically on the 192.168.* network, or remote but running Proxifier, Mail.app 3.5/10.5.6 would work flawlessly, as would any other application that addressed my local network (e.g., RDC).
Since upgrading to Mail.app 3.6/10.5.7, however, Mail.app will not connect when I'm using the proxy, but works fine when I'm physically connected to that network; it thinks that the servers is offline (even when using the Connection Doctor). All other TCP/IP applications including RDC continue to work fine via proxy. In particular, I can still use "telnet 192.168.x.y 110" and connect correctly to my POP3 server (and interact with it using the POP3 command set), so the issue would appear to be in Mail.app rather than in the connection itselof.
Since Proxifier only proxifies TCP and not UDP connections, is it possible that Mail.app 3.6 now attempts a UDP connection to a mail server to check if it's alive before trying TCP? If that's the case, can it be disabled? I don't know of any requirement that POP3 servers must be able to respond to UDP. Or is there a way I can drop back to 3.5 which DID work?
Thanks. Jim.

OK, I understand this now (thanks to DHJ for help with experimentation).
1) Mail.app 3.6 appears to ignore /etc/hosts completely. Mail.app 3.5 honored definitions in /etc/hosts.
I tested this by putting the known IP address of pop.gmail.com into /etc/hosts and calling it foo - I could not receive mail by pointing Mail.app at the server foo.
If this is so, it needs to be documented. This is extremely unusual behavior for a network application. I can see why Apple may be trying to protect us from hosts-hijacking, but this non-standard behavior has eaten up a lot of our time trying to figure it out.
2) Mail.app 3.6 appears to use a system proxy if one is defined. Mail.app 3.5 did not.
I tested this by verifying that Mail.app 3.6 could receive my mail (modulo the problem in 1) above) when any system proxy was defined, regardless of whether Profixier was running.
Every other application I know that uses the system proxy gives you the option of doing this (e.g., Firefox, Adium, and so on). This is why my Proxifier application was seeing nothing - Mail.app was going right to the system proxy. (FYI, Proxifier is designed to support proxies for applications that have not already been written to support proxies explicitly.)
The combination of 1) and 2) presented as a totally wacky complex problem. Viewed separately they don't seem so difficult to diagnose. Either way, they are both surprising, unusual and, to my knowledge, undocumented.

Ao anexar arq. .pdf em e-mail aparece anexado cmd.exe com 250 kb

Qualquer arquivo .pdf ao se anexar através da tela "Escrever e-mail", ao terminar o carregamento aparece como cmd.exe com 250kb. Outros tipos de arquivos são aceitos normalmente.
Os plug-ins da Adobe estão atualizados e o SO é Win 7.
Já foi scaneado com anti-virus via a propria máquina (instalado) e, via pen-drive (linux), não sendo encontrado nenhum virus ou malware.
O micro que estou usando não é o com defeito.

Bom Dia Diego. Neste micro o problema se apresenta tanto no Mozilla qto no Chrome, sendo indiferente o webmail em que se encontre.
Os antivirus e ferramentas de limpeza (adware, combofix, disk rescue,....) não apontam infecção.
Sei que posso resolver formatando e reinstalando tudo, mas com isso ficaremos sem conhecer a causa do problema.
grato

Attachment sent thru mail in PL/SQL code.

Hi.
I have a requirement..
I have to send bunch of an error description thru mail along with attachment says xls.All error should be club in xls and should be sent these attachement thru EMAIL.
Please provide a sample code for the same.
I have a code that mail can be send with the help of oracle supplied package UTL_SMTP.But how can I send the attachement thru mail.
Please provide a sample code.
Thanks

Hi!
Check this sample code - i don't know whether that satisfy ur requirement or not ------
CREATE OR REPLACE PROCEDURE CALL_SEND_MAIL
                         (p_sender varchar2,
                         p_recipients varchar2,
                         p_subject varchar2,
                         p_mailbody varchar2,
                         p_attachment varchar2 ) IS
v_recipients VARCHAR2(1000):=null;
flag          number:=0;
fil BFILE;
file_len PLS_INTEGER;
MAX_LINE_WIDTH PLS_INTEGER := 54;
buf RAW(2100);
amt BINARY_INTEGER := 2000;
pos PLS_INTEGER := 1; /* pointer for each piece */
filepos PLS_INTEGER := 1; /* pointer for the file */
v_file_name VARCHAR2(100) ; /* ascii file attachment */
v_file_handle UTL_FILE.FILE_TYPE;
v_directory_name VARCHAR2(100) := '/utlpath';
v_line VARCHAR2(1000);
conn UTL_SMTP.CONNECTION;
mesg VARCHAR2(32767);
mesg_len NUMBER;
crlf VARCHAR2(2) := chr(13) || chr(10);
data RAW(2100);
chunks PLS_INTEGER;
len PLS_INTEGER;
modulo PLS_INTEGER;
pieces PLS_INTEGER;
err_num NUMBER;
err_msg VARCHAR2(100);
v_subject     VARCHAR2(200);
v_mailbody varchar2(1000);
CURSOR C1 (p_proc_code varchar2) IS
select mail_id
from mat.mmat_mail
where mail_proc_code=p_proc_code
and mail_active='Y';
BEGIN
v_file_name := p_attachment;
if p_subject is null then
BEGIN
SELECT mail_subject
INTO v_subject
FROM mat.mmat_mail
WHERE mail_proc_code='VENDEXCH'
AND mail_subject is not null
AND rownum < 2;
EXCEPTION
WHEN no_data_found then
v_subject:=null;
END;
else
v_subject:=p_subject;
end if;
if p_mailbody is null then
BEGIN
SELECT mail_message
INTO v_mailbody
FROM mat.mmat_mail
WHERE mail_proc_code='VENDEXCH'
AND mail_message is not null
AND rownum < 2;
EXCEPTION
WHEN no_data_found then
v_mailbody:=null;
END;
else
v_mailbody:=p_mailbody;
end if;
if instr(p_recipients,'@') = 0 then
for vc1 in c1(p_recipients) loop
     flag:=flag+1;
     if flag=1 then
          v_recipients:=vc1.mail_id;
     else
          v_recipients:=v_recipients||', '||vc1.mail_id;
     end if;
     end loop;
else
v_recipients:=p_recipients;
end if;
BEGIN
conn := mat.send_mail.begin_mail(
sender => p_sender,
recipients => v_recipients,
subject => v_subject,
mime_type => mat.send_mail.MULTIPART_MIME_TYPE);
END begin_mail;
BEGIN
mat.send_mail.attach_text(
conn => conn,
data => v_mailbody,
mime_type => 'text/html');
END attach_text;
if v_file_name is not null then
BEGIN
mat.send_mail.begin_attachment(
conn => conn,
mime_type => 'text/plain',
inline => TRUE,
filename => v_file_name,
transfer_enc => '7 bit');
begin
v_file_handle := utl_file.fopen(v_directory_name, v_file_name, 'r');
loop
utl_file.get_line(v_file_handle, v_line);
mesg := v_line || crlf;
mat.send_mail.write_text(conn => conn, message => mesg);
end loop;
exception
when others then
null;
end;
utl_file.fclose(v_file_handle);
mat.send_mail.end_attachment(conn => conn );
END begin_attachment;
end if;
mat.send_mail.end_mail(conn => conn);
exception
when no_data_found then
mat.send_mail.end_attachment( conn => conn );
dbms_lob.fileclose(fil);
when others then
mat.send_mail.end_attachment( conn => conn );
err_num := SQLCODE;
err_msg := SUBSTR(SQLERRM, 1, 100);
dbms_output.put_line('Error number is ' || err_num);
dbms_output.put_line('Error message is ' || err_msg);
dbms_lob.fileclose(fil);
END;
Regards.
Satyaki De.

Mail Services

necesito un manual sobre la configuracion requerida para utilizar esta funcionalidad. Gracias

Hola...
El procedimiento no es muy extenso, por lo que te comparto un procedimiento..
PROCEDIMIENTO PARA EL ENVÍO DE CORREOS POR SBO.
CARACTERISTICAS
El envío de correos por SBO, se realiza a través de la un servicio que debe ser configurado y levantado en el servidor de SBO. El servicio antes mencionado es SBO Mailer, que se encuentra disponible en Server Manager de SAP B1
Este servicio trabaja con la configuración de una dirección valida de servidor SMTP.
CONFIGURACION EN EL SERVIDOR
1. Ingresar la dirección del SMTP Server en botón u201CSettingu201D
2. Ingresar los datos de conexión al servidor de SBO, botón u201CConnectionu201D
3. Determinar las BD, para las cuales el servicio estará disponible, botón u201CDatabaseu201D
4. Activar el servicio.
CONSIDERACIONES
Para que el servicio SBO mailer funcione en forma correcta debe tomarse las siguientes consideraciones:
1. Ingresar una dirección de correo valida en la ficha general de la pantalla u201CDetalles sociedadu201D, ubicada en el modulo de gestión.
2. Cada usuario que utilizará el servicio de correo debe tener ingresada su dirección de correo en las propiedades del usuario.
3. Cada maquina desde la que se enviaran correos con informes adjuntos, debe tener instalada una impresora PDF.
PROBLEMAS HABITUALES
1. Verificar que el servicio SBO Mailer este iniciado.
2. Cuando se desea enviar informes adjuntos, verificar la existencia de un controlador de scanner o Impresora PDF en la máquina de origen del e-mail.
3. Verificar que no existan saltos de línea en el campo u201CComentariosu201D para e-mails basados en documentos de marketing.
4. Verificar que cada máquina tenga acceso a las rutas de acceso utilizadas por SBO.

Traduccion automatica Mail

Mi terminal Iphone6plus IOS 8.1.2
Mi pregunta es la siguiente:
1. Existe alguna extensión o aplicación, para la traducción automática de idioma desde MAIL. (No quiero copiar y pegar estoy buscando lo que tiene gmail), para mi gusto MAIL es una aplicación interesante y me gustaría utilizarla para todo sin tener que recurrir a gmail. Para safari ya la he encontrado TranslateSafari
2. Existe alguna extensión o aplicación para la confirmación de lectura desde MAIL. (Ya sé que la confirmación de lectura, por ejemplo en gmail es para empresas y yo tengo una que utilizo cuando quiero mandar un email con acuse de recibo). Pero Si Mail o Ios se dotara de esta opción configurable (Ejemplo Microsoft Outlook) daría a sus usuarios más motivos para usarla)
3. Existe algún comando de voz para Siri para cuando realizo una llamada pueda activar altavoz, explico lo que quiero voy en el coche en manos libres despierto a Siri, le indico llamar a ANA, SIRI me responde llamando a Ana, pero tengo que tocar pantalla para activar altavoz existe algún comando Ejemplo Manos libres llamar ANA para esta función o no.

The AutoBCC function is not present in the current OS for the Q10.
If you are on an IMAP email server, normally there is a setting ON the email server to accomplish this AutoBCC of each email you send.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mail wont open and restart cancelled by mail

when I try to open my e-mail it wont open - it just doesnt do anything. When I try to download updates or shut down computer it says it is intereupted by mail. Help

Force Quit the Mail Application
Click the Apple Logo in the top left corner of the screen
Click "Force Quit"
Select the MAIL application
Force Quit the app
After the application is quit then you should be able to restart your computer.
The Application is fully quit when the is no little glowing dot under the application icon.

How can I disable sending from one Mail account?

Hello. I have a gmail account that I use to subscribe to various newsletters and accounts. So it's essentially a read-only account for me. But I too frequently accidently send mail from that account. Is there a way to prevent mail from being sent from that account?

I want to do the same thing as the OP. I have tried making outgoing server none. And checking "always use this server so it prompts me to edit the message so that I manually select a different address to send from inthe drop down list. And selecting a different account for composing. Actually, all my outgoing emails keep coming from the one account I am attempting to disable. Got any other ideas?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

How can I move an e mail account from one family pack to another

I have an e mail address (not main family pack e mail address) and I would like to move it to another family pack. Is this possible and if so how?
Thanks

Caroline12, Welcome to the discussion area!
I believe that your question is about a Mobile Me family pack account. If that is true, I believe that the answer is no.
But your probably should post your question in the Apple.com > Support > Discussions > MobileMe discussion area.

How can I display not only one account's mail but all in the central inbox?

I am changing from OSX (machines with OSX 1.8.5 and Mavericks) mail to Thunderbird.
However, one feature of OSX Mail I can't find in Thunderbird or have overseen it:
I use several mail accounts, that OSX Mail is showing me on top level in one general inbox.
Below that level, I can of course jump into the different accounts if needed to read mails only related to that account.
Is there a similar view in Thunderbird?
Thanks for any help
Christoph

http://kb.mozillazine.org/Global_Inbox

Filename in sender Mail Adapter

Hi Experts,
Brief about Scenario:
Invoice generated with PDF format in R/3 system and send to mail box. XI pick that file from mail box and deposited in SFTP Server.
Landscape in XI end.
Mailbox - - - XI 7.0 - - - SFTP
The file name generated with CompanyCode_InvoiceType_InvoiceNumber.PDF from R/3 system. So that Same file name should be deposited in SFTP Server . Here CompanyCode and InvoiceType are static and invoiceNumber generated dynamically with PDF format.
My question is How to get file name from mail box.
Thanks in advance.

Hups. I forgot what was your main problem
To get attachment file name you can try to implement you own adapter module as described [here|http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Get%20Attachment%20Name?bc=true]:
I found it in this [thread|Need to get the Mail attachment name as it is to the receiver file adapter;.
Please check that thread. The question is "not answered" but the last post states it was solved that way.

Cannot send email from yahoo mail client

I cannot open or send or attach anything to my email in the yahoo mail. I know there's nothing wrong with the email because it works on my laptop, just not on my computer. Could there be a setting problem, or a cookie problem or something?
I also cannot open Bonjour to see my printer settings. Everything was working fine yesterday.

outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.

Cannot send email from Mail through .mac account

I have recently opened a .mac account and started using the email service. It works fine online however I am having difficulty sending messages through the Mail application in Tiger.
Whenever I attempt to send a message, a dialog box appears saying "Cannot send message using the server smtp.mac.com".
I have tried looking at the setting in preferences. I have deleted and .mac a/c setting in Mail and re-set them up, all the problem persists.
Please help!

Hello David.
Who is your ISP used for connecting to the internet and are you accessing an email account snd SMTP server in Mail provided by your ISP?
If so, can you send messages with the email account and SMTP server provided by your ISP?
Most, if not all ISPs now block the use of SMTP servers that are outside of their network (or not provided by the ISP used for connecting to the internet) on Port 25 which is the standard port used for SMTP servers. Some ISPs allow the use of an authenticated SMTP server only (such as the .Mac SMTP server) that is outside of their network on Port 25 but some block its use regardless.
These restrictions are part of an overall effort to prevent spam emanating from the ISP's domain.
Something to try.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
Test if this resolves the problem.
If not and you are accessing an email account and SMTP server in Mail that is provided by your ISP used for connecting to the internet, select/use your ISP's SMTP server to send mail with your .Mac account which is invisible to all recipients.

Cannot send email from the Mail App?

I've had an izymail subscription for 1 year and just renewed it last week. I could never send an email from my Mail App without a window popping up stating "izymail cannot connect to the server" and the sending bar (along the bottom of the screen) just freezes and will not send.
I've a Hotmail account linked up to izymail. Anyone know how to fix this problem?

I fixed my problem - I deleted my email account on my iPhone, then tried to setup a new account. I had a few problems setting it up. It wouldn't recognize the incoming or outgoing servers and I lost my email altogether for a few hours. Then I changed every setting possible and finally figured out that I had 2-3 "Other SMTP Servers" as well as my "Primary Server". Once I deleted the Other SMTP Servers, my email worked and i'm able to send emails now!
I also think changing the "Server Port" number helped solve my problem also, and making sure "Use SSL" was turned off.

Mail "modulo no encontrado"

Similar Messages

Maybe you are looking for